2ACQM-APB2-VGE1-AVUSION Gate

VusionGroup I 55 Place Nelson Mandela I CS 60106 | FR-92024 Nanterre Cedex, FRANCE T. +33 1 34 34 61 61 I E. [email protected] I www.vusion.com Standalone VGate BLE V2 Read all documents and system instructions carefully to minimize the risk of harming people by misuse and to avoid damage to the system or to the environment. The device Standalone VGate BLE V2 is also known as VGate as an abbreviation and easier readability within the document. Keep all documents and guidance accessible at all times. If necessary, the content of this document will be updated. You can request the latest version of the document via [email protected]. The company VusionGroup assumes no liability for any damage caused by improper installation or handling. The installation instructions are intended for trained electricians who can exhibit the following qualifications: • Knowledge of the use of tools and work instructions. • Knowledge of the usable conditions of the tool. • Knowledge of the electrical safety instructions. • Knowledge of the electrical building regulations. • Knowledge of the relevant standards. • Knowledge of the assembly schedule. Mounting location The Access Point can be mounted on a: • Concrete wall • Mortar wall • T-Mounting rail Select the installation location for the Access Point carefully. Pay particular attention to the following requirements: • Install the Access Point only in areas where the permissible environmental conditions can be observed. • Don’t install the Access Point in an environment with direct sunlight or heat source. • Mount the metal bracket for the Access Point on dry surfaces only. • Don’t mount the Access Point on any flammable material. • The minimum bearing capacity of the substrate has to be 5 kg. • The LAN cable manufacturer must be compliant to the default specifications (e.g. minimum bend radius of 3cm) Approachability • Mount the metal bracket in a way that the Access Point can easily be attached to it by applying light pressure to it. • Make sure that the LAN socket is easily accessible after the installation. • The LED must be clearly visible after the installation is completed. Page 2 • It is important that the inner surface of the Access Point has sufficient air circulation. The vents must be free to ensure sufficient ventilation to prevent overheating. The mounting material (e.g. screws or pegs) for securing the metal bracket on concrete walls is not part of the scope of delivery. It has to be purchased separately if needed, depending on the actual substrate. Maintenance • The VGate does not contain parts that have to be maintained by the user. The VGate must NOT be opened. For necessary maintenance or repair works always contact the manufacturer. • The device is provided with a warranty seal. Damaging the warranty seal expires all warranty claims. Problems which require maintenance or replacement of the VGate Unplug the power supply and contact Vusion Group if following cases occur: • The VGate was strewn with liquid. • The VGate has been dropped or damaged. • The LAN port of the VGate is damaged. • The LED of the VGate no longer lights up. Contact the manufacturer if despite intended purpose the device is not working and none of the mentioned cases occurred. Operating and storage of the VGate If the mounting of the VGate is intended to be done at a later date, please assure proper storage: • Operate the VGate at a temperature from 0°C to +40°C. • Store the VGate in the delivered original packing at a temperature from -20°C up to +70°C • Store the VGate in the delivered original packing at a humidity from 10% up to 85% (non-condensing) • The VGate must be switched OFF while stored. • Check the condition of the VGate after unpacking. • Do not store other objects on top of the VGate. Improper Use VusionGroup is not responsible and does not assume liability for damage or injury to persons, property, environment and the VGate itself caused by improper installation or improper handling. Page 3 The operator assumes liability for any damage that results from improper use. The following usage is not allowed: • Don't drop the VGate. • Keep the VGate away from water. • Don’t use the VGate with defective parts. • Don’t use the VGate with spare parts and accessories which are not examined and approved by VusionGruop. • Unauthorized changes or modifications to the VGate and their components without the consent of VusionGroup are not allowed. • Don't throw VGate into the dustbin. Deposit VGate at a reprocessing company. • Contact VusionGroup for more details about the removal process. • Please do not use any liquid or spray cleaners directly on the surface of the VGate. Environmental protection and removal Please ensure that you meet all local law restrictions when removing the VGate. The VGate correlates to the ROHS guideline. Certificates Hereby, Vusion Group declares that the radio equipment Standalone VGate BLE V2 (Model: APB2-VGE1-A) is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: https://www.ses-imagotag.com/en/infrastructure-alliances/doc- vusion-infrastructure/ This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION TO USERS Changes or modifications not expressly approved by the party responsible for compliance could void the user`s authority to operate the equipment. FCC rules apply to the following product: APB2-VGE1-A This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence- exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any Page 4 General remarks The VGate m…

Text truncated - open the document above for the full version.

VusionGroup GmbH – Kalsdorferstraße12 | 8072 Fernitz-Mellach – Austria FB: FN350927w I HG: Graz I UID: ATU65936017 I WEEE: DE 65879240 Tel: +43 (0) 5 9460-400 I Fax: +43 (0) 5 9460-900 I [email protected] www.vusion.com Covered List, § 2.911(d)(5) Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 30.09.2025 To whom it may concern, FCC ID: 2ACQM-APB2-VGE1-A regarding the FCC 22-84 Report and Order and the Commission’s Covered List https://www.fcc.gov/supplychain/coveredlist. 1 VusionGroup GmbH (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. VusionGroup GmbH (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. The software to be loaded prior to marketing of the equipment identified above is not “covered” software manufactured by any entity including predecessors, successors, parents, subsidiaries, or affiliates or any entity which has rebranded or relabeled the software produced by the entity(ies) identified on the “Covered List.” Sincerely, Philipp Jauck Head of IP Management & Regulatory Compliance VusionGroup GmbH Kalsdorfer Straße 12 8072 Fernitz-Mellach Austria www.vusion.com 1 The inclusion of producers or providers of equipment or services identified on this list should be read to include the subsidiaries and affiliates of such entities. Docusign Envelope ID: B3A46B29-74FB-4FC7-A727-20AEF51FB921

FCC Agent Authorization Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 9/30/2025 To whom it may concern, Sincerely, Philipp Jauck, Head of IP Management & Regulatory Compliance VusionGroup GmbH Kalsdorfer Strasse 12 8072 Fernitz-Mellach, Austria Mobil: +43 664 88252901 [email protected] We, VusionGroup GmbH, FRN: 0024111486, hereby authorize Gerald Artner of TÜV AUSTRIA GmbH to act on our behalf in all matters relating to applications for equipment authorization of Standalone VGate BLE V2 FCC ID: 2ACQM-APB2-VGE1-A , including the signing of all documents relating to these matters. Any and all acts carried out by Gerald Artner of TÜV AUSTRIA GmbH on our behalf shall have the same effect as acts of our own. All statements we make in our request for equipment authorization are true and correct to the best of our knowledge and belief. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. VusionGroup GmbH – Kalsdorfer Straße 12 – 8072 Fernitz-Mellach – Austria FB: FN350927w I HG: Graz I UID: ATU65936017 I WEEE: DE 65879240 Tel: +43 (0) 5 9460-400 I Fax: +43 (0) 5 9460-900 www.vusion.com Docusign Envelope ID: B3A46B29-74FB-4FC7-A727-20AEF51FB921

Docusign Envelope ID: B93CF653-3DCC-4EEA-B33A-7E1069D6FB1D

Coverletter: VusionGroup GmbH wants to get FCC-Certification for the following device: 2ACQM-APB2-VGE1-A. The unit will get the following FCC-ID: 2ACQM-APB2-VGE1-A List of documents: Exhibit Thema File Exhibit 01 Label and placement label_placement.pdf Exhibit 02 Applicant Authorization Covered List US Agent for Service of Process Vusion US Agent .pdf Covered List APB2-VGE1-A.pdf US - Authorization Letter FCC_APB2-VGE1-A.pdf Exhibit 03 External Photos photos_external.pdf * Exhibit 04 Block Diagrams block diagrams.pdf * Exhibit 05 Schematic Diagrams schematics.pdf Exhibit 06 Testreport Part 15 antenna information 2025-AT-TC-EE-ET-EX-0-000028-FG- 029_signed_noPhotos.pdf Part 15 Antenna Information.pdf Exhibit 07 Test Set-up Photos photos_setup.pdf Exhibit 08 User Manual Standalone VGate BLE V2 Productionsheet-2025- 09-23.pdf Exhibit 09 Internal Photos photos_internal.pdf Exhibit 11 RF exposure 2025-AT-TC-EE-ET-EX-0-000028-FG- 029_signed_noPhotos.pdf * Exhibit 12 Operational Description Antenna details 2025-10-08 Operational Description APB2-VGE1- A.pdf APB2-VGE1-A_Antenna sheet.pdf Exhibit 13 Cover letter Request for confidentiality This file US - Long Term - Short Term_APB2-VGE1-A.pdf For the Exhibits marked with ‘*’ VusionGroup GmbH requested Long-Term Confidentiality according to 47 CFR 0.457 and 0.459 of the FCC rules because these are sensitive parts owned by this company and include much of know-how or sensitive data, it will not be provided to the public. The labelling on some photos may be not the actual status. The correct labelling is shown on the label photo in Exhibit 1.

Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern, FCC ID Number Product: Title/Model o Product Code: APB2-VGE1-A / FCC: 2ACQM-APB2-VGE1-A For the product stated above, we request that the following information be held Long-Term confidential: 1. Circuit diagrams 2. Block diagram, Operational description submitted as Equipment Authorization If you have any questions, please feel free to contact me at the address shown below. Sincerely, Philipp Jauck, Head of IP Management & Regulatory Compliance VusionGroup GmbH Kalsdorfer Strasse 12 8072 Fernitz-Mellach, Austria Mobil: +43 664 88252901 [email protected] CONFIDENTIALITY REQUEST September 30, 2025 The above exhibits contain VusionGroup GmbH trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our Smart Tagging System. This material is not customarily available to the general public and we request that it be withheld from public inspection. the Freedom of Information Act, VusionGroup GmbH (FRN: 0023782022) requests confidentiality for the following products: VusionGroup GmbH – Kalsdorfer Straße 12 – 8072 Fernitz-Mellach – Austria FB: FN350927w I HG: Graz I UID: ATU65936017 I WEEE: DE 65879240 Tel: +43 (0) 5 9460-400 I Fax: +43 (0) 5 9460-900 www.vusion.com Docusign Envelope ID: B3A46B29-74FB-4FC7-A727-20AEF51FB921

www.tuv.at | [email protected] | T‹V Æ DN- FM-INE-EMV-ALL-Anl2_en Rev00 Appendix 2 Photodocumentation Description: Top view Competence Center: Electrical & Enviromental Test report reference: 2025-AT-TC-EE-ET-EX-0- 000028-FG-029 Page: 1 of 15 Date: 19.09.2025 www.tuv.at | [email protected] | T‹V Æ DN- FM-INE-EMV-ALL-Anl2_en Rev00 Appendix 2 Photodocumentation Description: Bottom view Competence Center: Electrical & Enviromental Test report reference: 2025-AT-TC-EE-ET-EX-0- 000028-FG-029 Page: 2 of 15 Date: 19.09.2025 www.tuv.at | [email protected] | T‹V Æ DN- FM-INE-EMV-ALL-Anl2_en Rev00 Appendix 2 Photodocumentation Description: Label Competence Center: Electrical & Enviromental Test report reference: 2025-AT-TC-EE-ET-EX-0- 000028-FG-029 Page: 3 of 15 Date: 19.09.2025

www.tuv.at | [email protected] | T‹V Æ DN- FM-INE-EMV-ALL-Anl2_en Rev00 Appendix 2 Photodocumentation Description: Case opened Competence Center: Electrical & Enviromental Test report reference: 2025-AT-TC-EE-ET-EX-0- 000028-FG-029 Page: 4 of 15 Date: 19.09.2025 www.tuv.at | [email protected] | T‹V Æ DN- FM-INE-EMV-ALL-Anl2_en Rev00 Appendix 2 Photodocumentation Description: Main and Antenna PCB view #1 Competence Center: Electrical & Enviromental Test report reference: 2025-AT-TC-EE-ET-EX-0- 000028-FG-029 Page: 5 of 15 Date: 19.09.2025 www.tuv.at | [email protected] | T‹V Æ DN- FM-INE-EMV-ALL-Anl2_en Rev00 Appendix 2 Photodocumentation Description: Main and Antenna PCB view #2 Competence Center: Electrical & Enviromental Test report reference: 2025-AT-TC-EE-ET-EX-0- 000028-FG-029 Page: 6 of 15 Date: 19.09.2025 www.tuv.at | [email protected] | T‹V Æ DN- FM-INE-EMV-ALL-Anl2_en Rev00 Appendix 2 Photodocumentation Description: Main PCB without additional PCBs Competence Center: Electrical & Enviromental Test report reference: 2025-AT-TC-EE-ET-EX-0- 000028-FG-029 Page: 7 of 15 Date: 19.09.2025 www.tuv.at | [email protected] | T‹V Æ DN- FM-INE-EMV-ALL-Anl2_en Rev00 Appendix 2 Photodocumentation Description: Antenna detail view Competence Center: Electrical & Enviromental Test report reference: 2025-AT-TC-EE-ET-EX-0- 000028-FG-029 Page: 8 of 15 Date: 19.09.2025 www.tuv.at | [email protected] | T‹V Æ DN- FM-INE-EMV-ALL-Anl2_en Rev00 Appendix 2 Photodocumentation Description: Compute PCB view #1 Competence Center: Electrical & Enviromental Test report reference: 2025-AT-TC-EE-ET-EX-0- 000028-FG-029 Page: 9 of 15 Date: 19.09.2025 www.tuv.at | [email protected] | T‹V Æ DN- FM-INE-EMV-ALL-Anl2_en Rev00 Appendix 2 Photodocumentation Description: Compute PCB view #2 Competence Center: Electrical & Enviromental Test report reference: 2025-AT-TC-EE-ET-EX-0- 000028-FG-029 Page: 10 of 15 Date: 19.09.2025 www.tuv.at | [email protected] | T‹V Æ DN- FM-INE-EMV-ALL-Anl2_en Rev00 Appendix 2 Photodocumentation Description: Radio PCB view #1 Competence Center: Electrical & Enviromental Test report reference: 2025-AT-TC-EE-ET-EX-0- 000028-FG-029 Page: 11 of 15 Date: 19.09.2025 www.tuv.at | [email protected] | T‹V Æ DN- FM-INE-EMV-ALL-Anl2_en Rev00 Appendix 2 Photodocumentation Description: Radio PCB view #2 Competence Center: Electrical & Enviromental Test report reference: 2025-AT-TC-EE-ET-EX-0- 000028-FG-029 Page: 12 of 15 Date: 19.09.2025

www.tuv.at | [email protected] No. Test Report: 2025-AT-TC-EE-ET-EX-0-000028-FG-029 Grundvorlage / Basic Template: FM-TAGMBH-KBS-0100b_Grundvorlage Pr ̧fbericht akkreditiert-EN, Rev. 04 FM-TAGMBH-EE- EMV-0100a Revision: 06 Page 1 of 47 T‹V AUSTRIA GMBH Excerpts may only be reproduced with the permission of T‹V AUSTRIA GMBH. All conformity assessment activities were carried out in accordance with the QM system of T‹V AUSTRIA GMBH. Deutschstrafle 10 1230 Vienna / Austria Tel.: +43 (0)504 54 Mail: [email protected] Web: http://www.tuv.at Test Report of the accredited Testing Laboratory 0274 – T‹V AUSTRIA GMBH – Location Vienna - EMC Radio ISED Laboratory Company Number: 2932K, CAB identifier: AT0001 Order Confirmation Number: 2025-AT-TC-EE-ET-EX-0-000028 About the Radio - test listed below Andreas Malek Examined by / Testing Laboratory T‹V AUSTRIA GMBH Michael Emminger Approved by / Testing Laboratory T‹V AUSTRIA GMBH The results of this test report only refer to the provided equipment. Issued on 19.09.2025 in Vienna / TIC Applicant: VusionGroup GmbH Kalsdorfer Strasse 12 A – 8072 Fernitz-Mellach Test object: Electronic shelf labelling system Product Marketing Name: VUSION Gate Model: APB2-VGE1-A FCC-ID: 2ACQM-APB2-VGE1-A IC-ID: 12154A-APB2VGE1A Serial number: Prototype Accredited regulation: FCC: 47 CFR Part 15 (eCFR 07.07.2025) RSS-247 Issue 3, August 2023 RSS-102 Issue 6, December 2023 ANSI C63.10-2013 www.tuv.at | [email protected] No. Test Report: 2025-AT-TC-EE-ET-EX-0-000028-FG-029 Grundvorlage / Basic Template: FM-TAGMBH-KBS-0100b_Grundvorlage Pr ̧fbericht akkreditiert-EN, Rev. 04 FM-TAGMBH-EE- EMV-0100a Revision: 06 Page 2 of 47 T‹V AUSTRIA GMBH Excerpts may only be reproduced with the permission of T‹V AUSTRIA GMBH. All conformity assessment activities were carried out in accordance with the QM system of T‹V AUSTRIA GMBH. Deutschstrafle 10 1230 Vienna / Austria Tel.: +43 (0)504 54 Mail: [email protected] Web: http://www.tuv.at Contents Designation PAGE 1. Applicant 3 2. Description of EUT 4 3. Standards / Final result 5 4. Test results List of measurements according to 47 CFR 15 and RSS-247 4.1 Test object data 6 4.2 Number of channels and channel spacing 7 4.3 6 dB Bandwidth 8 – 10 4.4 99% dB Bandwidth 11 – 13 4.5 Maximum Peak RF Power Output 14 4.6 Power Spectral Density 15 – 17 4.7 Additional provisions to the general radiated emission limitations 18 – 19 4.8 Emissions in restricted bands 20 – 36 4.9 AC conducted emissions (15.207) 37 – 42 4.10 RF Exposure 43 – 47 Appendix Designation PAGES 1 Test equipment used 5 2 Photodocumentation 15 www.tuv.at | [email protected] No. Test Report: 2025-AT-TC-EE-ET-EX-0-000028-FG-029 Grundvorlage / Basic Template: FM-TAGMBH-KBS-0100b_Grundvorlage Pr ̧fbericht akkreditiert-EN, Rev. 04 FM-TAGMBH-EE- EMV-0100a Revision: 06 Page 3 of 47 T‹V AUSTRIA GMBH Excerpts may only be reproduced with the permission of T‹V AUSTRIA GMBH. All conformity assessment activities were carried out in accordance with the QM system of T‹V AUSTRIA GMBH. Deutschstrafle 10 1230 Vienna / Austria Tel.: +43 (0)504 54 Mail: [email protected] Web: http://www.tuv.at 1. Applicant Company: VusionGroup GmbH Department: Product & Project Manager Address: A – 8072 Fernitz-Mellach; Kalsdorfer Strasse 12 Contact person: Mrs. Tamara Risek Gmajnic EUT received on: 07.07.2025 and 17.09.2025 Tests were performed on: 07.07. to 09.07.2025, 17.09. and 18.09.2025 www.tuv.at | [email protected] No. Test Report: 2025-AT-TC-EE-ET-EX-0-000028-FG-029 Grundvorlage / Basic Template: FM-TAGMBH-KBS-0100b_Grundvorlage Pr ̧fbericht akkreditiert-EN, Rev. 04 FM-TAGMBH-EE- EMV-0100a Revision: 06 Page 4 of 47 T‹V AUSTRIA GMBH Excerpts may only be reproduced with the permission of T‹V AUSTRIA GMBH. All conformity assessment activities were carried out in accordance with the QM system of T‹V AUSTRIA GMBH. Deutschstrafle 10 1230 Vienna / Austria Tel.: +43 (0)504 54 Mail: [email protected] Web: http://www.tuv.at 2. Description of EUT EUT: Electronic shelf labelling system Product Name: VUSION Gate Model: APB2-VGE1-A Serial Number: Prototype Manufacturer: VusionGroup GmbH Description: VusionGroup GmbH provided the following configuration for the measurements: Prototype with special firmware for continuous transmission PoE Adapter for measurements in PoE Mode: Manufacturer PHIHONG Model: POE21U-1AF Operating mode: The measurements were carried out at the following running states: test-firmware running, transmitting continuously Technical data EUT: Rated voltage: 5V or PoE Rated frequency: DC Mains voltage during the tests: PoE powered Output power: 4,57 mW eirp Frequency range: 2402 – 2480 MHz Channel separation: 2 MHz Climatic conditions in the emc laboratory: Relative humidity: 58% Temperature: 23∞C www.tuv.at | [email protected] No. Test Report: 2025-AT-TC-EE-ET-EX-0-000028-FG-029 Grundvorlage / Basic Template: FM-TAGMBH-KBS-0100b_Grundvorlage Pr ̧fbericht akkreditiert-EN, Rev. 04 FM-TAGMBH-EE- EMV-0100a Revision: 06 Page 5 of 47 T‹V AUSTRIA GMBH Excerpts may only be reproduced with the permission of T‹V AUSTRIA GMBH. All conformity assessment activities were carried out in accordance with the QM system of T‹V AUSTRIA GMBH. Deutschstrafle 10 1230 Vienna / Austria Tel.: +43 (0)504 54 Mail: [email protected] Web: http://www.tuv.at 3. Standards / Final result Name Title Deviation Result FCC: 47 CFR Part 15 (eCFR 07.07.2025) RADIO FREQUENCY DEVICES none OK RSS-247 Issue 3, August 2023 Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence-Exempt Local Area Network (LE-LAN) Devices none OK RSS-102 Issue 6, December 2023 Radio Frequency (RF) Exposure Compliance of Radiocommunication Apparatus (All Frequency Bands) none OK ANSI C63.10-2013 American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices none OK Result: Opinions and interpretation of testing laboratory OK: EUT passed NOK: EUT failed T‹V Austria GmbH confirms that it is not owned by, controlled by, or subject to the direction of a prohibited entity. www.…

Text truncated - open the document above for the full version.

www.tuv.at | [email protected] No. Test Report: 2025-AT-TC-EE-ET-EX-0-000028-FG-029 Grundvorlage / Basic Template: FM-TAGMBH-KBS-0100b_Grundvorlage Pr ̧fbericht akkreditiert-EN, Rev. 04 FM-TAGMBH-EE- EMV-0100a Revision: 06 Page 1 of 47 T‹V AUSTRIA GMBH Excerpts may only be reproduced with the permission of T‹V AUSTRIA GMBH. All conformity assessment activities were carried out in accordance with the QM system of T‹V AUSTRIA GMBH. Deutschstrafle 10 1230 Vienna / Austria Tel.: +43 (0)504 54 Mail: [email protected] Web: http://www.tuv.at Test Report of the accredited Testing Laboratory 0274 – T‹V AUSTRIA GMBH – Location Vienna - EMC Radio ISED Laboratory Company Number: 2932K, CAB identifier: AT0001 Order Confirmation Number: 2025-AT-TC-EE-ET-EX-0-000028 About the Radio - test listed below Andreas Malek Examined by / Testing Laboratory T‹V AUSTRIA GMBH Michael Emminger Approved by / Testing Laboratory T‹V AUSTRIA GMBH The results of this test report only refer to the provided equipment. Issued on 19.09.2025 in Vienna / TIC Applicant: VusionGroup GmbH Kalsdorfer Strasse 12 A – 8072 Fernitz-Mellach Test object: Electronic shelf labelling system Product Marketing Name: VUSION Gate Model: APB2-VGE1-A FCC-ID: 2ACQM-APB2-VGE1-A IC-ID: 12154A-APB2VGE1A Serial number: Prototype Accredited regulation: FCC: 47 CFR Part 15 (eCFR 07.07.2025) RSS-247 Issue 3, August 2023 RSS-102 Issue 6, December 2023 ANSI C63.10-2013 www.tuv.at | [email protected] No. Test Report: 2025-AT-TC-EE-ET-EX-0-000028-FG-029 Grundvorlage / Basic Template: FM-TAGMBH-KBS-0100b_Grundvorlage Pr ̧fbericht akkreditiert-EN, Rev. 04 FM-TAGMBH-EE- EMV-0100a Revision: 06 Page 2 of 47 T‹V AUSTRIA GMBH Excerpts may only be reproduced with the permission of T‹V AUSTRIA GMBH. All conformity assessment activities were carried out in accordance with the QM system of T‹V AUSTRIA GMBH. Deutschstrafle 10 1230 Vienna / Austria Tel.: +43 (0)504 54 Mail: [email protected] Web: http://www.tuv.at Contents Designation PAGE 1. Applicant 3 2. Description of EUT 4 3. Standards / Final result 5 4. Test results List of measurements according to 47 CFR 15 and RSS-247 4.1 Test object data 6 4.2 Number of channels and channel spacing 7 4.3 6 dB Bandwidth 8 – 10 4.4 99% dB Bandwidth 11 – 13 4.5 Maximum Peak RF Power Output 14 4.6 Power Spectral Density 15 – 17 4.7 Additional provisions to the general radiated emission limitations 18 – 19 4.8 Emissions in restricted bands 20 – 36 4.9 AC conducted emissions (15.207) 37 – 42 4.10 RF Exposure 43 – 47 Appendix Designation PAGES 1 Test equipment used 5 2 Photodocumentation 15 www.tuv.at | [email protected] No. Test Report: 2025-AT-TC-EE-ET-EX-0-000028-FG-029 Grundvorlage / Basic Template: FM-TAGMBH-KBS-0100b_Grundvorlage Pr ̧fbericht akkreditiert-EN, Rev. 04 FM-TAGMBH-EE- EMV-0100a Revision: 06 Page 3 of 47 T‹V AUSTRIA GMBH Excerpts may only be reproduced with the permission of T‹V AUSTRIA GMBH. All conformity assessment activities were carried out in accordance with the QM system of T‹V AUSTRIA GMBH. Deutschstrafle 10 1230 Vienna / Austria Tel.: +43 (0)504 54 Mail: [email protected] Web: http://www.tuv.at 1. Applicant Company: VusionGroup GmbH Department: Product & Project Manager Address: A – 8072 Fernitz-Mellach; Kalsdorfer Strasse 12 Contact person: Mrs. Tamara Risek Gmajnic EUT received on: 07.07.2025 and 17.09.2025 Tests were performed on: 07.07. to 09.07.2025, 17.09. and 18.09.2025 www.tuv.at | [email protected] No. Test Report: 2025-AT-TC-EE-ET-EX-0-000028-FG-029 Grundvorlage / Basic Template: FM-TAGMBH-KBS-0100b_Grundvorlage Pr ̧fbericht akkreditiert-EN, Rev. 04 FM-TAGMBH-EE- EMV-0100a Revision: 06 Page 4 of 47 T‹V AUSTRIA GMBH Excerpts may only be reproduced with the permission of T‹V AUSTRIA GMBH. All conformity assessment activities were carried out in accordance with the QM system of T‹V AUSTRIA GMBH. Deutschstrafle 10 1230 Vienna / Austria Tel.: +43 (0)504 54 Mail: [email protected] Web: http://www.tuv.at 2. Description of EUT EUT: Electronic shelf labelling system Product Name: VUSION Gate Model: APB2-VGE1-A Serial Number: Prototype Manufacturer: VusionGroup GmbH Description: VusionGroup GmbH provided the following configuration for the measurements: Prototype with special firmware for continuous transmission PoE Adapter for measurements in PoE Mode: Manufacturer PHIHONG Model: POE21U-1AF Operating mode: The measurements were carried out at the following running states: test-firmware running, transmitting continuously Technical data EUT: Rated voltage: 5V or PoE Rated frequency: DC Mains voltage during the tests: PoE powered Output power: 4,57 mW eirp Frequency range: 2402 – 2480 MHz Channel separation: 2 MHz Climatic conditions in the emc laboratory: Relative humidity: 58% Temperature: 23∞C www.tuv.at | [email protected] No. Test Report: 2025-AT-TC-EE-ET-EX-0-000028-FG-029 Grundvorlage / Basic Template: FM-TAGMBH-KBS-0100b_Grundvorlage Pr ̧fbericht akkreditiert-EN, Rev. 04 FM-TAGMBH-EE- EMV-0100a Revision: 06 Page 5 of 47 T‹V AUSTRIA GMBH Excerpts may only be reproduced with the permission of T‹V AUSTRIA GMBH. All conformity assessment activities were carried out in accordance with the QM system of T‹V AUSTRIA GMBH. Deutschstrafle 10 1230 Vienna / Austria Tel.: +43 (0)504 54 Mail: [email protected] Web: http://www.tuv.at 3. Standards / Final result Name Title Deviation Result FCC: 47 CFR Part 15 (eCFR 07.07.2025) RADIO FREQUENCY DEVICES none OK RSS-247 Issue 3, August 2023 Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence-Exempt Local Area Network (LE-LAN) Devices none OK RSS-102 Issue 6, December 2023 Radio Frequency (RF) Exposure Compliance of Radiocommunication Apparatus (All Frequency Bands) none OK ANSI C63.10-2013 American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices none OK Result: Opinions and interpretation of testing laboratory OK: EUT passed NOK: EUT failed T‹V Austria GmbH confirms that it is not owned by, controlled by, or subject to the direction of a prohibited entity. www.…

Text truncated - open the document above for the full version.

Part 15 Antenna Information Description: The device uses an inverted-F antenna (IFA) in sheetl metal technology which has a matching network on the PCB and is fed by a coaxial cable. Photograph of the assembled antenna, coaxial waveguide feed line and matching network: Ruler dimensions are in centimeter. Measured gain: Details are given in the test report exhibit.

www.tuv.at | [email protected] | T‹V Æ DN- FM-INE-EMV-ALL-Anl2_en Rev00 Appendix 2 Photodocumentation Description: Test setup below 30 MHz Competence Center: Electrical & Enviromental Test report reference: 2025-AT-TC-EE-ET-EX-0- 000028-FG-029 Page: 13 of 15 Date: 19.09.2025 www.tuv.at | [email protected] | T‹V Æ DN- FM-INE-EMV-ALL-Anl2_en Rev00 Appendix 2 Photodocumentation Description: Test setup 30 MHz - 1 GHz Competence Center: Electrical & Enviromental Test report reference: 2025-AT-TC-EE-ET-EX-0- 000028-FG-029 Page: 14 of 15 Date: 19.09.2025 www.tuv.at | [email protected] | T‹V Æ DN- FM-INE-EMV-ALL-Anl2_en Rev00 Appendix 2 Photodocumentation Description: Test setup above 1 GHz Competence Center: Electrical & Enviromental Test report reference: 2025-AT-TC-EE-ET-EX-0- 000028-FG-029 Page: 15 of 15 Date: 19.09.2025 --- END OF TEST REPORT ---