2AC8UA2025Amazfit X

04 App installation 4 02 About the watch 2 Charging port BioTracker TM sensor Band removal button Force Sensing Button 05 Pairing 5 Only use the original charger to charge your watch. The charging plates on the back of the watch should be aligned with those of the charger. Once the watch begins to charge, the charging indicator will appear on the screen. 03 Charging the Watch 3 01 Package contents 1 Additional small wristbandWatch with large wristband User Manual Charging base Note: Only use the original charging base provided in the product package to charge your watch. Also make sure that the charging base is always kept dry. Use your mobile phone to scan the QR code below or search for "Amazfit" App in the Google Play store or Apple App Store, then download and install the App. Note: Do not pair the watch directly using your mobile phone’s Bluetooth settings. Note: 1. 2. For a better user experience, please use the most recent version of the Amazfit App. The operation system requires Android 5.0, iOS 10.0 or above. 06 Attaching/Detaching the watch strap 6 1. 2. 3. Open the App on your phone register or login with your account. Select the device to pair in the device list, then complete the pairing as prompted. Once the pairing is done, the watch will display the correct time. You can set the other watch functions as needed. 1. 2. 3. 4. Note: After the strap is attached, please pull on the strap using appropriate force to ensure a secure attachment. 1. 2. Adjust the position of the strap mount to suit your wrist. To attach or detach the watch strap, refer to the illustration below. 8 Note: This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferences in a residential installation. This device generates, uses, and may radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the device o and on, the user is encouraged to try to correct the interference by one or more of the following measures: 9 - Reorient or relocate the receiving antenna. - Increase the separation between the device and receiver. - Connect the device into an outlet on a circuit dierent from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. 07 Regulatory Notice 7 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. 2. FCC ID: 2AC8UA2025 Any changes or modifications that are not expressly approved by the party responsible for the compliance may void the user’s authority to operate the device. This device may not cause harmful interference, and This device must accept any interference received, including the interference that may cause undesired operation. 08 Disposal and Recycling Information09 Certifications and Safety Approvals 10 This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation if the device. IC: 21806-A2025 CAN ICES-3(B)/NMB-3(B) Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. 11 Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and the maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce the potential of radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotopically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. 1213 10 Safety Notice 14 Hereby, Anhui Huami Information Technology Co., Ltd. declares that the radio device type A2025 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://en.amazfit.com/support.html For more regulatory information and product certification/compliance logos related to Amazfit X, please go to Regulatory on your Amazfit X. The following symbol signifies that this device has to be disposed separately from ordinary household wastes at the end of its life. Please kindly be aware that this is your responsibility to dispose the electronic device at recycling centers so as to help conserve the natural resources. 11 Basic specifications 15 Model: A2025 Battery capacity: 205 mAh Input: 5V 500mA MAX Wireless connection: Bluetooth 5.0 BLE Frequency: 2402-2480 MHz Max.output: 0 dBm Operation temperature: 0 to 45°C Waterproofing: 5ATM System requirements: …

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 1 of 4 Page 1 of 4 External Photos Applicant: Anhui Huami Information Technology Co.,Ltd. Address of Applicant: Room 1201, Building A4, National Animation Industry Base, No. 800 Wangjiang West Road, Gaoxin District, Hefei, Anhui, China Equipment Under Test (EUT): Product Name: Amazfit X Model No.: A2025 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 2 of 4 Page 2 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 3 of 4 Page 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 4 of 4 Page 4 of 4 End GPS Antenna

Amazfit X Model: A2025 Battery: 205 mAh Input: 5V 500mA MAX Wireless connection: Bluetooth 5.0 BLE System requirements: Android 5.0 or iOS 10.0 or above Manufacturer: Anhui Huami Information Technology Co., Ltd. Address: Room 1201, Building A4, National Animation Industry Base, No. 800 Wangjiang West Road, Gaoxin District, Hefei, China The product contains a rechargeable lithium battery. Battery safety reminder: Do not disassemble, impact, crush, or throw it into fire. If the battery swells, stop using the product. Do not place the product in high-temperature environments. Do not use the battery after it is immersed in water. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: ( 1 )This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation. FCC ID: 2AC8UA2025 IC: 21806-A2025 CAN ICES-3(B)/NMB-3(B) © 2019 Huami. All rights reserved. Amazfit and the Amazfit logo are trademarks or registered trademarks of Huami lnc. Bluetooth is a trademark of Bluetooth SIG lnc. iOS is a trademark of Apple lnc. Android is a trademark of Google lnc. XXXXXXXXXXXXXX 廢電池請回收 018-200149 Amazfit XColor: Black 6972596101079 Production Date: 06/2020 Made in China Quality Certified SN: 2025BCDD999999

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 1 of 8 Page 1 of 8 Internal Photos Applicant: Anhui Huami Information Technology Co.,Ltd. Address of Applicant: Room 1201, Building A4, National Animation Industry Base, No. 800 Wangjiang West Road, Gaoxin District, Hefei, Anhui, China Equipment Under Test (EUT): Product Name: Amazfit X Model No.: A2025 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 2 of 8 Page 2 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 3 of 8 Page 3 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 4 of 8 Page 4 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 5 of 8 Page 5 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 6 of 8 Page 6 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 7 of 8 Page 7 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 8 of 8 Page 8 of 8 End

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM191201977302 Page: 1 of 8 Parlam Zhan E&E Section Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. 1 Cover Page RF Exposure REPORT Application No.: SHEM1912019773CR FCC ID: 2AC8UA2025 IC: 21806-A2025 Applicant: Anhui Huami Information Technology Co.,Ltd. Address of Applicant: Room 1201, Building A4, National Animation Industry Base, No. 800 Wangjiang West Road, Gaoxin District, Hefei, Anhui, China Manufacturer: Anhui Huami Information Technology Co.,Ltd. Address of Manufacturer: Room 1201, Building A4, National Animation Industry Base, No. 800 Wangjiang West Road, Gaoxin District, Hefei, Anhui, China Factory: Hi-P (Suzhou) Electronics & Technology Co., Ltd. Address of Factory: No. 86, Liufeng Road, Wuzhong District, Suzhou, Jiangsu Province, P.R.China. Equipment Under Test (EUT): EUT Name: Amazfit X Model No.: A2025 Standard(s) : FCC Rules 47 CFR §2.1093 KDB447498 D01 General RF Exposure Guidance v06 RSS-102 Issue 5 (March 2015) Date of Receipt: 2019-12-17 Date of Test: 2020-04-25 to 2020-05-14 Date of Issue: 2020-05-16 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM191201977302 Page: 2 of 8 Revision Record Version Description Date Remark 00 Original 2020-05-16 / Authorized for issue by: Bill Wu / Project Engineer Parlam Zhan / Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM191201977302 Page: 3 of 8 2 Contents Page 1 COVER PAGE................................................................................................................................................. 1 2 CONTENTS ..................................................................................................................................................... 3 3 GENERAL INFORMATION .......................................................................................................................... 4 3.1 GENERAL DESCRIPTION OF E.U.T. ......................................................................................................... 4 3.2 DETAILS OF E.U.T. .................................................................................................................................. 4 3.3 TEST LOCATION ....................................................................................................................................... 5 3.4 TEST FACILITY .......................................................................................................................................... 5 4 TEST STANDARDS AND LIMITS ............................................................................................................... 6 4.1 FCC RADIOFREQUENCY RADIATION EXPOSURE LIMITS .......................................................................... 6 4.2 IC RADIOFREQUENCY RADIATION EXPOSURE LIMITS .............................................................................. 7 5 MEASUREMENT AND CALCULATION .................................................................................................... 8 5.1 MAXIMUM TRANSMIT POWER ................................................................................................................... 8 5.2 RF EXPOSURE CALCULATION ................................................................................................................. 8 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM191201977302 Page: 4 of 8 3 General Information 3.1 General Description of E.U.T. Power supply: DC 3.85V 205mAh rechargeable battery. Serial Number: 20252006000089 Firmware Version: V0.1.0.44 Cable: DC Cable 60cm 3.2 Details of E.U.T. Antenna Gain: -3.3dBi Antenna Type: Integral Antenna Bluetooth Version: BT5.0 BLE Channel Spacing: 2MHz Modulation Type: GFSK Data Rate: 1Mbps Number of Channels: 40 Operation Frequency: 2402MHz to 2480MHz SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM191201977302 Page: 5 of 8 3.3 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch 588 West Jindu Road, Xinqiao, Songjiang, 201612 Shanghai, China. Tel: +86 21 6191 5666 Fax: +86 21 6191 5678 3.4 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • CNAS (No. CNAS L0599) CNAS has accredited SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. to ISO/IEC 17025:2017 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. • NVLAP (LAB CODE: 201034-0) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. is accredited by the National Voluntary Laboratory Accreditation Program (NVLAP). • FCC (Designation Number: CN5033) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. has been recognized as an accredited testing laboratory. • ISED (CAB Identifier: CN0020) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. EMC Laboratory has been recognized by Innovation, Science and Economic Development Canada (ISED) as an accredited testing laboratory. • VCCI (Member No.: 3061) The 3m Semi-anechoic chamber and Shielded Room of SGS-CSTC Standards Technical Services (Shang…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM191201977301 Page: 1 of 53 Parlam Zhan E&E Section Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. TEST REPORT Application No.: SHEM1912019773CR FCC ID: 2AC8UA2025 IC: 21806-A2025 Applicant: Anhui Huami Information Technology Co.,Ltd. Address of Applicant: Room 1201, Building A4, National Animation Industry Base, No. 800 Wangjiang West Road, Gaoxin District, Hefei, Anhui, China Manufacturer: Anhui Huami Information Technology Co.,Ltd. Address of Manufacturer: Room 1201, Building A4, National Animation Industry Base, No. 800 Wangjiang West Road, Gaoxin District, Hefei, Anhui, China Factory: Hi-P (Suzhou) Electronics & Technology Co., Ltd. Address of Factory: No. 86, Liufeng Road, Wuzhong District, Suzhou, Jiangsu Province, P.R.China. Equipment Under Test (EUT): EUT Name: Amazfit X Model No.: A2025 Standard(s ) : 47 CFR Part 15, Subpart C 15.247 RSS-247 Issue 2, February 2017 RSS-Gen Issue 5, March 2019 Amendment 1 Date of Receipt: 2019-12-17 Date of Test: 2020-04-25 to 2020-05-14 Date of Issue: 2020-05-16 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM191201977301 Page: 2 of 53 Revision Record Version Description Date Remark 00 Original 2020-05-16 / Authorized for issue by: Bill Wu / Project Engineer Parlam Zhan / Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM191201977301 Page: 3 of 53 2 Test Summary Radio Spectrum Technical Requirement Item FCC Requirement IC Requirement Method Result Antenna Requirement 47 CFR Part 15, Subpart C 15.203 & 15.247(c) RSS-Gen Clause 6.8 N/A Customer Declaration N/A: Not applicable Radio Spectrum Matter Part Item FCC Requirement IC Requirement Method Result Minimum 6dB Bandwidth 47 CFR Part 15, Subpart C 15.247a(2) RSS-247 Clause 5.2(a) ANSI C63.10 (2013) Section 11.8.1 Pass Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247(b)(3) RSS-247 Clause 5.4(d) ANSI C63.10 (2013) Section 11.9.1 Pass Power Spectrum Density 47 CFR Part 15, Subpart C 15.247(e) RSS-247 Clause 5.2(b) ANSI C63.10 (2013) Section 11.10.2 Pass Conducted Band Edges Measurement 47 CFR Part 15, Subpart C 15.247(d) RSS-247 Clause 5.5 ANSI C63.10 (2013) Section 11.13.3.2 Pass Conducted Spurious Emissions 47 CFR Part 15, Subpart C 15.247(d) RSS-247 Clause 5.5 ANSI C63.10 (2013) Section 11.11 Pass Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.209 & 15.247(d) RSS-247 Section 3.3 & RSS-Gen Section 8.9 ANSI C63.10 (2013) Section 6.10.5 Pass Radiated Spurious Emissions 47 CFR Part 15, Subpart C 15.209 & 15.247(d) RSS-247 Section 3.3 & RSS-Gen Section 8.9 ANSI C63.10 (2013) Section 6.4,6.5,6.6 Pass 99% Bandwidth - RSS-Gen Section 6.7 ANSI C63.10 Section 6.9.3 Pass Frequency Stability - RSS-Gen Section 8. 11 RSS-Gen Section 6.11 Note1 Note 1: Frequency stability requested in RSS GEN S8.11 has been complied since the result of band edge can demonstrate. 2: The product can’t work with BT function when it’s charging. SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM191201977301 Page: 4 of 53 3 Contents Page 1 COVER PAGE ........................................................................................................................................ 1 2 TEST SUMMARY .................................................................................................................................. 3 3 CONTENTS ........................................................................................................................................... 4 4 GENERAL INFORMATION .................................................................................................................... 5 4.1 DETAILS OF E.U.T. .......................................................................................................................... 5 4.2 DESCRIPTION OF SUPPORT UNITS ..................................................................................................... 5 4.3 POWER LEVEL SETTING USING IN TEST................................................................................................ 5 4.4 MEASUREMENT UNCERTAINTY........................................................................................................... 5 4.5 TEST LOCATION ............................................................................................................................... 7 4.6 TEST FACILITY ................................................................................................................................. 7 4.7 DEVIATION FROM STANDARDS ........................................................................................................... 7 4.8 ABNORMALITIES FROM STANDARD CONDITIONS................................................................................... 7 5 EQUIPMENT LIST ................................................................................................................................. 8 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................... 9 6.1 ANTENNA REQUIREMENT .................................................................................................................. 9 7 RADIO SPECTRUM MATTER TEST RESULTS ..................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 1 of 5 Page 1 of 5 Test Setup Photos-FCC Applicant: Anhui Huami Information Technology Co.,Ltd. Address of Applicant: Room 1201, Building A4, National Animation Industry Base, No. 800 Wangjiang West Road, Gaoxin District, Hefei, Anhui, China Equipment Under Test (EUT): Product Name: Amazfit X Model No.: A2025 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 2 of 5 Page 2 of 5 1 Contents Page 1 CONTENTS .......................................................................................................... 2 2 EQUIPMENT UNDER TEST PICTURES ......................................................... 3 2.1 Radiated Emission Test Setup ...................................................................... 3 2.2 RF Conducted Test Setup ............................................................................. 5 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 3 of 5 Page 3 of 5 2 EQUIPMENT UNDER TEST PICTURES 2.1 Radiated Emission Test Setup 30MHz to 1GHz SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 4 of 5 Page 4 of 5 Above 1GHz Zoom: SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 5 of 5 Page 5 of 5 2.2 RF Conducted Test Setup End