2AAXF-HB9909Smart locator

Important tips 1. When pairing a device with Find My app, the phone will link to the Apple server. Pairing may fail because of network problems. The following action is recommended: 1. Change the phone’s network, such as switching between WiFi and mobile. The first pairing may takes a long time, please wait patiently. 2. Reset your item. 3.Repair with Findmy APP.2. When “Lost Mode” is enable, DO NOT REMOVE ITEM in the APP Your Item Locator will be locked and cannot be paired to a new device.3. The battery usage time varies depending on personal usage habits. Frequent use of the call function can accelerate battery consumption. Regulatory Safety Information Warning: The battery must be kept out of the reach of children. Due to chemical burns and potential esophageal perforation, swallowing may cause serious injury or death. If the child accidentally swallows the button battery, please call the rescue phone immediately and seek medical advice in time. Button Function: 1. Power on (Findmy function is on).Press the button once to turn it on. it should beep out a ringring chime indicating it is powered on.If the product is not paired, it will be closed within 3 minutes. You need to trigger the findmy function again to continue pairing.2. Power off (Findmy function is off).Hold the button for 3 seconds, release your hand on time, hear two beeps indicating it is powered off.3. Enable learn more information query.Press the button two times rapidly and you will hear a confirmation sound,This operation will be displayed on the findmy app to guide the person who gets the device to obtain the device information, such as the owner's contact information (if the item is set to the lost mode on the app), and the serial number of the device.4. Factory reset Press the button 4 times rapidly and then hold it a fifth time until you hear a ringring chime.A reset operation is required to enable the device to enter the pairing state again (synchronization of Findmy also requires simultaneous unbinding) and rebind the new Apple ID account. Keep in original package until ready to use;Immediately dispose of used batteries and keep away from children. Do NOT dispose of batteries in householdtrash. Getting Started1. Check For Updates To use the Apple Find My app to locate your Item Locator, the latest version of iOS, iPad OS, or macOS is recommended. 2.Power On Press the button on item locator, it should beep once indicating it is powered on and will be in pairing status.. 3.Add Your Item Locator 3.1 Start the APPOpen Find My APP on your supported iPhone or iPad.3.2 Connect your Item Locator How to replace the Battery: • Use the opening tool to carefully open the case in the small gap on the side of the item finder.• Replace the battery with a new CR2032 battery 3V. (Positive pole upward).• Carefully close the Item Locator. Unwanted Tracking Detection: If your iPhone detects that an unknown Item Locator is traveling with you, it will send you a notification. A sound will start playing so you will be able to find it. These alerts are only activated when an Item Locator is not connected to its owner’s phone, so your partner’s Item Locator will not trigger a sound if they are with you. Step 1. Choose the “Items” tap and then tap on “Add Item”. Or, tap on the “+” icon directly. Step2. Tap “ Other Supported Items ”. Step3. Make sure your Item Locator is close to your phone. Wait... until you see “ “HB02” ”, then tap “ Connect ”. Follow the pop-up to fill name and select an emoji; then tap “ Continue ”. There will be a request to add your Item Locator to your ID, then tap “ Continue ”. Tap “ Finish ” and your Item Locator will be set up. Manual Apple, Apple Find My, Apple Watch, Find My, iPhone, iPad, iPadOS, Mac, macOS and watchOs are trademarks of Apple lnc. iOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.The Apple Find My network provides an easy, secure way to locate compatible personal items using the Find My app on your iPhone, iPad, Mac, or the Find Items app on Apple Watch.To use the Apple Find My app to locate this item, the latest version of iOS, iPadOS, or macOS is recommended. The Find Items app on Apple Watch requires the latest version of watchOS. Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards. 5.Function Introduction Button Find Item When Out of Range • Enable the “Notify When Left Behind” toggle, you will receive a notification when you leave your Item Locator behind and it is no longer in range of your device.• Enable the “Notify when Found” toggle, when your Item location is seen by another Find My enabled device, you will receive a notification of its updated location.• Note: ” Notify When Found” can only be activated when your Item Locator is out of range. When Your Item is Lost • When Your Item is LostUnder “ Lost Mode ”, tap the “ Enable ” tab, a screen detailing Lost Mode will pop up, tab “ Continue ” . You can enter your phone number or email address and tap “ Next ”. You may enter a message that will be shared with the person that finds your item. Tap “ Activate ” to enable “Lost Mode”• Note: When “Lost Mode” is enabled, “Notification When Found” is automatically enabled. • Note: When “Lost Mode” is enabled, your Item Locator is locked and cannot be paired to a new device. Remove your Item Locator • Ensure “Lost Mode” is disabled, tap “ Remove Item ” tab, a summary will open, tap “ Remove ” to confirm. Reset your Item Locator • After successfully removing the Item Locator from the APP, press the Item Locator’s function button four times rapidly, and then hold it a fifth time until you hear a r…

Text truncated - open the document above for the full version.

SHENZHEN HOMELEAD ELECTRONICS CO., LTD. 11th Floor, Bldg 2, Phase 5, Fucheng Digital Innovation Shijing Road, Fucheng Street, Longhua, Shenzhen China Tel: 0755-29461426 Email: [email protected] Date: 2024-8-23 Attestation Letter FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 § 2.911(d)(5)(i) Filing FCC ID: 2AAXF-HB9909 SHENZHEN HOMELEAD ELECTRONICS CO., LTD. certifies that the equipment for which authorization is sought, is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely Yours, Signature: Print Name: Zhihua Gan Title: General Manager CFR 47 §2.911(d)(5)(i) Attestation Letter

SHENZHEN HOMELEAD ELECTRONICS CO., LTD. 11th Floor, Bldg 2, Phase 5, Fucheng Digital Innovation Shijing Road, Fucheng Street, Longhua, Shenzhen China Tel: 0755-29461426 Email: [email protected] Attestation Letter Date: 2024-8-23 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 § 2.911(d)(5)(ii) Filing FCC ID:2AAXF-HB9909 SHENZHEN HOMELEAD ELECTRONICS CO., LTD. certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely Yours, Signature: Print Name: Zhihua Gan Title: General Manager CFR 47 §2.911 (d)(5)(ii) Attestation Letter

U.S. AGENT LETTER OF ATTESTATION Date: 2024/8/1 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(7) Filing FCC ID: 2AAXF-HB9909 SHENZHEN HOMELEAD ELECTRONICS CO., LTD. certifies that, as of the date of the filing of the application, Iconsigh Inc. is our designated U.S. agent for service of process for the above referenced FCC ID. SHENZHEN HOMELEAD ELECTRONICS CO., LTD. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Iconsigh Inc. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Company Name: Iconsigh Inc. Address: 2310 Homestead Road, Suite C1, Los Altos, CA, 94024, USA FRN: 0033398652 Tel.: +1 (408) 320-9867 Email: [email protected] Signed by (printed name): Benjamin Kaur Signature: Applicant: SHENZHEN HOMELEAD ELECTRONICS CO., LTD. Address: 11th Floor, Bldg 2, Phase 5, Fucheng Digital Innovation Shijing Road, Fucheng Street, Longhua, Shenzhen China FRN: 0022945133 Tel: 0755-29461426 Email: [email protected] Signed by (printed name): Zhihua Gan Signature:

SHENZHEN HOMELEAD ELECTRONICS CO., LTD. 11th Floor, Bldg 2, Phase 5, Fucheng Digital Innovation Shijing Road, Fucheng Street, Longhua, Shenzhen China Tel: 0755-29461426 Email: [email protected] 2024-8-23 FCC Authorization FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We SHENZHEN HOMELEAD ELECTRONICS CO., LTD. the undersigned, hereby authorize Bay Area Compliance Laboratories Corp.(Shenzhen) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratories Corp. (Shenzhen) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988,21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: Print Name: Zhihua Gan Title: General Manager

SHENZHEN HOMELEAD ELECTRONICS CO., LTD. 11th Floor, Bldg 2, Phase 5, Fucheng Digital Innovation Shijing Road, Fucheng Street, Longhua, Shenzhen China Tel: 0755-29461426 Email: [email protected] 2024-8-23 FCC Confidential Authorization FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AAXF-HB9909 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, SHENZHEN HOMELEAD ELECTRONICS CO., LTD. hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature: Print Name: Zhihua Gan Title: General Manager

SHENZHEN HOMELEAD ELECTRONICS CO., LTD. 11th Floor, Bldg 2, Phase 5, Fucheng Digital Innovation Shijing Road, Fucheng Street, Longhua, Shenzhen China Tel: 0755-29461426 Email: [email protected] Declaration of Difference 2024-8-23 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern, We, SHENZHEN HOMELEAD ELECTRONICS CO., LTD. hereby declare that there are some differences between our Multiple Models and test products. Details as below: Products tested Name Smart locator Model HB02 (FCC ID: 2AAXF-HB9909) Multiple Models HB03,HB04,HB05,HB06,HB07,HB08,HB09,HB10,HB11, HB12,HB13,HB14,HB15,HB16,HB17,HB18,HB19,HB20,HB21,HB22, HB23,HB24,Smart tracker, Smart tag, Smart Finder, Card Finder, Smart Locator, Locator, Saulio tag, Smart Card □No Difference √Differences as the below Testing Products Multiple Models Details HB02 HB03,HB04,HB05,HB06,HB07,H B08,HB09,HB10,HB11, HB12,HB13,HB14,HB15,HB16,H B17,HB18,HB19,HB20,HB21,HB2 2,HB23,HB24,Smart tracker, Smart tag, Smart Finder, Card Finder, Smart Locator, Locator, Saulio tag, Smart Card Different sales channels have different product names, but the products are the same Notes: Products tested -the products tested by Bay Area Compliance Laboratories Corp. (Shenzhen) Besides the differences in the table above, we declare the products are identical We guarantee all the information provided above is true, and notice that we’ll bear all the consequences caused by any false information or concealing Sincerely Yours, Signature: SHENZHEN HOMELEAD ELECTRONICS CO., LTD. 11th Floor, Bldg 2, Phase 5, Fucheng Digital Innovation Shijing Road, Fucheng Street, Longhua, Shenzhen China Tel: 0755-29461426 Email: [email protected] Print Name: Zhihua Gan Title: General Manager

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: 2401V38257E-RF Page 1 of 3 EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: 2401V38257E-RF Page 2 of 3 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: 2401V38257E-RF Page 3 of 3

Product Name: Smart locator Model NO.: HB02 FCC ID: 2AAXF-HB9909 SHENZHEN HOMELEAD ELECTRONICS CO., LTD. MADE IN CHINA

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: 2401V38257E-RF EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: 2401V38257E-RF Page 1 of 4 EXHIBIT C - EUT INTERNAL PHOTOGRAPHS Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: 2401V38257E-RF Page 2 of 4 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: 2401V38257E-RF Page 3 of 4 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: 2401V38257E-RF Page 4 of 4 ANT

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2401V38257E-RF-00 TR-EM-RF003 Page 11 of 45 Version 3.0 FCC§15.247 (i), §1.1307 (b) (1) & §2.1093 - RF EXPOSURE Applicable Standard According to FCC §2.1093 and §1.1307(b) (1), systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. a) According to KDB 447498 D01 General RF Exposure Guidance The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where 1. f(GHz) is the RF channel transmit frequency in GHz. 2. Power and distance are rounded to the nearest mW and mm before calculation. 3. The result is rounded to one decimal place for comparison. 4. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test Exclusion. Measurement Result For worst case: For BLE: Frequency (MHz) Maximum Tune-up power # Calculated Distance (mm) Calculated Value Threshold (1-g SAR) SAR Test Exclusion (dBm) (mW) 2402-2480 -1.5 0.71 5 0.2 3.0 Yes Result: No Standalone SAR test is required

HB02 Antenna Manufacturer: Shenzhen HomeLead Electronics Co.,LTD Add: 1101,Unit 1, Fucheng Digital Innovation Park, No. 15-2, Shijing Road, Fucheng Street, Longhua, Shenzhen Operating Frequency: 2.402-2.480GHz Antenna type: PCB printed antenna Antenna material: FR-4 Antenna Size: 24.2*0.6mm Antenna drawing BAND Frequency (MHz) passive Gain (dBi) Efficiency (%) Audio RC 2402 -0.2 47.588 2440 0 52.727 2480 -1.2 49.877 2402MHz GAIN drawing： 2440MHz GAIN drawing： 2480MHz GAIN drawing：

Note: The information marked # is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Customer model name, addresses, names, trademarks etc. are included. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report must not be used by the customer to claim product certification, approval, or endorsement by NVLAP or any agency of the U.S. Government. This report may contain data that are not covered by the NVLAP accreditation and are marked with an asterisk “▼”. Bay Area Compliance Laboratories Corp. (Shenzhen) 5F(B-West) , 6F, 7F, the 3rd Phase of Wan Li Industrial Building D, Shihua Rd, FuTian Free Trade Zone, Shenzhen, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn TR-EM-RF003 Page 1 of 45 Version 3.0 TEST REPORT Applicant Name: SHENZHEN HOMELEAD ELECTRONICS CO., LTD. Address: 11th Floor, Bldg 2, Phase 5, Fucheng Digital Innovation Shijing Road, Fucheng Street, Longhua, Shenzhen China Report Number: 2401V38257E-RF-00 FCC ID: 2AAXF-HB9909 Test Standard (s) FCC PART 15.247 Sample Description Product Type: Smart locator Model No.: HB02 Multiple Model(s) No.: please refer to Product Description for Equipment under Test (EUT) Trade Mark: N/A Date Received: 2024/07/16 Issue Date: 2024/08/30 Test Result: Pass ▲ ▲ In the configuration tested, the EUT complied with the standards above. Prepared and Checked By: Approved By: Ekko Wu Nancy Wang RF Engineer RF Supervisor Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2401V38257E-RF-00 TR-EM-RF003 Page 2 of 45 Version 3.0 TABLE OF CONTENTS DOCUMENT REVISION HISTORY ......................................................................................................................... 4 GENERAL INFORMATION ....................................................................................................................................... 5 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 5 OBJECTIVE ................................................................................................................................................................... 5 TEST METHODOLOGY .................................................................................................................................................. 5 MEASUREMENT UNCERTAINTY .................................................................................................................................... 6 TEST FACILITY ............................................................................................................................................................. 6 SYSTEM TEST CONFIGURATION .......................................................................................................................... 7 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 7 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 7 EUT EXERCISE SOFTWARE .......................................................................................................................................... 7 DUTY CYCLE ................................................................................................................................................................ 8 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 8 EXTERNAL I/O CABLE .................................................................................................................................................. 8 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 8 SUMMARY OF TEST RESULTS ............................................................................................................................... 9 TEST EQUIPMENT LIST ......................................................................................................................................... 10 FCC§15.247 (I), §1.1307 (B) (1) & §2.1093 - RF EXPOSURE ..................................................................................... 11 APPLICABLE STANDARD ............................................................................................................................................ 11 MEASUREMENT RESULT ............................................................................................................................................ 11 FCC §15.203 - ANTENNA REQUIREMENT ........................................................................................................... 12 APPLICABLE STANDARD ............................................................................................................................................ 12 ANTENNA CONNECTOR CONSTRUCTION .................................................................................................................... 12 FCC §15.209, §15.205 & §15.247(D) – UNWANTED EMISSION FREQUENCIES AND RESTRICTED BANDS13 APPLICABLE STANDARD ............................................................................................................................................ 13 EUT SETUP ............................................................................................................................................…

Text truncated - open the document above for the full version.

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2401V38257E-RF Page 1 of 3 EXHIBIT D - TEST SETUP PHOTOGRAPHS Radiated Emissions View (Below 30MHz) Radiated Emissions View (Below 1 GHz) Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2401V38257E-RF Page 2 of 3 Radiated Emissions View (1-18 GHz) Radiated Emissions View (18-25 GHz) Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2401V38257E-RF Page 3 of 3 Close-up View of Radiated Emissions View (18-25 GHz)