2AD6M-X20MeshRanger X20 Dual 5GHz 802.11ac

P2 MOBILE TECHNOLOGIES LIMITED X20 QUICK START GUIDE Copyright © 2015. P2 Mobile Technologies Limited. All rights reserved. Website: www.p2mt.com Email: [email protected] Tel: (+852) 3905 1880 Fax: (+852) 3695 0820 1 SmartMoment Quick Start Guide 1.1 Overview SmartMoment (Lightweight Mode) is a built-in network setup tools and virtual controller designed to streamline the process of setting-up a Wi-Fi network. 1.2 Purpose The lightweight mode allows you to:  Set up a basic network with just three steps  Configure IP address, netmask, gateway, DNS, SSID and password  Have a quick overview of AP and client device 1.3 Connection Method 1. Wireless - Power up the AP. - Use mobile device to connect to the SSID “P2MTwifi” with password “p2mtuser”. - Open the browser and type the IP address “172.16.0.1”. - Navigate to the top menu bar and click Lightweight under Mode. 2. Wired - Power up the AP. - Connect the AP and the PC with a LAN cable. - Set the IP of the PC to “192.168.1.2” - Navigate to SmartMoment by “192.168.1.1” 3. Default Login Information  Username: p2mtadmin  Password: p2mtadmin 1.4 Note SmartMoment Lightweight mode is for basic configuration ONLY. Use the advance mode for advanced setting. For details, please refer to the SmartMoment User Guide. Copyright © 2015. P2 Mobile Technologies Limited. All rights reserved. Website: www.p2mt.com Email: [email protected] Tel: (+852) 3905 1880 Fax: (+852) 3695 0820 2 Explanation of Ports Ports & Connectors Quantity & Specifications 1. LAN Port 10/100/1000M Base-T Ethernet port (RJ-45), used as a WAN port and used for being powered by PoE function. 2. LED LED Function State—Colour Indication RUN AP Power / Ready Status Steady—Green AP is ready. Off No power to AP. LAN Network Link Status Steady—Green 1000Mbps Ethernet link negotiated. Flashing Ethernet link activity. Off Ethernet link unavailable. Radio 0 Integrated 5 GHz Radio Status Steady—Green Integrated 5 GHz radio is enabled. Off Integrated 5 GHz radio is disabled. Radio 1 External 5 GHz Radio Status Steady—Green External 5 GHz radio is enabled. Off External 5 GHz radio is disabled. Note: ━ AP that is not set up according to the instructions in the user Copyright © 2015. P2 Mobile Technologies Limited. All rights reserved. Website: www.p2mt.com Email: [email protected] Tel: (+852) 3905 1880 Fax: (+852) 3695 0820 manual may malfunction. ━ The connection quality of the AP and Wi-Fi coverage vary with the actual environment. ━ Only use the mounting kits that is compatible with the AP. ━ Please refer to the network plan provided. Without adhering to the network plan may result in a network failure. ━ For the best practice, please consult P2MT authorized engineers. 3 Mounting 3.1 Pole Mounting Procedure(Pole Size: Ø40-52mm) 1. Firstly install the L shaped clamp, with M6 screw nut, spring washer and flat washer. Four screws need be installed. 2. Put the U shaped screw stem and U shaped slot into the hole. And then drive the M6 crew nut and M6 washer. 3. Install the clamp on the back of the AP, with M6*12 screw bolt, M6 spring washer and M6 flat washer. Four screw bolts need be installed. 4. Input M6*12 screw bolt and M6 washer into the hole on the back and drive them. 5. Finally mount the AP on the pole as shown in the picture. And drive the screw nut tight with wrench. -End of Quick Start Guide- to provide a separation distance of at least 141.59cm Federal Communications Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. RF exposure warning This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter.

1 of 5 External Photo (1) EUT Photo (2) EUT Photo (3) EUT Photo (4) EUT Photo (5) EUT Photo (6) EUT Photo (7) EUT Photo (8) EUT Photo (9) EUT Photo (10) EUT Photo

Label Label Location

1 of 9 Internal Photo (1) EUT Photo (2) EUT Photo (3) EUT Photo (4) EUT Photo (5) EUT Photo (6) EUT Photo (7) EUT Photo (8) EUT Photo (9) EUT Photo (10) EUT Photo (11) EUT Photo (12) EUT Photo (13) EUT Photo (14) EUT Photo (15) EUT Photo (16) EUT Photo (17) EUT Photo

MRT Technology (Suzhou) Co., Ltd Report No.: 1511RSU00202 Phone: +86-512-66308358 Report Version: V02 Fax: +86-512-66308368 Issue Date: 01-22-2016 Web: www.mrt-cert.com FCC ID: 2AD6M-X20 Page Number: 1 of 6 RF Exposure Evaluation Declaration FCC ID: 2AD6M-X20 APPLICANT: P2 Mobile Technologies Limited Application Type: Certification Product: MeshRanger X20 Dual 5GHz 802.11ac Model No.: X20 FCC Classification: Unlicensed National Information Infrastructure (UNII) Reviewed By : ( Robin Wu ) Approved By : ( Marlin Chen ) The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standards through the calibration of the equipment and evaluated measurement uncertainty herein. The test report shall not be reproduced except in full without the written approval of MRT Technology (Suzhou) Co., Ltd. Report No.: 1511RSU00202 FCC ID: 2AD6M-X20 Page Number: 2 of 6 Revision History Report No. Version Description Issue Date 1511RSU00202 Rev. 01 Initial report 01-20-2016 1511RSU00202 Rev. 02 Revised the safety distance 01-22-2016 Report No.: 1511RSU00202 FCC ID: 2AD6M-X20 Page Number: 3 of 6 1. PRODUCT INFORMATION 1.1. Equipment Description Product Name MeshRanger X20 Dual 5GHz 802.11ac Model No. X20 Frequency Range For 802.11a/n-HT20/ac-VHT20: 5180~5240MHz, 5745~5825MHz For 802.11n-HT40/ac-VHT40: 5190~5230MHz, 5755~5795MHz For 802.11ac-VHT80: 5210MHz, 5775MHz Type of Modulation 802.11a/n/ac: OFDM Maximum Average Output Power with 5GHz Card #1 802.11a: 29.31dBm 802.11n-HT20: 29.19dBm 802.11n-HT40: 28.47dBm 802.11ac-VHT20: 29.29dBm 802.11ac-VHT40: 28.67dBm 802.11ac-VHT80: 20.85dBm Maximum Average Output Power with 5GHz Card #2 802.11a: 28.60dBm 802.11n-HT20: 28.52dBm 802.11n-HT40: 28.05dBm 802.11ac-VHT20: 28.58dBm 802.11ac-VHT40: 28.08dBm 802.11ac-VHT80: 14.30dBm Report No.: 1511RSU00202 FCC ID: 2AD6M-X20 Page Number: 4 of 6 1.2. Antenna Description Antenna Type Frequency Band (GHz) Tx Paths Max Peak Gain (dBi) Beam Forming Directional Gain (dBi) CDD Directional Gain (dBi) For Power For PSD Internal Antenna 5 2 18 21 18 21 External Antenna 5 2 20 23 20 23 1. The EUT supports Cyclic Delay Diversity (CDD) mode, and CDD signals are correlated. For CDD transmissions, directional gain is calculated as follows, N ANT = 2, N SS = 1. 1) If all antennas have the same gain, G ANT , Directional gain = G ANT + Array Gain, where Array Gain is as follows.  For power spectral density (PSD) measurements on all devices, Array Gain = 10 log (N ANT / N SS ) dB = 3.01;  For power measurements on IEEE 802.11 devices, Array Gain = 0 dB for N ANT ≤ 4; 2. The EUT supports Beam Forming technology for 802.11n/ac mode, and exclude 802.11a mode. Correlated signals include, but are not limited to, signals transmitted in any of the following modes: Any transmit Beam Forming mode, whether fixed or adaptive (e.g., phased array modes, closed loop MIMO modes, Transmitter Adaptive Antenna modes, Maximum Ratio Transmission (MRT) modes, and Statistical Eigen Beam Forming (EBF) modes).  All antennas have the same gain, GANT: Directional gain = GANT + 10 log(N ANT /N SS ) dBi, where N SS = the number of independent spatial streams of data and GANT is the antenna gain in dBi. Report No.: 1511RSU00202 FCC ID: 2AD6M-X20 Page Number: 5 of 6 2. RF Exposure Evaluation 2.1. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (Minutes) (A) Limits for Occupational/ Control Exposures 300-1500 -- -- f/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/ Uncontrolled Exposures 300-1500 -- -- f/1500 6 1500-100,000 -- -- 1 30 f= Frequency in MHz Calculation Formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 r = distance between observation point and center of the radiator in cm Pd is the limit of MPE, 1mW/cm². If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Report No.: 1511RSU00202 FCC ID: 2AD6M-X20 Page Number: 6 of 6 2.2. Test Result of RF Exposure Evaluation Product MeshRanger X20 Dual 5GHz 802.11ac Test Item RF Exposure Evaluation Antenna Gain refer to section 1.2 in this report. For 5GHz Card #1 UNII Band: Test Mode Frequency Band (MHz) Maximum Average Output Power (dBm) Limit (mW/cm 2 ) 802.11a/n-HT20/ n-H40/ac-VHT20 ac-VHT40/ac-VHT80 5180 ~ 5240 29.31 1 5745 ~ 5825 27.24 1 For 5GHz Card #2 UNII Band: Test Mode Frequency Band (MHz) Maximum Average Output Power (dBm) Limit (mW/cm 2 ) 802.11a/n-HT20/ n-H40/ac-VHT20 ac-VHT40/ac-VHT80 5180 ~ 5240 28.60 1 5745 ~ 5825 27.20 1 CONCULISON: Both of the WLAN 5GHz Card #1 Band and 5GHz Card #2 Band can transmit simultaneously. Therefore, the worst-case distance = √(10^ ((29.31dBm+21dBi)/10) + 10^ ((28.60dBm+23dBi)/10) )/ (4*pi) = 141.59cm. The Safety Distance of this equipment was 141.59cm. The End

MRT Technology (Suzhou) Co., Ltd Report No.: 1511RSU00203 Phone: +86-512-66308358 Report Version: V01 Fax: +86-512-66308368 Issue Date: 01-20-2016 Web: www.mrt-cert.com FCC ID: 2AD6M-X20 Page Number: 1 of 4 FCC ID: 2AD6M-X20 APPLICANT: P2 Mobile Technologies Limited Application Type: Certification Product: MeshRanger X20 Dual 5GHz 802.11ac Model No.: X20 FCC Classification: Unlicensed National Information Infrastructure (UNII) Test Date: January 08 ~ 19, 2016 Co-location Report Reviewed By : ( Robin Wu ) Approved By : ( Marlin Chen ) The test results relate only to the samples tested. This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.4-2014. Test results reported herein relate only to the item(s) tested. The test report shall not be reproduced except in full without the written approval of MRT Technology (Suzhou) Co., Ltd. Report No.: 1511RSU00203 FCC ID: 2AD6M-X20 Page Number: 2 of 4 Revision History Report No. Version Description Issue Date 1511RSU00203 Rev. 01 Initial report 01-20-2016 Report No.: 1511RSU00203 FCC ID: 2AD6M-X20 Page Number: 3 of 4 1. TEST RESULT of Radiated Emissions for Co-located Test Mode: 5GHz Card #1 + 5GHz Card #2 Transmit Test Site: AC1 Test Engineer: Roy Cheng Polarity: Horizontal Remark: There is the ambient noise within frequency range 9kHz~30MHz and 18GHz~40GHz, the permissible value is not show in the report. No Flag Mark Frequency (MHz) Measure Level (dBuV/m) Reading Level (dBuV) Over Limit (dB) Limit (dBuV/m) Factor (dB) Type 1 1629.000 40.415 48.118 -33.585 74.000 -7.703 PK 2 1629.020 34.955 42.658 -19.045 54.000 -7.703 AV 3 3133.500 38.034 39.628 -35.966 74.000 -1.594 PK 4 3133.520 28.930 30.524 -25.070 54.000 -1.593 AV 5 * 6906.645 46.566 40.013 -7.434 54.000 6.553 AV 6 6907.500 63.384 56.829 -10.616 74.000 6.555 PK Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB). Report No.: 1511RSU00203 FCC ID: 2AD6M-X20 Page Number: 4 of 4 Test Mode: 5GHz Card #1 + 5GHz Card #2 Transmit Test Site: AC1 Test Engineer: Roy Cheng Polarity: Vertical Remark: There is the ambient noise within frequency range 9kHz~30MHz and 18GHz~40GHz, the permissible value is not show in the report. No Flag Mark Frequency (MHz) Measure Level (dBuV/m) Reading Level (dBuV) Over Limit (dB) Limit (dBuV/m) Factor (dB) Type 1 2547.000 38.104 41.614 -35.896 74.000 -3.510 PK 2 2547.244 29.015 32.524 -24.985 54.000 -3.510 AV 3 3703.000 38.604 39.157 -35.396 74.000 -0.553 PK 4 3703.024 28.471 29.024 -25.529 54.000 -0.553 AV 5 * 6906.677 46.223 39.670 -7.777 54.000 6.553 AV 6 6907.500 61.558 55.003 -12.442 74.000 6.555 PK Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB). The End

MRT Technology (Suzhou) Co., Ltd Report No.: 1511RSU00201 Phone: +86-512-66308358 Report Version: V01 Fax: +86-512-66308368 Issue Date: 01-19-2016 Web: www.mrt-cert.com FCC ID: 2AD6M-X20 Page Number: 1 of 749 FCC ID: 2AD6M-X20 APPLICANT: P2 Mobile Technologies Limited Application Type: Certification Product: MeshRanger X20 Dual 5GHz 802.11ac Model No.: X20 FCC Classification: Unlicensed National Information Infrastructure (UNII) FCC Rule Part(s): Part 15.407 Test Procedure(s): KDB 789033 D02v01r01, KDB 662911 D01v02r01 KDB 644545 D03v01 Test Date: December 13, 2015 ~ January 16, 2016 MEASUREMENT REPORT FCC PART 15.407 WLAN 802.11a/n/ac Reviewed by : ( Robin Wu ) Approved by : ( Marlin Chen ) The test results relate only to the samples tested. This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in KDB 789033 D02v01r01. Test results reported herein relate only to the item(s) tested. The test report shall not be reproduced except in full without the written approval of MRT Technology (Suzhou) Co., Ltd. Report No.: 1511RSU00201 FCC ID: 2AD6M-X20 Page Number: 2 of 749 Revision History Report No. Version Description Issue Date 1511RSU00201 Rev. 01 Draft report 01-19-2016 Report No.: 1511RSU00201 FCC ID: 2AD6M-X20 Page Number: 3 of 749 CONTENTS Description Page §2.1033 General Information ......................................................................................................... 6 1. INTRODUCTION ..................................................................................................................... 7 1.1. Scope ........................................................................................................................... 7 1.2. MRT Test Location ....................................................................................................... 7 2. PRODUCT INFORMATION ..................................................................................................... 8 2.1. Equipment Description .................................................................................................. 8 2.2. Frequency / Channel Operation .................................................................................... 9 2.3. Description of Available Antennas ............................................................................... 10 2.4. Description of Antenna RF Port.................................................................................... 11 2.5. Test Mode................................................................................................................... 12 2.6. Test Software .............................................................................................................. 12 2.7. Device Capabilities ..................................................................................................... 13 2.8. Test Configuration ...................................................................................................... 15 2.9. EMI Suppression Device(s)/Modifications ................................................................... 15 2.10. Labeling Requirements ............................................................................................... 16 3. DESCRIPTION OF TEST ...................................................................................................... 17 3.1. Evaluation Procedure ................................................................................................. 17 3.2. AC Line Conducted Emissions.................................................................................... 17 3.3. Radiated Emissions .................................................................................................... 18 4. ANTENNA REQUIREMENTS ................................................................................................ 19 5. TEST EQUIPMENT CALIBRATION DATE ............................................................................ 20 6. MEASUREMENT UNCERTAINTY ......................................................................................... 21 7. TEST RESULT ...................................................................................................................... 22 7.1. Summary .................................................................................................................... 22 7.2. 26dB Bandwidth Measurement ................................................................................... 24 7.2.1. Test Limit .................................................................................................................... 24 7.2.2. Test Procedure used ................................................................................................... 24 7.2.3. Test Setting ................................................................................................................. 24 7.2.4. Test Setup .................................................................................................................. 24 7.2.5. Test Result .................................................................................................................. 25 7.3. 6dB Bandwidth Measurement ..................................................................................... 61 7.3.1. Test Limit .................................................................................................................... 61 7.3.2. Test Procedure used ................................................................................................... 61 Report No.: 1511RSU00201 FCC ID: 2AD6M-X20 Page Number: 4 of 749 7.3.3. Test Setting ................................................................................................................. 61 7.3.4. Test Setup ......................................................................................................…

Text truncated - open the document above for the full version.

Report No.: 1511RSU00201 FCC ID: 2AD6M-X20 Page Number: 38 of 749 802.11n-HT40 26dB Bandwidth & 99% Bandwidth - Ant 2 Channel 38 (5190MHz) Channel 46 (5230MHz) Channel 151 (5755 MHz) Channel 159 (5795 MHz) Report No.: 1511RSU00201 FCC ID: 2AD6M-X20 Page Number: 39 of 749 802.11ac-VHT20 26dB Bandwidth & 99% Bandwidth - Ant 2 Channel 36 (5180MHz) Channel 44 (5220MHz) Channel 48 (5240MHz) Channel 149 (5745MHz) Channel 157 (5785MHz) Channel 165 (5825MHz) Report No.: 1511RSU00201 FCC ID: 2AD6M-X20 Page Number: 40 of 749 802.11ac-VHT40 26dB Bandwidth & 99% Bandwidth - Ant 2 Channel 38 (5190MHz) Channel 46 (5230MHz) Channel 151(5755MHz) Channel 159(5795MHz) 802.11ac-VHT80 26dB Bandwidth & 99% Bandwidth - Ant 2 Channel 42 (5210MHz) Channel 155 (5775MHz) Report No.: 1511RSU00201 FCC ID: 2AD6M-X20 Page Number: 41 of 749 802.11a 26dB Bandwidth & 99% Bandwidth - Ant 1 / Ant 1 + 2 Channel 36 (5180MHz) Channel 44 (5220MHz) Channel 48 (5240MHz) Channel 149 (5745MHz) Channel 157 (5785MHz) Channel 165 (5825MHz) Report No.: 1511RSU00201 FCC ID: 2AD6M-X20 Page Number: 42 of 749 802.11n-HT20 26dB Bandwidth & 99% Bandwidth - Ant 1 / Ant 1 + 2 Channel 36 (5180MHz) Channel 44 (5220MHz) Channel 48 (5240MHz) Channel 149 (5745MHz) Channel 157 (5785MHz) Channel 165 (5825MHz) Report No.: 1511RSU00201 FCC ID: 2AD6M-X20 Page Number: 43 of 749 802.11n-HT40 26dB Bandwidth & 99% Bandwidth - Ant 1 / Ant 1 + 2 Channel 38 (5190MHz) Channel 46 (5230MHz) Channel 151 (5755 MHz) Channel 159 (5795 MHz) Report No.: 1511RSU00201 FCC ID: 2AD6M-X20 Page Number: 44 of 749 802.11ac-VHT20 26dB Bandwidth & 99% Bandwidth - Ant 1 / Ant 1 + 2 Channel 36 (5180MHz) Channel 44 (5220MHz) Channel 48 (5240MHz) Channel 149 (5745MHz) Channel 157 (5785MHz) Channel 165 (5825MHz) Report No.: 1511RSU00201 FCC ID: 2AD6M-X20 Page Number: 45 of 749 802.11ac-VHT40 26dB Bandwidth & 99% Bandwidth - Ant 1 / Ant 1 + 2 Channel 38 (5190MHz) Channel 46 (5230MHz) Channel 151(5755MHz) Channel 159(5795MHz) 802.11ac-VHT80 26dB Bandwidth & 99% Bandwidth - Ant 1 / Ant 1 + 2 Channel 42 (5210MHz) Channel 155 (5775MHz) Report No.: 1511RSU00201 FCC ID: 2AD6M-X20 Page Number: 46 of 749 5GHz Card #2 802.11a 26dB Bandwidth & 99% Bandwidth - Ant 1 Channel 36 (5180MHz) Channel 44 (5220MHz) Channel 48 (5240MHz) Channel 149 (5745MHz) Channel 157 (5785MHz) Channel 165 (5825MHz) Report No.: 1511RSU00201 FCC ID: 2AD6M-X20 Page Number: 47 of 749 802.11n-HT20 26dB Bandwidth & 99% Bandwidth - Ant 1 Channel 36 (5180MHz) Channel 44 (5220MHz) Channel 48 (5240MHz) Channel 149 (5745MHz) Channel 157 (5785MHz) Channel 165 (5825MHz) Report No.: 1511RSU00201 FCC ID: 2AD6M-X20 Page Number: 48 of 749 802.11n-HT40 26dB Bandwidth & 99% Bandwidth - Ant 1 Channel 38 (5190MHz) Channel 46 (5230MHz) Channel 151 (5755MHz) Channel 159 (5795MHz)

Report No.: 1511RSU00201 FCC ID: 2AD6M-X20 Page Number: 49 of 749 802.11ac-VHT20 26dB Bandwidth & 99% Bandwidth - Ant 1 Channel 36 (5180MHz) Channel 44 (5220MHz) Channel 48 (5240MHz) Channel 149 (5745MHz) Channel 157 (5785MHz) Channel 165 (5825MHz) Report No.: 1511RSU00201 FCC ID: 2AD6M-X20 Page Number: 50 of 749 802.11ac-VHT40 26dB Bandwidth & 99% Bandwidth - Ant 1 Channel 38 (5190MHz) Channel 46 (5230MHz) Channel 151 (5755MHz) Channel 159 (5795MHz) 802.11ac-VHT80 26dB Bandwidth & 99% Bandwidth - Ant 1 Channel 42 (5210MHz) Channel 155 (5775MHz) Report No.: 1511RSU00201 FCC ID: 2AD6M-X20 Page Number: 51 of 749 802.11a 26dB Bandwidth & 99% Bandwidth - Ant 2 Channel 36 (5180MHz) Channel 44 (5220MHz) Channel 48 (5240MHz) Channel 149 (5745MHz) Channel 157 (5785MHz) Channel 165 (5825MHz) Report No.: 1511RSU00201 FCC ID: 2AD6M-X20 Page Number: 52 of 749 802.11n-HT20 26dB Bandwidth & 99% Bandwidth - Ant 2 Channel 36 (5180MHz) Channel 44 (5220MHz) Channel 48 (5240MHz) Channel 149 (5745MHz) Channel 157 (5785MHz) Channel 165 (5825MHz) Report No.: 1511RSU00201 FCC ID: 2AD6M-X20 Page Number: 53 of 749 802.11n-HT40 26dB Bandwidth & 99% Bandwidth - Ant 2 Channel 38 (5190MHz) Channel 46 (5230MHz) Channel 151 (5755 MHz) Channel 159 (5795 MHz) Report No.: 1511RSU00201 FCC ID: 2AD6M-X20 Page Number: 54 of 749 802.11ac-VHT20 26dB Bandwidth & 99% Bandwidth - Ant 2 Channel 36 (5180MHz) Channel 44 (5220MHz) Channel 48 (5240MHz) Channel 149 (5745MHz) Channel 157 (5785MHz) Channel 165 (5825MHz) Report No.: 1511RSU00201 FCC ID: 2AD6M-X20 Page Number: 55 of 749 802.11ac-VHT40 26dB Bandwidth & 99% Bandwidth - Ant 2 Channel 38 (5190MHz) Channel 46 (5230MHz) Channel 151(5755MHz) Channel 159(5795MHz) 802.11ac-VHT80 26dB Bandwidth & 99% Bandwidth - Ant 2 Channel 42 (5210MHz) Channel 155 (5775MHz) Report No.: 1511RSU00201 FCC ID: 2AD6M-X20 Page Number: 56 of 749 802.11a 26dB Bandwidth & 99% Bandwidth - Ant 1 / Ant 1 + 2 Channel 36 (5180MHz) Channel 44 (5220MHz) Channel 48 (5240MHz) Channel 149 (5745MHz) Channel 157 (5785MHz) Channel 165 (5825MHz) Report No.: 1511RSU00201 FCC ID: 2AD6M-X20 Page Number: 57 of 749 802.11n-HT20 26dB Bandwidth & 99% Bandwidth - Ant 1 / Ant 1 + 2 Channel 36 (5180MHz) Channel 44 (5220MHz) Channel 48 (5240MHz) Channel 149 (5745MHz) Channel 157 (5785MHz) Channel 165 (5825MHz) Report No.: 1511RSU00201 FCC ID: 2AD6M-X20 Page Number: 58 of 749 802.11n-HT40 26dB Bandwidth & 99% Bandwidth - Ant 1 / Ant 1 + 2 Channel 38 (5190MHz) Channel 46 (5230MHz) Channel 151 (5755 MHz) Channel 159 (5795 MHz) Report No.: 1511RSU00201 FCC ID: 2AD6M-X20 Page Number: 59 of 749 802.11ac-VHT20 26dB Bandwidth & 99% Bandwidth - Ant 1 / Ant 1 + 2 Channel 36 (5180MHz) Channel 44 (5220MHz) Channel 48 (5240MHz) Channel 149 (5745MHz) Channel 157 (5785MHz) Channel 165 (5825MHz)

Report No.: 1511RSU00201 FCC ID: 2AD6M-X20 Page Number: 60 of 749 802.11ac-VHT40 26dB Bandwidth & 99% Bandwidth - Ant 1 / Ant 1 + 2 Channel 38 (5190MHz) Channel 46 (5230MHz) Channel 151(5755MHz) Channel 159(5795MHz) 802.11ac-VHT80 26dB Bandwidth & 99% Bandwidth - Ant 1 / Ant 1 + 2 Channel 42 (5210MHz) Channel 155 (5775MHz) Report No.: 1511RSU00201 FCC ID: 2AD6M-X20 Page Number: 61 of 749 7.3. 6dB Bandwidth Measurement 7.3.1. Test Limit The minimum 6dB bandwidth shall be at least 500 kHz. 7.3.2. Test Procedure used KDB 789033 D02v01r01 - Section C.2 7.3.3. Test Setting 1. Set center frequency to the nominal EUT channel center frequency. 2. RBW = 100 kHz. 3. VBW ≥ 3 × RBW. 4. Detector = Peak. 5. Trace mode = max hold. 6. Sweep = auto couple. 7. Allow the trace to stabilize. 8. Measure the maximum width of the emission that is constrained by the frequencies associated with the two outermost amplitude points (upper and lower frequencies) that are attenuated by 6 dB relative to the maximum level measured in the fundamental emission. 7.3.4. Test Setup Report No.: 1511RSU00201 FCC ID: 2AD6M-X20 Page Number: 62 of 749 7.3.5. Test Result 5GHz Card #1 Test Mode Data Rate (Mbps) Channel No. Frequency (MHz) 6dB Bandwidth (MHz) Limit (MHz) Result Ant 1 802.11a 6 149 5745 16.42 ≥ 0.5 Pass 802.11a 6 157 5785 16.37 ≥ 0.5 Pass 802.11a 6 165 5825 16.35 ≥ 0.5 Pass 802.11n-HT20 6.5 149 5745 17.63 ≥ 0.5 Pass 802.11n-HT20 6.5 157 5785 17.58 ≥ 0.5 Pass 802.11n-HT20 6.5 165 5825 17.20 ≥ 0.5 Pass 802.11n-HT40 13.5 151 5755 36.40 ≥ 0.5 Pass 802.11n-HT40 13.5 159 5795 35.83 ≥ 0.5 Pass 802.11ac-VHT20 6.5 149 5745 17.63 ≥ 0.5 Pass 802.11ac-VHT20 6.5 157 5785 17.58 ≥ 0.5 Pass 802.11ac-VHT20 6.5 165 5825 17.34 ≥ 0.5 Pass 802.11ac-VHT40 13.5 151 5755 36.40 ≥ 0.5 Pass 802.11ac-VHT40 13.5 159 5795 35.83 ≥ 0.5 Pass 802.11ac-VHT80 29.3 155 5775 74.32 ≥ 0.5 Pass Ant 2 802.11a 6 149 5745 16.36 ≥ 0.5 Pass 802.11a 6 157 5785 16.34 ≥ 0.5 Pass 802.11a 6 165 5825 16.36 ≥ 0.5 Pass 802.11n-HT20 6.5 149 5745 17.34 ≥ 0.5 Pass 802.11n-HT20 6.5 157 5785 17.58 ≥ 0.5 Pass 802.11n-HT20 6.5 165 5825 17.56 ≥ 0.5 Pass 802.11n-HT40 13.5 151 5755 35.83 ≥ 0.5 Pass 802.11n-HT40 13.5 159 5795 35.80 ≥ 0.5 Pass 802.11ac-VHT20 6.5 149 5745 17.34 ≥ 0.5 Pass 802.11ac-VHT20 6.5 157 5785 17.22 ≥ 0.5 Pass 802.11ac-VHT20 6.5 165 5825 17.59 ≥ 0.5 Pass 802.11ac-VHT40 13.5 151 5755 35.98 ≥ 0.5 Pass 802.11ac-VHT40 13.5 159 5795 35.84 ≥ 0.5 Pass 802.11ac-VHT80 29.3 155 5775 73.33 ≥ 0.5 Pass Report No.: 1511RSU00201 FCC ID: 2AD6M-X20 Page Number: 63 of 749 Test Mode Data Rate (Mbps) Channel No. Frequency (MHz) 6dB Bandwidth (MHz) Limit (MHz) Result Ant 1 / Ant 1 + 2 802.11a 6 149 5745 16.39 ≥ 0.5 Pass 802.11a 6 157 5785 16.40 ≥ 0.5 Pass 802.11a 6 165 5825 16.32 ≥ 0.5 Pass 802.11n-HT20 6.5 149 5745 17.62 ≥ 0.5 Pass 802.11n-HT20 6.5 157 5785 17.58 ≥ 0.5 Pass 802.11n-HT20 6.5 165 5825 17.34 ≥ 0.5 Pass 802.11n-HT40 13.5 151 5755 36.40 ≥ 0.5 Pass 802.11n-HT40 13.5 159 5795 35.82 ≥ 0.5 Pass 802.11ac-VHT20 6.5 149 5745 17.64 ≥ 0.5 Pass 802.11ac-VHT20 6.5 157 5785 17.58 ≥ 0.5 Pass 802.11ac-VHT20 6.5 165 5825 16.94 ≥ 0.5 Pass 802.11ac-VHT40 13.5 151 5755 36.41 ≥ 0.5 Pass 802.11ac-VHT40 13.5 159 5795 35.79 ≥ 0.5 Pass 802.11ac-VHT80 29.3 155 5775 73.36 ≥ 0.5 Pass Report No.: 1511RSU00201 FCC ID: 2AD6M-X20 Page Number: 64 of 749 5GHz Card #2 Test Mode Data Rate (Mbps) Channel No. Frequency (MHz) 6dB Bandwidth (MHz) Limit (MHz) Result Ant 1 802.11a 6 149 5745 16.35 ≥ 0.5 Pass 802.11a 6 157 5785 16.33 ≥ 0.5 Pass 802.11a 6 165 5825 16.34 ≥ 0.5 Pass 802.11n-HT20 6.5 149 5745 17.56 ≥ 0.5 Pass 802.11n-HT20 6.5 157 5785 17.53 ≥ 0.5 Pass 802.11n-HT20 6.5 165 5825 17.18 ≥ 0.5 Pass 802.11n-HT40 13.5 151 5755 36.08 ≥ 0.5 Pass 802.11n-HT40 13.5 159 5795 35.77 ≥ 0.5 Pass 802.11ac-VHT20 6.5 149 5745 17.58 ≥ 0.5 Pass 802.11ac-VHT20 6.5 157 5785 16.91 ≥ 0.5 Pass 802.11ac-VHT20 6.5 165 5825 17.30 ≥ 0.5 Pass 802.11ac-VHT40 13.5 151 5755 36.09 ≥ 0.5 Pass 802.11ac-VHT40 13.5 159 5795 35.60 ≥ 0.5 Pass 802.11ac-VHT80 29.3 155 5775 73.09 ≥ 0.5 Pass Ant 2 802.11a 6 149 5745 16.34 ≥ 0.5 Pass 802.11a 6 157 5785 16.30 ≥ 0.5 Pass 802.11a 6 165 5825 16.34 ≥ 0.5 Pass 802.11n-HT20 6.5 149 5745 17.54 ≥ 0.5 Pass 802.11n-HT20 6.5 157 5785 16.94 ≥ 0.5 Pass 802.11n-HT20 6.5 165 5825 16.93 ≥ 0.5 Pass 802.11n-HT40 13.5 151 5755 35.82 ≥ 0.5 Pass 802.11n-HT40 13.5 159 5795 35.75 ≥ 0.5 Pass 802.11a…

Text truncated - open the document above for the full version.