2AD5K-C8723RHPSHWlan module

Partron １ Partron Co., Ltd. 22, Samsung 1-ro 2-gil, Hwaseong-si, Gyeonggi-do, Republic of Korea C8723RHPS-H User Manual Model : C8723RHPS-H Before using this product, Please read this user's manual just make sure to save it for later. Partron ２ Partron Co., Ltd. 22, Samsung 1-ro 2-gil, Hwaseong-si, Gyeonggi-do, Republic of Korea C8723RHPS-H 1. General information 1 1. Mechanical Information Length 14.00±0.20 mm Width 14.00±0.20 mm Height 2.50±0.20 mm Weight 0.85 g 1. 2. Temperature Information Operating temperature +0°C ~ +70°C Storage temperature -40°C ~ +85°C 1. 3. Connection Information - Interface : SDIO - 46 Pin Solder pads used (SMT Type) - All Pin need to protect against RF radiation or conduction noise. 1. 4. DC Characteristics Recommended Operating Conditions Symbol Conditions Min. Nom. MAX. Unit DC 3.3V Module - 3.0 3.3 3.6 V 1. 5. Operating Frequency Range Parameter Conditions Min. Nom. MAX. Unit Operating Frequency Range CE 2412 - 2472 MHz FCC 2412 - 2462 MHz 1. 6. Product Image C8723RHPS-H Front Side - Top View Bottom Side - Bottom View Partron ３ Partron Co., Ltd. 22, Samsung 1-ro 2-gil, Hwaseong-si, Gyeonggi-do, Republic of Korea C8723RHPS-H 2. Product Operation 2.1. Connect a serial cable between the PC and the Wi-Fi Module 2.2 Wi-Fi module Power On. 2.3 Additional modules . Find the kernel directory and add the module. # insmod /mnt/realtek/8723bs_v4.3.16.9_pv03.ko 2.4 Activates the Wi-Fi module function. # ifconfig wlan0 up 2.5 If you want to use other functions, you can use the Linux commands. Partron ４ Partron Co., Ltd. 22, Samsung 1-ro 2-gil, Hwaseong-si, Gyeonggi-do, Republic of Korea C8723RHPS-H 3. Test Command Examples B mode Test Command ------------------------------------------------------------------- rtwpriv wlan0 mp_channel 1 rtwpriv wlan0 mp_bandwidth 40M=0,shortGI=0 rtwpriv wlan0 mp_ant_tx a rtwpriv wlan0 mp_rate 22 rtwpriv wlan0 mp_get_txpower 0 rtwpriv wlan0 mp_ctx background,pkt rtwpriv wlan0 mp_ctx stop rtwpriv wlan0 mp_channel 7 rtwpriv wlan0 mp_bandwidth 40M=0,shortGI=0 rtwpriv wlan0 mp_ant_tx a rtwpriv wlan0 mp_rate 22 rtwpriv wlan0 mp_get_txpower 0 rtwpriv wlan0 mp_ctx background,pkt rtwpriv wlan0 mp_ctx stop rtwpriv wlan0 mp_channel 13 rtwpriv wlan0 mp_bandwidth 40M=0,shortGI=0 rtwpriv wlan0 mp_ant_tx a rtwpriv wlan0 mp_rate 22 rtwpriv wlan0 mp_get_txpower 0 rtwpriv wlan0 mp_ctx background,pkt rtwpriv wlan0 mp_ctx stop Partron ５ Partron Co., Ltd. 22, Samsung 1-ro 2-gil, Hwaseong-si, Gyeonggi-do, Republic of Korea C8723RHPS-H G Mode Test Command ------------------------------------------------------------------- rtwpriv wlan0 mp_channel 1 rtwpriv wlan0 mp_bandwidth 40M=0,shortGI=0 rtwpriv wlan0 mp_ant_tx a rtwpriv wlan0 mp_rate 108 rtwpriv wlan0 mp_get_txpower 0 rtwpriv wlan0 mp_ctx background,pkt rtwpriv wlan0 mp_ctx stop rtwpriv wlan0 mp_channel 7 rtwpriv wlan0 mp_bandwidth 40M=0,shortGI=0 rtwpriv wlan0 mp_ant_tx a rtwpriv wlan0 mp_rate 108 rtwpriv wlan0 mp_get_txpower 0 rtwpriv wlan0 mp_ctx background,pkt rtwpriv wlan0 mp_ctx stop rtwpriv wlan0 mp_channel 13 rtwpriv wlan0 mp_bandwidth 40M=0,shortGI=0 rtwpriv wlan0 mp_ant_tx a rtwpriv wlan0 mp_rate 108 rtwpriv wlan0 mp_get_txpower 0 rtwpriv wlan0 mp_ctx background,pkt rtwpriv wlan0 mp_ctx stop Partron ６ Partron Co., Ltd. 22, Samsung 1-ro 2-gil, Hwaseong-si, Gyeonggi-do, Republic of Korea C8723RHPS-H 4. Antenna Design C8723RHPS-H Module use external pcb antenna below. - Module Designed to use external antenna. (There is only antenna Pad to connect external antenna.) Partron ７ Partron Co., Ltd. 22, Samsung 1-ro 2-gil, Hwaseong-si, Gyeonggi-do, Republic of Korea C8723RHPS-H 5. Label Design There are two methods of labeling. 1. Label attatch 2. Laser Marking Partron ８ Partron Co., Ltd. 22, Samsung 1-ro 2-gil, Hwaseong-si, Gyeonggi-do, Republic of Korea C8723RHPS-H 6. FCC compliance information Applicable FCC Rules FCC PART 15 Subpart C (15.247) , ANSI C 63.10(2013) , KDB 558074 D01v05r02 THIS MODULE COMPLIES WITH PART 15 OF THE FCC RULES. Operation is subject to the following two conditions: (1) This Module may not cause harmful interference, and (2) This Module must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment under FCC rules. Partron ９ Partron Co., Ltd. 22, Samsung 1-ro 2-gil, Hwaseong-si, Gyeonggi-do, Republic of Korea C8723RHPS-H Limited module procedures C8723RHPS-H is a general product and can be used for any application. And also used at the front-end of wireless products using Wireless Lan B, G Mode. RF exposure considerations This appliance and its antenna must not be co-located or operation in conjunction with any other antenna or transmitter. A minimum separation distance of 20 cm must be maintained between the antenna and the person for this appliance to satisfy the RF exp…

Text truncated - open the document above for the full version.

PARTRON CO., LTD FCC Modular Approval Request Rev 3.0 Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2020.01.22 Subject; Modular Transmitter Application Company name: PARTRON CO., LTD FCC ID: 2AD5K-C8723RHPSH Dear Sir/Madam, This letter includes the FCC application requirements for Modular Transmitter Approval Request for;- FCC KDB 996369 D01 ‘Module Certification Guide v02; and FCC KDB 996369 D03 OEM Manual v01 In accordance with 47CFR 15.212 Modular Transmitters and KDB 996369 D01 ‘Module Equip Auth Guide v02’. FCC ID 2AD5K has been examined against the following requirements. Requirement per 15.212 and KDB 996369 D01 Explanation from Grantee (do not write yes/no, but explain why product complies/how it is achieved) The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly. It was perfectly shielded by shield case. The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal. Module have buffer. It operates automatically by the Driver. The module must contain power supply regulation on the module. Module don’t have power supply regulation. It use external power via PAD. It can comply with power supply regulation from complete Product. The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per §§ 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b). Module use only one unique antenna. The module must demonstrate compliance in a stand-alone configuration. The module demonstrate compliance in a stand-alone configuration. The module must be labeled with its permanently affixed FCC ID label, or use an electronic display (see KDB Publication 784748). IT use affixed FCC ID Label or Laser Marking The module must comply with all specific rules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee. It comply with all requirements. The module must comply with RF exposure requirements It comply with all requirements. PARTRON CO., LTD FCC Modular Approval Request Rev 3.0 Integration Instructions for host product manufacturers The following items are submitted in support of application for Modular Transmitter FCC ID as noted above as required by the FCC KDB 996369 D03 OEM Manual v01. These items are provided as integration instructions for host product manufacturers (e.g., OEM instruction manual) to use when integrating a module in a host product. Any requirements that are not applicable to the Module are as indicated below. Summary of requirements and Checklist. Refer to the KDB for description of the complete requirements; KDB Ref Sect Requirements of KDB 996369 D03 User Manual Page Number reference 2.2 List of applicable FCC rules 8 2.3 Summarize the specific operational use conditions 2, 9 2.4 Limited module procedures 3 2.5 Trace antenna designs 6 2.6 RF exposure considerations 9 2.7 Antennas 6 2.8 Label and compliance information 7 2.9 Information on test modes and additional testing requirements 4, 5 2.10 Additional testing, Part 15 Subpart B disclaimer 8 Name: Youlim, Shin Date: 2020.01.22 Title: C8723RHPS-H Signature of applicant

Partron Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 09.December, 2019 Subject; Request for Confidentiality FCC ID: 2AD5K-C8723RHPSH To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely.  Schematic Diagram  Block Diagram  Operational Description Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission' s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant shot-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705.  External Photos  Internal Photos  Test Setup Photos  User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Youlim, Shin Title: Engineer

PARTRON CO., LTD Letter of Authorization Company: PARTRON CO., LTD Address: 22, Samsung 1-ro 2-gil, Hwaseong-si, Gyeonggi-do, South Korea Product Name: Wlan module Model Number: C8723RHPS-H FCC Identifier: 2AD5K-C8723RHPSH We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Youlim, Shin Date: 09 / December / 2019 Title: Engineer Signature of applicant:

FRONT REAR LEFT RIGHT TOP BOTTOM

Module Front Module Rear

RF Exposure Measurement 1. Introduction The maximum Gain measured in Fully Anechoic Chamber 2. Classification MODE: WLAN 3. RF Exposure Limit Magnetic Field Stren gth(A/m) Power Density (mW/cm 2 ) Average Time (minutes) 1.63 * (100) 6 4.89/f * (900/f 2 ) 6 0.1631.06 F/3006 56 Magnetic Field Stren gth(A/m) Power Density (mW/cm 2 ) Average Time (minutes) 1.63 * (100) 30 2.19/f * (180/f 2 ) 30 0.0730.230 -F/150030 -1.030 F = Frequency in MHz * = Plane-wave equivalent power density Frequency Range (MHz) Electric Field Strength (V/m) 300 - 1500 1500 - 100,000 1500 - 100,000- 30 - 30027.5 300 - 1500- Because this deivce is transmitting the high power signal, it is regarded specially as a dangerous band for its heating harmfulness to the human body. The manufacturer whose product is working in this frequency band is obligatory to prove the harmfulness of his product. In this document, we try to prove the safety of radiation harmfulness to the human body for our product. The limit for Maximum Permissible Exposure (MPE) specified in FCC 1.1310 is followed. The Gain of the antenna used in this product is measured in a Fully Anechoic Chamber (FAC), and the maximum total power input to the antenna is measured. Through the Friis transmission formula and the maximum gain of the antenna, we can calculate the distance, away from the product, where the limit of MPE is reached. Page 1 of 3 The antenna of the product, under normal use condition, is at least 20cm away from the body of the user. Warning statement for keeping 20cm separation distance and the prohibition of operating next to a person has been printed on the user's manual. So, this product is classified as the Mobile Device. According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environmental impact of human exposure to radio-frequency(RF) radiation as specified in 1.1307 (b). LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) - Class A Frequency Range (MHz) 0.3 - 3.0614 0.3 - 1.34614 3.0 - 301842/f Electric Field Strength (V/m) 30 - 300 1.34 - 30824/f 61.4 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) - Class B 4. Friis Formula R= The maximum Gain measured in Fully Anechoic Chamber WLAN : 2.68 dBi or 1.853532 (nemeric) P out = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 MODE: WLAN Page 2 of 3 The software provided by Manufacturer enabled the EUT to transmit with max power at lowest, middle and highest channel individually. Pd is the limit of MPE, 1mW/cm 2 . If we know the maximum Gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. S PG 4 5. Test Results 5.1 The maximum Gain measured in Fully Anechoic Chamber antenna gain (dBi) nemeric 2.68 dBi 1.853532 (numeric) 5.2 Output Power into Antenna & Power Density (1mW/cm2) : MODE: WLAN Channel Channel Frequency (MHz) Output Power to Antenna (mW) Power Density (mW/cm2) First ch2412.0033.00000.017595 Middle ch2437.0024.10000.012849 Last ch2462.0022.40000.011943 Channel Channel Frequency (MHz) Output Power to Antenna (mW) Power Density (mW/cm2) First ch2412.0018.90000.010077 Middle ch2437.0016.50000.008797 Last ch2462.0015.30000.008157 MODE: WLAN 0.017595 (mW/cm2) < 1.0 (mW/cm2) WLAN Band Page 3 of 3

Test Report for FCC Company name Address Telephone Contack person Product name Model No. Serial No. Test date Testing location Standard Tested by Reviewed by Abbreviation * Note - This test report is not permitted to copy partly without our permission - This test result is dependent on only equipment to be used - This test result based on a single evaluation of one sample of the above mentioned PARTRON CO., LTD 22, Samsung 1-ro 2-gil, Hwaseong-si, Gyeonggi-do, Republic of Korea C8723RHPS-H Wlan module FCC ID : 2AD5K-C8723RHPSH Report NumberESTRFC2001-001 PARTRON CO., LTD Jong Koo Kim Applicant Product Report Number : ESTRFC2001-001 EST-QP17-R-I01-F04 (2019.11.01) Page 1 of 49 Date of issue OK, Pass = Passed, Fail = Failed, N/A = not applicable 16-Jan-20 Engineering Manager I.K. Hong Vietnam Country of origin 347-69, Jungbu-daero 147beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do 467-811, R. O. Korea Asst Manager Y.M. Won (Signature) (Signature) +82-31-371-1583 659627 None FCC PART 15 Subpart C (15.247) , ANSI C 63.10(2013) , KDB 558074 D01v05r02 Measurement facility registration number 15-Oct-19 ~ 29-Nov-19 Manufacturer 3 4 5 6 10 10 10 10 11 15 15 15 16 16 16 17 17 17 17 18 22 22 22 22 23 29 29 29 30 31 39 47 11.1 Measurement e quipment ..........................................................................................47 11.2 Environmental conditions ....................................................................................... 47 48 Contents 1. Laboratory Information ................................................................................................... 2. Description of EUT ......................................................................................................... 3. Test Standards ............................................................................................................ 5.4 Trace data ............................................................................................................ ... 6. Maximum Peak Output Power .......................................................................................... 4. Measurement condition ................................................................................................... 5. DTS bandwidth ............................................................................................................ 5.1 Test procedure ......................................................................................................... 5.2 Test instruments and measurement setup ..................................................................... 7.1 Test procedure ......................................................................................................... 10. Measurement of radiated emission ................................................................................. 8. Maximum power spectral density level in the fundamental emission ....................................... 9.2 Test instruments and measurement setup ..................................................................... 9.3 Measurement results ................................................................................................ 9.4 Trace data of band-edge & out of emissioin ............................................................... ... 8.4 Trace data ............................................................................................................... 6.1 Test procedure ......................................................................................................... 6.2 Measurement results ................................................................................................ Appendix 1. Special diagram 5.3 Measurement results ................................................................................................ 7. Maximum conducted (average) output power .................................................................. ... 7.2 Measurement results ................................................................................................ 9. Emissions in non-restricted frequency bands .................................................................. 8.1 Test procedure ...................................................................................................... ... 10.4 Test Data.................................................................................................................. 11. Measurement of conducted emission .............................................................................. 9.1 Test procedure ......................................................................................................... 8.3 Measurement results ................................................................................................ 8.2 Test instruments and measurement setup .................................................................. ... Report Number : ESTRFC2001-001 EST-QP17-R-I01-F04 (2019.11.01) Page 2 of 49 10.1 Measurement equipment ....................................................................................... ... 10.3 Measurement Instrument setting for Radiated Emission ................................................ 10.5 Restricted Band Edges .......................................................................................... ... 11.3 Test Data.................................................................................................................. 10.2 Environmental conditions .......................................................................................... Appendix 2. Antenna Requirement 1. Laboratory Information 1.1 General 1.2 Test Lab. Corporation Name : ESTECH Co., Ltd. Head Office : Suite 1015 World Meridian II, 123 Gasan Digital 2-ro, Geumcheon-gu, Seoul 153-759, R. O. Kore a EMC/Telecom/Safety Test Lab : 347-69, Jungbu-daero 147beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do 467-811, R. O. Korea 1.3 Official Qualification(s) MSIP : Granted Accreditation from Mini…

Text truncated - open the document above for the full version.

2. Rear TEST SRTUP PHOTO 1. Conducted Emission setup photo 1. Front 2. Rear 1. Front 2. Radiated Emission setup photo (below 1000 MHz) 2. Rear 1. Front 3. Radiated Emission setup photo (above 1 GHz)