2ABM5-MCB1536CD MICRO SYSTEM

MCB1536 Instruction Manual SPEAKER SYSTEM CD MICRO SYSTEM N E -1 Some Dos And Don't On The Safe Use Of Equipment This equipment has been designed and manufactured to meet international safety standards but, like any electrical equip- ment, care must be taken if you are to obtain the best results and safety is to be assured. *********************************** DO read the operating instructions before you attempt to use the equipment. DO ensure that all electrical connections (including the mains plug, extension leads and interconnections between the pieces of equipment) are properly made and in accordance with the manufacturer’s instructions. Switch off and withdraw the mains plug before making or changing connections. DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment. DO be careful with glass panels or doors on equipment. DO route the mains lead so that it is not likely to be walked on, crushed, chafed, or subjected to excessive wear and tear or heat. *********************************** DON’T remove any fixed cover as this may expose dangerous voltages. DON’T obstruct the ventilation openings of the equipment with items such as newspaper, tablecloths, curtains, etc. Over- heating will cause damage and shorten the life of the equipment. DON’T allow electrical equipment to be exposed to dripping or splashing, or objects filled with liquids, such as vases, to be placed on the equipment. DON’T place hot object or naked flame sources such as lighted candles or nightlights on, or close to equipment. High tem- peratures can melt plastic and lead to fires. DON’T use makeshift stands and NEVER fix legs with wood screws. To ensure complete safety always fit the manufacturer’s approved stand or legs with the fixings provided according to the instructions. DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety. It is illegal to watch television whilst driving. DON’T adjust the volume of the headphones to be too high and use that for an extended period, it can damage hearing. DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a stand-by mode. Switch off using the switch on the equipment and make sure that your family know how to do this. Special arrangements may need to be made for infirm or handicapped people. DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way- switch off, withdraw the mains plug and consult your dealer. ABOVE ALL, - NEVERlet anyone especially children push anything into holes, slots or any other opening in the case - this could result in a fatal electrical shock; - NEVER guess or take chances with electrical equipment of any kind. It is better to be safe than sorry! *********************************** FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. NE-2 - Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment . Safety Warnings -Read all the instructions carefully before using the unit and keep them for future reference. - Retain the manual. If you pass the unit onto a third party make sure to include this manual. - Check that the voltage marked on the rating label matches your mains voltage. Damage - Please inspect the unit for damage after unpacking. - Do not continue to operate the unit if you are in any doubt about it working normally, or if it is damaged in any way - switch off, withdraw the mains plug and consult your dealer. Location of Unit - The unit must be placed on a flat stable surface and should not be subjected to vibrations. - Do not place the unit on sloped or unstable surfaces as the unit may fall off or tip over. - The mains socket must be located near the unit and should be easily accessible. Temperature - Avoid extreme degrees of temperature, either hot or cold. Place the unit well away from heat sources such as radiators or gas/electric fires. - Avoid exposure to direct sunlight and other sources of heat. Naked Flames - Never place any type of candle or naked flame on the top of or near the unit. Moisture - To reduce the risk of fire, electric shock or product damage, do not expose this unit to rain, moisture, dripping or splashing. No objects filled with liquids, such as vases, should be placed on the unit. - If you spill any liquid into the unit, it can cause serious damages. Switch it off at the mains immediately. Withdraw the mains plug and consult your dealer. Ventilation - To prevent the risk of electric shock …

Text truncated - open the document above for the full version.

Zhong Shan City LI TAI Electronic Industrial Co., Ltd No.3 Industrial District, Wuguishan Town, Zhongshan, Guangdong, China FCC Confidentiality Request Letter Number: CF303 Version: V05 Date: 21-05-2012 (Permanent or also called long term confidentiality is the normal method to keep certain docuements confidential, and may apply to schematics, block diagrams, operational description and bill of materials.) To: PHOENIX TESTLAB GmbH 7F., No. 12, Ln. 321, Yangguang St., Neihu Dist., Taipei City 114, Taiwan Pursuant to 47 CFR Section 0.459(a) & (b), we, (the applicant / grantee) Company name Zhong Shan City LI TAI Electronic Industrial Co., Ltd Address No.3 Industrial District, Wuguishan Town City Zhongshan Country China request for this certification filing under: Grantee Code Product Number FCC ID: 2ABM5-MCB1536 to maintain permanent confidentiality for the following documents submitted within this application: (please cross what is applicable, or add other documents, provide the file name and description) Exhibit File Name Description Operational Description Operational Description explaining the functioning of the block diagram Block Diagrams Block Diagrams showing the systematic building blocks of the EUT Schematics Diagrams Schematics Diagrams showing components, their values and interconnection Above materials crossed contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2) and 0.459. Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. We understand that pursuant to 47 CFR section 0.457(d)(1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant. The documents indicated as confidential above, are not publicly available elsewhere. Attestation: City and Country: Date: Name: (this must be a person) Function:Signature: (or official company stamp) Zhongshan,China 2015.11.12 Yuki Cai Safety approbation engineer

Zhong Shan City LI TAI Electronic Industrial Co., Ltd No.3 Industrial District, Wuguishan Town, Zhongshan, Guangdong, China Power of Attorney Number: CF101 Version: V03 Date: 01-08-2011 We, (the approval holder) Company name Zhong Shan City LI TAI Electronic Industrial Co., Ltd Addresss No.3 Industrial District, Wuguishan Town City Zhongshan Country China declare that the following representative (agent): Name (person) Richard.Li Function Program Manager Company name UL-CCIC Company Limited Address Electronic Buidling, Parage Electronic Industrial Park, No. 8 Nanyun Er Road, Guangzhou Science Park, Guangzhou 510663, China City DongGuan Country China is hereby authorized to apply and sign the following equipment for certification, registration or filing on our behalf: Product Description CD MICRO SYSTEM Type or Model(s) MCB1536 Tradename or Brand(s) neon FCC ID 2ABM5-MCB1536 Attestation: City and Country: Date: Name: (this must be a person) Function: Signature: (or official company stamp) Zhongshan,China 2015.11.12 Yuki Cai Safety approbation engineer

Issued Date: 2015-11-16 APPENDIX-Photographs of EUT Constructional Details Photo 1 Photo 2 Issued Date: 2015-11-16 Photo 3 Photo 4 Issued Date: 2015-11-16 Photo 5 Photo 6 Issued Date: 2015-11-16 Photo 7

silver plating,Translucent Display port America Customer brand Customer Type prepared by version: page:1 of Remark: Host Stickers Host Stickers White on Black White on Black White on Black Printed by the plan and manufacturing print Manufacturing Print US special sticker Warning Sticker Speaker Black Wood Color box labels (barcode sticker) Black and white Content is provided by Marketing Department Ministry of manufacturing printing Printing / printing schematic Aluminum plate Feet away Black silver fine lines

Issued Date: 2015-11-16 APPENDIX-Photographs of EUT Constructional Details Photo 1 Photo 2 Issued Date: 2015-11-16 Photo 3 Photo 4 Issued Date: 2015-11-16 Photo 5 Photo 6 Issued Date: 2015-11-16 Photo 7 Photo 8 Issued Date: 2015-11-16 Photo 9 Photo 10 Issued Date: 2015-11-16 Photo 11 Photo 12 Issued Date: 2015-11-16 Photo 13 Photo 14 Issued Date: 2015-11-16 Photo 15 Photo 16 Issued Date: 2015-11-16 Photo 17 Photo 18 ANT Issued Date: 2015-11-16 Photo 19 Photo 20

UL-CCIC Company Limited Page 1 of 45 Report No. 4787121798-1 Issued Date: 2015-11-16 FCC Test Report Part 15 subpart C Client Information: Applicant : Zhong Shan City LI TAI Electronic industrial Co., Ltd Applicant add. : No.3 Industrial District, Wuguishan Town, Zhongshan, GuangDong, China EUT Information: EUT Name : CD MICRO SYSTEM Model No. : MCB1536 Brand Name : neon FCC ID : 2ABM5-MCB1536 Prepared By: UL-CCIC Company Limited Add. : Electronic Building, Parage Electronic Industrial Park, No. 8 Nanyun Er Road, Guangzhou Science Park, Guangzhou, 510663 China Date of Receipt: Oct. 20, 2015 Date of Test: Oct. 20~Nov.03, 2015 Date of Issue: Nov. 16, 2015 Test Result: Pass This device described above has been tested by Dongguan Yaxu (AiT) Technology Limited, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of UL-CCIC Company Limited. Reviewed by: Approved by: UL-CCIC Company Limited Page 2 of 45 Report No. 4787121798-1 Issued Date: 2015-11-16 1 Contents Page COVER PAGE 1 CONTENTS............................................................................................................................................................. 2 2 TEST SUMMARY.................................................................................................................................................... 4 2.1 COMPLIANCE WITH FCC PART 15 SUBPART C...................................................................................................... 4 2.2 TEST LOCATION.................................................................................................................................................. 4 2.3 MEASUREMENT UNCERTAINTY............................................................................................................................ 5 3 TEST FACILITY ...................................................................................................................................................... 6 3.1 DEVIATION FROM STANDARD...............................................................................................................................6 3.2 ABNORMALITIES FROM STANDARD CONDITIONS.................................................................................................... 6 4 GENERAL INFORMATION .................................................................................................................................... 7 4.1 GENERAL DESCRIPTION OF EUT ......................................................................................................................... 7 4.2 DESCRIPTION OF TEST CONDITIONS..................................................................................................................... 9 4.3 TEST PERIPHERAL LIST..................................................................................................................................... 10 4.4 EUT PERIPHERAL LIST..................................................................................................................................... 10 5 EQUIPMENTS LIST FOR ALL TEST ITEMS ....................................................................................................... 11 6 TEST RESULT ...................................................................................................................................................... 12 6.1 ANTENNA REQUIREMENT.................................................................................................................................. 12 6.1.1 Standard requirement............................................................................................................................. 12 6.1.2 EUT Antenna.......................................................................................................................................... 12 6.2 CONDUCTION EMISSIONS MEASUREMENT.......................................................................................................... 13 6.2.1 Applied procedures / Limit...................................................................................................................... 13 6.2.2 Test procedure ....................................................................................................................................... 13 6.2.3 Test setup............................................................................................................................................... 13 6.2.4 Test results ............................................................................................................................................. 14 6.3 RADIATED EMISSIONS MEASUREMENT............................................................................................................... 16 6.3.1 Applied procedures / Limit...................................................................................................................... 16 6.3.2 Test setup............................................................................................................................................... 16 6.3.3 Test procedure ....................................................................................................................................... 19 6.3.4 Test Result ............................................................................................................................................. 20 6.3.5 TEST RESULTS (Restricted Bands Requirements) .............................................................................. 25 6.4 BANDWIDTH TEST........................................................................................................................................ 26 6.4.1 Applied procedures / Limit...................................................................…

Text truncated - open the document above for the full version.

Issued Date: 2015-11-16 Radiated Emission Test Setup Below 1G Above 1G Issued Date: 2015-11-16 Conduction Emissions Test Setup