2ADLSWLSP-MT01Smart Contact Sensor

Smart Contact Sensor FOR WL-ZSPDBPW-MT-01 User Manual ©Nanjing IOT Sensor Technology Co., Ltd. Publication Number: 2015-0407.V01 Federal Communications Commission (FCC) Compliance Notice: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: ●Reorient or relocate the receiving antenna. ●Increase the separation between the equipment and receiver. ●Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ●Consult the dealer or an experienced radio/TV technician for help. Federal Communications Commission (FCC) Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Federal Communications Commission (FCC) Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm during normal operation. ● 是南京物联传感技术有限公司的注册商标。本说明 书中提到所有其他产品名称或商标是其各自品牌所有者的商 标或注册商标。 ●使用前请您认真阅读产品使用说明书，确保正确地、安全 地使用。 ●Wulian门窗磁探测器产品（以下简称“本产品”）为南京 物联传感技术有限公司（以下简称“我司”）出品的智能家 居安防类产品。本产品需要与智能家居相应的APP客户端同 步使用，并须使用本产品自带的配件。如您未正确地安装及 使用本产品而造成的损失，我司将不承担任何责任。 ●我司随时可能对本说明书中的产品信息进行更新，恕不另 行通知。请您及时关注我司资讯，下载最新版的APP客户 端。 ●未经我司的明确书面许可，任何个人及企业不得复制本说 明书的全部或部分内容，不得使用我司注册商标。对非法使 用我司商标的行为，我司将依法追究行为人及企业法律责 任。 ●欢迎您登录我司官网www.wulian.cc，了解更多智能家居 产品信息。 Welcome to use Smart Contact Sensor User Manual ● is th e registered trademark of Nanjing IOT Sensor Technology Co., Ltd. All the other trademarks and registered trademarks mentioned in this manual are trademarks or registered trademarks of their respective owners. ●Please read this manual carefully for the proper use of this product. ●Smart Contact Sensor (hereinafter referred to as “this product”) are smart home audio and video products produced by Nanjing IOT Sensor Technolog y Co., Ltd. (hereinafter referred to as “Wulian”). This product sh all be used with smart home APP as well as the supplied accessories. Wulian is not responsible for any loss due to improper installation and usage o f this product. ●Please check the Wulian website periodically for manual and APP update availability and the relevance. ●Without the written permission of Wulian, any individuals and enterprises shall not copy all or part of the contents of this manual, or use our registered trademark. Any illegal use of our trademarks shall be investigated according to law. ●For more information about smart home products, please visit: www.wulian.cc/english. 1 Features ●Support IEEE 802.15.4 ZigBee/SmartRoom protocol. ●Under defense, remotely control door is open or closed, and send real-time monitor status to smart APP. ●Make scene setting by smart APP for linkage with our other devices. ●Alarm with wireless transmission brings about rapid response, high anti-interference, and low rate of false alarm. ●Low consumption, energy saving, and environment friendly for building green human living environment. ●Wireless device with small size is for hiding and merging with home environment perfectly. ●Made of high shock-resistance and temperature-resistance material, shell is sturdy and durable. Product Parameter Antenna Type Power Parameter Battery Type Stand-by Current Warning Distance Installation Method Material &Color Net Weight Flame Retardant Rating Operating Temperature Operating Humidity PCB Antenna DC 3V CR2*1 4uA 20mm Window Mounted PC， White 55 UL94 V-2 -10°C～ +45°C ≤95%RH(Noncondensing) IEEE 802.15.4 （ZigBee/SmartRoom） Communication Protocol Main Body 23×19×60 Magnetic Part 10×19×60 Notes: This product supports gateway with LAN 2 Current For Opening /Closing Door 2uA at opening door 4uA at Closing Door Overall Dimension (L x W x H, mm) Package List Manual *1 Manual Battery *1 Guarantee Card PE Form Tape *2 3 ( Main Body + Base Of Main Body) *1 (Magnetic Part + Base of Magnetic Part)*1 Flat Cross-Recessed Self-Tapping Screw with Pointed Tail (ST3*12)*4 Guarantee Card *1 Function Illustration 4 Main Body Base of Main Body Battery Compartment SET Key System Indicator Main Body Of Magnetic Part Base Of Magnetic Part Installation Steps Step 1: Separate [Base of Main Body] & [Base of Magnetic Part] from their respective main body as per below illustration. 5 Main Body Base of Main Body Main Body of Magnetic Part Base of Magnetic Part Step 2: Option 1: Fix [Base of Main Body] on the door frame or window frame. [Base of Main Body] is fastened to the right position of door frame or window frame via 2 pieces of screw. Similarly, fix [Base of Magnetic Part] on the right position of door or window via 2 pieces of screw. 6 Door Frame Door Base of Main Body Base of Magnetic Part CR2 Option 2: Stick this product on the proper flat surface by the equipped PE form tape.Paste PE form tape on the base of product, and then stick the product in the selected place. Notes: Before installation, please kee…

Text truncated - open the document above for the full version.

Nanjing IOT Sensor Technology Co.,Ltd Statement We hereby state that these models are identical in interior structure, electrical circuits and components, and just product brands, shapes, color and models are different for the marketing requirement. Your assistance on this matter is highly appreciated. FCC ID: 2ADLSWLSP-MT01 Product Name: Smart Contact Sensor Trade Name: Wulian, SmartRoom Model Number: WL-ZSPDBPW-MT-01(Wulian) (White) Multiple Listing Model Number: WL-ZSPDBPW-MT-xx (xx denotes 95~99) (Wulian) (White) WH-ZSPDBPW-MT-01(Wulian, SmartRoom) (White) WG-ZSPDBPB-MT-01(Wulian, SmartRoom) (Black) SH-ZSPDBPW-MT-01(Wulian, SmartRoom) (White) YJ-ZSPDBPW-MT-01(Wulian, SmartRoom) (White) Sincerely, Name: Eaton Wang Title: Product Certification Manager Signature:

Nanjing IOT Sensor Technology Co., Ltd. FCC ID: 2ADLSWLSP-MT01 POWER OF ATTORNEY Date: October 23, 2015 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern: We, the undersigned, hereby authorize Waltek Services (ShenZhen) Co., Ltd. (Philo Zhong) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Services (ShenZhen) Co., Ltd. (Philo Zhong) on our behalf shall have the same effect as acts of our own. This authorization expires on October 24, 2016. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, Nanjing IOT Sensor Technology Co., Ltd. are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Nanjing IOT Sensor Technology Co., Ltd. ................................................................................. Signature Eaton Wang / Product Certification Manager ................................................................................. Typed name and Title

Nanjing IOT Sensor Technology Co., Ltd. Date: Oct. 23, 2015 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2ADLSWLSP-MT01 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Schematics Block Diagram Operational Description SCH.pdf BlockDiagram.pdf CircuitDescription.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Nanjing IOT Sensor Technology Co., Ltd. ................................................ Signature Eaton Wang / Product Certification Manager ................................................ Typed name and Title

Reference No.: WTS15S0832315E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn 14 Photographs - Constructional Details 14.1 External Photos Model WL-ZSPDBPW-MT-01 Reference No.: WTS15S0832315E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn Reference No.: WTS15S0832315E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn Reference No.: WTS15S0832315E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn Model SH-ZSPDBPW-MT-01 Reference No.: WTS15S0832315E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn Reference No.: WTS15S0832315E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn Reference No.: WTS15S0832315E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn Reference No.: WTS15S0832315E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn Reference No.: WTS15S0832315E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn Reference No.: WTS15S0832315E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn Model WG-ZSPDBPB-MT-01 Reference No.: WTS15S0832315E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn Reference No.: WTS15S0832315E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn Reference No.: WTS15S0832315E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn Reference No.: WTS15S0832315E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn Reference No.: WTS15S0832315E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn Reference No.: WTS15S0832315E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn Reference No.: WTS15S0832315E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn Model WH-ZSPDBPW-MT-01 Reference No.: WTS15S0832315E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn Reference No.: WTS15S0832315E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn Reference No.: WTS15S0832315E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn Reference No.: WTS15S0832315E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn Reference No.: WTS15S0832315E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn Reference No.: WTS15S0832315E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn Model YJ-ZSPDBPW-MT-01 Reference No.: WTS15S0832315E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn Reference No.: WTS15S0832315E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn Reference No.: WTS15S0832315E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn Reference No.: WTS15S0832315E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn Reference No.: WTS15S0832315E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn Reference No.: WTS15S0832315E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn

Industrial Design Department 工业设计部 标签说 标签内容 明 南京物联传感技术有限公司 魏晓晖 A1 15951909857物联门窗磁探测器_DBPW_MT 颜色参考：PANTONE CoolGray 6C 材质：合成纸覆膜 整体厚度：0.15mm 0700 Name:Smart Contact SensorModel:WL-ZSPDBPW-MT-01FCC ID :2ADLSWLSP-MT01 0700 Name:Smart Contact SensorModel:WL-ZSPDBPW-MT-01FCC ID :2ADLSWLSP-MT01 24.5mm 13.5mm 4xR1.0mm Industrial Design Department 工业设计部 标签说 标签内容 明 南京物联传感技术有限公司 魏晓晖 A1 15951909857 智慧家居门磁 颜色参考：PANTONE CoolGray 6C 13.5mm 24.5mm 材质：合成纸覆膜 整体厚度：0.15mm 4xR1.0mm Name: Smart Contact Sensor Model:SH-ZSPDBPW-MT-01FCC ID: 2ADLSWLSP-MT01 Name: Smart Contact Sensor Model:SH-ZSPDBPW-MT-01FCC ID: 2ADLSWLSP-MT01 Industrial Design Department 工业设计部 标签说 标签内容 明 南京物联传感技术有限公司 魏晓晖 A1 15951909857 智慧家居门磁 颜色参考：PANTONE CoolGray 6C 13.5mm 24.5mm 材质：合成纸覆膜 整体厚度：0.15mm 4xR1.0mm Name: Smart Contact Sensor Model:SH-ZSPDBPW-MT-01FCC ID: 2ADLSWLSP-MT01 Name: Smart Contact Sensor Model:SH-ZSPDBPW-MT-01FCC ID: 2ADLSWLSP-MT01 Industrial Design Department 工业设计部 标签说 标签内容 明 南京物联传感技术有限公司 魏晓晖 A1 15951909857 云家门磁 颜色参考：PANTONE CoolGray 6C 13.5mm 24.5mm 材质：合成纸覆膜 整体厚度：0.15mm 4xR1.0mm Name: Smart Contact Sensor Model:YJ-ZSPDBPW-MT-01FCC ID: 2ADLSWLSP-MT01 Name: Smart Contact Sensor Model:YJ-ZSPDBPW-MT-01FCC ID: 2ADLSWLSP-MT01 Industrial Design Department 工业设计部 标签说 标签内容 明 南京物联传感技术有限公司 魏晓晖 A1 15951909857 云家门磁 颜色参考：PANTONE CoolGray 6C 13.5mm 24.5mm 材质：合成纸覆膜 整体厚度：0.15mm 4xR1.0mm Name: Smart Contact Sensor Model:YJ-ZSPDBPW-MT-01FCC ID: 2ADLSWLSP-MT01 Name: Smart Contact Sensor Model:YJ-ZSPDBPW-MT-01FCC ID: 2ADLSWLSP-MT01 Industrial Design Department 工业设计部 标签说 标签内容 明 南京物联传感技术有限公司 魏晓晖 A1 15951909857 物联之家门磁 颜色参考：PANTONE CoolGray 6C 13.5mm 24.5mm 材质：合成纸覆膜 整体厚度：0.15mm 4xR1.0mm Name: Smart Contact Sensor Model:WH-ZSPDBPW-MT-01FCC ID: 2ADLSWLSP-MT01 Name: Smart Contact Sensor Model:WH-ZSPDBPW-MT-01FCC ID: 2ADLSWLSP-MT01 Industrial Design Department 工业设计部 标签说 标签内容 明 南京物联传感技术有限公司 魏晓晖 A1 15951909857 物联之家门磁 颜色参考：PANTONE CoolGray 6C 13.5mm 24.5mm 材质：合成纸覆膜 整体厚度：0.15mm 4xR1.0mm Name: Smart Contact Sensor Model:WH-ZSPDBPW-MT-01FCC ID: 2ADLSWLSP-MT01 Name: Smart Contact Sensor Model:WH-ZSPDBPW-MT-01FCC ID: 2ADLSWLSP-MT01 Industrial Design Department 工业设计部 标签说 标签内容 明 南京物联传感技术有限公司 魏晓晖 A1 15951909857 物联传感门磁 颜色参考：PANTONE CoolGray 6C 13.5mm 24.5mm 材质：合成纸覆膜 整体厚度：0.15mm 4xR1.0mm Name: Smart Contact Sensor Model:WG-ZSPDBPB-MT-01FCC ID: 2ADLSWLSP-MT01 Name: Smart Contact Sensor Model:WG-ZSPDBPB-MT-01FCC ID: 2ADLSWLSP-MT01 Industrial Design Department 工业设计部 标签说 标签内容 明 南京物联传感技术有限公司 魏晓晖 A1 15951909857 物联传感门磁 颜色参考：PANTONE CoolGray 6C 13.5mm 24.5mm 材质：合成纸覆膜 整体厚度：0.15mm 4xR1.0mm Name: Smart Contact Sensor Model:WG-ZSPDBPB-MT-01FCC ID: 2ADLSWLSP-MT01 Name: Smart Contact Sensor Model:WG-ZSPDBPB-MT-01FCC ID: 2ADLSWLSP-MT01

Label Location

Reference No.: WTS15S0832315E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn 14.2 Internal Photos Model WL-ZSPDBPW-MT-01 Reference No.: WTS15S0832315E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn ANT. Reference No.: WTS15S0832315E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn ======End of Report======

Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn TEST REPORT Reference No. .................... : WTS15S0832314E FCC ID................................. : 2ADLSWLSP-MT01 Applicant ............................ : Nanjing IOT Sensor Technology Co., Ltd. Address .............................. : No. 12, Mozhou East Road, Nanjing, China Manufacturer ..................... : Nanjing IOT Sensor Technology Co., Ltd Address .............................. : B11 Software Valley, No.15, Fengji Avenue, Yuhuatai District, Nanjing, China Product Name .................... : Smart Contact Sensor Model No. ........................... : WL-ZSPDBPW-MT-01, WL-ZSPDBPW-MT-xx (xx denotes 95~99), WH-ZSPDBPW-MT-01, WG-ZSPDBPB-MT-01, SH-ZSPDBPW-MT- 01, YJ-ZSPDBPW-MT-01 Brand .................................. : Wulian, SmartRoom Standards ........................... : FCC CFR47 Part 15 C Section 15.247:2014 Date of Receipt sample ..... : Aug. 20, 2015 Date of Test ........................ : Aug. 21, 2015 – Aug. 31, 2015 Date of Issue ...................... : Nov. 03, 2015 Test Result ......................... : Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Services (Shenzhen) Co., Ltd. Address: 1/F., Fukangtai Building, West Baima Road, Songgang Street, Baoan District, Shenzhen, Guangdong, China Tel :+86-755-83551033 Fax:+86-755-83552400 Compiled by: Approved by: Zero Zhou / Test Engineer Philo Zhong / Manager Reference No.: WTS15S0832314E Page 2 of 40 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 2 Test Summary Test Items Test Requirement Result Maximum Permissible Exposure (Exposure of Humans to RF Fields) 1.1307(b)(1) PASS Reference No.: WTS15S0832314E Page 3 of 40 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 3 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 TEST SUMMARY .................................................................................................................................................. 2 3 CONTENTS ............................................................................................................................................................ 3 4 GENERAL INFORMATION .................................................................................................................................. 4 4.1 GENERAL DESCRIPTION OF E.U.T. ................................................................................................................ 4 4.2 DETAILS OF E.U.T. ......................................................................................................................................... 4 4.3 CHANNEL LIST ................................................................................................................................................. 4 4.4 TEST FACILITY ................................................................................................................................................. 4 5 EQUIPMENT USED DURING TEST .................................................................................................................. 5 5.1 EQUIPMENTS LIST ........................................................................................................................................... 5 5.2 DESCRIPTION OF SUPPORT UNITS ................................................................................................................. 5 5.3 MEASUREMENT UNCERTAINTY ....................................................................................................................... 6 5.4 TEST EQUIPMENT CALIBRATION ..................................................................................................................... 6 6 RF EXPOSURE ...................................................................................................................................................... 7 6.1 REQUIREMENTS ............................................................................................................................................... 7 6.2 THE PROCEDURES / LIMIT ................................................................................................................................ 7 6.3 MPE CALCULATION METHOD ......................................................................................................................... 8 7 PHOTOGRAPHS - CONSTRUCTIONAL DETAILS ........................................................................................ 9 7.1 EXTERNAL PHOTOS ......................................................................................................................................... 9 7.2 INTERNAL PHOTOS ........................................................................................................................................ 38 Reference No.: WTS15S0832314E Page 4 of 40 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 4 General Information 4.1 General Description of E.U.T. Product Name: : Smart Contact Sensor Model No.: : WL-ZSPDBPW-MT-01, WL-ZSPDBPW-MT-xx (xx denotes 95~99), WH-ZSPDBPW-MT-01, WG-ZSPDBPB-MT-01, SH-ZSPDBPW-MT-01, YJ-ZSPDBPW-MT-01 Model Difference: : These models are identical in interior structure, electrical circuits and components, and just product brands, shapes, color and models are different for the marketing requirement. Operation Frequency: 2405MHz ~ 2480MHz The Lowest Oscillator: 32.768KHz Antenna Gain: 1.0 dBi 4.2 Details of E.U.T. Technical Data: DC 3V powered by CR2 Lithium Battery 4.3 Channel List Channel No. Frequency (MHz) Channel No. Frequency (MHz) Channel No. Frequency (MHz) Channel …

Text truncated - open the document above for the full version.

Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Page 1 of 58 TEST REPORT Reference No. .................... : WTS15S0832315E FCC ID................................. : 2ADLSWLSP-MT01 Applicant ............................ : Nanjing IOT Sensor Technology Co., Ltd. Address .............................. : No. 12, Mozhou East Road, Nanjing, China Manufacturer ..................... : Nanjing IOT Sensor Technology Co., Ltd Address .............................. : B11 Software Valley, No.15, Fengji Avenue, Yuhuatai District, Nanjing, China Product Name .................... : Smart Contact Sensor Model No. ........................... : WL-ZSPDBPW-MT-01, WL-ZSPDBPW-MT-xx (xx denotes 95~99), WH-ZSPDBPW-MT-01, WG-ZSPDBPB-MT-01, SH-ZSPDBPW-MT- 01, YJ-ZSPDBPW-MT-01 Brand .................................. : Wulian, SmartRoom Standards ........................... : FCC CFR47 Part 15 C Section 15.247:2014 Date of Receipt sample ..... : Aug. 20, 2015 Date of Test ........................ : Aug. 21, 2015 – Aug. 31, 2015 Date of Issue ...................... : Nov. 03, 2015 Test Result ......................... : Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Services (Shenzhen) Co., Ltd. Address: 1/F., Fukangtai Building, West Baima Road, Songgang Street, Baoan District, Shenzhen, Guangdong, China Tel :+86-755-83551033 Fax:+86-755-83552400 Compiled by: Approved by: Zero Zhou / Test Engineer Philo Zhong / Manager Reference No.: WTS15S0832315E Page 2 of 58 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 2 Test Summary Test Items Test Requirement Result Radiated Emissions 15.247 15.205(a) 15.209(a) PASS Conducted Emissions 15.207(a) N/A 6dB Bandwidth 15.247(a)(2) PASS Maximum Peak Output Power 15.247(b)(3),(4) PASS Power Spectral Density 15.247(e) PASS Band Edge 15.247(d) PASS Antenna Requirement 15.203 PASS Maximum Permissible Exposure (Exposure of Humans to RF Fields) 1.1307(b)(1) PASS Reference No.: WTS15S0832315E Page 3 of 58 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 3 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 TEST SUMMARY ................................................................................................................................................ 2 3 CONTENTS .......................................................................................................................................................... 3 4 GENERAL INFORMATION ................................................................................................................................ 4 4.1 GENERAL DESCRIPTION OF E.U.T. .............................................................................................................. 4 4.2 DETAILS OF E.U.T. ....................................................................................................................................... 4 4.3 CHANNEL LIST ............................................................................................................................................... 4 4.4 TEST MODE ................................................................................................................................................... 5 4.5 TEST FACILITY ............................................................................................................................................... 5 5 EQUIPMENT USED DURING TEST ................................................................................................................ 6 5.1 EQUIPMENTS LIST ......................................................................................................................................... 6 5.2 DESCRIPTION OF SUPPORT UNITS ............................................................................................................... 7 5.3 MEASUREMENT UNCERTAINTY ..................................................................................................................... 7 5.4 TEST EQUIPMENT CALIBRATION ................................................................................................................... 7 6 RADIATED EMISSIONS..................................................................................................................................... 8 6.1 EUT OPERATION ........................................................................................................................................... 8 6.2 TEST SETUP .................................................................................................................................................. 9 6.3 SPECTRUM ANALYZER SETUP .................................................................................................................... 10 6.4 TEST PROCEDURE ...................................................................................................................................... 11 6.5 CORRECTED AMPLITUDE & MARGIN CALCULATION ................................................................................... 11 6.6 SUMMARY OF TEST RESULTS ..................................................................................................................... 12 7 BAND EDGE MEASUREMENT ...................................................................................................................... 15 7.1 TEST PRODUCE ........................................................................................................................................... 15 7.2 TEST RESULT .......................................................................................................…

Text truncated - open the document above for the full version.

Reference No.: WTS15S0832315E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn 13 Photographs – Model WL-ZSPDBPW-MT-01 Test Setup 13.1 Radiated Emission Test frequency below 30MHz at Test Site 2# Tes t frequency from 30MHz to 1GHz at Test Site 2# Reference No.: WTS15S0832315E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn Test frequency above 1GHz at Test Site 1#