2AB9W-3F1JW3D Printer

Ver.1 March 2015 P 1 da Vinci Jr.1.0 da Vinci Jr.1.0w User Manual da Vinci Jr.1.0 da Vinci Junior 1.0w 3D Printer Ver.1 March 2015 P 2 da Vinci Jr.1.0 The purpose of this user manual is to help users understand and use the da Vinci Junior 1.0w 3D printer correctly. It contains the operating instructions, maintenance information and application skills of the da Vinci Junior 1.0w 3D print- er. To learn more about the latest news of the da Vinci Junior 1.0w 3D printer, please contact local dealers or visit the offi cial website of XYZprinting: http://www.xyzprinting.com Trademarks All trademarks and registered trademarks are the property of their respective owners. Print History New editions of this manual incorporate new and changed material different from previous editions. Minor corrections and updates may be incorporated into reprints of the current edition without releasing additional announcements or documentation regarding the updated version. The User Manual is for user reference only. If you need to obtain the latest information, you are welcomed to visit the XYZprinting website: www.xyzprinting.com Before using this printer, please first remove the fi xed materials from the printing module and printing bed. Switching on the printer's power without removing these fixed materials may damage the machine. Registration via XYZware before your fi rst print is strongly recommended. When registered with XYZprinting, you will receive latest technical supports and updates. To register, simply click "Register Now" to begin. You may use XYZware to initiate manual updates to the printer fi rmware and software. When using the printer for the fi rst time, we recommend connecting to the Internet and performing manual update once to obtain the latest resources. The optimal room temperature for printing is 15-32 ◦ C (60- 90 ◦ F). Printing quality may be affected if room temperature is higher or lower. If you need more detailed technical support and program resources, visit the website: http://support.xyzprinting.com/ global_en/Support Before operating the printer, insert the SD card in the SD card port to make sure that the printing program is able to run properly. Before you start printing, please affi x the bed tape on the print bed. The bed tape may be removed after printing is complete. (Bed tape can be reused.) Before launching XYZscan/XYZware, connect the PC to with printer using the USB cable. For a better user experience, it is strongly advised to follow the proper procedure for using the product. Important Notice Please peruse the product instruction manual before using this product. 2 3 4 5 5 1 6 7 8 8 3 Ver.1 March 2015 P 3 da Vinci Jr.1.0 A A: Filament movement area B: Feed module C: Print head D: Filament E: Print bed F: SD card port (Storage format: FAT32) G: Control and display panel H: Front cover B C D E F G H • Do not place the printer in humid or dusty environment such as bathrooms and high traffi c areas. • Do not place the printer on a rickety surface and/or inclined position. Printer may fall down/or tumble and it may cause serious injury. • Please keep the front door closed during printing to avoid injury. • Do not touch the interior of the printer while printing. As it may be hot and include moving parts. ． Cleaning Brush Product Overview Accessory Checklist Important Safety Instruction for Use of Maintenance Tools Important Safety Instruction ． Scraper ． USB Wire ． Power Cord ． Bundled fi lament ． Bed Tape X 3pcs ． Filament spool axle ring ． Power Adapter ． Guide tube ． Cleaning Wire x 5 ． SD Card • The maintenance tools provided should be only handled by an adult. Please keep the tools away from children. • The scraper is used to remove the object from the print bed when printing has fi nished and the print bed is cool.The bed tape is reusable and it can be replaced when it worn. • Store the gear cleaning brush properly. This tool shall only be used to clean the specifi ed parts of the machine and should not be used for the cleaning of other parts to prevent damaging the machine. USB Port Power Switch Power Connector F Ver.1 March 2015 P 4 da Vinci Jr.1.0 Open the box and remove the accessories and cushions. Remove the securing styrofoam next to the print bed. Remove the plastic bag and the tapes. Remove the securing cardboard of the printing head and then remove the entire cardboard. You may push the print nozzle towards the back out of the cardboard and bend the securing cardboard downwards for an easy removal. Raise the paper cardboard slightly upwards so that the paper cardboard is detached from the styrofoam slot at the bottom. Insert the SD card that came with the printer into your computer or download the latest XYZware from the offi cial Website and install it on the computer. Use the USB cable to connect the printer to PC. Connect the power cord to the printer then turn on the power switch. hUSBblhi Unpacking the Product 1 2 34 5 67 Note: please use the original power adapter and power cord along with the printer in order to prevent product damage or personal hazards caused by differences in voltage specifi cations. Ver.1 March 2015 P 5 da Vinci Jr.1.0 Note: Please follow these steps and ensure that the guide tube is properly installed before starting the "LOAD FILAMENT" function. Failure to install the guide tube may disrupt fi lament feed. Reminder: If you are not too sure where the feed module tube port is, you may open the casing of the machine to see the indication label. Ensure that the guide tube has been tightly inserted into the port to complete the guide tube installation process. Take out the guide tube and plug in one end of the tube into the fi lament feed port on the printing module. To ensure that the guide tube is well inserted into the fi lament feed port, you may gently press on the springs around the feed port to make the insertion an easier process. Direct the guide tube from the tube movement area out of the machine and then insert the other e…

Text truncated - open the document above for the full version.

Author Rules. criteri a Subpa Equip Model Brand Applic Addre Stan d Repo r The t e was ( accre d techni sampl e rized under The produ a limits Clas art B, establ pment 3D l Name da d Name XY cant XY ess 10 (R dard(s) F C A IC C C rt(s) B est data, da were) obta dited by the cal standar e and item( CER r Declaratio ct listed in f ss B of cond ished by the D Printer a Vinci Jun YZprinting YZprinting 0F., No.99, R.O.C.) CC Part 15 ANSI C63.4- CES-003 Iss ISPR 22: 2 AN/CSA-C TL-FCCE- 1 ata evaluati ained utilizi e Authority rd(s). The te (s) tested. RTIFIC on of Confo follows was ducted and e FCC, USA nior 1.0w g g, Inc. Sec. 5, Na 5, Subpart B -2009 sue 5: 2012 008 ISPR 22-1 0 1-1501185 ion, and eq ng the tes of TAF acc est data co A B1, No. 37 Nei-Hu Dis TE FA CATEO rmity accor s (were) test radiated em A. njing E. R d B: 2013 2 0 quipment co st procedur cording to t ontained in Andy C Authorized BTL I 7, Lane 365 strict, Taipe EL:+886-2- AX:+886-2- OF CO rding to 47 ted in the B missions of d., Songsha onfiguration res, test in the ISO-17 the refere n Chiu Signatory INC. 5, Yang-Gu ei City 114, 2657-3299 -2657-3331 OMPL CFR, Part BTL EMC La the Techni an Dist., Ta contained nstruments, 025 qualit y nced test re uang St., , Taiwan. 9 1 LIANC 2 and Par aboratory to cal Standar aipei City 1 in our tes t test sites y assessme eport relate CE rt 15 of the o comply wit rds FCC Pa 0571, Taiw t report(s) a that has ent standard only to the FCC th the art 15, wan above been d and e EUT

Project No.: 1501185 Page 2 of 41 Project No.: 1501185 Page 3 of 41 Project No.: 1501185 Page 38 of 41 Project No.: 1501185 Page 39 of 41 Project No.: 1501185 Page 40 of 41 Project No.: 1501185 Page 41 of 41

3URGXFWRI7KDLODQG ;<=SULQWLQJ,QF 6HULDO1R ⹶噆⹶⏞ ᳇䲭◉教䦉榒⃕∮䢏ᆴ佟ᶻ㗇攎‪⊶ 80mm 78mm Product Name( 䔉(m)⏴䨘 / Ẏ(m)⏴䧗 ) 3D Printer Model No.( ❲噆❲⏞ ) da Vinci Junior 1.0w DC INPUT ( 䛛㴨弟⅌䛛㴨彺⅌ ) : 12.0V 5.0AContains FCC ID : YOPGS2100MIEFCC ID : 2AB9W-3F1JW 201-150050 R Contains ŏŐŕņŔĻġĩŖŏōņŔŔġŐŕʼnņœŘŊŔņġŔőņńŊŇŊņŅĪIJįġńŐōŐœĻIJńĭŖŔņġŘłŕņœġŅŊŔŔŐōŗŊŏňġŊŏŌĭġġŊŏŌġńŐŏŕłŊŏŔġʼnņłŗŚġŎņŕłō ġŊŔġőœŐʼnŊŃŊŕņŅĭġ ġġġłŏŚġŔŊōŊńŐŏņġŐœġŔŊōŐřłŏņġńŐŏŕłŎŊŏłŕŊŐŏġŘŊōġŏŐŕġŃņġłōōŐŘņŅijįġŎłŕņœŊłōĻőņŕĭġŏŐŏĮōłŎŊŏłŕŊŏňĭġłŅʼnņŔŊŗņĭġŏŐġœŐŖŏŅġłŏňōņĴįġŏŐŏĮʼnŊňʼnĮœŊŔŌġŎłŕņœŊłōĻńŐŎőōŊłŏńņġŕŐġʼnŔŇġĩʼnłśłœŅŐŖŔġŔŖŃŔŕłŏń ņŔġŇœņņĪį ĵįġőōņłŔņġŇņņŅġœŐōō HG23F1J0039 This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.空埿͑怺昦昪捊垚͑殺殯͑渗͑洊砒筂柦͑儆垫昷決͑沎汒

Project No.: 1501185 Page 4 of 41 Project No.: 1501185 Page 5 of 41 Project No.: 1501185 Page 6 of 41 Project No.: 1501185 Page 7 of 41 Project No.: 1501185 Page 8 of 41 Project No.: 1501185 Page 9 of 41 Project No.: 1501185 Page 10 of 41 Project No.: 1501185 Page 11 of 41 Project No.: 1501185 Page 12 of 41 Project No.: 1501185 Page 13 of 41 Project No.: 1501185 Page 14 of 41 Project No.: 1501185 Page 15 of 41 Project No.: 1501185 Page 16 of 41 NFC Module Project No.: 1501185 Page 17 of 41 NFC Module Project No.: 1501185 Page 18 of 41 NFC Antenna Project No.: 1501185 Page 19 of 41 Project No.: 1501185 Page 20 of 41 Project No.: 1501185 Page 21 of 41 Project No.: 1501185 Page 22 of 41 Project No.: 1501185 Page 23 of 41 Project No.: 1501185 Page 24 of 41 Project No.: 1501185 Page 25 of 41 Project No.: 1501185 Page 26 of 41 Project No.: 1501185 Page 27 of 41 Project No.: 1501185 Page 28 of 41 Project No.: 1501185 Page 29 of 41 da Vinci Junior 1.0w(mainboard) Project No.: 1501185 Page 30 of 41 da Vinci Junior 1.0w(Wifi Moudle) Project No.: 1501185 Page 31 of 41 Project No.: 1501185 Page 32 of 41 Project No.: 1501185 Page 33 of 41 Wifi Antenna Project No.: 1501185 Page 34 of 41 Wifi Antenna Location

Report No.: BTL-FCCP-1-1501185 Page 1 of 34 Radio Test Report FCC ID: 2AB9W-3F1JW This report concerns (check one) : Original Grant Class II Change Project No. : 1501185 Equipment : 3D Printer Model Name : da Vinci Junior 1.0w Applicant : XYZprinting, Inc. Address : 10F., No.99, Sec. 5, Nanjing E. Rd., Songshan Dist., Taipei City 10571, Taiwan (R.O.C.) Date of Receipt : Feb. 05, 2015 Date of Test : Feb. 05, 2015~Feb. 25, 2015 Issued Date : Feb. 26, 2015 Tested by : BTL Inc. Testing Engineer : (Josh Lin) Technical Manager : (Jeff Yang) Authorized Signatory : (Andy Chiu) BTL INC. B1, No. 37, Lane 365, Yang-guang St., Nei-hu District, Taipei City 114, Taiwan. TEL:+886-2-2657-3299 FAX: +886-2- 2657-3331 Report No.: BTL-FCCP-1-1501185 Page 2 of 34 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of R.O.C., or National Institute of Standards and Technology (NIST) of U.S.A. BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. BTL’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and BTL-self, extracts from the test report shall not be reproduced except in full with BTL’s authorized written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Report No.: BTL-FCCP-1-1501185 Page 3 of 34 Table of Contents REPORT ISSUED HISTORY 5 1 CERTIFICATION 6 2 SUMMARY OF TEST RESULTS 7 2.1 TEST FACILITY 8 2.2 MEASUREMENT UNCERTAINTY 8 3 GENERAL INFORMATION 9 3.1 GENERAL DESCRIPTION OF EUT 9 3.2 DESCRIPTION OF TEST MODES 10 3.3 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 11 3.4 DESCRIPTION OF SUPPORT UNITS 11 4 CONDUCTED EMISSION 12 4.1 LIMITS 12 4.2 TEST PROCEDURES 12 4.3 TEST SETUP LAYOUT 13 4.4 DEVIATION FROM TEST STANDARD 13 4.5 EUT OPERATING CONDITIONS 13 4.6 EUT TEST CONDITIONS 13 4.7 TEST RESULTS 13 5 RADIATED EMISSION 14 5.1 LIMITS 14 5.2 TEST PROCEDURE 15 5.3 DEVIATION FROM TEST STANDARD 16 5.4 TEST SETUP 16 5.5 EUT OPERATING CONDITIONS 16 5.6 EUT TEST CONDITIONS 17 5.7 TEST RESULTS (BELOW 30MHZ) - FCC PART 15.209 17 5.8 TEST RESULTS - (30-1000MHZ) - FCC PART 15.209 17 5.9 TEST RESULTS- FCC PART 15.225 17 6 FREQUENCY STABILITY 18 6.1 LIMITS 18 6.2 TEST PROCEDURE 18 6.3 DEVIATION FROM TEST STANDARD 18 6.4 EUT OPERATING CONDITIONS 18 6.5 EUT TEST CONDITIONS 18 6.6 TEST RESULTS 18 7 . MEASUREMENT INSTRUMENTS LIST 19 8 EUT TEST PHOTO 20 ATTACHMENT A - CONDUCTED EMISSION 23 Report No.: BTL-FCCP-1-1501185 Page 4 of 34 Table of Contents ATTACHMENT B - RADIATED EMISSION (9KHZ-30MHZ) 26 ATTACHMENT C - RADIATED EMISSION (30MHZ TO 1000MHZ) 28 ATTACHMENT D - RADIATED EMISSION (FCC PART 15.225) 31 ATTACHMENT E - FREQUENCY STABILITY MEASUREMENT 33 Report No.: BTL-FCCP-1-1501185 Page 5 of 34 REPORT ISSUED HISTORY Issue No. Description Issued Date BTL-FCCP-1-1501185 Original Issue. Feb. 26, 2015 Report No.: BTL-FCCP-1-1501185 Page 6 of 34 1 CERTIFICATION Equipment : 3D Printer Brand Name : XYZprinting Model Name : da Vinci Junior 1.0w Applicant : XYZprinting, Inc. Manufacturer : Cal-Comp Electronics (Thailand) Public Company Limited Address : 138, Moo 4, Phechkasem Road, Sapang, Koawyoi, Petchaburi 76140, Thailand. Factory : Cal-Comp Electronics (Thailand) Public Company Limited Address : 138, Moo 4, Phechkasem Road, Sapang, Koawyoi, Petchaburi 76140, Thailand. Date of Test : Feb. 05, 2015~Feb. 25, 2015 Test Sample : ENGINEERING SAMPLE Standards : FCC Part 15, Subpart C: 2013 ANSI C63.4-2009 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc.. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. BTL-FCCP-1-1501185) were obtained utilizi ng the test procedures, test instruments, test sites that has been accredited by the Authority of TAF according to the ISO-17025 quality assessment standard and technical standard(s). Report No.: BTL-FCCP-1-1501185 Page 7 of 34 2 SUMMARY OF TEST RESULTS Test procedures according to the technical standards: Standard Section Test Item Result 15.207 Conducted emission PASS 15.35 / 15.205 / 15.209 / 15.225 Radiated emission PASS 15.225(e) Frequency Stability PASS 15.203 Antenna Requirement PASS NOTE: 1. N/A: denotes test is not applicable in this Test Report Report No.: BTL-FCCP-1-1501185 Page 8 of 34 2.1 TEST FACILITY The test facilities used to collect the test data in this report: Conducted emission Test: C02: (VCCI RN: C-3477; FCC RN: 614388; FCC DN: TW1054) 1F., No. 61, Ln. 77, Sing-ai Rd., Neihu Dist., Taipei City 114, Taiwan (R.O.C.) Radiated emission Test: CB08: (FCC RN: 614388; FCC DN: TW1054; IC Assigned Code: 4428C-1) 1F., No. 61, Ln. 77, Sing-ai Rd., Neihu Dist., Taipei City 114, Taiwan (R.O.C.) 2.2 MEASUREMENT UNCERTAINTY The measurement uncertainty is not specified by FCC/Industry Canada rules and for reference only. The reported uncertainty of measurement y ± U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95%. The measure…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-1-1501185 Page 20 of 34 8 EUT TEST PHOTO Conducted emission test photos Report No.: BTL-FCCP-1-1501185 Page 21 of 34 Radiated emission test photos 9KHz to 30MHz Report No.: BTL-FCCP-1-1501185 Page 22 of 34 Radiated emission test photos 30MHz to 1000MHz