2ABM5-BTS510Bluetooth Speaker

Safety Warnings - Read all the instructions carefully before using the unit and keep them for future reference. - Retain the manual. If you pass the unit onto a third party make sure to include this manual. - The product complies with the requirement of the 1999/5/EC directive. Damage - Please inspect the unit for damage after unpacking. - Do not continue to operate the unit if you are in any doubt about it working normally, or if it is damaged in any way - switch off, withdraw the mains plug and consult your dealer. Location of Unit - The unit must be placed on a flat stable surface and should not be subjected to vibrations. - Do not place the unit on sloped or unstable surfaces as the unit may fall off or tip over. - The mains socket must be located near the unit and should be easily accessible. Temperature - Avoid extreme degrees of temperature, either hot or cold. Place the unit well away from heat sources such as radiators or gas/electric fires. - Avoid exposure to direct sunlight and other sources of heat. Naked Flames - Never place any type of candle or naked flame on the top of or near the unit. Moisture - To reduce the risk of fire, electric shock or product damage, do not expose this unit to rain, moisture, dripping or splashing. No objects filled with liquids, such as vases, should be placed on the unit. - If you spill any liquid into the unit, it can cause serious damages. Switch it off at the mains immediately. Withdraw the mains plug and consult your dealer. Ventilation - To prevent the risk of electric shock or fire hazard due to overheating, ensure that curtains and other materials do not obstruct the ventilation vents. - A minimum distance of 5cm around the unit should be maintained to allow for sufficient ventilation. - Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure the unit is well ventilated. Safety - Always disconnect the unit from the mains supply before connecting/ disconnecting other devices or moving the unit. - Unplug the unit from the mains socket before a lightning storm. - In the interests of safety and to avoid unnecessary energy consumption, never leave the unit switched on while unattended for long periods of time, e.g. overnight, while on holiday or while out of the house. Switch it off and disconnect the mains plug from the mains socket. Interference - Do not place the unit on or near appliances which may cause electromagnetic interference. If you do, it may adversely affect the operating performance of the unit, and cause a distorted picture or sound. Batteries CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. - Batteries used in the remote control for this unit are easily swallowed by young children and this is dangerous. - Keep loose batteries away from young children and make sure that the battery holder tray is secure in the remote control. Seek medical advice if you believe a cell has been swallowed. - Please dispose of batteries correctly by following the guidance in this manual. - Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Supervision - Children should be supervised to ensure that they do not play with the unit. - Never let anyone especially children push anything into the holes, slots or any other openings in the case - this could result in a fatal electric shock. Service - To reduce the risk of electric shock, do not remove screws. The unit does not contain any user-serviceable parts. Please leave all maintenance work to qualified personnel. - Do not open any fixed covers as this may expose dangerous voltages. Maintenance - Ensure the unit is fully unplugged from the power supply before cleaning. - Do not use any type of abrasive pad or abrasive cleaning solutions as these may damage the unit’s surface. - Do not use liquids to clean the unit. Pack Contents Make sure all of the following contents are included. - Main Unit - Audio Cable - USB Cable - Instruction Manual Product Overview 1. Speakers 2. - VOL + - To increase or decrease the volume 3. - Press to play/pause in Bluetooth mode - Press 3s to enter the Bluetooth pairing or disconnect the Bluetooth function 4. LED Indicator 5. - Turn on/off the speaker 6. USB Port - Power supply socket 7. MP3-LINK Socket - Connect an audio device INSTRUCTION MANUAL Bluetooth Speaker Connect Power Caution: Risk of product damage! Make sure that the power supply voltage corresponds to the voltage printed on the back of the speaker. Connect the USB cable to the power supply socket on the side of the speaker and the USB port in the computer. - The LED indicator change from light to dark cycle will illuminate red when in charging the battery. Built-in battery The speaker can also operate on built-in rechargeable battery. - The LED indicator light up will illuminate red, fast flashing when the battery is at low level. To recharge the built-in battery: Connect the speaker to the computer. Note: - Use only the supplied USB cable to charge the battery. Switch ON/OFF Long press the button on the side of the speaker to switch the speaker on or off. The LED indicator light up or off will illuminate red. Play Play from a bluetooth device You can listen to a bluetooth device through this speaker. Note: The operational range is approximately 10 meters. 1. Activate the Bluetooth function in your Bluetooth device (see the device user manual). 2. The speaker will switch to Bluetooth function automatically. 3. Long pressing the button for 3 seconds to enter the Bluetooth pairing. - The LED indicator blink will illuminate blue for searching pairing device. 4. Select "TEUFEL BAMSTER XS" on your device for pairing. - For elder devices, you need to input "0000" as pairing password. - The LED indicator light will illuminate blue when connection successful. 5. Start music play on your Bluetooth device, you can use this unit to control th…

Text truncated - open the document above for the full version.

Zhong Shan City LI TAI Electronic Industrial Co., Ltd No.3 Industrial District, Wuguishan Town, Zhongshan, Guangdong, China FCC Confidentiality Request Letter Number:CF303 Version:V05 Date: 21-05-2012 (Permanent or also called long term confidentiality is the normal method to keep certain docuements confidential, and may apply to schematics, block diagrams, operational description and bill of materials.) To: PHOENIX TESTLAB GmbH 7F., No. 12, Ln. 321, Yangguang St., Neihu Dist., Taipei City 114, Taiwan Pursuant to 47 CFR Section 0.459(a) & (b), we, (the applicant / grantee) Company name Zhong Shan City LI TAI Electronic Industrial Co., Ltd AddressNo.3 Industrial District, Wuguishan Town CityZhongshan CountryChina request for this certification filing under: Grantee CodeProduct Number FCC ID:2ABM5-BTS510 to maintainpermanent confidentialityfor the following documents submitted within this application: (please cross what is applicable, or add other documents, provide the file name and description) ExhibitFile NameDescription Operational Description BTS510-Operational Descriptionexplaining the functioning of the block diagram Block DiagramsBTS510-Block Diagramsshowing the systematic building blocks of the EUT Schematics Diagrams BTS510-Schematics Diagramsshowing components, their values and interconnection Above materials crossed contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. We understand that pursuant to 47 CFR section 0.457(d)(1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant. The documents indicated as confidential above, are not publicly available elsewhere. Attestation: City and Country:Date:Name: (this must be a person) Function:Signature: (or official company stamp) Zhongshan,Guangdong, China 2015.6.3Yuki CaiSafety approbation engineer

Zhong Shan City LI TAI Electronic Industrial Co., Ltd No.3 Industrial District, Wuguishan Town, Zhongshan, Guangdong, China Power of Attorney Number:CF101 Version:V03 Date: 01-08-2011 We, (the approval holder) Company name Zhong Shan City LI TAI Electronic Industrial Co., Ltd AddresssNo.3 Industrial District, Wuguishan Town CityZhongshan CountryChina decl are that the following representative (agent): Name (person)Jackie.deng FunctionGeneral Manager Companyname Asia Institute Technology(Dongguan) Limited Address No . 22, JinQianLing Street 3, JiTiGang Village HuangJiang Town, DongGuan, GuangDong, China . Cit yDongGuan, GuangDong CountryChina is hereby authorized to apply and sign the following equipment for certification, registration or filing on our behalf: Product DescriptionBluetooth Speake r Type or Model(s)BTS510 Tradename or Brand(s) neon FCC ID2ABM5-BTS510 Attestation: City and Country:Date:Name: (this must be a person) Function:Signature: (or official company stamp) Zhongshan,Guangdong, China 2015.6.3Yuki CaiSafety approbation engineer

Report No.: E-F1505004 Page 1 of 2 Rev: 00 Asia Institute Technology(Dongguan) Limited No. 22, JinQianLing Street 3, JiTiGang Village HuangJiang Town, DongGuan, GuangDong, China. External View of EUT Model: BTS510 Photo 1 Model: BTS510 Photo 2 Report No.: E-F1505004 Page 2 of 2 Rev: 00 Asia Institute Technology(Dongguan) Limited No. 22, JinQianLing Street 3, JiTiGang Village HuangJiang Town, DongGuan, GuangDong, China. Model: BTS510 Photo 3

FCC ID:2ABM5-BTS510 Model:BTS510 Bluetooth Speaker DC POWER:DC5V 2A MAX This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2 1 彩箱标贴（条码贴纸） 48.5x25.4mm 白底黑字for Amazon XXXXXXXXX 条码贴纸 25x6mm 白底黑字for Amazon 1X1PC 1X1PC D41015007 内容由市场部提供，生产制造部打印！ 由计划提供制造部打印！ S/N:408000001 to up S/N:412000001 Manufactured December 2014 S/N:412000001 Manufactured December 2014 LABEL 2015-7-7 廖绮萍 造型设计师 审 核 电子/安规工程师 审 核 美 工 审 核 客 户 牌 子 客 户 型 号 资料部 审 核 编 制 软件工程师 审 核 项目经理 审 核 开发品管部 审 核 外 经 审 核 批 准 备注:AMAZON() BTS510 客户确认资料！ 0.2V PO. NO.: xxxxxxxx BTS510

Report No.: E-F1505004 Page 1 of 68 Rev: 00 Asia Institute Technology(Dongguan) Limited No. 22, JinQianLing Street 3, JiTiGang Village, HuangJiang Town, DongGuan, GuangDong, China. FCC Test Report Part 15 subpart C Client Information: Applicant : Zhong Shan City LI TAI Electronic Industrial Co., Ltd Applicant add.: No.3 Industrial District, Wuguishan Town, Zhongshan, Guangdong, China EUT Information: EUT Name: Bluetooth Speaker Model No. : BTS510 Brand Name : neon FCC ID: 2ABM5-BTS510 Prepared By: Asia Institute Technology(Dongguan) Limited Add. : No. 22, JinQianLing Street 3, JiTiGang Village HuangJiang Town, DongGuan, GuangDong, China. Date of Receipt: May. 13, 2015 Date of Test: July 03~July 25, 2015 Date of Issue: July 28, 2015 Te s t R e s u l t : Pass Test procedure used: ANSI C63.4-2003 This device described above has been tested by Asia Institute Technology(Dongguan) Limited, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. The results of the testing report relate only to the sample tested. *This test report must not be used by the client to claim product endorsement by any agency of the U.S. government. Reviewed by: Approved by: Seal.Chen Jackie.Deng Report No.: E-F1505004 Page 2 of 68 Rev: 00 Asia Institute Technology(Dongguan) Limited No. 22, JinQianLing Street 3, JiTiGang Village, HuangJiang Town, DongGuan, GuangDong, China. 1 Contents Page COVER PAGE 1 CONTENTS ............................................................................................................................................................. 2 2 TEST SUMMARY .................................................................................................................................................... 4 2.1 COMPLIANCE WITH FCC PART 15 SUBPART C ...................................................................................................... 4 2.2 MEASUREMENT UNCERTAINTY ............................................................................................................................. 5 3 TEST FACILITY ...................................................................................................................................................... 6 3.1 DEVIATION FROM STANDARD ................................................................................................................................ 6 3.2 ABNORMALITIES FROM STANDARD CONDITIONS ..................................................................................................... 6 4 GENERAL INFORMATION .................................................................................................................................... 7 4.1 GENERAL DESCRIPTION OF EUT .......................................................................................................................... 7 4.2 DESCRIPTION OF TEST CONDITIONS ..................................................................................................................... 9 4.3 EUT PERIPHERAL LIST ...................................................................................................................................... 10 4.4 TEST PERIPHERAL LIST ..................................................................................................................................... 10 5 EQUIPMENTS LIST FOR ALL TEST ITEMS ....................................................................................................... 11 6 TEST RESULT ...................................................................................................................................................... 12 6.1 ANTENNA REQUIREMENT ................................................................................................................................... 12 6.1.1 Standard requirement .............................................................................................................................. 12 6.1.2 EUT Antenna ........................................................................................................................................... 12 6.2 CONDUCTION EMISSIONS MEASUREMENT ........................................................................................................... 13 6.2.1 Applied procedures / Limit ....................................................................................................................... 13 6.2.2 Test procedure ........................................................................................................................................ 13 6.2.3 Test setup ................................................................................................................................................ 13 6.2.4 Test results .............................................................................................................................................. 14 6.3 RADIATED EMISSIONS MEASUREMENT ................................................................................................................ 16 6.3.1 Applied procedures / Limit ....................................................................................................................... 16 6.3.2 Test setup ................................................................................................................................................ 16 6.3.3 Test procedure ........................................................................................................................................ 18 6.3.4 Test Result .............................................................................................................................................. 19 6.3.5 TEST RESULTS (Restricted Bands Requirements) ............................................................................... 27 6.4 BANDWIDTH TEST ...........................................…

Text truncated - open the document above for the full version.

Report No.: E-F1505004 Page 1 of 2 Rev: 00 Asia Institute Technology(Dongguan) Limited No. 22, JinQianLing Street 3, JiTiGang Village HuangJiang Town, DongGuan, GuangDong, China. Test Setup Photograph Conducted Measurement Photos Radiated Measurement Photos 30MHz-1GHz Report No.: E-F1505004 Page 2 of 2 Rev: 00 Asia Institute Technology(Dongguan) Limited No. 22, JinQianLing Street 3, JiTiGang Village HuangJiang Town, DongGuan, GuangDong, China. Above 1G