
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
www.makeblock.cc FCC Information 2770247 Makeblock Inventor's Electronic Kit http://www.makeblock.cc This product is warranted against defects in materials and workmanship under normal use by the original purchaser for 90 days after the date of purchase from an authorized retailer. THERE ARE NO OTHER EXPRESS WARRANTIES. This warranty does not cover: (a) damage or failure caused by or attributable to abuse, misuse, failure to follow instructions, improper installation or maintenance, alteration, accident, Acts of God (such as floods or lightning), or excess voltage or current; (b) improper or incorrectly performed repairs by non-authorized service facilities; (c) consumables such as fuses or batteries; (d) ordinary wear and tear or cosmetic damage; (e) transportation, shipping or insurance costs; (f) costs of product removal, installation, set-up service, adjustment or reinstallation; and (g) claims by persons other than the original purchaser. Should a problem occur that is covered by this warranty, take the product and the original sales receipt as proof of purchase date to the place of purchase. The product, at the warrantor's option, unless otherwise provided by law: (a) be repaired without charge for parts and labor; (b) be replaced with the same or a comparable product; or (c) a refund of the purchase price will be provided. All replaced parts and products, and products on which a refund is made, become the property of the warrantor. New or reconditioned parts and products may be used in the performance of warranty service. Repaired or replaced parts and products are warranted for the remainder of the original warranty period. You will be charged for repair or replacement of the product made after the expiration of the warranty period. ALL IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND, IF APPLICABLE, THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, SHALL EXPIRE ON THE EXPIRATION OF THE STATED WARRANTY PERIOD. EXCEPT AS DESCRIBED ABOVE, THE WARRANTOR SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OF THE PRODUCT OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE AND ANY LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT AND ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF THE WARRANTOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. You may contact the warrantor at: [email protected] Limited Warranty Product Model Responsible Party Phone 94004 Company Name:MAKER WORKS TECHNOLOGY INC Address:385 S. LEMON AVE., #E276 WALNUT, CA 91789,USA 323-908-8554 Makeblock Inventor's Electronic Kit This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. ZHowever,there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ·Reorient or relocate the receiving antenna. ·Increase the separation between the equipment and receiver. ·Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ·Consult the dealer or an experienced radio/TV technician for help. If you cannot eliminate the interference, the FCC requires that you stop using your product. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
55 44 33 22 11 D D C C B B A A BCM20710(Single-Chip Bluetooth Transceiver and Baseband Processor) Print Antenna 26MHz Crystal UART UARTSPII2CGPIOs 12MHz Crystal 32.768KHz Crystal 32.768KHz clock GPIOs MCU ARM Cortex -M032-BIT MICROCONTROLLER TitleSize Document Number Rev Date: Sheet of <Doc> <RevCode> <Title> A 1 1 Wednesday, August 20, 2014 TitleSize Document Number Rev Date: Sheet of <Doc> <RevCode> <Title> A 1 1 Wednesday, August 20, 2014 TitleSize Document Number Rev Date: Sheet of <Doc> <RevCode> <Title> A 1 1 Wednesday, August 20, 2014
HULU ROBOTICDS TECHNOLOGY COMPANY LIMITED 21 Aug 2014 Equipment Authorization Division Office id Engineering and Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Dear Sirs: HULU ROBOTICDS TECHNOLOGY COMPANY LIMITED requests acceptance of the labeling proposal described below for Makeblock Bluetooth Module bearing FCC identifier 2ACWW13002. The subject Makeblock Bluetooth Module models as shown in figure 1, authorized under FCC Part 15 Class C figure 1 HULU ROBOTICDS TECHNOLOGY COMPANY LIMITED It is because the surface of the device does not enough to indicate the FCC statement. For this reason, HULU ROBOTICDS TECHNOLOGY COMPANY LIMITED proposes those statements is showing on the user manual and the device is carrying the FCC ID number only. The figure2 is showing the FCC ID location. figure 2 Sincerely, HULU ROBOTICDS TECHNOLOGY COMPANY LIMITED Tony Chen Manager
HULU ROBOTICDS TECHNOLOGY COMPANY LIMITED FCC ID: 2ACWW13002 POWER OF ATTORNEY 09/August, 2014 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern: We, the undersigned, hereby authorize CMA Industrial Development Foundations Limited (Andrew Wong) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by CMA Industrial Development Foundation Limited (Andrew Wong) on our behalf shall have the same effect as acts of our own. This authorization expires one year from original date. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, (HULU ROBOTICS TECHNOLOGY COMPANY LIMITED), are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Tony Chen
External Photo
Label Sample
Internal Photo
Brief description of the functions Me Bluetooth(Dual Mode)is designed to communicate with devices with Bluetooth function through specific software. It is compatible with Bluetooth 2.0 and 4.0, provides a simple way to communicate with other Bluetooth device(such as smart phones). The Bluetooth module provides TTL level UART interface. It acts like a normal UART module in an embedded system(such as Arduino), communicating with other Bluetooth device is as easy as operating a serial port. The ELET114A Bluetooth Dual-Mode Module is integrated MCU (ARM Cortex-M0 32-BIT MICROCONTROLLER) and Bluetooth radio device, follow BT2.1+EDR/3.0/4.0(BLE) specification, support SPP protocol and so on. It supports UART, SPI, I2C, interfaces, contains four PWM ports, channels and several GPIOs, with high integration, low cost, low power consumption, and excellent Radio performance. It achieves the perfect compatibility of iOS(MAC), Android and other operating system.
1 1 2 2 3 3 4 4 DD CC BB AA Title: Date:Time:2014/6/2712:23:51 Me Bluetooth Module(Dual Mode) www.makeblock.cc SCL 1 SDA 2 VCC 4 S1 5 S2 6 GND 3 J1 RJ25-B 1 2 3 4 P1 Header 4 D1 SS34 PWR LED_Red S1 SW-PB V S S 1 VOUT 2 VIN 3 U1 XC6206 GND C1 0.1uF C2 10uF GND 3V3 RX TX GND 3V3 STA LED_Blue GND C3 0.1uF GND 3V3 UART_TX UART_RX VCC TX RX UART_TX UART_RX logo logo1 makeblock 1 H1 hole GND 8 1 RN1A 10k 7 2 RN1B 10k 6 3 RN1C 10k 5 4 RN1D 10k 3V3VCC VCC3V3 R1 2.2K R3 10k R2 10k R4 2.2k UART_TX 1 UART_RX 2 UART_CTS 3 UART_RTS 4 AIO1 5 AIO2 6 AIO3 7 AIO4 8 ICE_DATA 9 ICE_CLK 10 RESET 11 3.3V 12 GND 13 A O 5 1 4 A O 6 1 5 A O 7 1 6 A O 8 1 7 A O 9 1 8 A O 1 0 1 9 A O 1 1 2 0 G N D 2 1 GND 22 PIO(0) 23 PIO(1) 24 PIO(2) 25 PIO(3) 26 PIO(4) 27 PIO(5) 28 PIO(6) 29 PIO(7) 30 PIO(8) 31 PIO(9) 32 PIO(10) 33 PIO(11) 34 U2 dule_bluetooth 3 1 2 Q1 3 1 2 Q2 DTR DTR PIC101 PIC102 COC1 PIC201 PIC202 COC2 PIC301 PIC302 COC3 PID101PID102 COD1 PIH101 COH1 PIJ101 PIJ102 PIJ103 PIJ104 PIJ105 PIJ106 COJ1 COlogo1 PIP101 PIP102 PIP103 PIP104 COP1 PIPWR01 PIPWR02 COPWR PIQ101 PIQ102PIQ103 COQ1 PIQ201 PIQ202PIQ203 COQ2 PIR101 PIR102 COR1 PIR201 PIR202 COR2 PIR301 PIR302 COR3 PIR401PIR402 COR4 PIRN101 PIRN108 CORN1A PIRN102 PIRN107 CORN1B PIRN103 PIRN106 CORN1C PIRN104 PIRN105 CORN1D PIS101PIS102 COS1 PISTA01PISTA02 COSTA PIU101 PIU102PIU103 COU1 PIU201 PIU202 PIU203 PIU204 PIU205 PIU206 PIU207 PIU208 PIU209 PIU2010 PIU2011 PIU2012 PIU2013 PIU2014PIU2015PIU2016PIU2017PIU2018PIU2019PIU2020PIU2021 PIU2022 PIU2023 PIU2024 PIU2025 PIU2026 PIU2027 PIU2028 PIU2029 PIU2030 PIU2031 PIU2032 PIU2033 PIU2034 COU2
55 44 33 22 11 D D C C B B A A NOTES:1. VDD=VDDIO=3.3V ICE_DATAICE_CLKICE_RSTVDD GNDVDDICE_RSTICE_CLKICE_DATA HOST_WAKEI2C1SCL/PA.11I2C0SCL/PA.9I2C1SDA/PA.10I2C0SDA/PA.8TX1/PB.5RX1/PB.4RTS1/PB.6CTS1/PB.7 PA.4/ADC4PA.2/ADC2PA.3/ADC3PA.1/ADC1PA.0/ADC0ICE_CLKPA.12/PWM0ICE_DATAPA.13/PWM1 PA.15/PWM3/I2SMCLK PA.14/PWM2 PB.1/TX0 PB.2/RTS0 PB.0/RX0 BT_WAKE BT_RST PB.3/CTS0 PC.3/MOSI00/I2SDO PC.1/SPICLK0/I2SBCLK PC.0/SPISS00/I2SLRCLK PC.2/MISO00/I2SDI ADC5/PA.5 CPN0/PC.7 CPP0/PC.6 CPP1/PC.14 CPN1/PC.15 INT1/PB.15 ADC7/PA.7/VREF ICE_RST RTC_32K TX1/PB.5RTS1/PB.6RX1/PB.4CTS1/PB.7 PC.3/MOSI00/I2SDO PC.0/SPISS00/I2SLRCLK PC.1/SPICLK0/I2SBCLK PC.2/MISO00/I2SDI I2C0SCL/PA.9I2C1SCL/PA.11I2C0SDA/PA.8I2C1SDA/PA.10 PA.15/PWM3/I2SMCLK INT1/PB.15PA.13/PWM1PA.12/PWM0PA.0/ADC0PA.2/ADC2PA.1/ADC1 PA.4/ADC4 PA.3/ADC3 CPN0/PC.7 ADC5/PA.5 CPP0/PC.6CPN1/PC.15CPP1/PC.14PA.14/PWM2 BT_RSTHOST_WAKE RTC_32K XINXOUT BT_WAKE PB.1/TX0PB.0/RX0PB.3/CTS0PB.2/RTS0 BT_RF VDD VDD VDD VDD VDD VDD VDD TitleSize Document Number Rev Date: Sheet of WIRELESS <Doc> 1.0 A2 1 1 Sunday , February 16, 2014 TitleSize Document Number Rev Date: Sheet of WIRELESS <Doc> 1.0 A2 1 1 Sunday , February 16, 2014 TitleSize Document Number Rev Date: Sheet of WIRELESS <Doc> 1.0 A2 1 1 Sunday , February 16, 2014 R3100K 21 P3ICE_RST 1 1 C4112pF 12 C36 10pF/0402 C284.7uF/0603 12 C133pF 1 2 U3 BCM20710 REG_EN B5 RST_N C5 SCL E1 SPIM_CS_N E2 LOP_IN B4 XIN F5 XOUT E5 TM2 C6 RES D6 VSS1 D7 VSS2 B6 VSS3 E6 VSS4 F6 VSS5 F3 VSS6 A1 VSS7 B2 UART_RXD D2 UART_TXD C2 UART_RTS_N F2 UART_CTS_N E3 GPIO_6 D5 PCM_OUT E4 GPIO_0/BT_WAKE C3 RFP C7 VBAT A5 VDDO D3 N/C B1 VDDC1 A3 VDDC2 F1 VREG A7 VDDPX F7 VDDRF E7 VDDTF B7 VREGHV A6 ANT1 RF_ANT IN 1 Print Antenna U2 MCU_BT UART_TX 1 UART_RX 2 UART_CTS 3 UART_RTS 4 AIO1 5 AIO2 6 AIO3 7 AIO4 8 ICE_DATA 9 ICE_CLK 10 Reset# 11 VCC 12 GND0 13 AIO5 14 AIO7 16 AIO6 15 AIO8 17 AIO9 18 AIO10 19 AIO11 20 GND1 21 GND2 22 BIO0 23 BIO1 24 BIO2 25 BIO3 26 BIO4 27 BIO5 28 BIO6 29 BIO7 30 BIO8 31 BIO9 32 BIO10 33 BIO11 34 Y 2 32K_MC_146/SSP-T7-F 1 1 2 2 3 3 4 4 R4 750K/0402 R8100K 21 R6 220 OHM 21 C170.1uF 12 C39 10pF 1 2 P4ICE_CLK 1 1 C30 0.01uF/0402 C270.1uF 1 2 R7 15K/1%/0402 R133R 21 C518pF 1 2 C31 0.01uF/0402 P5ICE_DATA 1 1 L1NC/3.9nH J1 RF_Connector IN 1 GND1 2 GND2 3 C41uF/0402 12 C618pF 1 2 C32 0.01uF/0402 C35 1uF/0402 Y 326MHz_3225 1 3 2 4 P1GND 1 1 R21M 2 1 C164.7uF/0603 12 C29 10pF/0402 FB1 Bead/600oHm/0402 1 1 2 2 C30.1uF 12 Y 1 12MHz_3225 13 24 C40 12pF 12 C34 0.01uF/0402 P2VDD 1 1 U1 NUC100_64Pin_7x7 INT0/PB.14 1 CPO1/PB.13 2 CLKO/CPO0/PB.12 3 X32O 4 X32I 5 I2C1SCL/PA.11 6 I2C1SDA/PA.10 7 I2C0SCL/PA.9 8 I2C0SDA/PA.8 9 RX1/PB.4 10 TX1/PB.5 11 RTS1/PB.6 12 CTS1/PB.7 13 LDO 14 VDD1 15 VSS1 16 PB.0/RX0 17 PB.1/TX0 18 PB.2/RTS0 19 PB.3/CTS0 20 PD.6 21 PD.7 22 PD.14/RX2 23 PD.15/TX2 24 PC.3/MOSI00/I2SDO 25 PC.2/MISO00/I2SDI 26 PC.1/SPICLK0/I2SBCLK 27 PC.0/SPISS00/I2SLRCLK 28 PE.5/PWM5 29 PB.11/TM3/PWM4 30 PB.10/TM2 31 PB.9/TM1 32 PC.11/MOSI10 33 PC.10/MISO10 34 PC.9/SPICLK1 35 PC.8/SPISS10 36 PA.15/PWM3/I2SMCLK 37 PA.14/PWM2 38 PA.13/PWM1 39 PA.12/PWM0 40 ICE_DAT 41 ICE_CK 42 AVSS 43 PA.0/ADC0 44 PA.1/ADC1 45 PA.2/ADC2 46 PA.3/ADC3 47 PA.4/ADC4 48 ADC5/PA.5 49 ADC6/PA.6 50 ADC7/PA.7 51 AVDD 52 CPN0/PC.7 53 CPP0/PC.6 54 CPN1/PC.15 55 CPP1/PC.14 56 INT1/PB.15 57 XT1_Out 58 XT1_In 59 /RESET 60 VSS2 61 VDD2 62 PVSS 63 STADC/TM0/PB.8 64 C37 2.2uF/0402 C33 4.7uF/0603 C233pF 1 2 U4 BPF IN 1 GND 2 OUT 3 R5220 OHM 2 1
TEST REPORT Report No. : AS0049260(0) Date : 18 Aug 2014 For and on behalf of CMA Industrial Development Foundation Limited Authorized Signature : Page 1 of 46 Mr. WONG Lap-pong, Andrew Manager Electrical Division FCC ID: 2ACWW13002 Application No. : LS027207(7) Applicant : Hulu Robotics Technology Company Limited Unit A, 3/F, Cheong Sun Tower, 116-118 Wing Lok Street, Sheung Wan, Hong Kong Client : Maker Works Technology Co., Ltd No. 4266, F/4, Gonglehuating Business Building, Xinhu Road, Xixiang Sub-district, Bao’An District, Shenzhen, China Sample Description : One(1) item of submitted sample stated to be Makeblock Bluetooth Module of model No. 13002 applicable only for product Makeblock Starter Robot Kit (Bluetooth Version), Makeblock Ultimate Robot Kit (Bluetooth Version) and Makeblock Inventor Electronic Kit (Bluetooth Version) Product No. : 90020, 90021, 90024, 90025 and 94004 Buyer SKU No. : 2770245 Robot Starter Kit Bluetooth Version, 2770246 Inventor Ultimate Robot Kit, 2770247 Inventor Electronic Kit Sample registration No. : RS033606-001 Radio Frequency : 2402MHz ~ 2480MHz Transceiver Rating : DC 5V Date Received : 08 Aug 2014 Test Period : 08 Aug 2014 to 15 Aug 2014 Test Requested : FCC Part 15 Certificate Test Method : 47 CFR Part 15 (10-1-12 Edition), ANSI C63.4 – 2009, FCC Public Notice DA 00-705 Test Engineer : Mr. LEUNG Shu-kan, Ken Test Result : See attached sheet(s) from page 2 to 46. Conclusion : The submitted sample was found to comply with requirement of FCC Part 15 Subpart B and C. Remark : The Bluetooth Module used in five products is same in electronic circuitry, PCB layout and components. Therefore single Bluetooth unit was chosen to tested unit. This report is for Bluetooth 3.0 testing TEST REPORT Report No. : AS0049260(0) Date : 18 Aug 2014 Page 2 of 46 FCC ID: 2ACWW13002 Table of Contents 1 General Information ................................................................................................................................... 3 1.1 General Description ............................................................................................................................ 3 1.2 Location of the test site ....................................................................................................................... 5 1.3 List of measuring equipment............................................................................................................... 6 1.4 Measurement Uncertainty ................................................................................................................... 7 2 Description of the radiated emission test ................................................................................................... 8 2.1 Test Procedure .................................................................................................................................... 8 2.2 Test Result .......................................................................................................................................... 9 2.3 Maximum peak output power ........................................................................................................... 10 2.4 Radiated Emission Measurement Data ............................................................................................. 11 3 Description of the Line-conducted Test ................................................................................................... 13 3.1 Test Procedure .................................................................................................................................. 13 3.2 Test Result ........................................................................................................................................ 13 3.3 Graph and Table of Conducted Emission Measurement Data .......................................................... 13 4 Photograph ...............................................................................................................................................14 4.1 Photographs of the Test Setup for Radiated Emission and Conducted Emission ............................. 14 4.2 Photographs of the External and Internal Configurations of the EUT.............................................. 14 5 Supplementary document......................................................................................................................... 15 5.1 Bandwidth ......................................................................................................................................... 15 5.2 Duty cycle ......................................................................................................................................... 16 5.3 Transmission time ............................................................................................................................. 16 5.4 Power Spectral Density..................................................................................................................... 16 5.5 Hopping sequence ............................................................................................................................. 16 5.6 Average on time ................................................................................................................................ 17 6 Appendices...............................................................................................................................................18 TEST REPORT Report No. : AS0049260(0) Date : 18 Aug 2014 Page 3 of 46 FCC ID: 2ACWW13002 1 General Information 1.1 General Description Me Bluetooth(Dual Mode)is designed to communicate with devices with Bluetooth function through specific software. It is compatible with Bluetooth 2.0 and 4.0, provides a simple way to communicate with other Bluetooth device(such as smart phones). The Bluetooth module provides TTL level UART interface. It acts like a normal UART module in an embed…
Text truncated - open the document above for the full version.
TEST REPORT Report No. : AS0049260(0) Date : 18 Aug 2014 Tested by: Reviewed by: Mr. LEUNG Shu-kan, Ken Mr. WONG Lap-pong, Andrew Page 25 of 45 FCC ID: 2ACWW13002 A4. Hopping sequence 1 st example of fundamental frequency 2 nd example of fundamental frequency TEST REPORT Report No. : AS0049260(0) Date : 18 Aug 2014 Tested by: Reviewed by: Mr. LEUNG Shu-kan, Ken Mr. WONG Lap-pong, Andrew Page 26 of 45 FCC ID: 2ACWW13002 A4. Hopping sequence 3 rd example of fundamental frequency 4 th example of fundamental frequency
TEST REPORT Report No. : AS0049260(0) Date : 18 Aug 2014 Tested by: Reviewed by: Mr. LEUNG Shu-kan, Ken Mr. WONG Lap-pong, Andrew Page 27 of 45 FCC ID: 2ACWW13002 A5. 20 dB bandwidth and 99% bandwidth Channel: CH00 20 dB bandwidth 99% bandwidth TEST REPORT Report No. : AS0049260(0) Date : 18 Aug 2014 Tested by: Reviewed by: Mr. LEUNG Shu-kan, Ken Mr. WONG Lap-pong, Andrew Page 28 of 45 FCC ID: 2ACWW13002 A5. 20 dB bandwidth and 99% bandwidth Channel: CH39 20 dB bandwidth 99% bandwidth TEST REPORT Report No. : AS0049260(0) Date : 18 Aug 2014 Tested by: Reviewed by: Mr. LEUNG Shu-kan, Ken Mr. WONG Lap-pong, Andrew Page 29 of 45 FCC ID: 2ACWW13002 A5. 20 dB bandwidth and 99% bandwidth Channel: CH78 20 dB bandwidth 99% bandwidth
TEST REPORT Report No. : AS0049260(0) Date : 18 Aug 2014 Tested by: Reviewed by: Mr. LEUNG Shu-kan, Ken Mr. WONG Lap-pong, Andrew Page 30 of 45 FCC ID: 2ACWW13002 A6. Bluetooth Channel Spacing CH00-CH01 CH39-CH40 TEST REPORT Report No. : AS0049260(0) Date : 18 Aug 2014 Tested by: Reviewed by: Mr. LEUNG Shu-kan, Ken Mr. WONG Lap-pong, Andrew Page 31 of 45 FCC ID: 2ACWW13002 A6. Bluetooth Channel Spacing CH77-CH78
TEST REPORT Report No. : AS0049260(0) Date : 18 Aug 2014 Tested by: Reviewed by: Mr. LEUNG Shu-kan, Ken Mr. WONG Lap-pong, Andrew Page 32 of 45 FCC ID: 2ACWW13002 A7. Bluetooth Hopping Channel CH00-CH39 CH39-CH78
TEST REPORT Report No. : AS0049260(0) Date : 18 Aug 2014 Tested by: Reviewed by: Mr. LEUNG Shu-kan, Ken Mr. WONG Lap-pong, Andrew Page 33 of 45 FCC ID: 2ACWW13002 A8. Bluetooth Band Edge Lower channel (Peak measurement) Lower channel (Average measurement) TEST REPORT Report No. : AS0049260(0) Date : 18 Aug 2014 Tested by: Reviewed by: Mr. LEUNG Shu-kan, Ken Mr. WONG Lap-pong, Andrew Page 34 of 45 FCC ID: 2ACWW13002 A8. Bluetooth Band Edge Higher channel (Peak measurement) Higher channel (Average measurement)
TEST REPORT Report No. : AS0049260(0) Date : 18 Aug 2014 Tested by: Reviewed by: Mr. LEUNG Shu-kan, Ken Mr. WONG Lap-pong, Andrew Page 35 of 45 FCC ID: 2ACWW13002 A9. Bluetooth Average On Time Packet: DH1 Channel: CH00 TEST REPORT Report No. : AS0049260(0) Date : 18 Aug 2014 Tested by: Reviewed by: Mr. LEUNG Shu-kan, Ken Mr. WONG Lap-pong, Andrew Page 36 of 45 FCC ID: 2ACWW13002 A9. Bluetooth Average On Time Packet: DH3 Channel: CH00 TEST REPORT Report No. : AS0049260(0) Date : 18 Aug 2014 Tested by: Reviewed by: Mr. LEUNG Shu-kan, Ken Mr. WONG Lap-pong, Andrew Page 37 of 45 FCC ID: 2ACWW13002 A9. Bluetooth Average On Time Packet: DH5 Channel: CH00 TEST REPORT Report No. : AS0049260(0) Date : 18 Aug 2014 Tested by: Reviewed by: Mr. LEUNG Shu-kan, Ken Mr. WONG Lap-pong, Andrew Page 38 of 45 FCC ID: 2ACWW13002 A9. Bluetooth Average On Time Packet: DH1 Channel: CH39 TEST REPORT Report No. : AS0049260(0) Date : 18 Aug 2014 Tested by: Reviewed by: Mr. LEUNG Shu-kan, Ken Mr. WONG Lap-pong, Andrew Page 39 of 45 FCC ID: 2ACWW13002 A. Bluetooth Average On Time Packet: DH3 Channel: CH39 TEST REPORT Report No. : AS0049260(0) Date : 18 Aug 2014 Tested by: Reviewed by: Mr. LEUNG Shu-kan, Ken Mr. WONG Lap-pong, Andrew Page 40 of 45 FCC ID: 2ACWW13002 A9. Bluetooth Average On Time Packet: DH5 Channel: CH39 TEST REPORT Report No. : AS0049260(0) Date : 18 Aug 2014 Tested by: Reviewed by: Mr. LEUNG Shu-kan, Ken Mr. WONG Lap-pong, Andrew Page 41 of 45 FCC ID: 2ACWW13002 A9. Bluetooth Average On Time Packet: DH1 Channel: CH78 TEST REPORT Report No. : AS0049260(0) Date : 18 Aug 2014 Tested by: Reviewed by: Mr. LEUNG Shu-kan, Ken Mr. WONG Lap-pong, Andrew Page 42 of 45 FCC ID: 2ACWW13002 A9. Bluetooth Average On Time Packet: DH3 Channel: CH78 TEST REPORT Report No. : AS0049260(0) Date : 18 Aug 2014 Tested by: Reviewed by: Mr. LEUNG Shu-kan, Ken Mr. WONG Lap-pong, Andrew Page 43 of 45 FCC ID: 2ACWW13002 A9. Bluetooth Average On Time Packet: DH5 Channel: CH78
TEST REPORT Report No. : AS0049260(0) Date : 18 Aug 2014 Tested by: Reviewed by: Mr. LEUNG Shu-kan, Ken Mr. WONG Lap-pong, Andrew Page 44 of 45 FCC ID: 2ACWW13002 A10. Transmission Power Channel: CH00 Channel: CH39 TEST REPORT Report No. : AS0049260(0) Date : 18 Aug 2014 Tested by: Reviewed by: Mr. LEUNG Shu-kan, Ken Mr. WONG Lap-pong, Andrew Page 45 of 45 FCC ID: 2ACWW13002 A10. Transmission Power Channel: CH78 ***** End of Report *****
Test Setup Photo Front view (9kHz – 30MHz) Rear view (9kHz – 30MHz) Front view (30MHz – 1GHz) Rear view (30MHz – 1GHz) Front view (1GHz – 25GHz) Rear view (1GHz – 25GHz) EUT
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | 76.00 µW |

2.4G Wireless Serial-module
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter
Bluetooth module(Dual mode)
Equipment Class
DTS - Digital Transmission System