2AD37JUE302Wireless N300 Dual Band USB Adapter

� Windows Driver Installation Please follow the steps below to install your new wireless network card: 1. Insert the device driver CD into the CDROM drive on your computer, double-click the Setup.exe icon and run the Setup.exe program. 2. SelectI accept the terms of the license agreement and then click Next. 3. Select the setup type that best suits your needs, Install driver and Ralink WLAN Utilityis recommended. 4. Click Next, the Select Configuration Tool window will appear,you can manage this wireless adapter by either theRalink Configuration Toolor theMicrosoft Zero Configuration Tool. 5. Click Next,the ready to installwindow will appear. 6. Click Install, and wait while the installation is in process. 7. Finally, click Finish to complete the driver installation. � Connect to a Wireless Access Point 1. After installation has finished, it will automatically try to connect to any unencrypted wireless access point. If you want to connect to a specific wireless access point, or the access point you want to connect to uses encryption, you have to configure the wireless network card and input the correct password to connect to the wireless access point. To do this, double-click theicon. 2. The following window will appear: 3. Click the icon to scan available wireless access points. Scan results will display in the Network zone. If you can＇t find the access point you want to connect to, click the refresh button, until yourwireless access point is displayed. 4. Double-click the wireless access point’s SSID you want to use.If the access point is encrypted, you should follow the prompts to select the appropriate encryption type and enter your password. 5. After you have connected to the wireless access point successfully, you can get detailed information on the connected access point such as status, IP address, speed, etc. Click the icon then the iconhere you will see the signal quality and signal strength information. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferece in a residential installation. Wireless N300 Dual Band USB Adapter FCC Warning Statements: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the fo llowing two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC RF Exposure Warning: This device has been evaluated to meet general RF exposure requirement , The device can be used in portable exposure condition without restriction. The product is restricted for indoor use only.

KaiJet Technology International Limited Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2015-01-31 SUBJECT: FCC Application for ( FCCID: 2AD37JUE302) To Whom It May Concern: We, the undersigned, hereby attest to the fact that we will apply the Declaration of Conformity procedure to the class B computer peripheral portion of this composite device. We understand that devices subject to the DoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage: https://apps.fcc.gov/oetcf/eas/reports/TestFirmSearch.cfm Select the "accredited" option to search for FCC recognized accredited test firms. Test facilities located in countries, where the U.S. does not have an operational Telcom MRA are not recognized by the FCC to test for the DoC procedure. Regards, Signatory Dated this: 2015-01-31 Agency agreement expiration date: By: Ta i Yu - C h i Signature Printed Title: Manager On behalf of : KaiJet Technology International Limited Telephone: 886-2-2269-5533 We will apply FCC DOC at FCC recognized and accredited MRA lab and will sell the product after FCC DOC is issued

DATE : 2015-01-31 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AD37JUE302___________ Product Nam e:_ Wireless N300 Dual Band USB Adapter _________ Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...) • Schematics • Block diagram • Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this: 2015-01-31 Agency agreement expiration date: Usually Give 8 - 12 Months By: Tai Yu-Chi Signature Printed Title: Manager On behalf of : KaiJet Technology International Limited Telephone: 886-2-2269-5533

APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Photo 1 Photo 2 ANT Photo 3 Photo 4 Photo 5 Photo 6 Photo 7 Photo 8

FCC ID LABELING AND LOCATION FCC ID Label Wireless N300 Dual Band USB Adapter Model NO.: JUE302 FCC ID: 2AD37JUE302 FCC ID Label Location The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Photo 1 Photo 2 Photo 3 Photo 4

RF Exposure evaluation According to KDB 447498 D01 General RF Exposure Guidance v05 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison For 2.4 GHz band: Maximum output power is 8.92 dBm (7.798 mW) (7.798mW /5mm) ·[√2.462 (GHz)]= 2.45 <3.0 for 1-g SAR For 5.2 GHz band: Maximum output power is 6.84 dBm (4.831 mW) (4.831mW /5mm) ·[√5.24 (GHz)]= 2.21 <3.0 for 1-g SAR For 5.8 GHz band: Maximum output power is 6.56 dBm (4.529 mW) (4.529mW /5mm) ·[√5.825 (GHz)]= 2.19 <3.0 for 1-g SAR Then SAR evaluation is not required.

FCC RADIO TEST REPORT FCC ID:2AD37JUE302 Product烉 Wireless N300 Dual Band USB Adapter Trade Name烉 j5 create Model Name烉 JUE302 Serial Model烉 N/A Report No.烉 NTEK-2015NT0113211F1 Prepared for KaiJet Technology International Limited 6F., No113, Zhongcheng Rd., Tucheng Dist., New Taipei City 236, Taiwan (R.O.C.) Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen P.R. China Tel.: +86-0755-61156588 Fax.: +86-0755-61156599 Website:www.ntek.org.cn Page 2 of 71 Report No.: NTEK-2015NT0113211F1 TEST RESULT CERTIFICATION Applicant’ s name ........ KaiJet Technology International Limited Address ........................ 6F., No113, Zhongcheng Rd., Tucheng Dist., New Taipei City 236, Taiwan (R.O.C.) Manufacture's Name ... SHENZHEN MTN ELECTRONICS CO.,LTD. Address ........................ No.5,9 South Futai Road,Pingxi Community,Pingdi Street,Longgang District,Shenzhen City,518117,China Product description Product name .................Wireless N300 Dual Band USB Adapter Model and/or type reference ..................... JUE302 Serial Model .................... N/A Standards .................... FCC Part15.407 Test procedure ................ A NSI C63.4-2009 and KDB 789033 D01 General UNII Test Procedures Old Rules v01r04 This device described above has been tested by NTEK, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of NTEK, this document may be altered or revised by NTEK, personal only, and shall be noted in the revision of the document. Date of Test ...................................... Date (s) of performance of tests ....... 13 Jan. 2015 ~23 Jan. 2015 Date of Issue ..................................... 23 Jan. 2015 Test Result ......................................... Pass Testing Engineer : (Kyle Xu) Technical Manager : (Brown Lu) Authorized Signatory : (Bill Yao) Page 3 of 71 Report No.: NTEK-2015NT0113211F1 Table of Contents Page 1 . SUMMARY OF TEST RESULTS 5 1.1 TEST FACILITY 6 1.2 MEASUREMENT UNCERTAINTY 6 2 . GENERAL INFORMATION 7 2.1 GENERAL DESCRIPTION OF EUT 7 2.2 DESCRIPTION OF TEST MODES 10 2.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 11 2.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) 12 2.5 EQUIPMENTS LIST FOR ALL TEST ITEMS 13 3 . EMC EMISSION TEST 14 3.1 CONDUCTED EMISSION MEASUREMENT 14 3.1.1 POWER LINE CONDUCTED EMISSION LIMITS 14 3.1.2 TEST PROCEDURE 15 3.1.3 DEVIATION FROM TEST STANDARD 15 3.1.4 TEST SETUP 15 3.1.5 EUT OPERATING CONDITIONS 15 3.1.6 TEST RESULTS 16 3.2 RADIATED EMISSION MEASUREMENT 18 3.2.1 RADIATED EMISSION LIMITS 18 3.2.2 TEST PROCEDURE 19 3.2.3 DEVIATION FROM TEST STANDARD 19 3.2.4 TEST SETUP 20 3.2.5 EUT OPERATING CONDITIONS 21 3.2.6 TEST RESULTS (BETWEEN 9KHZ – 30 MHZ) 22 3.2.7 TEST RESULTS (BETWEEN 30MHZ – 1GHZ) 23 3.2.8 TEST RESULTS (ABOVE 1000 MHZ) 25 4 . POWER SPECTRAL DENSITY TEST 26 4.1 APPLIED PROCEDURES / LIMIT 26 4.1.1 TEST PROCEDURE 26 4.1.2 DEVIATION FROM STANDARD 26 4.1.3 TEST SETUP 26 4.1.4 EUT OPERATION CONDITIONS 27 4.1.5 TEST RESULTS 28 5 . 26 DB & 99% EMISSION BANDWIDTH 39 5.1 APPLIED PROCEDURES / LIMIT 39 5.1.1 TEST PROCEDURE 39 Page 4 of 71 Report No.: NTEK-2015NT0113211F1 Table of Contents Page 5.1.2 EUT OPERATION CONDITIONS 39  5.1.3 TEST RESULTS 40 6 . OUTPUT POWER TEST 51 6.1 APPLIED PROCEDURES / LIMIT 51 6.1.1 TEST PROCEDURE 51 6.1.2 DEVIATION FROM STANDARD 51 6.1.3 TEST SETUP 51 6.1.4 EUT OPERATION CONDITIONS 51 6.1.5 TEST RESULTS 52 7 . OUT OF BAND EMISSIONS 53 7.1 DEVIATION FROM STANDARD 53 7.2 TEST SETUP 53 7.3 EUT OPERATION CONDITIONS 53 7.4 TEST RESULTS 54 8 . PEAK EXCURSION RATIO 55 8.1 APPLIED PROCEDURES / LIMIT 55 8.1.1 TEST PROCEDURE 55 8.1.2 DEVIATION FROM STANDARD 55 8.1.3 TEST SETUP 55 8.1.4 EUT OPERATION CONDITIONS 55 8.1.5 TEST RESULTS 56 9 . ANTENNA REQUIREMENT 65 9.1 STANDARD REQUIREMENT 65 9.2 EUT ANTENNA 65 10 . FREQUENCY STABILITY 66 11 . EUT TEST PHOTO 70 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Page 5 of 71 Report No.: NTEK-2015NT0113211F1 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15 (15.407) , Subpart E Standard Section Test Item Judgment Remark FCC §15.207 AC Power Line Conducted EmissionsPASS FCC §15.209(a), 15.407(b) Spurious Radiated Emissions PASS FCC §15.407(a) 26 dB and 99% Emission Bandwidth PASS FCC §407(a)(1) Peak Output Power Measurement PASS FCC §2.1051, §15.407(b) Band Edges PASS FCC §15.407(a)(1) Power Spectral Density PASS FCC §15.407(a)(6) Peak Excursion Ratio PASS IC RSS-210 §2.3 Receiver Spurious Radiated EmissionsPASS FCC §2.1051, §15.407(b) Spurious Emissions at Antenna Terminals PASS FCC §15.203 Antenna Requirement PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report Page 6 of 71 Report No.: NTEK-2015NT0113211F1 1.1 TEST FACILITY NTEK Testing Technology Co., Ltd Add.:1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street, Bao’an District, Shenzhen P.R. China. FCC Registration No.:238937; IC Registration No.:9270A-1 CNAS Registration No.:L5516 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y² U炻where expended uncertainty Uis based on a standard uncertainty multiplied by a coverage factor of k=2炻providing a level of confidence of approximately 95 %ˤ No. Item Uncertainty 1 Conducted Emission Test ±1.38dB 2 RF power,conducted ±0.16dB 3 Spurious emissions,conducted ±0.21dB 4 All emissions,radiated(<1G) ±4.68dB 5 All emissions,radiated(>1G) ±4.89dB 6 Temperature ±0.5°C 7 Humidity ±2% Page 7 of 71 Report No.: NTEK-2015NT0113211F1 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT Equipment Wireless N300 Dual Band USB Adapter Trade Name j5 create Model Name JUE302 Product Description The EUT is a Wir…

Text truncated - open the document above for the full version.

Radiated Measurement Photos Conducted Measurement Photos