2ACQM-EDB1-0160-AVUSION 1.6

VUSION Bluetooth LE Product Manual SES-imagotag GmbH I Kalsdorfer Straße 12 I A-8072 Fernitz-Mellach - AUSTRIA CR: FN350927w I Commercial court: Graz I UID : ATU65936017 T. +43 (0) 5 94604-00 I E. [email protected] I www.ses-imagotag.com VUSION Bluetooth LE Product Specification SES-IMAGOTAG Page 2 Read all documents and system instructions carefully to minimize the risk of injuring persons and to avoid damage to the system or damage to the environment. Always keep all documents and guidance accessible. If necessary, the content of this document will be updated. You can request the latest version of the document via [email protected]. About ESLs An electronic shelf label is a device that shows article data and price information on its display. In comparison to printed labels the information is automatically updated if price or article data changes. In this product specification the focus is set on the product family VUSION Bluetooth LE. With its new Bluetooth LE wireless signal range it is a new product range and the line-up has the display sizes 1.5”, 1.6”, 2.1”, 2.2”, 2.6”, 4.2”, 6.0”, 7.4” and 9.7” General Key Features • Bluetooth LE proprietary radio protocol • Radio coverage: up to 25 meters • Bi-directional communication • Ultra-low power consumption • Full graphical e-Ink display with paper-like readability • Super wide viewing angle (nearly 180 degrees) • Flexible mounting options available • May be used in landscape and portrait mode • Fast response time • 128-bit AES encryption • Multiple pages support with preloading and fast page switching • Integrated Passive NFC tag The installation instructions are intended for trained electricians who can exhibit the following qualifications: • Knowledge of the use of tools and work instructions. • Knowledge of the usable conditions of the tool. • Knowledge of the electrical safety instructions. • Knowledge of the electrical building regulations. • Knowledge of the relevant standards. • Knowledge of the assembly schedule. VUSION Bluetooth LE Product Manual SES-imagotag GmbH I Kalsdorfer Straße 12 I A-8072 Fernitz-Mellach - AUSTRIA CR: FN350927w I Commercial court: Graz I UID : ATU65936017 T. +43 (0) 5 94604-00 I E. [email protected] I www.ses-imagotag.com Overview about VUSION Engage labels Product name Model Resolution DPI Display colors Usable pages Battery Type IP rating VUSION 1.5 EDB1-0150-A 200x200 186 b/w/r 2 Coin Cell (CR2450) IP53 VUSION 1.6 EDB1-0160-A 152x152 140 b/w/r 2 Coin Cell (CR2450) IP53 VUSION 2.1 EDB1-0210-A 248x128 135 b/w/r 2 Coin Cell (CR2450) IP53 VUSION 2.1 EDB1-0210-A 248x128 135 b/w/r 2 Coin Cell (CR2450) IP53 VUSION 2.2 EDB1-0220-A EDB1-0220-B 212x104 111 b/w/r 2 Coin Cell (CR2450) IP53 VUSION 2.2 F EDB1-0220-A 212x104 111 b/w 2 Coin Cell (CR2450) IP53 VUSION 2.6 EDB1-0260-A 296x152 125 b/w/r 2 Coin Cell (CR2450) IP53 VUSION 4.2 EDB1-0420-A 400x300 120 b/w/r 2 Coin Cell (CR2450) IP53 VUSION 4.2 WP EWB1-0420-A 400x300 120 b/w/r 2 Coin Cell (CR2450) IP68 VUSION 6.0 EDB2-0600-B 600x448 132 b/w/r 2 Coin Cell (CR2450) IP53 VUSION 7.4 EDB1-0740-A 480x800 126 b/w/r 2 Coin Cell (CR2450) IP53 VUSION 9.7 EDB1-0970-A 672x960 121 b/w/r 2 Coin Cell (CR2450) IP53 VUSION Bluetooth LE Product Manual SES-imagotag GmbH I Kalsdorfer Straße 12 I A-8072 Fernitz-Mellach - AUSTRIA CR: FN350927w I Commercial court: Graz I UID : ATU65936017 T. +43 (0) 5 94604-00 I E. [email protected] I www.ses-imagotag.com General remarks The SES-imagotag VUSION Labels must be installed according to the mounting instructions of the producer. In rare cases it may occur that the usage of wireless appliances is restricted by the building owner (e.g. Airport or Hospital). Please contact the appropriate authorities before installing the SES-imagotag VUSION Labels. Environmental General E-Paper displays are moisture and UV sensitive. The absolute rating operating environments describes the boundary conditions for updating the display while the absolute rating storage environment (see Storage and warehousing) describes the boundary conditions for a display not updating. BWR R2.0 BW Operating temperature 0° C to +40° C -25°C - 10°C Cleaning Instructions Clean the electronic label with the help of a damp cloth. Use only common household cleaners. Do not clean the label with alcohol, solvents and / or abrasive cleaning products. Note: Do not use liquid or aerosol cleaners and keep it away from water. Temperature and Humidity Conditions High humidity combined with low temperature are not recommended. Low temperature will reduce the battery lifetime. Page 5 Storage and warehousing While displays are rated to perform according to specification for the warranty period at the absolute specified operating environment, the better the storage condition, the better the E- Paper displays will perform. Like other moisture and UV sensitive components, we recommend that our labels are stored in temperature and humidity-controlled environments, and whenever possible, under below defined Optimal Storage Conditions, away from sunlight, to optimize their performance. It is strongly recommended to observe the following points to ensure the best operation, functioning and battery lifetime: Storage temperature and humidity BWR BW Storage temperature -20° C to +50° C -20° C to +50° C Storage humidity 40% - 70% 40% - 70% Intended Use The VUSION electronic shelf label family is exclusively designed to connect to Access Points of the company SES-imagotag or acknowledged partners via radio. The device may only be used in areas where the environmental fulfill the requirements described in the chapter “Environmental”. Cleaning Instructions Clean the electronic label with the help of a damp cloth. Use only common household cleaners. Do not clean the label with alcohol, solvents and / or abrasive cleaning products. Note: Do not use liquid or aerosol cleaners and keep it away from water. Page 6 Improper use SES-imagotag shall not be responsible for def…

Text truncated - open the document above for the full version.

FCC Agent Authorization Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 4/19/2023 To whom it may concern, Sincerely, Philipp Jauck, Head of IP Management & Regulatory Compliance SES-imagotag GmbH Kalsdorfer Strasse 12 8072 Fernitz-Mellach, Austria Mobil: +43 664 88252901 [email protected] www.ses-imagotag.com We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. We, SES-imagotag GmbH, FRN: 0024111486, hereby authorize TÜV AUSTRIA Services GmbH to act on our behalf in all matters relating to applications for equipment authorization of VUSION 1.6 FCC ID: 2ACQM-EDB1-0160-A, including the signing of all documents relating to these matters. Any and all acts carried out by TÜV AUSTRIA Services GmbH on our behalf shall have the same effect as acts of our own. All statements we make in our request for equipment authorization are true and correct to the best of our knowledge and belief. SES-imagotag GmbH I Kalsdorfer Straße 12 I A-8072 Fernitz-Mellach - AUSTRIA FB: FN350927w I HG : Graz I UID : ATU65936017 I WEEE : DE 65879240 T. +43 (0) 5 9460-400 I F. +43 (0) 5 9460-900 I E. [email protected] I www.ses-imagotag.com

SES-imagotag GmbH I Kalsdorfer Straße 12 I A-8072 Fernitz-Mellach - AUSTRIA CR: FN350927w I Commercial court: Graz I UID : ATU65936017 T. +43 (0) 5 94604-00 I E. [email protected] I www.ses-imagotag.com Covered List, § 2.911(d)(5) Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 February 1, 2023 To whom it may concern, regarding the FCC 22-84 Report and Order and the Commission’s Covered List https://www.fcc.gov/supplychain/coveredlist. 1 SES-imagotag GmbH (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. SES-imagotag GmbH (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Philipp Jauck Head of IP Management & Regulatory Compliance Phone: +43 664 88252901 [email protected] www.ses-imagotag.com SES-imagotag GmbH Kalsdorfer Strasse 12 8072 Fernitz-Mellach Austria 1 The inclusion of producers or providers of equipment or services identified on this list should be read to include the subsidiaries and affiliates of such entities.

SES-imagotag GmbH I Kalsdorfer Straße 12 I A-8072 Fernitz-Mellach - AUSTRIA CR: FN350927w I Commercial court: Graz I UID : ATU65936017 T. +43 (0) 5 94604-00 I E. [email protected] I www.ses-imagotag.com U.S. Agent for Service of Process, § 2.911(d)(7) Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 February 8, 2023 To whom it may concern, As required by section US Code Title 47 § 2.911(d)(7), the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. We, SES-Imagotag Inc. accept the obligation to act as U.S. agent for service of process on behalf of the applicant. Adress: SES-Imagotag Inc. 625 N. Michigan Ave., Suite 650 Chicago, IL 60611 United States Email: [email protected] We, SES-imagotag GmbH consent to SES-Imagotag Inc. acting as our U.S. agent for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. DocuSign Envelope ID: EE0D6C40-A92A-4B65-B3CB-00B6AA0288EB SES-imagotag GmbH I Kalsdorfer Straße 12 I A-8072 Fernitz-Mellach - AUSTRIA CR: FN350927w I Commercial court: Graz I UID : ATU65936017 T. +43 (0) 5 94604-00 I E. [email protected] I www.ses-imagotag.com Sincerely, The U.S. Agent for Service of Process: Philippe Bottine (CEO) Signature (can be electronically inserted) SES-Imagotag Inc. 625 N. Michigan Ave., Suite 650 Chicago, IL 60611 United States The Applicant for Equipment Authorization: Philipp Jauck Signature (can be electronically inserted) Head of IP Management & Regulatory Compliance SES-imagotag GmbH Kalsdorfer Strasse 12 8072 Fernitz-Mellach Austria DocuSign Envelope ID: EE0D6C40-A92A-4B65-B3CB-00B6AA0288EB

Coverletter: SES-Imagotag GmbH wants to get FCC-Certification for the following device: EDB1-0160-A. The unit will get the following FCC-ID: 2ACQM-EDB1-0160-A List of documents: Exhibit Thema File Exhibit 01 Label and placement label_and_placement.pdf Exhibit 02 Applicant Authorization Covered List US Agent for Service of Process FCC Authorization Letter - EDB1-0160-A.pdf TÜV_Covered_List_FCC_IC_20230201_signed.pdf TÜV_US Agent for Service of Process_20230208_2x_signed.pdf ° Exhibit 03 External Photos photos_external.pdf * Exhibit 04 Block Diagrams BTRTx001B00B_BlockDiagram_v1.1.pdf * Exhibit 05 Schematic Diagrams BTRTx001B00B_Schematics_v1.1.pdf Exhibit 06 Testreport 2023-IN-AT-TICL-E-EX-000018-FG- 005_noPhotos.pdf ° Exhibit 07 Test Set-up Photos photos_setup.pdf ° Exhibit 08 User Manual VUSION Bluetooth LE Certification_manual_EN_20230417.pdf ° Exhibit 09 Internal Photos photos_internal.pdf Exhibit 10 Part 15 Antenna information see internal photos see test report Exhibit 11 RF exposure see test report * Exhibit 12 Operational Description Operational Description VUSION BLE_20230417.pdf Exhibit 13 Cover letter Request for confidentiality This file Long Term - Short Term Confidentiality Request_FCC_EDB1-0740- A_20230306_signed.pdf For the Exhibits marked with ‘*’ SES-imagotag GmbH requested Long-Term Confidentiality and for exhibits marked with ‘°’ SES-imagotag GmbH requested Short-Term Confidentiality according to 47 CFR 0.457 and 0.459 of the FCC rules because these are sensitive parts owned by this company and include much of know-how or sensitive data, it will not be provided to the public. Regarding Part 15 antenna information: The device has an on-board inverted-F antenna (IFA). The antenna is shown in the internal photo exhibit. Measured antenna gain is given in the test report. The labelling on some photos may be not the actual status. The correct labelling is shown on the label photo in Exhibit 1.

Page 1/1 CONFIDENTIALITY REQUEST Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 March 6 th 2023, Fernitz TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, SES-imagotag GmbH (FRN: 0023782022) requests confidentiality for the following products: FCC ID Number Product: Title/Model o Product Code: EDB1-0160-A/ FCC: 2ACQM-EDB1-0160-A For the product stated above, we request that the following information be held Long-Term confidential: 1. Circuit diagrams, BOM, and PCBs submitted as Equipment Authorization Electronic Filing attachment: “folder: Hardware” 2. Block diagram, Operational description submitted as Equipment Authorization For the product stated above, we request that the following information be held Short-Term confidential: 1. External photos 2. Test setup photos 3. Internal photos 4. User ́manual The above exhibits contain SES-imagotag GmbH trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our Smart Tagging System. This material is not customarily available to the general public and we request that it be withheld from public inspection. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Philipp Jauck, Head of IP Management & Regulatory Compliance SES-imagotag GmbH Kalsdorfer Strasse 12 8072 Fernitz-Mellach, Austria Mobil: +43 664 88252901 [email protected] www.ses-imagotag.com

www.tuv.at | [email protected] | T‹V Æ DN- FM-INE-EMV-ALL-Anl2_en Rev00 Appendix 2 Photodocumentation Description: Top view Division: Industry & Energy Test report reference: 2023-IN-AT-TICL-E-EX- 000018-FG-005 Page: 1 of 10 Date: 14.04.2023 www.tuv.at | [email protected] | T‹V Æ DN- FM-INE-EMV-ALL-Anl2_en Rev00 Appendix 2 Photodocumentation Description: Bottom view Division: Industry & Energy Test report reference: 2023-IN-AT-TICL-E-EX- 000018-FG-005 Page: 2 of 10 Date: 14.04.2023

www.tuv.at | [email protected] | T‹V Æ DN- FM-INE-EMV-ALL-Anl2_en Rev00 Appendix 2 Photodocumentation Description: Battery compartment opened Division: Industry & Energy Test report reference: 2023-IN-AT-TICL-E-EX- 000018-FG-005 Page: 3 of 10 Date: 14.04.2023 www.tuv.at | [email protected] | T‹V Æ DN- FM-INE-EMV-ALL-Anl2_en Rev00 Appendix 2 Photodocumentation Description: Case opened Division: Industry & Energy Test report reference: 2023-IN-AT-TICL-E-EX- 000018-FG-005 Page: 4 of 10 Date: 14.04.2023 www.tuv.at | [email protected] | T‹V Æ DN- FM-INE-EMV-ALL-Anl2_en Rev00 Appendix 2 Photodocumentation Description: Internal view #1 Division: Industry & Energy Test report reference: 2023-IN-AT-TICL-E-EX- 000018-FG-005 Page: 5 of 10 Date: 14.04.2023 www.tuv.at | [email protected] | T‹V Æ DN- FM-INE-EMV-ALL-Anl2_en Rev00 Appendix 2 Photodocumentation Description: Internal view #2 Division: Industry & Energy Test report reference: 2023-IN-AT-TICL-E-EX- 000018-FG-005 Page: 6 of 10 Date: 14.04.2023 www.tuv.at | [email protected] | T‹V Æ DN- FM-INE-EMV-ALL-Anl2_en Rev00 Appendix 2 Photodocumentation Description: Internal view #3 Division: Industry & Energy Test report reference: 2023-IN-AT-TICL-E-EX- 000018-FG-005 Page: 7 of 10 Date: 14.04.2023

www.tuv.at | [email protected] | T‹V Æ DN: FM-INE-EMV-EMC-0100a_en Page 1 of 26 2023-IN-AT-TICL-E-EX-000018-FG-005.docx Rev04 TEST REPORT of the accredited test laboratory T‹V Nr.: 2023-IN-AT-TICL-E-EX-000018-FG-005 T‹V AUSTRIA SERVICES GMBH Test laboratory for EMC Ing. Andreas Malek examined by / Testing Laboratory T‹V AUSTRIA SERVICES GMBH Official seal 14.04.2023 Ing. Michael Emminger approved by / Testing Laboratory T‹V AUSTRIA SERVICES GMBH A publication of this test report is only permitted literally. Copying or reproduction of partial sections needs a written permission of T‹V AUSTRIA SERVICES GMBH. The results of this test report only refer to the provided equipment. Applicant: SES-imagotag GmbH Kalsdorfer Strasse 12 A 3 8072 Fernitz-Mellach Tested Product: Electronic shelf labelling system Product Name: VUSION 1.6 Model: EDB1-0160-A FCC ID: 2ACQM-EDB1-0160-A IC ID: 12154A-EDB10160A Manufacturer: SES-imagotag GmbH Kalsdorfer Strasse 12 A 3 8072 Fernitz-Mellach Output power 3,45 mW eirp power supply: 3 VDC via Battery Frequency range: 2402 - 2480 MHz Channel separation: 2 MHz Accredited Standards: FCC: 47 CFR Part 15 (eCFR 28.02.2023) RSS-102 Issue 5, March 2015 + Amd. 1 02.02.2021 RSS-247 Issue 2, February 2017 ANSI C63.10-2013 T‹V AUSTRIA SERVICES GMBH Office: Deutschstrasse 10 1230 Vienna/Austria T: +43 5 0454-5100 F: +43 5 0454-6505 E: [email protected] W: www.tuv.at Business Area Industry & Energy Austria Technik T‹V Æ Testing Laboratory, Inspection Body, Certification Body, Calibration Laboratory, Verifizierungsstelle Notified Body 0408 Non-executive Board of Directors: KR DI Johann Marihart Management: DI Dr. Stefan Haas Mag. Christoph Wenninger Registered Office: Deutschstrasse 10 1230 Vienna/Austria Branch Offices: www.tuv.at/standorte Company Register Court / - Number: Vienna / FN 288476 f Bank Details: IBAN AT131200052949001066 BIC BKAUATWW VAT ATU63240488 DVR 3002476 www.tuv.at | [email protected] | T‹V Æ Test report number: 2023-IN-AT-TICL-E-EX-000018-FG-005 Date: 14.04.2023 Ambient temperature: 23∞C Relative humidity: 20% DN: FM-INE-EMV-EMC-0100a_en Page 2 of 26 2023-IN-AT-TICL-E-EX-000018-FG-005.docx Rev04 Contents Designation PAGE 1. Applicant 3 2. Description of EUT 4 3. Standards / Final result 5 4. Test results List of measurements according to 47 CFR 15 and RSS-247 4.1 Test object data 6 4.2 Number of channels and channel spacing 7 4.3 6 dB Bandwidth 8 3 10 4.4 99% dB Bandwidth 11 3 13 4.5 Maximum Peak RF Power Output 14 4.6 Power Spectral Density 15 3 17 4.7 Emissions in restricted bands 18 3 22 4.8 RF Exposure 23 3 26 Appendix Designation PAGES 1 Test equipment used 5 2 Photodocumentation 10 www.tuv.at | [email protected] | T‹V Æ Test report number: 2023-IN-AT-TICL-E-EX-000018-FG-005 Date: 14.04.2023 Ambient temperature: 23∞C Relative humidity: 20% DN: FM-INE-EMV-EMC-0100a_en Page 3 of 26 2023-IN-AT-TICL-E-EX-000018-FG-005.docx Rev04 1. Applicant Company: SES-imagotag GmbH Department: Product & Project Manager Address: A 3 8072 Fernitz-Mellach; Kalsdorfer Strasse 12 Contact person: Mrs. Tamara Risek Gmajnic EUT received on: 28.02.2022 Tests were performed on: 28.02. till 03.03.2023 www.tuv.at | [email protected] | T‹V Æ Test report number: 2023-IN-AT-TICL-E-EX-000018-FG-005 Date: 14.04.2023 Ambient temperature: 23∞C Relative humidity: 20% DN: FM-INE-EMV-EMC-0100a_en Page 4 of 26 2023-IN-AT-TICL-E-EX-000018-FG-005.docx Rev04 2. Description of EUT EUT: Electronic shelf labelling system Product Name: VUSION 1.6 Model: EDB1-0160-A Serial Number: prototype Manufacturer: SES-imagotag GmbH Description: SES-imagotag GmbH provided the following configuration for the measurements: Prototype with special firmware for continuous transmission Operating mode: The measurements were carried out at the following running states: test-firmware running, transmitting continuously Technical data EUT: Rated voltage: 3VDC Rated frequency: DC Mains voltage during the tests: 3VDC Climatic conditions in the emc laboratory: Relative humidity: 20% Temperature: 23∞C www.tuv.at | [email protected] | T‹V Æ Test report number: 2023-IN-AT-TICL-E-EX-000018-FG-005 Date: 14.04.2023 Ambient temperature: 23∞C Relative humidity: 20% DN: FM-INE-EMV-EMC-0100a_en Page 5 of 26 2023-IN-AT-TICL-E-EX-000018-FG-005.docx Rev04 3. Standards / Final result Name Title Deviation Result FCC: 47 CFR Part 15 (eCFR 28.02.2023) RADIO FREQUENCY DEVICES none OK RSS-247 Issue 2, February 2017 Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence-Exempt Local Area Network (LE-LAN) Devices none OK RSS-102 Issue 5, March 2015 + Amd. 1 02.02.2021 Radio Frequency (RF) Exposure Compliance of Radiocommunication Apparatus (All Frequency Bands) none OK ANSI C63.10-2013 American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices none OK Result: Opinions and interpretation of testing laboratory OK: EUT passed NOK: EUT failed www.tuv.at | [email protected] | T‹V Æ Test report number: 2023-IN-AT-TICL-E-EX-000018-FG-005 Date: 14.04.2023 Ambient temperature: 23∞C Relative humidity: 20% DN: FM-INE-EMV-EMC-0100a_en Page 6 of 26 2023-IN-AT-TICL-E-EX-000018-FG-005.docx Rev04 4. TEST RESULTS 4.1. TEST OBJECT DATA General EUT Description 2.1033 (c) Technical description 2.1033 (4) Type of emission: 1M04F1D 3 Channel spacing 2 MHz 2.1033 (5) Frequency range: 2402 to 2480 MHz (channel center frequencies). 2.1033 (6) Power range and Controls: The maximum peak output power is 3,45 mW and there is no power regulation. 2.1033 (7) Maximum output power rating: 3,45 mW. 2.1033 (8) DC Voltage and Current: 3V DC RSS-135 This standard does not apply to: 1.1.(a) a receiver that scans radio frequencies for the purpose of enabling its associated transmitter to avoid transmitting in an occupied frequency but which does not have the capability of decoding the message (e.g. converting it to audio voice) contained in the radio signal Worst case Spurious Emissions: 48,32 dBμV/m Average at 4804,0 MHz. Tests were performed February 28 th…

Text truncated - open the document above for the full version.

www.tuv.at | [email protected] | T‹V Æ DN- FM-INE-EMV-ALL-Anl2_en Rev00 Appendix 2 Photodocumentation Description: Test setup below 30 MHz Division: Industry & Energy Test report reference: 2023-IN-AT-TICL-E-EX- 000018-FG-005 Page: 8 of 10 Date: 14.04.2023 www.tuv.at | [email protected] | T‹V Æ DN- FM-INE-EMV-ALL-Anl2_en Rev00 Appendix 2 Photodocumentation Description: Test setup 30 MHz - 1 GHz Division: Industry & Energy Test report reference: 2023-IN-AT-TICL-E-EX- 000018-FG-005 Page: 9 of 10 Date: 14.04.2023 www.tuv.at | [email protected] | T‹V Æ DN- FM-INE-EMV-ALL-Anl2_en Rev00 Appendix 2 Photodocumentation Description: Test setup above 1 GHz Division: Industry & Energy Test report reference: 2023-IN-AT-TICL-E-EX- 000018-FG-005 Page: 10 of 10 Date: 14.04.2023 --- END OF TEST REPORT ---