2ADHZ-X100WCDMA/GSM(GPRS) Dual-Mode Digital Mobile Phone

Moxee X100 Quick Guide - 2 - INTRODUCTION Thanks for choosing the smart phone, Dual SIMs Android smart phone based on 1.3 GHzDual-Core Processor. This smart phone is running on Android OS, v4.4. If you’d like your phone to live a long and fruitful life, please read this guide carefully and keep it for future reference. You never know when you might need it. And don’t worry if the pictures we use to demonstrate your phone’s functions look a little different from what you see on its screen. It’s the functions that matter. * The Manufacturer reserves the right for the changes in the manual without advanced notice. - 3 - Safety Safety Precautions Please read through the following briefings carefully, and act in accordance with these rules, so as to prevent causing any danger or violating any law. Information about the meaning of Logo WEEE (Waste Electrical and Electronic Equipment): The WEEE logo on the product or on its box indicates that this product must not be disposed of or dumped with your other household waste. You are liable to dispose of all your electronic or electrical waste equipment by relocating over to the specified collection point for recycling of such hazardous waste. Isolated collection and proper recovery of your electronic and electrical waste equipment at the time of disposal will allow us to help conserving natural resources. Moreover, proper recycling of the electronic and electrical waste equipment will ensure safety of human health and environment. Caution: risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible. Using your phone safely On The Road Using a phone while driving is illegal in many countries. Please follow local laws and drive safely at all times. Near Sensitive Electronics Don’t use your phone near sensitive electronic equipment – - 4 - particularly medical devices such as pacemakers – as it could cause them to malfunction. It can also interfere with the operation of fire detectors and other automatic-control equipment. For more information about how your phone affects pacemakers or other electronic equipment, please contact the manufacturer or your local distributor. Your phone may cause interference when used near TVs, radios or automated office equipment. While Flying Your phone can cause interference with aircraft equipment. So it’s essential you follow airline regulations. And if airline personnel ask you to switch off your phone, or disable its wireless functions, please do as they say. In Hospital Your phone may interfere with the normal operation of medical equipment. Follow all hospital regulations and turn it off when you’re asked to by posted warnings or medical staff. At a Petrol Station Don’t use your phone at petrol stations. In fact, it’s always best to switch off whenever you’re near fuels, chemicals or explosives. Around Water Keep your phone away from water (or any other liquid). It’s not a waterproof model. Making Repairs Never take your phone apart. Please leave that to the professionals. Unauthorized repairs could break the terms of your warranty. Broken Antenna Don’t use your phone if the antenna is damaged, as it could cause injury. - 5 - Around Children Keep your mobile out of children’s reach. It should never be used as a toy and it might not be good for their health. Original Accessories Only use the original accessories supplied with your phone or those approved by the manufacturer. Using unapproved accessories may affect performance, make the warranty void, break national regulations on the use of mobile phones, or even cause injury. Near Explosives Turn off your phone in or near areas where explosive materials are used. Always obey local laws and turn off your phone when requested. Emergency Calls To make an emergency call your phone must be turned on and in an area where there’s network coverage. Dial the national emergency number and press ‘send’. Explain exactly where you are and don’t hang up until help has arrived. Working Temperature The working temperature for the phone is between 0 Degree and 40 Degree Celsius. Please don’t use the phone outside the range. Using the phone under too high or too low temperature might cause problems. To prevent possible hearing damage, do not listen at high volume levels for long periods. FCC Compliance This device complies with part 15 of the FCC Rules. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, - 6 - INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.Operation is subject to the condition that this device does not cause harmful interference. Caution: Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. Note:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an …

Text truncated - open the document above for the full version.

Declaration Letter WCDMA/GSM（GPRS） Dual-Mode Digital Mobile Phone X100,supporting WCDMA band II and IV, and GSM Quad band, is made by Moxee Technologies. This model don’t support country code,WiFi don’t support channel 12 and 13. Moxee Technologies

THIS MUST BE SIGNED BY TI{E APPLICANT AND SHOULD BE PLACED ON APPLICANTS LETTERHEAD ONLY IF AGENT IS SUBMITTING APPLICATION Authority to Act as Agent Date: 201411212 American Certification Body, Inc. 6731 Whittier Avenue suite c110 Mclean, Y A 22101 To Whom It May Concern: By: "oot t-t,'t'o ttt"tltutc or r elecommunlcatlons / I ina GonL is authorized to act on our behalf, until otherwise notified, for applications to American c..tin*tion Body, Inc. (ACB). t to denial of federal benefits, that includes FCC benefits, pursuant to buse Act of 1988, 2l u.s.c. g62. Further, no party,as defined in 47 n is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: 12 months (Print name) Phillips, Mr. Joseph Title: On behalf of: Telephone: ' - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 022311 -6 Moxee Technologies (Company Name) (42s)890-7897

THIS MUST BE SIGNED BY TFIE APPLICANT/AGENT AND SHOULD BE PLACED ON APPROPzuATE LETTERHEAD Request for Confidentialifv Date: 201411212 Subject: Confi dentiality Request for: 2ADHZ_Xl00 Pursuant to FCC 47 cRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested l_J Short Term I permanent ! Shor term ! Short Term ! Short term ! Short Term ! Short Term ! Short term I Short term ! Short Term n Permanent*2 I Permanent I Permanent I Permanent I Permanent ! Permanent* Exhibit Block Diagrams Extemal Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos User's Manual *Note: Micron Electronics LLC. has spent substantial effort in developing this product and it is one of the first of its kind in industry' Having the subject information easily available to "comp"etition" would negate the advantage they have achieved by developing this product. Not protecting the details oithe oesign will result in financial hardshio. Permanent Confi dentiatity: The applicant requests the exhibits listed above as perrnanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confi dentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a ^ days from the date of the Grant of Equipment re release of sensitive information prior to marketing that they are responsible to notify ACB in the event vailable to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC public Notice DA 04-1705. NOTE for Industry Canada Applications: - Must be signed by applicant contact given for applicant on the FCC site, or by the author ized agentifan appropriate authorized agent lefter has been provided. Letters should be placed on appropriate letterhead. 022311 -6 The applicant understands that until such time that IC distinguishes between Short Term and permanent confidentiality' eith{type of marked exhibit above will simpty be marked confidential when submitted to IC. Sincerely, By: Phillips, Mr. Joseph (Print name) '- T:,,?::*5::,'Ii:J?i:q::1" *g11stilc1tion.\rore..oeryalenrconfidentialiry wiu be anowed. rhese arso currently ::11,T:.f:t"Y.Y*.i9: y9"1111"to,1:'-it-But-Ask policy before the grant is iszued and can delay completion of an lrvu uI 4tl 3l?*:'*l; Turtherjustification should be.added to the .rote above. one such example for a potred device would be: .,The :5::iyt-::l?1:_1i,:i'c a non-removable epoxy based material. Removal;ifi;d;;5.iur "uur., irreparable *f:l::: l"."yt 1|cyitrr. See,photographs exhibits that outline the device before anJafter poning.,, Please refer to htto: -Term-V f for complete details.

External photo: Mobile phone Mobile phone Mobile phone Mobile phone Mobile phone battery battery charger charger Charger Label of travel charger Data cable Earphone

Label&Location:

55.40`0.10 1.40 1.50 10.50 1.40 62.45 ` 0.10 MODEL:X100 COLOR:White GSM:850/900/1800/1900Mhz WCDMA:1700/1900Mhz IMEI-1:123456789012345 MADE IN CHINA IMEI-2:123456789012345 55.40`0.10 1.40 1.50 10.50 1.40 62.45 ` 0.10 材质：50#合成纸，过哑胶. 尺寸：55.40X62.45mm 工艺：一色印刷。 公差：±0.1mm 量产阶段打印示意供应商打印示意 FCC ID:2ADHZ–X100

Internal photo

©Copyright. All rights reserved by CTTL. SAR TEST REPORT No. I14Z48054-SEM01 For Moxee Technologies WCDMA/GSM（GPRS）Dual-Mode Digital Mobile Phone Model name: X100 With Hardware WM4M32A1 Software Version: MOXEE_X100_V1.0 FCC ID: 2ADHZ–X100 Issued Date: 2014-12-11 Note: The test results in this test report relate only to the devices specified in this report.This report shall not be reproduced except in full without the written approval of CTTL. Test Laboratory: CTTL, Telecommunication Technology Labs, Academy of Telecommunication Research, MIIT No.52, HuayuanNorth Road, Haidian District, Beijing, P. R. China 100191. Tel:+86(0)10-62304633-2512,Fax:+86(0)10-62304633-2504 Email:[email protected] , website:www.chinattl.com TESTING CNAS L0570 No. I14Z48054-SEM01 Page 2 of 126 ©Copyright. All rights reserved by CTTL. REPORT HISTORY Report Number RevisionIssue Date Description I14Z48054-SEM01 Rev.0 2014-12-01 Initial creation of test report I14Z48054-SEM01 Rev.1 2014-12-11 Update the Manufacturer Information in section 3.2 on page 7 No. I14Z48054-SEM01 Page 3 of 126 ©Copyright. All rights reserved by CTTL. TABLE OF CONTENT 1 TEST LABORATORY ................................................................................................................. 5 1.1 TESTING LOCATION ........................................................................................................................................ 5 1.2 TESTING ENVIRONMENT ................................................................................................................................. 5 1.3 PROJECT DATA ............................................................................................................................................... 5 1.4 SIGNATURE ..................................................................................................................................................... 5 2 STATEMENT OF COMPLIANCE ................................................................................................ 6 3 CLIENT INFORMATION.............................................................................................................. 7 3.1 APPLICANT INFORMATION .............................................................................................................................. 7 3.2 MANUFACTURER INFORMATION ..................................................................................................................... 7 4 EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ................................ 8 4.1 ABOUT EUT ................................................................................................................................................... 8 4.2 INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST .......................................................................... 8 4.3 INTERNAL IDENTIFICATION OF AE USED DURING THE TEST ............................................................................. 8 5 TEST METHODOLOGY .............................................................................................................. 9 5.1 APPLICABLE LIMIT REGULATIONS .................................................................................................................. 9 5.2 APPLICABLE MEASUREMENT STANDARDS ...................................................................................................... 9 6 SPECIFIC ABSORPTION RATE (SAR) .................................................................................... 10 6.1 INTRODUCTION ............................................................................................................................................. 10 6.2 SAR DEFINITION .......................................................................................................................................... 10 7 TISSUE SIMULATING LIQUIDS ............................................................................................... 11 7.1 TARGETS FOR TISSUE SIMULATING LIQUID .................................................................................................... 11 7.2 DIELECTRIC PERFORMANCE ......................................................................................................................... 11 8 SYSTEM VERIFICATION .......................................................................................................... 16 8.1 SYSTEM SETUP ............................................................................................................................................. 16 8.2 SYSTEM VERIFICATION ................................................................................................................................. 17 9 MEASUREMENT PROCEDURES ............................................................................................ 18 9.1 TESTS TO BE PERFORMED ............................................................................................................................. 18 9.2 GENERAL MEASUREMENT PROCEDURE ........................................................................................................ 19 9.3 WCDMA MEASUREMENT PROCEDURES FOR SAR ...................................................................................... 20 9.4 BLUETOOTH & WI-FI MEASUREMENT PROCEDURES FOR SAR .................................................................... 21 9.5 POWER DRIFT ............................................................................................................................................... 22 10 AREA SCAN BASED 1-G SAR .............................................................................................. 22 10.1 REQUIREMENT OF KDB .............................................................................................................................. 22 10.2 FAST SAR ALGORITHMS .................................................................................................................…

Text truncated - open the document above for the full version.

Full TEST REPORT No. I14D00036-RFA For Client : Moxee Technologies Production : WCDMA/GSM（GPRS） Dual-Mode Digital Mobile Phone Model Name : X100 FCC ID: 2ADHZ–X100 Hardware Version: WM4M32A1 Software Version: MOXEE_X100_V1.0 Issued date: 2014-12-02 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of ECIT Shanghai. Test Laboratory: ECIT Shanghai, East China Institute of Telecommunications Add: 7-8F, G Area, No.668, Beijing East Road, Huangpu District, Shanghai, P. R. China Tel: (+86)-021-63843300, E-Mail: [email protected] RF Test Report Report No.: I14D00036-RFA East China Institute of Telecommunications Page Number : 2of 78 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date : Dec 02. 2014 Revision Version Report Number Revision Date Memo I14D00036-RFA 00 2014-12-02 Initial creation of test report RF Test Report Report No.: I14D00036-RFA East China Institute of Telecommunications Page Number : 3of 78 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date : Dec 02. 2014 CONTENTS 1. TEST LABORATORY ............................................................................................................... 5 1.1. TESTING LOCATION ............................................................................................................... 5 1.2. TESTING ENVIRONMENT ....................................................................................................... 5 1.3. PROJECT DATA ....................................................................................................................... 5 1.4. SIGNATURE ............................................................................................................................. 5 2. CLIENT INFORMATION ........................................................................................................... 6 2.1. APPLICANT INFORMATION ................................................................................................... 6 2.2. MANUFACTURER INFORMATION ......................................................................................... 6 3. EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ............................ 7 3.1. ABOUT EUT ............................................................................................................................. 7 3.2. INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST ....................................... 7 3.3. INTERNAL IDENTIFICATION OF AE USED DURING THE TEST ......................................... 7 3.4. STATEMENTS........................................................................................................................... 8 4. REFERENCE DOCUMENTS .................................................................................................... 9 4.1. REFERENCE DOCUMENTS FOR TESTING .......................................................................... 9 5. SUMMARY OF TEST RESULTS ............................................................................................ 10 6. TEST EQUIPMENTS UTILIZED ............................................................................................. 11 7. TEST ENVIRONMENT ........................................................................................................... 13 ANNEX A. MEASUREMENT RESULTS .................................................................................... 15 ANNEX A.1. OUTPUT POWER (§22.913(A)/§24.232(C)) ........................................................... 15 ANNEX A.2. 99%OCCUPIED BANDWIDTH (§2.1049(H)(I)) ....................................................... 17 ANNEX A.3. -26DB EMISSION BANDWIDTH(§22.917(B)/§24.238(B)) ..................................... 29 ANNEX A.4. BAND EDGE AT ANTENNA TERMINALS(§22.917(B)/§24.238(B)) ...................... 40 ANNEX A.5. FREQUENCY STABILITY (§2.1055/§24.235) ......................................................... 47 ANNEX A.6. CONDUCTED SPURIOUS EMISSION .................................................................... 52 RF Test Report Report No.: I14D00036-RFA East China Institute of Telecommunications Page Number : 4of 78 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date : Dec 02. 2014 ANNEX A.7. RADIATED................................................................................................................ 67 ANNEX B. DEVIATIONS FROM PRESCRIBED TEST METHODS .......................................... 78 RF Test Report Report No.: I14D00036-RFA East China Institute of Telecommunications Page Number : 5of 78 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date : Dec 02. 2014 1. Test Laboratory 1.1. Testing Location Company Name: ECIT Shanghai, East China Institute of Telecommunications Address: 7-8F, G Area,No. 668, Beijing East Road, Huangpu District, Shanghai, P. R. China Postal Code: 200001 Telephone: (+86)-021-63843300 Fax: (+86)-021-63843301 1.2. Testing Environment Normal Temperature: 15-35°C Extreme Temperature: -10/+55°C Relative Humidity: 20-75% 1.3. Project data Project Leader: Gong Yujuan Testing Start Date: 2014-11-03 Testing End Date: 2014-11-27 1.4. Signature RF Test Report Report No.: I14D00036-RFA East China Institute of Telecommunications Page Number : 6of 78 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date : Dec 02. 2014 2. Client Information 2.1. Applicant Information Company Name: Moxee Technologies Address: 10900 NE 8th Street, #1000 Country USA Telephone: 425-890-7897 2.2. Manufacturer Information Company Name: Moxee Technologies Address: 10900 NE 8th Street, #1000 Country USA Telephone: 425-890-7897 RF Test Report Report No.: I14D00036-RFA East China Institute of Telecommunications Page Number : 7of 78 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date : Dec 02. 2014 3. Equipment Under Test (EUT) and Ancillary Equipment (AE) 3.1. About EUT EUT Description WCDMA/GSM（GPRS） Dual-Mode D…

Text truncated - open the document above for the full version.

FCC Part 22H-Test Photograph Description: ERP Test Setup 1 Description: Substitution Antenna for ERP Test 14 Description: EIRP Test Setup Description: Substitution Antenna for EIRP Test Test Photograph Test Mode: Mode 2 Description: Conducted Emission Test Setup Test Mode: Mode 1 Description: Front View of Conducted Emission Test Setup Test Mode: Mode 1 Description: Side View of Conducted Emission Test Setup Test Mode: Mode 2 Description: Front view of Radiated Emission Test Setup Test Mode: Mode 2 Description: Back view of Radiated Emission Test Setup Test Mode: Mode 1 Description: Front view of Radiated Emission Test Setup Test Mode: Mode 1 Description: Back view of Radiated Emission Test Setup

©Copyright. All rights reserved by CTTL. The Photos of SAR test No. I14Z48054-SEM01 For Moxee Technologies WCDMA/GSM（GPRS）Dual-Mode Digital Mobile Phone Model name: X100 With Hardware WM4M32A1 Software Version: MOXEE_X100_V1.0 FCC ID: 2ADHZ–X100 Issued Date: 2014-12-01 Note: The test results in this test report relate only to the devices specified in this report.This report shall not be reproduced except in full without the written approval of CTTL. Test Laboratory: CTTL, Telecommunication Technology Labs, Academy of Telecommunication Research, MIIT No.52, HuayuanNorth Road, Haidian District, Beijing, P. R. China 100191. Te l:+86(0)10-62304633-2512,Fax:+86(0)10-62304633-2504 Email: [email protected], website:www.chinattl.com TESTING CNAS L0570 Picture 1: Constituents of the sample Picture 2: Left Hand Touch Cheek Position Picture 3: Left Hand Tilt 15° Position Picture 4: Right Hand Touch Cheek Position Picture 5: Right Hand Tilt 15° Position Test positions for body: The Body SAR is tested at the following 6 test positions all with the distance =10mm between the EUT and the phantom bottom: Picture 6: Front Picture 7: Rear Picture 7-1: Rear with Headset Picture 8: Left Edge Picture 9: Right Edge Picture 10: Bottom Edge Picture 11: Top Edge