2ACSV-HF-SH01WiFi Module

High-Flying Electronics Technology Co., Ltd.

Click to zoom

Application Details

Equipment Class: DTS - Digital Transmission System
Date of Grant: May 03, 2015
Application Purpose: Original Equipment
Date of Application: May 03, 2015
Equipment Note: WiFi Module
Frequency Range: 2412.00000000 - 2462.00000000
Company: High-Flying Electronics Technology Co., Ltd.
Country: China

Documents & Files

Select a file to view

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

FCC INFORMATION (additional): Limited Channels fixed for use in the US: IEEE 802.11b or 802.11g or 802.11n(HT20) operation of this product in the U.S. is firmware-limited to Channel 1 through 11. OEM INTEGRATION INSTRUCTIONS: This device is intended only for OEM integrators under the following conditions: The antenna must be installed such that 20 cm is maintained between the antenna and users. The transmitter module may not be co-located with any other transmitter or antenna. The module shall be only used with the internal PCB antenna that has been originally tested and certified with this module. As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example radiated host+module emissions, digital device emissions, PC peripheral requirements, etc.). Validity of using the module certification: In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization for this module in combination with the host equipment is no longer considered valid and the FCC ID of the module cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End product labeling: The final end product must be labeled in a visible area with the following: “Contains FCC ID: 2ACSV-HF-SH01”. Information that must be placed in the end user manual: The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user's manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual.

Users Manual

High-Flying Low Power WiFi Module User Manual Shanghai High-Flying Electronics Technology Co., Ltd www.hi-flying.com - 1 - Low Power WiFi Module User Manual V 1.3 Overview of Characteristic Support IEEE802.11b/g/n Wireless Standards Based on Self-developed High Cost Effective MCU Ultra-Low-Power for Battery Applications with Excellent Power Save Scheme Support UART/SPI/PWM/GPIO Data Communication Interface Support Work As STA/AP/AP+STA Mode Support Smart Link Function (APP program provide) Support Wireless and Remote Firmware Upgrade Function Support WPS Function Support Multi-TCP Link (5 Channel) Apllication Support Soft Key Power Control Support Internal/External Antenna Option Single +3.3V Power Supply Smallest Size: 23.1mm x 32.8mm x2.7mm FCC/CE Certificated HF-SH01 HF-SH01 High-Flying Low Power WiFi Module User Manual Shanghai High-Flying Electronics Technology Co., Ltd www.hi-flying.com - 2 - TABLE OF CONTENTS LIST OF FIGURES .............................................................................................................................6 LIST OF TABLES...............................................................................................................................7 HISTORY............................................................................................................................................8 1.PRODUCT OVERVIEW ...........................................................................................................9 1.1.General Description ............................................................................................................9 1.1.1Device Features.............................................................................................................9 1.1.2Device Paremeters....................................................................................................... 10 1.1.3Key Application ............................................................................................................ 10 1.2.Hardware Introduction ......................................................................................................11 1.2.1.Pins Definition .............................................................................................................. 11 1.2.2.Electrical Characteristics .............................................................................................. 13 1.2.3.Mechanical Size........................................................................................................... 14 1.2.4.On-board Chip Antenna ............................................................................................... 14 1.2.5.External Antenna ......................................................................................................... 15 1.2.6.Evaluation Kit............................................................................................................... 15 1.2.7.Order Information ......................................................................................................... 17 1.3.Typical Application ........................................................................................................... 18 1.3.1.Hardware Typical Application ....................................................................................... 18 2.FUNCTIONAL DESCRIPTION .............................................................................................. 20 2.1.Wireless Networking......................................................................................................... 20 2.1.1.Basic Wireless Network Based On AP (Infrastructure) .................................................. 20 2.1.2.Wireless Network Based On AP+STA .......................................................................... 20 2.2.Work Mode : Transparent Transmission Mode................................................................ 21 2.3.UART Frame Scheme........................................................................................................ 22 2.3.1.UART Free-Frame ....................................................................................................... 22 2.3.2.UART Auto-Frame ....................................................................................................... 22 2.4.Encryption......................................................................................................................... 23 2.5.Power Save Scheme ......................................................................................................... 23 2.6.Parameters Configuration ................................................................................................ 24 2.7.Firmware Update............................................................................................................... 24 2.8.GPIO/PWM Function ......................................................................................................... 25 2.9.SOCKET B Function ......................................................................................................... 26 2.10.Multi-TCP Link Connection ........................................................................................... 26 3.OPERATION GUIDELINE .....................................................................................................28 3.1.Configuration via Web Accessing.................................................................................... 28 3.1.1.Open Web Management Interface................................................................................ 28 3.1.2.System Page ............................................................................................................... 28 3.1.3.Work Mode Page ......................................................................................................... 29 3.1.4.STA Setting Page..........................................................................................…

Text truncated - open the document above for the full version.

External Photos

Figure1 TheEUT-FrontView Figure2 TheEUT-BackView EUTisplaced onthehost Figure3 TheEUT-FrontView EUT

ID Label/Location Info

LabelLocationOnEUT

ID Label/Location Info

ProductName:EmbeddedWi-FiModule ModelNo.:HF-SH01 FCCID:2ACSV-HF-SH01

Internal Photos

Figure 4 The EUT-Inside View Figure 5 The EUT-Inside View PCB meander antenna

RF Exposure Info

RFEXPOSUREEVALUATION AccordingtoFCC1.1310:Thecriterialistedinthefollowingtableshallbeusedto evaluatetheenvironmentimpactofhumanexposuretoradiofrequency(RF)Radiation asspecifiedin§1.1307(b) FCCID ： 2ACSV-HF-SH01 EUTSpecification EUTSPORTDVR Frequencyband(Operating)WLAN:2.412GHz~2.462GHz WLAN:5.18GHz~5.32GHz/5.50GHz~5.70GHz WLAN:5.745GHz~5825GHz Others DevicecategoryPortable(<20cmseparation) Mobile(>20cmseparation) Others___ ExposureclassificationOccupational/Controlledexposure(S=5mW/cm2) GeneralPopulation/Uncontrolledexposure(S=1mW/cm2) AntennadiversitySingleantenna Multipleantennas Txdiversity Rxdiversity Tx/Rxdiversity Max.outputpower15.69dBm(0.037W) Antennagain(Max)2dBi EvaluationappliedMPEEvaluation SAREvaluation LimitsforMaximumPermissibleExposure(MPE) Frequency Range(MHz) ElectricField Strength(V/m) MagneticField Strength(A/m) Power Density(mW/cm 2 ) Average Time (A)LimitsforOccupational/ControlExposures 300-1500----F/3006 1500-100000----56 (B)LimitsforGeneralPopulation/UncontrolExposures 300-1500----F/15006 1500-100000----130 Friistransmissionformula:Pd=(Pout*G)\(4*pi*R2) Where Pd=PowerdensityinmW/cm 2 Pout=outputpowertoantennainMw G=gainofantennainlinearscale Pi=3.1416 R=distancebetweenobservationpointandcenteroftheradiatorincm PdthelimitofMPE,1mW/cm2.Ifweknowthemaximumgainoftheantennaand totalpowerinputtotheantenna,throughthecalculation,wewillknowthedistance wheretheMPElimitisreached. MeasurementResult OperatingModeChannel Frequency (MHz) OutputPeak power(mW) Antenna Gain(dBi) Powerdensityat 20cm(mW/cm 2 ) Powerdensity Limits (mW/cm 2 ) IEEE802.11b 241227.6120.008711 243731.1920.009831 246237.0720.011691 IEEE802.11g 241211.8020.003721 243716.4120.005171 246217.3820.005481 IEEE802.11n (HT20) 241212.5020.003941 243713.8720.004371 246216.6020.005231 EEE802.11n (HT40) 242210.5720.003331 243711.9420.003761 245213.7720.004341

Test Report

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 1 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com FCC TEST REPORT for High-Flying Electronics Technology Co., Ltd. Embedded Wi-Fi Module Model No.: HF-SH01 ReportNumber:R011503376E DateofTest:Mar.18~Apr.08,2015 DateofReport:Apr.09,2015 Preparedfor:High-FlyingElectronicsTechnologyCo.,Ltd. Address: Room 1002, Building 1, No.3000, Longdong Avenue, Pudong NewArea,Shanghai,China,201203 PreparedBy:ShenzhenAnbotekComplianceLaboratoryLimited Address: 1/F., Building 1, SEC Industrial Park, No.0409 Qianhai Road, NanshanDistrict,Shenzhen,Guangdong,China Tel:(86)755-26066544 Fax:(86)755-26014772 Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 2 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com TABLE OF CONTENT Description Page Test Report 1. GENERAL INFORMATION......................................................................................................4 1.1. Description of Device (EUT)................................................................................................................4 1.2. Auxiliary Equipment Used during Test................................................................................................5 1.3. Description of Test Facility.................................................................................................................. 5 1.4. Measurement Uncertainty.....................................................................................................................5 2. TEST METHODOLOGY............................................................................................................6 2.1. Summary of Test Results......................................................................................................................6 2.2. Description of Test Modes....................................................................................................................6 2.3. List of channels:....................................................................................................................................7 3. CONDUCTED EMISSION TEST.............................................................................................. 8 3.1. Block Diagram of Test Setup................................................................................................................8 3.2. Power Line Conducted Emission Measurement Limits (15.207).........................................................8 3.3. Configuration of EUT on Measurement............................................................................................... 8 3.4. Operating Condition of EUT................................................................................................................ 8 3.5. Test Procedure...................................................................................................................................... 9 3.6. Test equipment......................................................................................................................................9 3.7. Power Line Conducted Emission Measurement Results...................................................................... 9 4. FCC PART 15.247 REQUIREMENTS FOR DSSS & OFDM MODULATION................. 12 4.1 Test Setup.............................................................................................................................................12 4.2 6dB Bandwidth.................................................................................................................................... 12 4.3. Maximum Output Power Test.............................................................................................................28 4.4. Band Edges Measurement...................................................................................................................36 4.5. Peak Power Spectral Density..............................................................................................................73 4.6. Radiated Emissions.............................................................................................................................81 5. PHOTOGRAPH......................................................................................................................... 92 5.1. Photo of Conducted Emission Measurement......................................................................................92 5.2. Photo of Radiation Emission Test.......................................................................................................92 APPENDIX I (EXTERNAL PHOTOS)........................................................................................94 APPENDIX II (INTERNAL PHOTOS)...................................................................................... 96 Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 3 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com TEST REPORT Applicant: High-Flying Electronics Technology Co., Ltd. Manufacturer: High-Flying Electronics Technology Co., Ltd. EUT: Embedded Wi-Fi Module Model No.: HF-SH01 Serial No.: N.A. Trade Mark: High-Flying Rating: DC 3.1V-3.6V, 240mA Measurement Procedure Used: FCC Part15 Subpart C, Paragraph 15.247 The device described above is tested by Shenzhen Anbotek Compliance Laboratory Limited to determine the maximum emission levels emanating from the device and the severe levels of the device can endure and its performance criterion. The measurement results are contained in this test report and Shenzhen Anbotek Compliance Laboratory Limited is assumed full of responsibility for the accuracy and completeness of these measurements. Also, this report s…

Text truncated - open the document above for the full version.

Test Report

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 31 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com Test Mode: 802.11b---High Test Mode: 802.11g---Low Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 32 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com Test Mode: 802.11g---Mid Test Mode: 802.11g---High Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 33 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com Test Mode: 802.11n(HT20)---Low Test Mode: 802.11n(HT20)---Mid Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 34 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com Test Mode: 802.11n(HT20)---High Test Mode: 802.11n(HT40)---Low Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 35 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com Test Mode: 802.11n(HT40)---Mid Test Mode: 802.11n(HT40)---High Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 36 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com 4.4. Band Edges Measurement a.Limit According to §15.247(c), in any 100 kHz bandwidth outside the frequency bands in which the spread spectrum intentional radiator in operating, the radio frequency power that is produced by the intentional radiator shall be at least 20dB below that in the 100kHz bandwidth within the band that contains the highest level of the desired power, In addition, radiated emissions which fall in the restricted bands, as defined in §15.205(a), must also comply with the radiated emission limits specified in15.209(a). b.TestProcedure 1. Conducted Method: 1) Set RBW=100KHz, VBW=300KHz 2) Detector=peak 3) Sweep time= auto 4) Trace mode=max hold. 2. Radiated Method: 1) The EUT is placed on a turntable, which is 1.5m above the ground plane. 2) The turntable shall be rotated for 360 degrees to determine the position of maximum emission level. 3) EUT is set 3m away from the receiving antenna, which is varied from 1m to 4m to find out the highest emission. 4) For PK measurement: RBW=1MHz, VBW=3MHz, SWT=AUTO, peak detector For Average measurement: RBW=1MHz, VBW=10Hz, SWT=AUTO, peak detector The EUT is tested in 9*6*6 Chamber. 5) Repeat the procedures until all the PEAK and AVERAGE versus POLARIZATION are measured. c.TestEquipment Same as the equipment listed in 4.2. d.TestResults Pass. e.TestPlots See the following page. Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 37 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com Test Mode: 802.11b ---Low Test Mode: 802.11b ---High Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 38 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com Test Mode: 802.11g ---Low Test Mode: 802.11g ---High Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 39 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com Test Mode: 802.11n (HT20) ---Low Test Mode: 802.11n (HT20)---High Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 40 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com Test Mode: 802.11n (HT40) ---Low Test Mode: 802.11n (HT40) ---High Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 41 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com Test Mode: 802.11b 2412MHz Horizontal-PEAK: Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 42 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com Horizontal-AV: Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 43 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com Test Mode: 802.11b 2412MHz Vertical-PEAK: Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 44 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com Vertical-AV: Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 45 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com Test Mode: 802.11b 2462MHz Horizontal-PEAK: Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 46 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com Horizontal-AV: Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 47 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com Test Mode: 802.11b 2462MHz Vertical-PEAK: Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 48 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com Vertical-AV: Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 49 of 96 Report No.: R011503376E …

Text truncated - open the document above for the full version.

Test Report

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 61 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com Test Mode: 802.11n (HT20) 2462MHz Horizontal-PEAK: Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 62 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com Horizontal-AV: Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 63 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com Test Mode: 802.11n (HT20) 2462MHz Vertical-PEAK: Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 64 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com Vertical-AV: Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 65 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com Test Mode: 802.11n (HT40) 2422MHz Horizontal-PEAK: Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 66 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com Horizontal-AV: Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 67 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com Test Mode: 802.11n (HT40) 2422MHz Vertical-PEAK: Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 68 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com Vertical-AV: Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 69 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com Test Mode: 802.11n (HT40) 2452MHz Horizontal-PEAK: Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 70 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com Horizontal-AV: Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 71 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com Test Mode: 802.11n (HT40) 2452MHz Vertical-PEAK: Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 72 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com Vertical-AV: Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 73 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com 4.5. Peak Power Spectral Density a. Limit 1. For direct sequence systems, the peak power spectral density conducted from the intentional radiator to the antenna shall not be greater than 8dBm in any 3kHz band during any time interval of continuous transmission. 2. The direct sequence operating of the hybrid system, with the frequency hopping operation turned off, shall comply with the power density requirements of paragraph (d) of this section. b. Test Procedure 1. Place the EUT on the table and set it in transmitting mode. Remove the antenna from the EUT and then connect a low loss RF cable from the antenna port to the spectrum analyzer. 2. Set the spectrum analyzer as RBW = 3kHz, VBW = 10kHz, Span = 1.5 times DTS BW, Sweep=500s 3. Record the max. reading. 4. Repeat the above procedure until the measurements for all frequencies are completed. c. Test Equipment Same as the equipment listed in 4.2. d. Test Setup See 4.1 e. Test Results Pass f. Test Data Please refer to the following data. g. Test Plot See the following pages Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 74 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com Test mode: IEEE 802.11b Channel Frequency (MHz) PPSD (dBm/3KHz) ∑PPSD (dBm/3KHz) Limit (dBm) Result Low2412-17.52- 8.00 Pass Mid2437-18.47-Pass High2462-19.35-Pass Test mode: IEEE 802.11g Channel Frequency (MHz) PPSD (dBm) ∑PPSD (dBm) Limit (dBm) Result Low2412-21.10- 8.00 Pass Mid2437-21.92-Pass High2462-22.72-Pass Test mode: IEEE 802.11n (HT20) Channel Frequency (MHz) PPSD (dBm/3KHz) ∑PPSD (dBm/3KHz) Limit (dBm) Result Low2412-20.46- 8.00 Pass Mid2437-22.12-Pass High2462-23.05-Pass Test mode: IEEE 802.11n (HT40) Channel Frequency (MHz) PPSD (dBm/3KHz) ∑PPSD (dBm/3KHz) Limit (dBm) Result Low2422-21.70- 8.00 Pass Mid2437-21.81-Pass High2452-22.68-Pass Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 75 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com 802.11 b CH--Low 802.11 b CH--Mid Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 76 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com 802.11 b CH--High 802.11g CH--Low Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 77 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com 802.11g CH--Mid 802.11g CH--High Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 78 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com 802.11n (HT20) CH—Low 802.11n (HT20…

Text truncated - open the document above for the full version.

Test Report

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 91 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com Job No.:011503376EPolarization:Vertical Standard:(RE)FCC PART15 C _3mPower Source:AC 120V/60Hz for adapter Test item:Radiation TestTemp.(C)/Hum.(%RH): 24.3(C)/55%RH Note:802.11b(2462MHz)Distance:3m Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 92 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com 5. PHOTOGRAPH 5.1. Photo of Conducted Emission Measurement 5.2. Photo of Radiation Emission Test Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 93 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 94 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com APPENDIX I (EXTERNAL PHOTOS) Figure 1 The EUT-Front View Figure 2 The EUT-Back View EUT is placed on the host Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 95 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com Figure 3 The EUT-Front View EUT Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2ACSV-HF-SH01 Page 96 of 96 Report No.: R011503376E Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066544Fax:(86)755-26014772www.anbotek.com APPENDIX II (INTERNAL PHOTOS) Figure 4 The EUT-Inside View Figure 5 The EUT-Inside View

Test Setup Photos

1.PhotoofConductedEmissionMeasurement 2.PhotoofRadiationEmissionTest

Contact Information

Applicant

Sen Xie(General Manager)

[email protected]400-189-3108Fax: 021-31291158-8089

Technical Contact

TeleconformityMark Koop

[email protected](31)848395876

Rietven 31 · Enschede, Overyssel · Netherlands

Test Firm

Shenzhen Anbotek Compliance Laboratory LimitedDaniel zhu

[email protected]86-755-26014771

Technical Specifications

#	Rule Parts	Frequency Range	Power Output
1	15C	2.41 GHz - 2.46 GHz	37.00 mW

Modular Type

Single Modular Approval

Confidentiality

Long Term

Grant Notes

Full Modular Approval (FMA) restricted to RF Category 'Mobile' host products. Power Output listed is Conducted. This grant is valid only when the device is supplied to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter approval procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.