2AC8UA2018Amazfit GTS 2 mini

01 Package Contents 1 Please refer to the illustrations to disassemble or assemble the watch strap. Note: Once the strap is assembled, pull the strap properly to ensure it is installed successfully. 5 Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: — — — — The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposurecondition without restriction. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1. 2. IC: 21806-A2018 CAN ICES-3(B)/NMB-3(B) Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes : 1. 2. est susceptible d'en compromettre le fonctionnement. 05 Disassembly and Assembly of the Watch Strap 3 Smartwatch with band × 1Charging base × 1Instruction Manual × 1 02 About the Watch Power button Charging plates Heart rate sensor Note: Press and hold the power button to power on the watch. If the watch cannot be turned on, please charge it first. 06 Charging the Watch 1. 2. 3. 10 Certifications and Safety Approvals 7 Hereby, Anhui Huami Information Technology Co., Ltd. declares that the radio device type A2018 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://support.amazfit.com/en/ For more regulatory information and product certification/- compliance logos related to Amazfit GTS 2 mini, please go to Regulatory on your Amazfit GTS 2 mini. 11 Battery Safety Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas. A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. 1. 2. 3. 12 Safety Notice Do not allow children or pets to bite or swallow the product or its accessories, as this may cause injury. Do not place this product under excessively high or low temperatures, which may cause the product to catch fire or explode. Do not place this product near heat sources or open flame, such as ovens and electric heaters. Some people may experience allergic skin reactions to plastics, leathers, fibers, and other materials, and symptoms such as redness, swelling, and inflammation will occur after long-term contact with this product's components. If you experience such symptoms, please discontinue use and consult your doctor. 1. 2. 3. 4. 14 Troubleshooting 9 Please check the FAQ on the website: https://support.amazfit.com/en. Wear the watch strap not too tightly or too loosely, and leave enough space for the skin to breathe. This makes you feel comfortable and allows the sensor to function. When measuring blood oxygen saturation, wear the watch correctly. Avoid wearing the watch on the wrist joint, keep your arm flat, maintain comfortable (appropriately tight) fitting between the watch and the skin of your wrist, and keep your arm still throughout the measurement process. When aected by external factors (arm sag, arm sway, arm hair, tattoo, etc.), the measurement result may be inaccurate or the measurement may fail and provide no output. We recommend that you tighten the watch strap during exercise and loosen it afterwards. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the device. l'appareil ne doit pas produire de brouillage, et l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage 15 Warranty and Return Policy The Amazfit Limited Warranty covers Amazfit products against manufacturing defects beginning on the original purchase date. The warranty period is 12 months or another specified period as the applicable consumer laws in the consumer’s country of purchase require. Our warranty is in addition to rights provided by applicable consumer laws. Ocial website: en.amazfit.com Support: support.amazfit.com 03 Pairing the Watch 04 Charging the Watch 2 1. 2. 3. 4. Scan the QR code on the Instruction Manual with your mobile phone to download the app to your mobile phone. You can also download the latest version of App from the Google Play Store or Apple App store. Open the APP, register an account and log in. Follow the steps in the app to pair your watch correctly. Once pairing is complete, the watch will display the correct time. You can set the other watch functions as needed. Note: 1. 2. 3. For a better user experience, please use the most recent version of the app. The operating system needs to be Android 5.0, iOS 10.0, or above. Do not pair the wat…

Text truncated - open the document above for the full version.

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Anhui Huami Information Technology Co.,Ltd. Address Room 1201, Building A4, National Animation Industry Base, No. 800 Wangjiang West Road, Gaoxin District, Hefei, Anhui, China Grantee Code 2AC8U FCC ID 2AC8UA2018 Authorized Contact Name Lloyd Wong Contact Email [email protected] Contact Phone +86 15345601722 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date:2020-10-26 Print Name: Lloyd Wong Title: Senior Certification Manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Anhui Huami Information Technology Co.,Ltd. Date:2020-8-24 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AC8UA2018 To whom it may concern: We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Anhui Huami Information Technology Co.,Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Lloyd Wong Title: Senior Certification Manager Signature: On behalf of Company: Anhui Huami Information Technology Co.,Ltd. Telephone: +86 15345601722

Anhui Huami Information Technology Co.,Ltd. 2020-8-24 To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Anhui Huami Information Technology Co.,Ltd. Room 1201, Building A4, National Animation Industry Base, No. 800 Wangjiang West Road, Gaoxin District, Hefei, Anhui, China Regarding: Confidentiality Request regarding application for FCC ID: 2AC8UA2018 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Signature: Printed Name : Lloyd Wong Title: Senior Certification Manager Company Name:Anhui Huami Information Technology Co.,Ltd.

27-10-2020 Federal Communications Commission Office of Engineering and Technology Laboratory Division 445 12TH ST SW Washington DC 20554 United Stated E-Label declare for FCC ID: 2AC8UA2018 Dear Sir/Madam, We hereby declare that the E-label Comply with the following regulations 1.Access to regulatory information provided without special codes, accessories, or permissions beyond the normal security protection to unlock the screen, sign-in page, or overall product access 2.The FCC ID, warning statements, or other information displayed electronically in a manner that is clearly legible without the aid of magnification. 3.Users able to access the regulatory information without requiring special access codes or permissions, and in all cases the information must be accessible in no more than three steps from a product’s main or home menu If you have any questions regarding this application, please free to contact me. Yours Sincerely, Name: Lloyd Wong signature: On Behalf of Company:. Anhui Huami Information Technology Co.,Ltd.

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 1 of 4 Page 1 of 4 External Photos Applicant: Anhui Huami Information Technology Co.,Ltd. Address of Applicant: Room 1201, Building A4, National Animation Industry Base, No. 800 Wangjiang West Road, Gaoxin District, Hefei, Anhui, China Equipment Under Test (EUT): Product Name: Amazfit GTS 2 mini Model No.: A2018 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 2 of 4 Page 2 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 3 of 4 Page 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 4 of 4 Page 4 of 4 End 163.5mm 82mmR=2mm 018-200290 R-C-hM6-A2018 廢電池請回收 This product isn't a medical device. All data and measurements aren't intended for medical diagnosis or medical monitoring. The figure is for reference only, please be subject to the actual product. Amazfit GTS 2 mini Model Name: A2018 Bluetooth Version: BLE V5.0 Package Contents: Smartwatch with the band, Charging base, Instruction manual Manufactured by: Anhui Huami Information Technology Co., Ltd. Address: Room 1201, Building A4, National Animation Industry Base, No. 800 Wangjiang West Road, Gaoxin District, Hefei, Anhui, China Version Bluetooth : BLE V5.0 Compatible avec : Android 5.0, iOS 10.0 ou versions ultérieures Contenu de l'emballage : Montre intelligente avec bracelet, station de chargement, manuel d'utilisation Versión de Bluetooth: BLE V5.0 Compatible con: Android 5.0, iOS 10.0 o superior Contenido del paquete: Reloj inteligente con correa, base de carga y manual de instrucciones Versione Bluetooth: BLE V5.0 Compatibile con: Android 5.0, iOS 10.0 o versioni successive Contenuto della confezione: smart watch con cinturino, base di ricarica, manuale di istruzioni Versão de Bluetooth: BLE V5.0 Compatível com: Android 5.0, iOS 10.0 ou superior Conteúdo da embalagem: Smartwatch com a pulseira, base de carregamento, manual de instruções Bluetooth-Version: BLE V5.0 Kompatibel mit: Android 5.0, iOS 10.0 oder höher Lieferumfang: Smartwatch mit Band, Ladestation, Benutzerhandbuch Версия Bluetooth: BLE V5.0 Совместимость: Android 5.0, iOS 10.0 или более поздняя версия Комплектация: Смарт-часы с браслетом, зарядная база, руководство пользователя Έκδοση Bluetooth: BLE V5.0 Συμβατό με: Android 5.0, iOS 10.0 ή νεότερη έκδοση Περιεχόμενα συσκευασίας: Smartwatch με λουράκι, Βάση φόρτωσης, Εγχειρίδιο οδηγιών Wersja Bluetooth: BLE V5.0 Zgodność z systemami: Android 5.0, iOS 10.0 lub nowszymi Zawartość opakowania: Smartwatch z opaską, podstawa do ładowania, instrukcja obsługi This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC ID:2AC8UA2018 IC: 21806-A2018 © 2020 Huami. All rights reserved. Amazfit and the Amazfit logo are trademarks or registered trademarks of Huami Group. Compatible with: Android 5.0, iOS 10.0 or Above 贴纸粘贴位置及 方向示意 选择正确的 方向图标拖 动到图纸里 纹理方向 色相正确、印迹牢固、 套印准确、各色套印不露杂色， 套印误差≤ 0.1mm 模切走位≤±0.5mm 印刷-覆膜-烫银-啤-包盒 料号 料号描述 版本号 设计时间 设计师 材质工艺要求 材质要求： 制作工序： 工艺要求： 颜色及专色： 纹理要求： 比例单位 mm1:1 安徽华米信息科技有限公司 Ness_产品信息贴纸_欧美版 A10802134600000 V1.6 2020.10.20 孙建 80G艾利铜版纸，印刷过哑油

3.5mm

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 1 of 6 Page 1 of 6 Internal Photos Applicant: Anhui Huami Information Technology Co.,Ltd. Address of Applicant: Room 1201, Building A4, National Animation Industry Base, No. 800 Wangjiang West Road, Gaoxin District, Hefei, Anhui, China Equipment Under Test (EUT): Product Name: Amazfit GTS 2 mini Model No.: A2018 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 2 of 6 Page 2 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 3 of 6 Page 3 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 4 of 6 Page 4 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 5 of 6 Page 5 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 6 of 6 Page 6 of 6 End

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM200700582202 Page: 1 of 8 Parlam Zhan E&E Section Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. 1 Cover Page RF Exposure REPORT Application No.: SHEM2007005822CR FCC ID: 2AC8UA2018 IC: 21806-A2018 Applicant: Anhui Huami Information Technology Co.,Ltd. Address of Applicant: Room 1201, Building A4, National Animation Industry Base, No. 800 Wangjiang West Road, Gaoxin District, Hefei, Anhui, China Manufacturer: Anhui Huami Information Technology Co.,Ltd. Address of Manufacturer: Room 1201, Building A4, National Animation Industry Base, No. 800 Wangjiang West Road, Gaoxin District, Hefei, Anhui, China Factory: Shenzhen Zowee Smart Manufacturing Co.,Ltd. Address of Factory: No. 149, Second Industrial Road, Tangxiachong Community, Yanluo Street, Bao’an District, Shenzhen City, Guangdong Province, P.R. Equipment Under Test (EUT): EUT Name: Amazfit GTS 2 mini Model No.: A2018 Trade mark: AMAZFIT Standard(s) : FCC Rules 47 CFR §2.1093 KDB447498 D01 General RF Exposure Guidance v06 RSS-102 Issue 5 (March 2015) Date of Receipt: 2020-07-15 Date of Test: 2020-07-18 to 2020-08-04 Date of Issue: 2020-08-06 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM200700582202 Page: 2 of 8 Revision Record Version Description Date Remark 00 Original 2020-08-06 / Authorized for issue by: Bill Wu / Project Engineer Parlam Zhan / Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM200700582202 Page: 3 of 8 2 Contents Page 1 COVER PAGE................................................................................................................................................. 1 2 CONTENTS ..................................................................................................................................................... 3 3 GENERAL INFORMATION .......................................................................................................................... 4 3.1 GENERAL DESCRIPTION OF E.U.T. ......................................................................................................... 4 3.2 DETAILS OF E.U.T. .................................................................................................................................. 4 3.3 TEST LOCATION ....................................................................................................................................... 5 3.4 TEST FACILITY .......................................................................................................................................... 5 4 TEST STANDARDS AND LIMITS ............................................................................................................... 6 4.1 FCC RADIOFREQUENCY RADIATION EXPOSURE LIMITS .......................................................................... 6 4.2 IC RADIOFREQUENCY RADIATION EXPOSURE LIMITS .............................................................................. 7 5 MEASUREMENT AND CALCULATION .................................................................................................... 8 5.1 MAXIMUM TRANSMIT POWER ................................................................................................................... 8 5.2 RF EXPOSURE CALCULATION ................................................................................................................. 8 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM200700582202 Page: 4 of 8 3 General Information 3.1 General Description of E.U.T. Power supply: DC 3.85V 220mAh rechargeable battery Serial Number: E1230108 Firmware Version: 0.2.2.28 3.2 Details of E.U.T. Antenna Gain: -4.2dBi Antenna Type: PIFA Antenna Bluetooth Version: V5.0 LE Date rate: 1Mbps & 2Mbps Channel Spacing: 2MHz Modulation Type: GFSK Number of Channels: 40 Operation Frequency: 2402MHz to 2480MHz SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM200700582202 Page: 5 of 8 3.3 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch 588 West Jindu Road, Xinqiao, Songjiang, 201612 Shanghai, China. Tel: +86 21 6191 5666 Fax: +86 21 6191 5678 3.4 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • CNAS (No. CNAS L0599) CNAS has accredited SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. to ISO/IEC 17025:2017 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. • NVLAP (LAB CODE: 201034-0) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. is accredited by the National Voluntary Laboratory Accreditation Program (NVLAP). • FCC (Designation Number: CN5033) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. has been recognized as an accredited testing laboratory. Test Firm Registration Number: 479755. • ISED (CAB Identifier: CN0020) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. EMC Laboratory has been recognized by Innovation, Science and Economic Development Canada (ISED) as an accredited testing laboratory. ISED#: 8617A. • VCCI (Member No.…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Appendix A for SHEM200700582201 1.6dB Bandwidth Test Mode Test Channel EBW[MHz] Limit Verdict 1M Rate 2M Rate BLE 2402 0.68 1.13 0.5 PASS BLE 2440 0.68 1.12 0.5 PASS BLE 2480 0.67 1.13 0.5 PASS SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch 6dB Bandwidth_BLE_2402(1M Rate) 6dB Bandwidth_BLE_2440(1M Rate) 6dB Bandwidth_BLE_2480(1M Rate) SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch 6dB Bandwidth_BLE_2402(2M Rate) 6dB Bandwidth_BLE_2440(2M Rate) 6dB Bandwidth_BLE_2480(2M Rate) SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch 2.Occupied Bandwidth Test Mode Test Channel OBW[MHz] Limit[MHz] Verdict 1M Rate 2M Rate BLE 2402 1.03 2.04 --- PASS BLE 2440 1.03 2.04 --- PASS BLE 2480 1.03 2.04 --- PASS SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Occupied Bandwidth_BLE_2402(1M Rate) Occupied Bandwidth_BLE_2440(1M Rate) Occupied Bandwidth_BLE_2480(1M Rate) SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Occupied Bandwidth_BLE_2402(2M Rate) Occupied Bandwidth_BLE_2440(2M Rate) Occupied Bandwidth_BLE_2480(2M Rate) SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch 3.Maximum peak conducted output power Test Mode Test Channel Power[dBm] Limit[dBm] Verdict 1M Rate 2M Rate BLE 2402 -3.09 -3.08 30 PASS BLE 2440 -1.81 -1.79 30 PASS BLE 2480 -2.97 -2.97 30 PASS SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Maximum peak conducted output power_BLE_2402(1M Rate) Maximum peak conducted output power_BLE_2440(1M Rate) Maximum peak conducted output power_BLE_2480(1M Rate) SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Maximum peak conducted output power_BLE_2402(2M Rate) Maximum peak conducted output power_BLE_2440(2M Rate) Maximum peak conducted output power_BLE_2480(2M Rate) SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch 4.Maximum Peak power spectral density Test Mode Test Channel PSD[dBm/3kHz] Limit[dBm/3kHz] Verdict 1M Rate 2M Rate BLE 2402 -18.4 -18.81 8.00 PASS BLE 2440 -17.19 -17.67 8.00 PASS BLE 2480 -18.34 -18.83 8.00 PASS SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Maximum Peak power spectral density_BLE_2402(1M Rate) Maximum Peak power spectral density_BLE_2440(1M Rate) Maximum Peak power spectral density_BLE_2480(1M Rate) SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Maximum Peak power spectral density_BLE_2402(2M Rate) Maximum Peak power spectral density_BLE_2440(2M Rate) Maximum Peak power spectral density_BLE_2480(2M Rate) SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch 5.Band-edge for RF Conducted Emissions Test Mode Test Channel Carrier Power[dBm] Max. Spurious Level [dBm] Limit [dBm] Verdict 1M Rate 2M Rate 1M Rate 2M Rate 1M Rate 2M Rate BLE 2402 -3.11 -3.12 -43.20 -36.11 -23.11 -23.12 PASS BLE 2480 -3.08 -3.06 -48.80 -48.81 -23.08 -23.06 PASS SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Band-edge for RF Conducted Emissions_BLE_2402(1M Rate) Band-edge for RF Conducted Emissions_BLE_2480(1M Rate) SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Band-edge for RF Conducted Emissions_BLE_2402(2M Rate) Band-edge for RF Conducted Emissions_BLE_2480(2M Rate) SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch 6.RF Conducted Spurious Emissions Test Mode Test Channel StartFre [MHz] StopFre [MHz] RBW [kHz] VBW [kHz] Pref[dBm] Max. Level [dBm] Limit [dBm] Verdict 1M Rate 2M Rate 1M Rate 2M Rate 1M Rate 2M Rate BLE 2402 30 10000 100 300 -3.13 -3.14 -53.92 -54.05 <- 23.13 <- 23.14 PASS BLE 2402 10000 26000 100 300 -3.133 -3.142 - 44.689 - 43.469 <- 23.133 <- 23.142 PASS BLE 2440 30 10000 100 300 -1.86 -1.86 -53.60 -54.02 <- 21.86 <- 21.86 PASS BLE 2440 10000 26000 100 300 -1.855 -1.864 - 42.382 - 43.147 <- 21.855 <- 21.864 PASS BLE 2480 30 10000 100 300 -3.23 -3.05 -53.82 -53.57 <- 23.23 <- 23.05 PASS BLE 2480 10000 26000 100 300 -3.232 -3.047 - 43.770 - 43.013 <- 23.232 <- 23.047 PASS SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch RF Conducted Spurious Emissions_BLE_2402(1M Rate) SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch RF Conducted Spurious Emissions_BLE_2440(1M Rate) SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch RF Conducted Spurious Emissions_BLE_2480(1M Rate) SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch RF Conducted Spurious Emissions_BLE_2402(2M Rate) SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch RF Conducted Spurious Emissions_BLE_2440(2M Rate) SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch RF Conducted Spurious Emissions_BLE_2480(2M Rate) SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM200700582201 Page: 1 of 43 Parlam Zhan E&E Section Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. TEST REPORT Application No.: SHEM2007005822CR FCC ID: 2AC8UA2018 IC: 21806-A2018 Applicant: Anhui Huami Information Technology Co.,Ltd. Address of Applicant: Room 1201, Building A4, National Animation Industry Base, No. 800 Wangjiang West Road, Gaoxin District, Hefei, Anhui, China Manufacturer: Anhui Huami Information Technology Co.,Ltd. Address of Manufacturer: Room 1201, Building A4, National Animation Industry Base, No. 800 Wangjiang West Road, Gaoxin District, Hefei, Anhui, China Factory: Shenzhen Zowee Smart Manufacturing Co.,Ltd. Address of Factory: No. 149, Second Industrial Road, Tangxiachong Community, Yanluo Street, Bao’an District, Shenzhen City, Guangdong Province, P.R. Equipment Under Test (EUT): EUT Name: Amazfit GTS 2 mini Model No.: A2018 Trade mark: AMAZFIT Standard(s) : 47 CFR Part 15, Subpart C 15.247 RSS-247 Issue 2, February 2017 RSS-Gen Issue 5, March 2019 Amendment 1 Date of Receipt: 2020-07-15 Date of Test: 2020-07-18 to 2020-08-04 Date of Issue: 2020-08-06 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards …

Text truncated - open the document above for the full version.