2ABO6-0725Tablet PC

Table of Contents Welcome! Prior to Using Your Device The Device Interface Device Content Acquiring Content Customizing Your Device Settings Finding Additional Assistance Product Information -1- Welcome! Your Device is designed to let you to read, watch videos, listen to music, play games, run apps, browse the Internet, and stay connected–all on one device. This short, informative guide will familiarize you with many Device features, and can generally be read in less than 15 minutes. Additional help is available on the Device Support website at [INCLUDE URL]. -2- Prior to using your Device Before you use your Device, do the following:  Charge the battery  Unlock your Device The following sections walk you through the above actions in addition to providing information about the Devic e interface. Charging the ba ttery To charge your Device, connect it to a power outlet using the included power adapter. The indicator light on the bottom edge of the device will turn amber while charging and green when the battery is fully charged. When your Device is on, a lightning bolt will appear on the battery indi cator at the top of the screen. If the indicator light does not turn green, make sure that the power cable is full y inserted into your Device and that the power adapter is securely inserted into the power outlet. If your Device is still not charging, try another electrical outlet. Fully charging your Device should take 4 hours. When fully charged, the battery indicator will appear filled. Unlocking your Device To unlock your Device, press the power button to wake it up and display the unlock screen, then press the orange ribbon and swipe your finger to the left across the screen. Setting up & registering your Device If you’re reading this guide, you’ve probably completed the Device setup process. This includes connecting to a Wi-Fi network and registering your Device to a Company account. If your W i-Fi is not connected, [DESCRIBE] To verify that your Device is registered and ready to use, [DESCRIBE]. To register, [DESCRIBE] -3- Basics Speakers: The top edge of your Device contains stereo speakers for audio content. Headphone jack: Plug in headphones or your own external speakers. Plugging in headphones or external speakers will turn off the built-in speakers. Micro-USB/power port: To charge your Device from a power outlet, connect it to a power outlet using the included power adapter. You can use a USB cable (not included) to connect your Device to a computer for transferring files. Power button: To turn on your Device, press the power button. To put your Device in sleep mode, press and release the power button. If you need to turn off the Device completely, such as when traveling on an airplane, press and hold the power button for seven seconds until the screen goes blank. If your Device does not power on or is unresponsive during use, you can do a hard restart by pr essing and holding the power button for 20 seconds. The power button has a charge indicator light that is amber when your Device is charging and will turn off when the battery is fully charged. Touchscreen actions Your Device features a touchscreen interface that allows you to perform many tasks with a few gestures. To select an item, simply tap it. To turn a page or advance through your content libraries, simply swipe your finger left or right. Swipe your finger up or down to navigate your content. -4- Chapter 1 The Device Interface Status Bar The Device Status Bar is located at the top of the screen and displays the Home icon, Quick Settings icon, Wi-Fi indicator, battery indicator, and the time. Home Button: Tap the Home button from anywhere on your Device to return to the Home screen. Notifications: Messages generated by games and applications. You can select a sound to alert you of incoming notifications in Settings. Quick Settings: Select to display settings for the most commonly performed tasks including, locking and unlocking your Device’s screen rotation, adjusting volume, setting display brightness, accessing Wi-Fi settings, and syncing. Tap the More to bring up more Device Settings. Wi-Fi Indicator: The number of bands represents the strength of the Wi-Fi signal at your current location. Battery Indicator: The degree to which the battery is filled represents the remaining charge in the battery. Searching The search field is located at the top the Home screen and content pages. Tap the search field to bring up the onscree n keyboard. After you enter your search criteria, tap the Search key on the keyboard. You can enter a letter in the search field, and search for content beginning with that letter. Tabs Tabs on the Home screen represent the major content types: Books, Newsstand, Docs, Music, Video, and Web. Select a tab to view all of the stored content in that category either on the device or in the cloud. For example, selecting Newsstand displays all magazines and newspapers including individual issues and subscriptions. -5- Content is displayed on “shelves” in either a grid or list view for books, newsstand, docs, and web. To scroll, drag your finger anywhere in the content item. To quick scroll, flick your finger. To sort content, tap and release the sort control menu. Sorting options differ depending upon content type. For example, you can sort your books by most recent (default), author, or title. Home Screen The Home screen contains all of the content on your device in a home screen view. To advance the home screeen, swipe your finger across the screen. Each item will appear once in the home screeen. An item’s position is determined by when it was most recently accessed. Newly purchased items are marked with a “New” badge. Favorites You can designate any item on your Device as a Favorite. Favorites are located below the home screen, and can be added in two ways:  Tap and hold to drag an item from the home screen to the Favorites section.  Tap and hold an item to display the context menu and select “Add to…

Text truncated - open the document above for the full version.

720510

Model GQY56XZ FCC ID: 2ABO6-0725 Location of this label – on the bottom back of the device

720510 720510 720510 720510 720510

Report Number : FA432436-09 Report Version : Rev. 02 Page Number : 1 of 75 FCC SAR Test Report APPLICANT : Nyle Oswind Parry Limited Liability Company EQUIPMENT : Tablet PC MODEL NAME : GQY56XZ FCC ID : 2ABO6-0725 STANDARD : FCC 47 CFR Part 2 (2.1093) ANSI/IEEE C95.1-1992 IEEE 1528-2003 We, SPORTON INTERNATIONAL INC., would like to declare that the tested sample has been evaluated in accordance with the procedures and had been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC., the test report shall not be reproduced except in full. SPORTON INTERNATIONAL INC. No. 52, Hwa Ya 1 st Rd., Hwa Ya Technology Park, Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. Approved by: Jones Tsai / Manager Reviewed by: Eric Huang / Deputy Manager Report Number : FA432436-09 Report Version : Rev. 02 Page Number : 2 of 75 Table of Contents 1. Statement of Compliance ............................................................................................................................................. 4 2. Administration Data ...................................................................................................................................................... 4 3. Guidance Standard ....................................................................................................................................................... 5 4. Equipment Under Test (EUT) ....................................................................................................................................... 5 4.1 General Information ............................................................................................................................................... 5 4.2 Maximum Tune-up Limit ......................................................................................................................................... 6 4.3 General LTE SAR Test and Reporting Considerations ........................................................................................... 8 5. Proximity Sensor Triggering Test ................................................................................................................................ 9 6. RF Exposure Limits......................................................................................................................................................16 6.1 Uncontrolled Environment .....................................................................................................................................16 6.2 Controlled Environment .........................................................................................................................................16 7. Specific Absorption Rate (SAR) ..................................................................................................................................17 7.1 Introduction ...........................................................................................................................................................17 7.2 SAR Definition .......................................................................................................................................................17 8. System Description and Setup ...................................................................................................................................18 9. Measurement Procedures ...........................................................................................................................................19 9.1 Spatial Peak SAR Evaluation ................................................................................................................................19 9.2 Power Reference Measurement............................................................................................................................20 9.3 Area Scan .............................................................................................................................................................20 9.4 Zoom Scan ............................................................................................................................................................21 9.5 Volume Scan Procedures ......................................................................................................................................21 9.6 Power Drift Monitoring ...........................................................................................................................................21 10. Test Equipment List ...................................................................................................................................................22 11. System Verification ....................................................................................................................................................23 11.1 Tissue Verification ...............................................................................................................................................23 11.2 System Performance Check Results ...................................................................................................................25 12. RF Exposure Positions ..............................................................................................................................................26 12.1 SAR Testing for Tablet .........................................................................................................................................26 13. Conducted RF Output Power (Unit: dBm) ................................................................................................................26 14. Bluetooth Exclusions Applied ...............................................................................................................................…

Text truncated - open the document above for the full version.

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2014/7/5 System Check_Body_750MHz_140705 DUT: D750V3-1004 Communication System: CW; Frequency: 750 MHz;Duty Cycle: 1:1 Medium: MSL_750_140705 Medium parameters used: f = 750 MHz; σ = 0.967 S/m; ε r = 53.993; ρ = 1000 kg/m 3 23.5 22.5 DASY5 Configuration: - Probe: EX3DV4 - SN3955; ConvF(9.89, 9.89, 9.89); Calibrated: 2013/11/12; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1399; Calibrated: 2013/11/7 - Phantom: ELI 4.0_Front; Type: QDOVA001BB; Serial: 1029 - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) Configuration/Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.84 W/kg Configuration/Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 54.254 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 3.32 W/kg SAR(1 g) = 2.29 W/kg; SAR(10 g) = 1.53 W/kg Maximum value of SAR (measured) = 2.86 W/kg 0 dB = 2.86 W/kg = 4.56 dBW/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2014/7/2 System Check_Body_835MHz_140702 DUT: D835V2-499 Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium: MSL_850_140702 Medium parameters used: f = 835 MHz; σ = 0.946 S/m; ε r = 56.664; ρ = 1000 kg/m 3 23.5 22.5 DASY5 Configuration: - Probe: EX3DV4 - SN3955; ConvF(9.81, 9.81, 9.81); Calibrated: 2013/12/23; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1399; Calibrated: 2013/11/7 - Phantom: ELI 4.0_Front; Type: QDOVA001BB; Serial: 1026 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Configuration/Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.98 W/kg Configuration/Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 57.140 V/m; Power Drift = -0.13 dB Peak SAR (extrapolated) = 3.41 W/kg SAR(1 g) = 2.37 W/kg; SAR(10 g) = 1.58 W/kg Maximum value of SAR (measured) = 2.95 W/kg 0 dB = 2.95 W/kg = 4.70 dBW/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2014/7/4 System Check_Body_835MHz_140704 DUT: D835V2-499 Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium: MSL_850_140704 Medium parameters used: f = 835 MHz; σ = 0.996 S/m; ε r = 54.843; ρ = 1000 kg/m 3 23.6 22.6 DASY5 Configuration: - Probe: EX3DV4 - SN3955; ConvF(9.81, 9.81, 9.81); Calibrated: 2013/12/23; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1399; Calibrated: 2013/11/7 - Phantom: ELI 4.0_Front; Type: QDOVA001BB; Serial: 1026 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Configuration/Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 3.03 W/kg Configuration/Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 56.312 V/m; Power Drift = -0.12 dB Peak SAR (extrapolated) = 3.43 W/kg SAR(1 g) = 2.39 W/kg; SAR(10 g) = 1.6 W/kg Maximum value of SAR (measured) = 2.98 W/kg 0 dB = 2.98 W/kg = 4.74 dBW/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2014/7/2 System Check_Body_1750MHz_140702 DUT: D1750V2-1068 Communication System: CW; Frequency: 1750 MHz;Duty Cycle: 1:1 Medium: MSL_1750_140702 Medium parameters used: f = 1750 MHz; σ = 1.546 S/m; ε r = 51.742; ρ = 1000 kg/m 3 23.3 22.3 DASY5 Configuration: - Probe: ES3DV3 - SN3270; ConvF(4.91, 4.91, 4.91); Calibrated: 2013/9/24; - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn778; Calibrated: 2013/8/21 - Phantom: ELI 4.0_Front; Type: QDOVA001BB; Serial: 1029 - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) Configuration/Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 12.8 W/kg Configuration/Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 86.489 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 15.5 W/kg SAR(1 g) = 9.05 W/kg; SAR(10 g) = 4.87 W/kg Maximum value of SAR (measured) = 11.3 W/kg 0 dB = 11.3 W/kg = 10.53 dBW/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2014/7/3 System Check_Body_1750MHz_140703 DUT: D1750V2-1068 Communication System: CW; Frequency: 1750 MHz;Duty Cycle: 1:1 Medium: MSL_1750_140703 Medium parameters used: f = 1750 MHz; σ = 1.527 S/m; ε r = 51.913; ρ = 1000 kg/m 3 23.3 22.3 DASY5 Configuration: - Probe: ES3DV3 - SN3270; ConvF(4.91, 4.91, 4.91); Calibrated: 2013/9/24; - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn778; Calibrated: 2013/8/21 - Phantom: ELI 4.0_Front; Type: QDOVA001BB; Serial: 1029 - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) Configuration/Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 10.8 W/kg Configuration/Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 80.510 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 15.5 W/kg SAR(1 g) = 9 W/kg; SAR(10 g) = 4.83 W/kg Maximum value of SAR (measured) = 11.2 W/kg 0 dB = 11.2 W/kg = 10.49 dBW/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2014/7/14 System Check_Body_1750MHz_140714 DUT: D1750V2-1068 Communication System: CW; Frequency: 1750 MHz;Duty Cycle: 1:1 Medium: MSL_1750_140714 Medium parameters used: f = 1750 MHz; σ = 1.525 S/m; ε r = 52.092; ρ = 1000 kg/m 3 23.3 22.3 DASY5 Configuration: - Probe: EX3DV4 - SN3925; ConvF(8.3, 8.3, 8.3); Calibrated: 2014/5/22; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn495; Calibrated: 2014/5/19 - Phantom: ELI 4.0_Front; Type: QDOVA001BB; Serial: 1029 - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) Config…

Text truncated - open the document above for the full version.

Report No. : FR432436-09D Report Version : Rev. 02 Page Number : 1 of 150 Report Template No.: BU5-FR15EWL Version 1.0 FCC RF Test Report APPLICANT : Nyle Oswind Parry Limited Liability Company EQUIPMENT : Tablet PC MODEL NAME : GQY56XZ FCC ID : 2ABO6-0725 STANDARD : FCC Part 15 Subpart E §15.407 CLASSIFICATION : (NII) Unlicensed National Information Infrastructure The testing completed on Aug. 22, 2014. We, SPORTON INTERNATIONAL INC., would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC., the test report shall not be reproduced except in full. Reviewed by: Joseph Lin / Supervisor Approved by: Jones Tsai / Manager SPORTON INTERNATIONAL INC. No. 52, Hwa Ya 1 st Rd., Hwa Ya Technology Park, Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. Report No. : FR432436-09D Report Version : Rev. 02 Page Number : 2 of 150 Report Template No.: BU5-FR15EWL Version 1.0 TABLE OF CONTENTS REVISION HISTORY .......................................................................................................................................... 3 SUMMARY OF TEST RESULT ......................................................................................................................... 4 1 GENERAL DESCRIPTION .......................................................................................................................... 5 1.1 Applicant ............................................................................................................................................ 5 1.2 Feature of Equipment Under Test ..................................................................................................... 5 1.3 Product Specification of Equipment Under Test ................................................................................ 6 1.4 Modification of EUT ........................................................................................................................... 6 1.5 Testing Location ................................................................................................................................ 7 1.6 Applicable Standards ......................................................................................................................... 7 2 TEST CONFIGURATION OF EQUIPMENT UNDER TEST ........................................................................ 8 2.1 Carrier Frequency and Channel ........................................................................................................ 9 2.2 Pre-Scanned RF Power ................................................................................................................... 10 2.3 Test Mode ........................................................................................................................................ 12 2.4 Connection Diagram of Test System ............................................................................................... 16 2.5 Support Unit used in test configuration and system ........................................................................ 18 2.6 EUT Operation Test Setup .............................................................................................................. 18 2.7 Measurement Results Explanation Example ................................................................................... 18 3 TEST RESULT ........................................................................................................................................... 19 3.1 26dB Bandwidth Measurement ....................................................................................................... 19 3.2 Maximum Conducted Output Power Measurement ........................................................................ 28 3.3 Power Spectral Density Measurement ............................................................................................ 35 3.4 Unwanted Emissions Measurement ................................................................................................ 43 3.5 AC Conducted Emission Measurement......................................................................................... 139 3.6 Frequency Stability Measurement ................................................................................................. 144 3.7 Automatically Discontinue Transmission ....................................................................................... 146 3.8 Antenna Requirements .................................................................................................................. 147 4 LIST OF MEASURING EQUIPMENT ...................................................................................................... 149 5 UNCERTAINTY OF EVALUATION ......................................................................................................... 150 Report No. : FR432436-09D Report Version : Rev. 02 Page Number : 3 of 150 Report Template No.: BU5-FR15EWL Version 1.0 REVISION HISTORY REPORT NO. VERSION DESCRIPTION ISSUED DATE FR432436-09D Rev. 01 Initial issue of report Aug. 02, 2014 FR432436-09D Rev. 02 1. Add FCC KDB 644545 D03 Guidance for IEEE 802.11ac v01 to section 1.6. 2. Revise NII-3 Emission Bandwidth results in section 3.1.5 for Straddle Channel. 3. Revise NII-3 power limit to 30 dBm in section 3.2.5 for Straddle Channel. 4. Revise NII-3 PSD limit to 30 dBm/500kHz in section 3.3.5 for Straddle Channel. Aug. 22, 2014 Report No. : FR432436-09D Report Version : Rev. 02 Page Number : 4 of 150 Report Template No.: BU5-FR15EWL Version 1.0 SUMMARY OF TEST RESULT Report Section FCC Rule IC Rule Description Limit Result Remark 3.1 2.1049 15.403(i) RSS-210 A9.2 26dB Bandwidth - Pass - 3.2 15.407(a) RSS-210 A9.2 Maximum Conducted Output Power ≤ 17, 24, …

Text truncated - open the document above for the full version.

Report No. : FR432436-09E Report Version : Rev. 02 Page Number : 1 of 67 Report Template No.: BU5-FR15EWL Version 1.0 FCC RF Test Report APPLICANT : Nyle Oswind Parry Limited Liability Company EQUIPMENT : Tablet PC MODEL NAME : GQY56XZ FCC ID : 2ABO6-0725 STANDARD : FCC Part 15 Subpart E §15.407 CLASSIFICATION : (NII) Unlicensed National Information Infrastructure Testing was completed on Jul. 23, 2014. We, SPORTON INTERNATIONAL INC., would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC., the test report shall not be reproduced except in full. Reviewed by: Joseph Lin / Supervisor Approved by: Jones Tsai / Manager SPORTON INTERNATIONAL INC. No. 52, Hwa Ya 1 st Rd., Hwa Ya Technology Park, Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. Report No. : FR432436-09E Report Version : Rev. 02 Page Number : 2 of 67 Report Template No.: BU5-FR15EWL Version 1.0 TABLE OF CONTENTS REVISION HISTORY .......................................................................................................................................... 3 SUMMARY OF TEST RESULT ......................................................................................................................... 4 1 GENERAL DESCRIPTION .......................................................................................................................... 5 1.1 Applicant ............................................................................................................................................ 5 1.2 Product Feature of Equipment Under Test ........................................................................................ 5 1.3 Product Specification subjective to this standard .............................................................................. 6 1.4 Modification of EUT ........................................................................................................................... 6 1.5 Testing Location ................................................................................................................................ 6 1.6 Applicable Standards ......................................................................................................................... 7 2 TEST CONFIGURATION OF EQUIPMENT UNDER TEST ........................................................................ 8 2.1 Carrier Frequency and Channel ........................................................................................................ 8 2.2 Pre-Scanned RF Power ..................................................................................................................... 9 2.3 Test Mode ........................................................................................................................................ 11 2.4 Connection Diagram of Test System ............................................................................................... 13 2.5 Support Unit used in test configuration and system ........................................................................ 15 2.6 EUT Operation Test Setup .............................................................................................................. 15 2.7 Measurement Results Explanation Example ................................................................................... 15 3 TEST RESULT ........................................................................................................................................... 16 3.1 6dB Bandwidth Measurement ......................................................................................................... 16 3.2 Maximum Conducted Output Power Measurement ........................................................................ 19 3.3 Power Spectral Density Measurement ............................................................................................ 21 3.4 Unwanted Emissions Measurement ................................................................................................ 25 3.5 AC Conducted Emission Measurement........................................................................................... 56 3.6 Frequency Stability Measurement ................................................................................................... 61 3.7 Automatically Discontinue Transmission ......................................................................................... 63 3.8 Antenna Requirements .................................................................................................................... 64 4 LIST OF MEASURING EQUIPMENT ........................................................................................................ 66 5 UNCERTAINTY OF EVALUATION ........................................................................................................... 67 Report No. : FR432436-09E Report Version : Rev. 02 Page Number : 3 of 67 Report Template No.: BU5-FR15EWL Version 1.0 REVISION HISTORY REPORT NO. VERSION DESCRIPTION ISSUED DATE FR432436-09E Rev. 01 Initial issue of report Aug. 01, 2014 FR432436-09E Rev. 02 1. Remove IC Rule at Page4. 2. Revise applicable standards FCC KDB 789033 D01 General UNII Test Procedures Old Rules v01r04 to FCC KDB 789033 D02 General UNII Test Procedures New Rules v01. 3. Revise FCC 6 dB Bandwidth Power Limit (dBm) to Min. Limit(MHz) 4. Revise section 3.2.1 and 3.2.3. 5. Revise section 3.3.1 and 3.3.3. 6. Revise section 3.4.1 and 3.4.3. Aug. 22, 2014 Report No. : FR432436-09E Report Version : Rev. 02 Page Number : 4 of 67 Report Template No.: BU5-FR15EWL Version 1.0 SUMMARY OF TEST RESULT Report Secti…

Text truncated - open the document above for the full version.