FCCID.CO- FCC ID Database
HomeCompaniesEquipment ClassesSearch

© 2026 FCC ID Database. All rights reserved.

AboutContactData sourced from FCC public records
  1. Home/
  2. C&A Marketing Inc./
  3. 2AD2W-LPWPF100B

2AD2W-LPWPF100BSmart Photo Frame

C&A Marketing Inc.
Smart Photo Frame - FCC ID 2AD2W-LPWPF100B - C&A Marketing Inc.
Click to zoom

Application Details

Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
Date of Grant
Nov 03, 2020
Application Purpose
Original Equipment
Date of Application
Nov 01, 2020
Equipment Note
Smart Photo Frame
Frequency Range
2402.00000000 - 2480.00000000
Company
C&A Marketing Inc.
Country
United States

Documents & Files

Select a file to view

Users Manual

↗

Attestation Statements

↗

Cover Letter(s)

↗
↗

External Photos

ID Label/Location Info

↗

Internal Photos

↗

RF Exposure Info

↗

Test Report

↗
↗

Test Setup Photos

↗

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

140mm 95mm 140mm 140mm 140mm 95mm FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. (1)This device may not cause interference, and (2)This device must accept any interference, including interference that may cause undesired operation of the device. Ce dispositif est conforme aux normes autoriser-exemptes du Canada RSS d'industrie L'exploitation est autorisée aux deux conditions suivantes : (1)l'appareil ne doit pas produire de brouillage, et (2)l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. 2. Changes or modifications not expressly approved by the party responsible fo r compliance could voi d the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply wit h the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and ca n radiate ra dio frequency energy and, i f not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that i nterference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or mor e of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The distance between user and products should be no less than 20cm IC STATEMENT This device complies with Industry Canada licence-exempt RSS standard(s) Operation is subject to the following two conditions: The distance between user and products should be no less than 20cm La distance entre l'utilisateur et de produits ne devrait pas être inférieure à 20cm

Attestation Statements

C&A Marketing Inc. DATE :2020-10-16 FCC ID: 2AD2W-LPWPF100B Product Name: Smart Photo Frame Model No.: LPWPF100B, LPWPF100W Model: LPWPF100B and LPWPF100W are the same internally, the circuit design, layout, components used and internal wiring are the same, but the model name and color are different. Dated:2020-10-16 By: Chaim Piekarski Signature : Title: Manager On behalf of : C&A Marketing Inc. Telephone: 848) 244-2000

Cover Letter(s)

C&A Marketing Inc. DATE:2020-10-16 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act asAgent On our behalf, I appoint Shenzhen Zhongjian Nanfang Testing Co.,Ltd.; 1st Floor, Block No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China;Bruce.Zhang, to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by C&A Marketing Inc. Dated this 2020-10-16 By: Chaim Piekarski Signature Printed Title: Manager On behalf of : C&A Marketing Inc. Telephone: (848) 244-2000

Cover Letter(s)

C&A Marketing Inc. DATE :2020-10-16 Equipment Autorisation Division Federal Communications Commission 7345 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AD2W-LPWPF100B Product Name: Smart Photo Frame Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: Schematics Block diagram Operation description BOM These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this 2020-10-16 By: Chaim Piekarski Signature Printed Title: Manager On behalf of : C&A Marketing Inc. Telephone: (848) 244-2000

ID Label/Location Info

label location label location

Internal Photos

Report No: CCISE200709201 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007092 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 36 of 55 Report No: CCISE200709201 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007092 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 37 of 55 Report No: CCISE200709201 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007092 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 38 of 55 Report No: CCISE200709201 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007092 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 39 of 55 Report No: CCISE200709201 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007092 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 40 of 55 Report No: CCISE200709201 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007092 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 43 of 55

RF Exposure Info

Shenzhen Zhongjian Nanfang Testing Co., Ltd. Report No: CCISE200709205 Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the CCIS product certif ication mark. The manufacturer should ensure that all products in series production are in conf ormity w ith the product sample detailed in this report. This report may only be reproduced and distributed in f ull. If the product in this report is used in any conf iguration other than that detailed in the report, the manuf acturer must ensure the new system complies w ith all relevant standards. This document cannot be reproduced except in f ull, w ithout prior w ritten approval of the Company. Any unauthorized alteration, f orgery or f alsif ication of the content or appearance of this document is unlaw f ul and off enders may be prosecuted to the f ullest extent of the law . Unless otherw ise stated the results show n in this test report ref er only to the sample(s) tested and such sample(s) are retained f or 90 days only. 1 Cover Page RF Exposure Evaluation Report Applicant: C&A Marketing Inc. Address of Applicant: 114 Tived Lane East Edison New Jersey 08837 United States Equipment Under Test (EUT) Product Name: Smart Photo Frame Model No.: LPWPF100B, LPWPF100W Trade mark: Lifeprint FCC ID: 2AD2W-LPWPF100B Applicable standards: FCC CFR Title 47 Part 2 Subpart J Section 2.1091 Date of sample receipt: 27 Jul., 2020 Date of Test: 28 Jul., to 12 Oct., 2020 Date of report issue: 12 Oct., 2020 Test Result: PASS* Report No: CCISE200709205 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007092 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 2 of 6 2 Version Version No. Date Description 00 12 Oct., 2020 Original Tested by: Date: 12 Oct., 2020 Test Engineer Reviewed by: Date: 12 Oct., 2020 Project Engineer Report No: CCISE200709205 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007092 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 3 of 6 3 Contents Page 1 COV ER P AGE ................................................................................................................................................................................. 1 2 VERSION........................................................................................................................................................................................... 2 3 CONTENTS ...................................................................................................................................................................................... 3 4 GENERAL INFORMATION ........................................................................................................................................................ 4 4.1 CLIENT INFORMATION ............................................................................................................................................................ 4 4.2 GENERAL DESC RIPTION OF E.U.T. .................................................................................................................................... 4 4.3 OPERATING MODES ............................................................................................................................................................... 4 4.4 LABORATORY FACILITY......................................................................................................................................................... 4 4.5 LABORATORY LOCATION ...................................................................................................................................................... 4 5 TECHNICAL REQUI REM ENTS SP ECIFICATION IN FCC CFR TITLE 47 PART 2.1091................................. 5 5.1 LIMITS........................................................................................................................................................................................ 5 5.2 TEST PROC EDURE .................................................................................................................................................................. 5 5.3 RESULT ..................................................................................................................................................................................... 6 5.4 CONCLUSION ........................................................................................................................................................................... 6 Report No: CCISE200709205 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007092 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 4 of 6 4 General Information 4.1 Client Information Applicant: C&A Marketing Inc. Address: 114 Tived Lane East Edison New Jersey 08837 United States Manufacturer: CHITECH SHENZHEN TECHNOLOGY CO., LTD Address: Chitech industrial Park, NO. 48, Xiashijia Road, Gongming Town, Guangming New Dist., Shenzhen, China 4.2 General Description of E.U.T. Product Name: Smart Photo Frame Model No.: LPWPF100B, LPWPF100W Operation Frequency: 2.4G Wi-Fi: 2412MHz~2462MHz ; 2422MHz~2452MHz Bluetooth/ BLE: 2402MHz~2480MHz Modulation technology: 802.11b: DSSS, 802.11g/n20/n40: OFDM Bluetooth BDR /BLE: GFSK, Bluetooth EDR: π/4-DQPSK, 8DPSK Antenna Type: Internal Antenna Antenna gain: BT/ BLE: 0.27 dBi; Wi-Fi: 0.27 dBi Test Sample Condition: The test samples were provided in good working order with no visibl…

Text truncated - open the document above for the full version.

Test Report

Shenzhen Zhongjian Nanfang Testing Co., Ltd. Report No: CCISE200709202V01 Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the CCIS product certif ication mark. The manufacturer should ensure that all products in series production are in conf ormity w ith the product sample detailed in this report. This report may only be reproduced and distributed in f ull. If the product in this report is used in any conf iguration other than that detailed in the report, the manuf acturer must ensure the new system complies w ith all relevant standards. This document cannot be reproduced except in f ull, w ithout prior w ritten approval of the Company. Any unauthorized alteration, f orgery or f alsif ication of the content or appearance of this document is unlaw f ul and off enders may be prosecuted to the f ullest extent of the law . Unless otherw ise stated the results show n in this test report ref er only to the sample(s) tested and such sample(s) are retained f or 90 days only. 1 Cover Page FCC REPORT (Bluetooth) Applicant: C&A Marketing Inc. Address of Applicant: 114 Tived Lane East Edison New Jersey 08837 United States Equipment Under Test (EUT) Product Name: Smart Photo Frame Model No.: LPWPF100B, LPWPF100W Trade mark: Lifeprint FCC ID: 2AD2W-LPWPF100B Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 Date of sample receipt: 27 Jul., 2020 Date of Test: 28 Jul., to 12 Oct., 2020 Date of report issued: 03 Nov., 2020 Test Result: PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No: CCISE200709202V01 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007092 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 2 of 87 2 Version Version No. Date Description 00 12 Oct., 2020 Original 01 03 Nov., 2020 Add equipment and update test setup diagram, Update page 27 Tested by: Date: 03 Nov., 2020 Test Engineer Reviewed by: Date: 03 Nov., 2020 Project Engineer Report No: CCISE200709202V01 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007092 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 3 of 87 3 Contents Page 1 COV ER PAGE ........................................................................................................................................................................................ 1 2 VERSION.................................................................................................................................................................................................. 2 3 CONTENTS ............................................................................................................................................................................................. 3 4 TEST SUMMARY .................................................................................................................................................................................. 4 5 GENERAL INFORMATI ON ............................................................................................................................................................... 5 5.1 CLIENT INFORMATION............................................................................................................................ 5 5.2 GENERAL DESCRIPTION OF E.U. T. .......................................................................................................... 5 5.3 TEST ENVIRONMENT AND MODE .............................................................................................................. 6 5.4 DESCRIPTION OF SUPPORT UNITS ........................................................................................................... 6 5.5 MEASUREMENT UNCERTAINTY................................................................................................................ 6 5.6 ADDITIONS TO, DEVIATIONS, OR EXCLUSIONS FROM THE METHOD ................................................................. 6 5.7 LABORATORY FACILITY .......................................................................................................................... 6 5.8 LABORATORY LOCATION ........................................................................................................................ 6 5.9 TEST INSTRUMENTS LIST ....................................................................................................................... 7 6 TEST RES ULTS AND M EAS UREM ENT DATA........................................................................................................................ 8 6.1 ANTENNA REQUIREMENT ....................................................................................................................... 8 6.2 CONDUCTED EMISSIONS........................................................................................................................ 9 6.3 CONDUCTED OUTPUT POWER .............................................................................................................. 12 6.4 20DB OCCUPY BANDWIDTH ................................................................................................................. 13 6.5 CARRIER FREQUENCIES SEPARATION .................................................................................................... 14 6.6 HOPPING CHANNEL NUMBER................................................................................................................ 15 6.7 DWELL TIME ..............................................................................................................…

Text truncated - open the document above for the full version.

Test Report

Report No: CCISE200709202 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007092 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 40 of 87 Appendix A - BT Test Data Maximum Conducted Output Power Condition Mode Frequency (MHz) Antenna Conducted Power (dBm) Duty Factor (dB) Total Power (dBm) Limit (dBm) Verdict NVNT 1- DH1 2402 Ant1 6.483 0 6.483 21 Pass NVNT 1- DH1 2441 Ant1 7.318 0 7.318 21 Pass NVNT 1- DH1 2480 Ant1 7.945 0 7.945 21 Pass NVNT 2- DH1 2402 Ant1 7.753 0 7.753 21 Pass NVNT 2- DH1 2441 Ant1 8.586 0 8.586 21 Pass NVNT 2- DH1 2480 Ant1 9.082 0 9.082 21 Pass NVNT 3- DH1 2402 Ant1 8.006 0 8.006 21 Pass NVNT 3- DH1 2441 Ant1 8.796 0 8.796 21 Pass NVNT 3- DH1 2480 Ant1 9.334 0 9.334 21 Pass Power NVNT 1-DH1 2402MHz Ant1 Report No: CCISE200709202 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007092 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 41 of 87 Power NVNT 1-DH1 2441MHz Ant1 Power NVNT 1-DH1 2480MHz Ant1 Report No: CCISE200709202 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007092 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 42 of 87 Power NVNT 2-DH1 2402MHz Ant1 Power NVNT 2-DH1 2441MHz Ant1 Report No: CCISE200709202 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007092 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 43 of 87 Power NVNT 2-DH1 2480MHz Ant1 Power NVNT 3-DH1 2402MHz Ant1 Report No: CCISE200709202 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007092 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 44 of 87 Power NVNT 3-DH1 2441MHz Ant1 Power NVNT 3-DH1 2480MHz Ant1 -20dB Bandwidth Condition Mode Frequency (MHz) Antenna -20 dB Bandwidth (MHz) Limit -20 dB Bandwidth (MHz) Verdict NVNT 1- DH1 2402 Ant1 1.019 0 Pass NVNT 1- DH1 2441 Ant1 1.024 0 Pass NVNT 1- DH1 2480 Ant1 1.025 0 Pass Report No: CCISE200709202 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007092 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 45 of 87 NVNT 2- DH1 2402 Ant1 1.311 0 Pass NVNT 2- DH1 2441 Ant1 1.311 0 Pass NVNT 2- DH1 2480 Ant1 1.313 0 Pass NVNT 3- DH1 2402 Ant1 1.278 0 Pass NVNT 3- DH1 2441 Ant1 1.278 0 Pass NVNT 3- DH1 2480 Ant1 1.276 0 Pass -20dB Bandwidth NVNT 1-DH1 2402MHz Ant1 Report No: CCISE200709202 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007092 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 46 of 87 -20dB Bandwidth NVNT 1-DH1 2441MHz Ant1 -20dB Bandwidth NVNT 1-DH1 2480MHz Ant1 Report No: CCISE200709202 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007092 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 47 of 87 -20dB Bandwidth NVNT 2-DH1 2402MHz Ant1 -20dB Bandwidth NVNT 2-DH1 2441MHz Ant1 Report No: CCISE200709202 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007092 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 48 of 87 -20dB Bandwidth NVNT 2-DH1 2480MHz Ant1 -20dB Bandwidth NVNT 3-DH1 2402MHz Ant1 Report No: CCISE200709202 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007092 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 49 of 87 -20dB Bandwidth NVNT 3-DH1 2441MHz Ant1 -20dB Bandwidth NVNT 3-DH1 2480MHz Ant1 Occupied Channel Bandwidth Condition Mode Frequency (MHz) Antenna 99% OBW (MHz) NVNT 1-DH1 2402 Ant1 0.8688394857 NVNT 1-DH1 2441 Ant1 0.8698741101 NVNT 1-DH1 2480 Ant1 0.8701640277 NVNT 2-DH1 2402 Ant1 1.18595987 NVNT 2-DH1 2441 Ant1 1.186415047 NVNT 2-DH1 2480 Ant1 1.186977432 Report No: CCISE200709202 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007092 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 50 of 87 NVNT 3-DH1 2402 Ant1 1.155887149 NVNT 3-DH1 2441 Ant1 1.155883699 NVNT 3-DH1 2480 Ant1 1.15643648 OBW NVNT 1-DH1 2402MHz Ant1 OBW NVNT 1-DH1 2441MHz Ant1 Report No: CCISE200709202 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007092 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 51 of 87 OBW NVNT 1-DH1 2480MHz Ant1 OBW NVNT 2-DH1 2402MHz Ant1 Report No: CCISE200709202 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007092 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 52 of 87 OBW NVNT 2-DH1 2441MHz Ant1 OBW NVNT 2-DH1 2480MHz Ant1 Report No: CCISE200709202 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007092 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telep…

Text truncated - open the document above for the full version.

Test Setup Photos

Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 7 Test Setup Photo Radiated Spurious Emission Below 1GHz Above 1GHz Shenzhen Zhongjian Nanfang Testing Co., Ltd. No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Conducted Emission

Contact Information

Applicant

Chaim Piekarski(Chief Executive Officer)
[email protected]8482442000Fax: 8482442361

Test Firm

JianYan Testing Group Shenzhen Co., Ltd.Bruce Zhang
[email protected]+86 (0) 755 23118282

Technical Specifications

#Rule PartsFrequency RangePower Output
115C2.40 GHz - 2.48 GHz8.58 mW
Confidentiality
Long Term
Grant Notes
Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Other Applications from C&A Marketing Inc.

2AD2W-RODMP20F

KODAK STEP Instant Mobile Photo Printer

Jun 09, 2026

Equipment Class

DSS - Part 15 Spread Spectrum Transmitter
Transmitter - FCC ID 2AD2W-LOWSB315BO2 - C&A Marketing Inc.
2AD2W-LOWSB315BO2

Transmitter

Jan 10, 2024

Equipment Class

DXX - Part 15 Low Power Communication Device Transmitter
Sprocket Photobooth - FCC ID 2AD2W-PHOTOBOOTH - C&A Marketing Inc.
2AD2W-PHOTOBOOTH

Sprocket Photobooth

Jan 04, 2024

Equipment Class

DTS - Digital Transmission System
Sprocket Studio Plus Photo Printer - FCC ID 2AD2W-HPISPS4X6 - C&A Marketing Inc.
2AD2W-HPISPS4X6

Sprocket Studio Plus Photo Printer

Jul 11, 2022

Equipment Class

DTS - Digital Transmission System
7-in-1 Professional Sensor (915MHz Transmitter) - FCC ID 2AD2W-FSSA570 - C&A Marketing Inc.
2AD2W-FSSA570

7-in-1 Professional Sensor (915MHz Transmitter)

Aug 26, 2021

Equipment Class

DXX - Part 15 Low Power Communication Device Transmitter