2AC8UA2142Smart Watch

94 mm 46 mm Product Manual .1 Manual del producto .10 Manuel du produit .16 Bedienungsanleitung .22 Manuale del prodotto .29 Manual do produto .35 Warranty and Return Policy The Amazfit Limited Warranty covers Amazfit products against manufacturing defects beginning on the original purchase date. The warranty period is 12 months or another specified period as the applicable consumer laws in the consumer’s country of purchase require. Our warranty is in addition to rights provided by applicable consumer laws. Official website: en.amazfit.com Support: support.amazfit.com/en Please check the FAQ on the website: https://support.amazfit.com/en. Note: 5 Disposal and Recycling Information All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points. 6 Certifications and Safety Approvals Hereby, Anhui Huami Information Technology Co., Ltd. declares that the radio device type A2142 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://support.amazfit.com/en/ Hereby, Anhui Huami Information Technology Co., Ltd. declares that the radio device type A2142 is in compliance with Radio Equipment Regulations 2017 (S.I. 2017/1206). The full text of the UK declaration of conformity is available at the following internet address: http://en.amazfit.com/support.html 7 Regulatory Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: 2AC8UA2142 Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 8 —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This equipment has been tested and meets applicable limits for radio frequency (RF) exposure. SAR limits depend on whether this equipment is used against the head or on the wrist. The FCC SAR limit for extremity SA R is 4.0W/kg (10g) and head SAR is 1.6W/kg (1g). The highest SAR value reported under this this standard dur ing product certification when properly Limb worn (0mm) on the extremity SAR is 0.05W/kg, and close to m outh (10mm) SAR is 0.13 W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. T he device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposurecondition without restriction. T his device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-ex empt RSS(s). Operationis subject tothe following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en comprome re le fonctionnement. IC: 21806- A2142CAN ICES-003 (B)/NMB-003(B) 1 This product isn't a medical device. None of the data or measurements are intended for medical diagnosis or medical monitoring. Please use the dedicated charging cable that comes with the product. To prevent charging abnormality or damage to the charging cable, make sure that the charging base is dry before charging. For more information about safety precautions, repair, and maintenance, please refer to the electronic manual. 12 34 Zepp App Poppins / Regular—6 PT Poppins / Light—4.5 PT 英 Pairing the Watch 1. 2. 3. Use your mobile phone to scan the QR code on the right side to download and install the app, or search for the app in the Google Play Store or Apple App Store and then download and install the the latest version of the app. Open the app, register an account and log in. Pair the watch as prompted by the app. Zepp is a must-have app for this watch. It provides scienti…

Text truncated - open the document above for the full version.

FRN: 0033461849

Tune up

Compliance Certification Services (Kunshan) Inc. Page: 1 of 6 Appendix D for KSCR210900000604 Photographs 1. SAR measurement System 2. Photographs of Tissue Simulate Liquid 3. Photographs of EUT test position 4. EUT Antenna Locations 5. EUT Constructional Details Compliance Certification Services (Kunshan) Inc. Page: 2 of 6 1. SAR measurement System Compliance Certification Services (Kunshan) Inc. Page: 3 of 6 2. Photographs of Tissue Simulate Liquid Tissue Simulate Liquid for Head 2450 Compliance Certification Services (Kunshan) Inc. Page: 4 of 6 3. Photographs of EUT test position Photo 1: Front side 10mm Photo 2: Back side 0mm Compliance Certification Services (Kunshan) Inc. Page: 5 of 6 4. EUT Antenna Locations Compliance Certification Services (Kunshan) Inc. Page: 6 of 6 5. EUT Constructional Details Details please Refer to the <External Photos> & <Internal Photos>.

Compliance Certification Services (Kunshan) Inc. Page: 1 of 5 External Photos Applicant: Anhui Huami Information Technology Co., Ltd. Address of Applicant: 7/F, Building B2, Huami Global Innovation Center, No. 900, Wangjiang West Road, High-tech Zone, Hefei City, China (Anhui) Pilot Free Trade Zone (230088) Equipment Under Test (EUT): Product Name: Smart Watch Model No.: A2142 Compliance Certification Services (Kunshan) Inc. Page: 2 of 5 Compliance Certification Services (Kunshan) Inc. Page: 3 of 5 Compliance Certification Services (Kunshan) Inc. Page: 4 of 5 Compliance Certification Services (Kunshan) Inc. Page: 5 of 5 End 切刀线 压痕线 开槽线 半穿刀 糊盒位 背部粘 备胶区 选择正确的 方向图标拖 动到图纸里 纹理方向 色相正确、印迹牢固、 套印准确、各色套印不露杂色， 套印误差≤ 0.1mm 模切走位≤±0.5mm 料号 料号描述 版本号 设计时间 设计师 材质工艺要求 材质要求： 制作工序： 印刷-覆膜-UV-啤-糊盒 工艺要求： 颜色及专色： 纹理要求： 比例单位 mm1:1 安徽华米信息科技有限公司 杨娟 Andes_封套盒_美洲版_极地黑 A10801075700000 V1.2 2022.12.05 20 380.5 266.7 71.1 110.5 111.9 0.45 15 70.6 70.6 70.6 2.5 69.75 23.25 29.7 59.97 2 41.17 15 70.6 25.73 25.74 20.7720.77 111.9 + 300g GT 300g 158 119,7 69.3 110 300g 39 15 1.5 22.5 69.75 BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE BRAVE YOUR ADVENTURE A10801075700000-VX.X XXXX 3D立体激凸 Model Name: A2142 Input: 5 V DC 550 mA Bluetooth Version: V5.0 Compatible with: Android 7.0, iOS 12.0 or above Package Contents: Smart watch with strap, Charging base, Instruction manual This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: 2AC8UA2142 IC: 21806-A2142 Manufactured by: Anhui Huami Information Technology Co., Ltd. Address: 7/F, Building B2, Huami Global Innovation Center, No. 900, Wangjiang West Road, High-tech Zone, Hefei City, China (Anhui) Pilot Free Trade Zone This product isn't a medical device. None of the data or measurements are intended for medical diagnosis or medical monitoring. The figures are for references only, and the actual product may differ. Entrée : 5 V c.c. 550 mA Version Bluetooth : V5.0 Compatible avec : Android 7.0, iOS 12.0 ou versions ultérieures Contenu de l'emballage : Montre intelligente avec bracelet, station de chargement, manuel d'utilisation Cet appareil est conforme à la partie 15 des règles FCC. Son fonctionnement est soumis aux deux conditions suivantes : (1) Cet appareil ne doit pas provoquer d'interférences nuisibles (2) Cet appareil doit accepter toutes les interférences reçues, y compris les interférences susceptibles de provoquer un fonctionnement indésirable. FCC ID: 2AC8UA2142 IC: 21806-A2142 Fabriqué par : Anhui Huami Information Technology Co., Ltd. Address : 7/F, Building B2, Huami Global Innovation Center, No. 900, Wangjiang West Road, High-tech Zone, Hefei City, China (Anhui) Pilot Free Trade Zone Ce produit n'est pas un appareil médical. Toutes les données et mesures ne sont pas destinées à un diagnostic médical ou à une surveillance médicale. Le chiffre est pour référence seulement, veuillez être soumis au produit réel. Versión de Bluetooth: V5.0 Compatible con: Android 7.0, iOS 12.0 o superior Contenido del paquete: Reloj inteligente con correa, base de carga y manual de instrucciones Versione Bluetooth: V5.0 Compatibile con: Android 7.0, iOS 12.0 o versioni successive Contenuto della confezione: smart watch con cinturino, base di ricarica, manuale di istruzioni Bluetooth-Version: V5.0 Kompatibel mit: Android 7.0, iOS 12.0 oder höher Lieferumfang: Smartwatch mit Band, Ladestation, Benutzerhandbuch Versão de Bluetooth: V5.0 Compatível com: Android 7.0, iOS 12.0 ou superior Conteúdo da embalagem: Smartwatch com a pulseira, base de carregamento, manual de instruções © 2021 Zepp Health. All rights reserved. Amazfit and the Amazfit logo are trademarks or registered trademarks of Zepp Health Group. Zepp Health Group includes Zepp Health Corporation and its affiliates. © 2021 Zepp Health. Tous les droits sont réservés. Amazfit et le logo Amazfit sont des marques commerciales ou des marques déposées de Zepp Health Group. Le groupe Zepp Health comprend la société Zepp Health et ses filiales. T-Rex Ultra AMAZFIT T-REX ULTRA The Amazfit T-Rex Ultra is for b…

Text truncated - open the document above for the full version.

Compliance Certification Services (Kunshan) Inc. Page: 1 of 6 Internal Photos Applicant: Anhui Huami Information Technology Co., Ltd. Address of Applicant: 7/F, Building B2, Huami Global Innovation Center, No. 900, Wangjiang West Road, High-tech Zone, Hefei City, China (Anhui) Pilot Free Trade Zone (230088) Equipment Under Test (EUT): Product Name: Smart Watch Model No.: A2142 Compliance Certification Services (Kunshan) Inc. Page: 2 of 6 Compliance Certification Services (Kunshan) Inc. Page: 3 of 6 Compliance Certification Services (Kunshan) Inc. Page: 4 of 6 Compliance Certification Services (Kunshan) Inc. Page: 5 of 6 Compliance Certification Services (Kunshan) Inc. Page: 6 of 6 End

Compliance Certification Services (Kunshan) Inc. Appendix C Calibration certificate 1.Dipole D2450V2 - SN 817(2019/06/10) 2. DAE DAE4-SN 1 245(2021/05/19) 3. Probe EX3DV4-SN 3 798(2021/05/31) Report No.: KSKSCR210900000604CR210900000604 KSCR210900000604 Dipole D2450V2 SN 817 Head Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2019/06/10 -28.5 / 52.3 / 2020/06/09 -29.3 2.81% 54.3 2.0Ω 2021/06/08 -29.2 2.46% 54 1.7Ω Body Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2019/06/10 -26.6 / 48.7 / 2020/06/09 -27.5 3.38% 49.6 0.9Ω 2021/06/08 -27.3 2.63% 49.5 0.8Ω

Compliance Certification Services (Kunshan) Inc. Report No.: KSCR210900000604 Page: 1 of 52 Eric Lin Laboratory Manager SAR TEST REPORT Application No.: KSCR2109000006AT Applicant: Anhui Huami Information Technology Co., Ltd. Address of Applicant: 7/F, Building B2, Huami Global Innovation Center, No. 900, Wangjiang West Road, High-tech Zone, Hefei City, China (Anhui) Pilot Free Trade Zone (230088) Manufacturer: Anhui Huami Information Technology Co., Ltd. Address of Manufacturer: 7/F, Building B2, Huami Global Innovation Center, No. 900, Wangjiang West Road, High-tech Zone, Hefei City, China (Anhui) Pilot Free Trade Zone (230088) Factory: Hi-P (Suzhou) Electronics & Technology Co., Ltd. Address of Factory: No. 86, Liufeng Road, Hedong Industrial Park, Guoxiang street agency, Wuzhong District, Suzhou, Jiangsu Provice, P.R. China Product Name: Smart Watch Model No.(EUT): A2142 Trade mark: AMAZFIT FCC ID: 2AC8UA2142 Standard(s) : FCC 47CFR §2.1093 Date of Receipt: 2021-10-23 Date of Test: 2021-11-03 to 2021-11-03 Date of Issue: 2022-12-01 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Report No.: KSCR210900000604 Page: 2 of 52 REVISION HISTORY Revision Record Version Description Date Remark 00 Original 2022-12-01 / Authorized for issue by: Richard.Kong/ Project Engineer Eric.Lin/Reviewer Compliance Certification Services (Kunshan) Inc. Report No.: KSCR210900000604 Page: 3 of 52 TEST SUMMARY Frequency Band Maximum Reported SAR(W/kg) Next to the mouth(1-g) Extremity(10-g) WI-FI (2.4GHz) 0.13 0.05 SAR Limit (W/kg) 1.6 4.0 Compliance Certification Services (Kunshan) Inc. Report No.: KSCR210900000604 Page: 4 of 52 CONTENTS 1 GENERAL INFORMATION ............................................................................................................................... 6 1.1 GENERAL DESCRIPTION OF EUT .................................................................................................................. 6 1.1.1 DUT Antenna Locations ....................................................................................................................... 7 1.2 TEST SPECIFICATION ................................................................................................................................... 8 1.3 RF EXPOSURE LIMITS .................................................................................................................................. 9 1.4 TEST LOCATION ........................................................................................................................................ 10 1.5 TEST FACILITY .......................................................................................................................................... 10 2 LABORATORY ENVIRONMENT ................................................................................................................... 11 3 SAR MEASUREMENTS SYSTEM CONFIGURATION .................................................................................. 12 3.1 THE SAR MEASUREMENT SYSTEM............................................................................................................. 12 3.2 ISOTROPIC E-FIELD PROBE EX3DV4 ......................................................................................................... 14 3.3 DATA ACQUISITION ELECTRONICS (DAE) ................................................................................................... 14 3.4 SAM TWIN PHANTOM ................................................................................................................................ 16 3.5 ELI PHANTOM ........................................................................................................................................... 16 3.6 DEVICE HOLDER FOR TRANSMITTERS ......................................................................................................... 17 3.7 MEASUREMENT PROCEDURE ...................................................................................................................... 18 3.7.1 Scanning procedure ........................................................................................................................... 18 3.7.2 Data Storage ...................................................................................................................................... 20 3.7.3 Data Evaluation by SEMCAD ............................................................................................................. 20 4 SAR MEASUREMENT VARIABILITY AND UNCERTAINTY ........................................................................ 22 4.1 SAR MEASUREMENT VARIABILITY ............................................................................................................... 22 4.2 SAR MEASUREMENT UNCERTAINTY ............................................................................................................ 23 5 DESCRIPTION OF TEST POSITION ............................................................................................................. 24 5.1 NEXT TO THE MOUTH EXPOSURE CONDITION ............................................................................................. 24 5.2 EXTREMITY EXPOSURE CONDITION ............................................................................................................ 25 6 SAR SYSTEM VERIFICATION PROCEDURE............................................................................................... 26 6.1 TISSUE SIMULATE LIQUID ........................................................................................................................... 26 6.1.1 Recipes for Tissue Simulate Liquid .................................................................................................... 26 6.1.2 Test Liquids Confirmation .............................................................................................................…

Text truncated - open the document above for the full version.

Compliance Certification Services (Kunshan) Inc. Page: 1 of 40 Appendix A for KSCR210900000601 1. Duty Cycle 1.1 Ant1 1.1.1 Test Result Ant1 Mode TX Type Frequency (MHz) T_on (ms) Period (ms) Duty Cycle (%) Duty Cycle Correction Factor (dB) Max. DC Variation (%) 802.11b SISO 2412 4.301 4.402 97.71 0.10 0.03 2437 4.302 4.405 97.66 0.10 0.07 2462 4.301 4.402 97.71 0.10 0.03 802.11g SISO 2412 0.724 0.830 87.23 0.59 0.06 2437 0.724 0.831 87.12 0.60 0.06 2462 0.724 0.831 87.12 0.60 0.06 802.11n (HT20) SISO 2412 1.335 1.442 92.58 0.33 0.03 2437 1.336 1.442 92.65 0.33 0.03 2462 1.335 1.442 92.58 0.33 0.03 Compliance Certification Services (Kunshan) Inc. Page: 2 of 40 1.1.2 Test Graph 802.11b_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11b_MCH_2437MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 3 of 40 802.11b_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11g_LCH_2412MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 4 of 40 802.11g_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11g_HCH_2462MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 5 of 40 802.11n(HT20)_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11n(HT20)_MCH_2437MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 6 of 40 802.11n(HT20)_HCH_2462MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 7 of 40 2. Bandwidth 2.1 OBW 2.1.1 Test Result Mode TX Type Frequency (MHz) Ant 99% Occupied Bandwidth (MHz) Verdict Result 802.11b SISO 2412 1 11.119 Pass 2437 1 12.266 Pass 2462 1 11.868 Pass 802.11g SISO 2412 1 16.536 Pass 2437 1 23.537 Pass 2462 1 16.576 Pass 802.11n (HT20) SISO 2412 1 17.910 Pass 2437 1 28.878 Pass 2462 1 17.948 Pass Compliance Certification Services (Kunshan) Inc. Page: 8 of 40 2.1.2 Test Graph 802.11b_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11b_MCH_2437MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 9 of 40 802.11b_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11g_LCH_2412MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 10 of 40 802.11g_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11g_HCH_2462MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 11 of 40 802.11n(HT20)_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11n(HT20)_MCH_2437MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 12 of 40 802.11n(HT20)_HCH_2462MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 13 of 40 2.2 6dB BW 2.2.1 Test Result Mode TX Type Frequency (MHz) Ant 6dB Bandwidth (MHz) Verdict Result Limit 802.11b SISO 2412 1 7.705 >=0.5 Pass 2437 1 9.057 >=0.5 Pass 2462 1 8.117 >=0.5 Pass 802.11g SISO 2412 1 13.843 >=0.5 Pass 2437 1 15.399 >=0.5 Pass 2462 1 13.844 >=0.5 Pass 802.11n (HT20) SISO 2412 1 13.836 >=0.5 Pass 2437 1 16.151 >=0.5 Pass 2462 1 13.844 >=0.5 Pass 2.2.2 Test Graph 802.11b_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11b_MCH_2437MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 14 of 40 802.11b_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11g_LCH_2412MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 15 of 40 802.11g_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11g_HCH_2462MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 16 of 40 802.11n(HT20)_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11n(HT20)_MCH_2437MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 17 of 40 802.11n(HT20)_HCH_2462MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 18 of 40 3. Maximum Conducted Output Power 3.1 Power 3.1.1 Test Result Mode TX Type Frequency (MHz) Maximum Conducted Output Power (dBm) Verdict Ant1 Limit 802.11b SISO 2412 15.27 <=30 Pass 2437 14.10 <=30 Pass 2462 15.32 <=30 Pass 802.11g SISO 2412 15.27 <=30 Pass 2437 14.59 <=30 Pass 2462 15.39 <=30 Pass 802.11n (HT20) SISO 2412 14.95 <=30 Pass 2437 14.50 <=30 Pass 2462 15.11 <=30 Pass 3.1.2 Test Graph 802.11b_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11b_MCH_2437MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 19 of 40 802.11b_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11g_LCH_2412MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 20 of 40 802.11g_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11g_HCH_2462MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 21 of 40 802.11n(HT20)_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11n(HT20)_MCH_2437MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 22 of 40 802.11n(HT20)_HCH_2462MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 23 of 40 4. Maximum Power Spectral Density 4.1 PSD 4.1.1 Test Result Mode TX Type Frequency (MHz) Maximum PSD (dBm/3kHz) Verdict Ant1 Limit 802.11b SISO 2412 -7.27 <=8 Pass 2437 -8.71 <=8 Pass 2462 -5.94 <=8 Pass 802.11g SISO 2412 -7.98 <=8 Pass 2437 -9.83 <=8 Pass 2462 -8.85 <=8 Pass 802.11n (HT20) SISO 2412 -9.32 <=8 Pass 2437 -10.09 <=8 Pass 2462 -9.28 <=8 Pass 4.1.2 Test Graph 802.11b_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11b_MCH_2437MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 24 of 40 802.11b_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11g_LCH_2412MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 25 of 40 802.11g_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11g_HCH_2462MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 26 of 40 802.11n(HT20)_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11n(HT20)_MCH_2437MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 27 of 40 802.11n(HT20)_HCH_2462MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 28 of 40 5. Unwanted Emissions In Non-restricted Frequency Bands 5.1 Ref 5.1.1 Test Result Mode TX Type Frequency (MHz) Ant Level of Reference (dBm) 802.11b SISO 2412 1 8.07 2437 1 5.51 2462 1 10.28 802.11g SISO 2412 1 5.40 2437 1 4.06 2462 1 5.46 802.11n (HT20) SISO 2412 1 5.22 2437 1 3.73 2462 1 5.16 Note1: Refer to FCC Part 15.247 (d) and ANSI C63.10-2013, the channel contains the maximum PSD …

Text truncated - open the document above for the full version.

Compliance Certification Services (Kunshan) Inc. Page: 1 of 16 Appendix C for KSCR210900000603 1. Duty Cycle 1.1 Ant1 1.1.1 Test Result Ant1 Mode TX Type Frequency (MHz) T_on (ms) Period (ms) Duty Cycle (%) Duty Cycle Correction Factor (dB) Max. DC Variation (%) 1M SISO 2402 0.378 1.250 30.24 5.19 0.03 2440 0.378 1.251 30.22 5.20 0.03 2480 0.377 1.250 30.16 5.21 0.03 Compliance Certification Services (Kunshan) Inc. Page: 2 of 16 1.1.2 Test Graph 1M_LCH_2402MHz_DataRate=_Ant1_NTNV 1M_MCH_2440MHz_DataRate=_Ant1_NTNV Compliance Certification Services (Kunshan) Inc. Page: 3 of 16 1M_HCH_2480MHz_DataRate=_Ant1_NTNV 2. Bandwidth 2.1 OBW 2.1.1 Test Result Mode TX Type Frequency (MHz) Ant 99% Occupied Bandwidth (MHz) Verdict Result 1M SISO 2402 1 1.055 Pass 2440 1 1.056 Pass 2480 1 1.054 Pass Compliance Certification Services (Kunshan) Inc. Page: 4 of 16 2.1.2 Test Graph 1M_LCH_2402MHz_DataRate=_Ant1_NTNV 1M_MCH_2440MHz_DataRate=_Ant1_NTNV Compliance Certification Services (Kunshan) Inc. Page: 5 of 16 1M_HCH_2480MHz_DataRate=_Ant1_NTNV 2.2 6dB BW 2.2.1 Test Result Mode TX Type Frequency (MHz) Ant 6dB Bandwidth (MHz) Verdict Result Limit 1M SISO 2402 1 0.708 >=0.5 Pass 2440 1 0.717 >=0.5 Pass 2480 1 0.716 >=0.5 Pass Compliance Certification Services (Kunshan) Inc. Page: 6 of 16 2.2.2 Test Graph 1M_LCH_2402MHz_DataRate=_Ant1_NTNV 1M_MCH_2440MHz_DataRate=_Ant1_NTNV Compliance Certification Services (Kunshan) Inc. Page: 7 of 16 1M_HCH_2480MHz_DataRate=_Ant1_NTNV 3. Maximum Conducted Output Power 3.1 Power 3.1.1 Test Result Mode TX Type Frequency (MHz) Maximum Peak Conducted Output Power (dBm) Verdict Ant1 Limit 1M SISO 2402 0.26 <=30 Pass 2440 -2.71 <=30 Pass 2480 -1.97 <=30 Pass Note1: Antenna Gain: -4.66dBi.; Compliance Certification Services (Kunshan) Inc. Page: 8 of 16 3.1.2 Test Graph 1M_LCH_2402MHz_DataRate=_Ant1_NTNV 1M_MCH_2440MHz_DataRate=_Ant1_NTNV Compliance Certification Services (Kunshan) Inc. Page: 9 of 16 1M_HCH_2480MHz_DataRate=_Ant1_NTNV 4. Maximum Power Spectral Density 4.1 PSD 4.1.1 Test Result Mode TX Type Frequency (MHz) Maximum PSD (dBm/3kHz) Verdict Ant1 Limit 1M SISO 2402 -15.45 <=8 Pass 2440 -18.41 <=8 Pass 2480 -18.26 <=8 Pass Note1: Antenna Gain: -4.66dBi.; Compliance Certification Services (Kunshan) Inc. Page: 10 of 16 4.1.2 Test Graph 1M_LCH_2402MHz_DataRate=_Ant1_NTNV 1M_MCH_2440MHz_DataRate=_Ant1_NTNV Compliance Certification Services (Kunshan) Inc. Page: 11 of 16 1M_HCH_2480MHz_DataRate=_Ant1_NTNV 5. Unwanted Emissions In Non-restricted Frequency Bands 5.1 Ref 5.1.1 Test Result Mode TX Type Frequency (MHz) Ant Level of Reference (dBm) 1M SISO 2402 1 -0.79 2440 1 -3.77 2480 1 -3.00 Note1: Refer to FCC Part 15.247 (d) and ANSI C63.10-2013, the channel contains the maximum PSD level was used to establish the reference level. Compliance Certification Services (Kunshan) Inc. Page: 12 of 16 5.1.2 Test Graph 1M_LCH_2402MHz_DataRate=_Ant1_NTNV 1M_MCH_2440MHz_DataRate=_Ant1_NTNV Compliance Certification Services (Kunshan) Inc. Page: 13 of 16 1M_HCH_2480MHz_DataRate=_Ant1_NTNV 5.2 CSE 5.2.1 Test Result Mode TX Type Frequency (MHz) Ant Level of Reference (dBm) Limit (dBm) Verdict 1M SISO 2402 1 -0.79 -20.79 Pass 2440 1 -0.79 -20.79 Pass 2480 1 -0.79 -20.79 Pass Note1: Refer to FCC Part 15.247 (d) and ANSI C63.10-2013, the channel contains the maximum PSD level was used to establish the reference level. Compliance Certification Services (Kunshan) Inc. Page: 14 of 16 5.2.2 Test Graph 1M_LCH_2402MHz_DataRate=_Ant1_NTNV 1M_LCH_2402MHz_DataRate=_Ant1_NTNV Compliance Certification Services (Kunshan) Inc. Page: 15 of 16 1M_MCH_2440MHz_DataRate=_Ant1_NTNV 1M_HCH_2480MHz_DataRate=_Ant1_NTNV Compliance Certification Services (Kunshan) Inc. Page: 16 of 16 1M_HCH_2480MHz_DataRate=_Ant1_NTNV

Compliance Certification Services (Kunshan) Inc. Re…

Text truncated - open the document above for the full version.