2ADNG-YND-GWWireless Charger

ENERGOUS POWERBRIDGE PRO+ (FCC ID: 2ADNG-YND-GW) INSTALLATION DOCUMENT Document Version: V1.0 Date: 06/29/2026 Prepared By: Ryan Fanciullo, Energous Director of Operations Purpose This document provides installation guidelines and best practices for the Energous PowerBridge PRO+ transmitter, which operates in the 900 MHz band and 2.4 GHz for BLE and Wi-Fi communication protocols. The PowerBridge PRO+ has an output power of 8 W EIRP (2 W conducted). The intent is to ensure safe, compliant, and optimal system performance in commercial and industrial environments. 2. System Overview • Frequency Band: 900 MHz & 2.4Ghz • Maximum EIRP: 8 Watts • Conducted Power: 2 Watts • Mounting Pattern: 100 × 100 Vesa Mount • Typical Applications: Commercial and industrial Wireless Power Networks for IOT tags 3. Safety and Compliance Considerations • Installation must comply with all applicable local, national, and regulatory requirements. This document addresses general best practices but does not take precedence of local laws and regulations. • Equipment should be mounted to prevent accidental contact by personnel. • Install PowerBridge PRO+ accordingly to ensure a minimum 35cm separation distance from persons. • Ensure mounting hardware is rated for the environment and load. 4. Approved Mounting Methods The transmitter supports both wall-mounted and ceiling-mounted installations using approved mounting hardware. 4.1 Wall Mount Installation • Utilize an approved wall-mount bracket compatible with the 100 × 100 Vesa Mount pattern. • Minimum mounting height should take into consideration the required 35cm separation distance from all persons. • Wall mounting closer than this required separation distance, 35cm, from all persons does not comply with FCC RF radiation exposure limits as per FCC Rule Part 2.1093. 4.2 Ceiling Mount Installation The transmitter may be mounted from the ceiling using the following configurations: • Single Mount • Double Mount • Quad Mount Standard Ceiling Height (8-Foot Work Areas) • Units may be mounted directly to the ceiling. • Mounting below an 8-foot ceiling height is not recommended as it reduces the WPN operation. Commercial / High-Ceiling Environments • Recommended mounting height range: o 10 to 16 feet above the finished floor. • This height range provides: o Optimal RF propagation o Reduced obstructions o Improved safety and compliance 5. Installation Best Practices • Verify mounting surface integrity before installation. • Confirm antenna orientation and clearance from large metal objects. • Maintain consistent mounting height across multiple units for uniform RF coverage. • Avoid installing near sources of electrical interference. • Ensure installation meets the required minimum 35cm separation distance from all persons. 6. Final Inspection and Verification After installation: • Verify mechanical security of all mounts. • Confirm unit orientation and minimum separation distance. • Power on the unit and confirm normal operation. • Document installation location, height, and mounting type. 8. Revision History Version Description Date V1.0 None 6/29/2026

Page 1 NONDISCLOSURE AND CONFIDENTIALITY AGREEMENT This Nondisclosure and Confidentiality Agreement (this “Agreement”) is made this ___ day of _________________, 2026 (the “Effective Date”) by and between Energous Corporation, a Delaware corporation (“Energous”) and _______________, a ______________corporation (“Company”). Energous and Company are hereinafter referred to individually as a “Party” and collectively as the “Parties”. The Parties may desire to disclose to each other and discuss certain confidential information for the purpose of discussing a potential business relationship (the “Purpose”). This Agreement shall govern the terms and conditions of use and disclosure of Confidential Information (as hereinafter defined) by the Parties. Accordingly, in consideration of the foregoing premises and mutual covenants contained herein, the Parties, intending to be legally bound, agree as follows: 1. “Confidential Information” of a Party means any and all trade secrets, confidential, proprietary or other information disclosed by or on behalf of a Party (“Disclosing Party”) to the other Party (“Recipient”), either directly or indirectly, in writing, orally or by inspection of tangible and intangible objects that is either: (i) conspicuously marked or otherwise identified, in writing or orally, as confidential or proprietary at the time of disclosure or within a reasonable time thereafter; or (ii) should reasonably be understood by Recipient to be confidential based upon the nature of the information disclosed or the circumstances of the disclosure. Confidential Information includes but is not limited to technical data, know-how, research, markets, works of original authorship, photographs, negatives, digital images, ideas, inventions (whether or not patentable), processes, formulas, technology, designs, drawings and engineering, hardware configuration information, business plans, specifications, forecasts, projections, analyses, employee, client, customer and vendor information, software (including but not limited to documentation, code, including source and object code, firmware and computer programs), services, product and system designs, manufacturing, logistics and sales processes, business opportunities and strategic partnerships and alliances and other information relating to the business or matters of Disclosing Party or its affiliates, suppliers, customers or other business partners. Confidential Information also includes the Purpose and the existence of this Agreement and the fact that the Parties may be or are involved in negotiations with respect to a possible business relationship or other transactions. The Parties also acknowledge and agree that any analyses, compilations, studies or other embodiments or derivatives of Confidential Information of the Disclosing Party prepared by the Recipient (or anyone to whom it discloses such Confidential Information) shall be owned solely by the Disclosing Party and treated as Confidential Information of the Disclosing Party hereunder. 2. Exceptions. “Confidential Information” shall not include any information that: (i) the Recipient can demonstrate, through its files and written records, was previously known to Recipient without an obligation not to disclose such information at the time of disclosure; (ii) the Recipient can demonstrate, through documents and other competent evidence in its possession, was independently developed by or for Recipient without use of the Disclosing Party’s Confidential Information; (iii) is acquired by Recipient from a third party which was not under an obligation not to disclose such information; or (iv) becomes publicly available through no breach of this Agreement, after the Disclosing Party’s disclosure of the information. In the event of any dispute between the Parties as to whether specific information is within one or more of the exceptions set forth in this Section 2, Page 2 the Recipient will bear the burden of proof, by clear and convincing evidence, that such information is within the claimed exception(s). 3. Protection. Recipient shall maintain the confidentiality of the Confidential Information of Disclosing Party, including but not limited to exercising the same degree of care as Recipient exercises with its own most highly confidential or proprietary information, but in no event less than a reasonable degree of care, to prevent its unauthorized disclosure or use. Recipient shall not, without the prior written consent of Disclosing Party, disclose any portion of Disclosing Party’s Confidential Information to any person other than its officers, employees, affiliates, partners or advisors (“Representatives”) who are bound by obligations of confidentiality no less protective than the terms of this Agreement and who “need to know” such Confidential Information in order to accomplish the Purpose, and then only to the extent they need to know. The Recipient will also: (i) inform each Representative of the requirements of this Agreement, and (ii) ensure that each Representative complies with each of the Recipient’s obligations, as set forth in this Agreement. The Recipient will immediately notify the Disclosing Party in the event of any unauthorized use or disclosure of the Disclosing Party’s Confidential Information. In any event, the Recipient will be responsible for any breach of this Agreement by such employees or Representatives, and Recipient will take all reasonable measures (including but not limited to initiating court proceedings) to enforce the terms of this Agreement with respect to such employees or Representatives. 4. Use. Recipient may not directly or indirectly: (i) use or make copies of Disclosing Party’s Confidential Information other than to the extent necessary for the Purpose; or (ii) divulge or disclose any of the Disclosing Party’s Confidential Information to third parties. Recipient shall be responsible and liable for any breach of this Agreement or unauthorized disclosure, use…

Text truncated - open the document above for the full version.

Date: 7/21/2026 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) Agent Designation Attestation FCC ID: 2ADNG-YND-GW FRN: 0023794118 Energous Corporation (“the applicant”) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicant’s agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility under CFR 47 §2.929(c) to inform the FCC whenever the agent information changes. U.S. Agent Information: Jose Martinez Energous Corporation 3590 North First Street Suite 330 San Jose, CA 95134 [email protected] Sincerely yours, Jose Martinez Sr. Regulatory Compliance Engineer Energous Corporation

Date: 7/1/2026 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(5) Attestation FCC ID: 2ADNG-YND-GW 1. Energous (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2. Energous (“the applicant”) certifies that the device does not have cybersecurity and / or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, identified on the Covered List installed on the device, nor will it be installed by the applicant any time after certification. 3. Energous (“the applicant”) certifies that the RF device is not a router “produced in a foreign country”. 4. Energous (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Name: Jose Martinez Job Title: Sr. Regulatory Compliance Engineer Company Name: Energous Corporation

Date: 6/15/2026 UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to: a) fulfill the requirements for the scope of certification requested, including implementing any appropriate changes requested by UL Verification Services Telecommunications Certification Body (TCB) and / or the FCC; b) supply any and all information needed for the evaluation of the products for which certification is sought; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) not use our product certification in such a manner as to bring the TCB or FCC into disrepute and to not make any statement regarding product certification which the TCB or FCC may consider misleading or unauthorized; e) discontinue use of all advertising matter that contains any reference thereto and complies with any and all actions required by the FCC upon suspension or cancellation of certification; f) use certification only to indicate that products are certified in conformity with specified standards; g) endeavor to ensure that no certificate or report or any part thereof is used in a misleading manner, and any copies of the grants/certificates shall be reproduced in their entirety; h) comply with the requirements of the TCB and FCC, including the use of marks and label information prescribed for the scope of certification, when making reference to product certification in communication media such as documents, brochure or advertisements; i) comply with the requirements for certification, supply any information needed for evaluation of products to be certified and, where applicable, make provision for the participation of observers; j) ensure that products marketed under the scope of the requested certification continue to comply with the certification requirements; k) provide a sample of a production unit for testing within 30 days of the request should this product be selected as part of either the TCB’s or the FCC’s market surveillance requirements; l) keep a record of all complaints relating to product’s compliance with requirements of relevant standard; make records available to UL or FCC when requested; take appropriate action with respect to such complaints and any deficiencies found in the product that affect compliance with requirements for certification; document the actions taken with respect to complaints and/or deficiencies; m) inform the TCB immediately of any changes that may affect its ability to comply with the certification requirements. This authorization is valid until further written notice from the applicant. Sincerely Yours, Jose Martinez Sr. Regulatory Compliance Engineer Energous Corporation

Date: 7/1/2026 Attn: FCC Office of Engineering and Technology / UL Verification Services TCB Subject: Request for Confidentiality FCC ID: 2ADNG-YND-GW To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. • Schematic Diagram • Block Diagram • Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Jose Martinez Sr. Regulatory Compliance Engineer Energous Corporation

Product Label The regulatory label consists of a durable polyester label with permanent pressure-sensitive adhesive. The label is permanently affixed to the rear of the product within a recessed area of the enclosure. The permanent adhesive and recessed mounting location help ensure the label remains securely attached during normal use. Label Location: Bottom of the device

RF EXPOSURE TEST REPORT Report Number: 16148856-E5V1 Applicant : ENERGOUS CORPORATION 3590 NORTH FIRST STREET, SUITE 330, SAN JOSE, CA 95134, U.S.A. Model : YND-PBP+ Brand : ENERGOUS FCC ID : 2ADNG-YND-GW EUT Description : WIRELESS CHARGER Test Standard(s) : FCC 47 CFR PART 1 SUBPART I FCC 47 CFR PART 2 SUBPART J Date Of Issue: 2026-01-28 Prepared by: UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538, U.S.A. TEL: (510) 319-4000 FAX: (510) 661-0888 REPORT NO: 16148856-E5V1 DATE: 2026-01-28 FCC ID: 2ADNG-YND-GW Page 2 of 10 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 319-4000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. Revision History Rev. Issue Date Revisions Revised By V1 2026-01-28 Initial Issue --- REPORT NO: 16148856-E5V1 DATE: 2026-01-28 FCC ID: 2ADNG-YND-GW Page 3 of 10 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 319-4000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ..................................................................................4 2. TEST METHODOLOGY ......................................................................................................5 3. REFERENCES ....................................................................................................................5 4. FACILITIES AND ACCREDITATION ..................................................................................5 5. DECISION RULES AND MEASUREMENT UNCERTAINTY ...............................................6 5.1. METROLOGICAL TRACEABILITY ..............................................................................6 5.2. DECISION RULES ......................................................................................................6 5.3. MEASUREMENT UNCERTAINTY ...............................................................................6 6. MAXIMUM PERMISSIBLE EXPOSURE (LIMITS AND EQUATIONS) ................................7 6.1. FCC RULES ................................................................................................................7 6.2. EQUATIONS ...............................................................................................................8 7. RF EXPOSURE RESULTS ................................................................................................10 REPORT NO: 16148856-E5V1 DATE: 2026-01-28 FCC ID: 2ADNG-YND-GW Page 4 of 10 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 319-4000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. 1. ATTESTATION OF TEST RESULTS Applicant Name and Address Energous Corporation 3590 North First Street, Suite 330, San Jose, CA 95134, U.S.A. Model YND-PBP+ Brand Energous FCC ID 2ADNG-YND-GW EUT Description Wireless Charger Applicable Standards FCC 47 CFR PART 1 SUBPART I FCC 47 CFR PART 2 SUBPART J Test Results COMPLIES UL Verification Services Inc. tested the above equipment in accordance with the requirements set forth in the above standards. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. The results documented in this report apply only to the sample tested, under the conditions and modes of operation as described herein. It is the manufacturer's responsibility to ensure that additional production units of this model are manufactured with identical electrical and mechanical components. All samples tested were in good operating condition throughout the entire test program. Measurement Uncertainties are published for informational purposes only and were not taken into account unless noted otherwise. This document may not be altered or revised in any way unless done so by UL Verification Services Inc., and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by UL Verification Services Inc. will constitute fraud and shall nullify the document. Approved & Released By: Prepared By: Francisco de Anda Staff Engineer UL Verification Services Inc. Tina Chu Senior Project Engineer UL Verification Services Inc. REPORT NO: 16148856-E5V1 DATE: 2026-01-28 FCC ID: 2ADNG-YND-GW Page 5 of 10 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 319-4000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. 2. TEST METHODOLOGY All calculations were made in accordance with FCC Parts 1.1310, 2.1091, 2.1093, KDB 447498 D01, KDB 447498 D03, IEEE Std C95.1-2019, IEEE Std C95.3-2021. 3. REFERENCES This report contains data provided by the customer which can impact the validity of results. UL Verification Services Inc. is only responsible for the validity of results after the integration of the data provided by the customer. WPT/BLE/Zigbee output power data are excerpted from the applicable original test reports: UL Verification Services Inc. Document 16148856-E1 for WPT operation in the 900 MHz band, UL Verification Services Inc. Document 16148856-E2 for BLE operation in the 2.4 GHz band, UL Verification Services Inc. Document 16148856-E3 for DTS operation in the 2.4 GHz band. BLE/DTS duty cycle and output power are taken from each test report listed above. WPT duty cycle and output power are provided by the customer. All radios antenna peak gain information is provided by customer. 4. FACILITIES AND ACCREDITATION UL Verification Services Inc. is accredited by A2LA, certification #0751.05. REPORT NO: 16148856-E5V1 DATE: 2026-01-28 FCC ID: 2ADNG-YND-GW…

Text truncated - open the document above for the full version.

TEST REPORT Report Number: 16148856-E2V2 Applicant : ENERGOUS CORPORATION 3590 NORTH FIRST STREET, SUITE 330, SAN JOSE, CA 95134, U.S.A. Model : YND-PBP+ Brand : Energous FCC ID : 2ADNG-YND-GW EUT Description : WIRELESS CHARGER Test Standard(s) : FCC 47 CFR PART 15 SUBPART C Date Of Issue: 2026-07-02 Prepared by: UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538, U.S.A. TEL: (510) 319-4000 REPORT NO: 16148856-E2V2 DATE: 2026-07-02 FCC ID: 2ADNG-YND-GW Page 2 of 45 UL VERIFICATION SERVICES INC. 47173 Benicia Street, Fremont, CA 94538, USA TEL:(510) 319-4000 FAX:(510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT REVISION HISTORY Rev. Issue Date Revisions Revised By V1 2026-01-28 Initial Issue --- V2 2026-07-02 Revised Section 3 Tina Chu REPORT NO: 16148856-E2V2 DATE: 2026-07-02 FCC ID: 2ADNG-YND-GW Page 3 of 45 UL VERIFICATION SERVICES INC. 47173 Benicia Street, Fremont, CA 94538, USA TEL:(510) 319-4000 FAX:(510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ----------------------------------------------------------------------- 5 2. TEST RESULTS SUMMARY ---------------------------------------------------------------------------------- 6 3. TEST METHODOLOGY ---------------------------------------------------------------------------------------- 6 4. FACILITIES AND ACCREDITATION ----------------------------------------------------------------------- 6 5. DECISION RULES AND MEASUREMENT UNCERTAINTY ---------------------------------------- 7 5.1. METROLOGICAL TRACEABILITY -------------------------------------------------------------------- 7 5.2. DECISION RULES------------------------------------------------------------------------------------------ 7 5.3. MEASUREMENT UNCERTAINTY --------------------------------------------------------------------- 7 5.4. SAMPLE CALCULATION --------------------------------------------------------------------------------- 7 6. EQUIPMENT UNDER TEST ----------------------------------------------------------------------------------- 8 6.1. EUT DESCRIPTION --------------------------------------------------------------------------------------- 8 6.2. MAXIMUM OUTPUT POWER --------------------------------------------------------------------------- 8 6.3. DESCRIPTION OF AVAILABLE ANTENNAS AND CABLE LOSS --------------------------- 8 6.4. SOFTWARE AND FIRMWARE ------------------------------------------------------------------------- 8 6.5. WORST-CASE CONFIGURATION AND MODE --------------------------------------------------- 9 6.6. DESCRIPTION OF TEST SETUP -------------------------------------------------------------------- 10 7. TEST AND MEASUREMENT EQUIPMENT ------------------------------------------------------------ 13 8. ANTENNA PORT TEST RESULTS ----------------------------------------------------------------------- 14 8.1. ON TIME AND DUTY CYCLE ------------------------------------------------------------------------- 14 8.2. 99% BANDWIDTH ---------------------------------------------------------------------------------------- 15 8.3. 6 dB BANDWIDTH ---------------------------------------------------------------------------------------- 16 8.4. OUTPUT POWER AND POWER SPECTRAL DENSITY -------------------------------------- 17 8.5. AVERAGE POWER -------------------------------------------------------------------------------------- 19 8.6. CONDUCTED SPURIOUS EMISSIONS ----------------------------------------------------------- 20 9. RADIATED TEST RESULTS -------------------------------------------------------------------------------- 23 9.1. LIMITS AND PROCEDURE ---------------------------------------------------------------------------- 23 9.2. TRANSMITTER ABOVE 1 GHz ----------------------------------------------------------------------- 25 9.3. TRANSMITTER WORST CASE BELOW 30MHz ------------------------------------------------ 35 9.4. TRANSMITTER WORST CASE 18-26.5GHz ----------------------------------------------------- 38 10. AC POWER LINE CONDUCTED EMISSIONS------------------------------------------------------ 40 10.1. AC/DC Adapter via USB Cable -------------------------------------------------------------------- 41 REPORT NO: 16148856-E2V2 DATE: 2026-07-02 FCC ID: 2ADNG-YND-GW Page 4 of 45 UL VERIFICATION SERVICES INC. 47173 Benicia Street, Fremont, CA 94538, USA TEL:(510) 319-4000 FAX:(510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. 10.2. POE -------------------------------------------------------------------------------------------------------- 43 11. SETUP PHOTOS -------------------------------------------------------------------------------------------- 45 REPORT NO: 16148856-E2V2 DATE: 2026-07-02 FCC ID: 2ADNG-YND-GW Page 5 of 45 UL VERIFICATION SERVICES INC. 47173 Benicia Street, Fremont, CA 94538, USA TEL:(510) 319-4000 FAX:(510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. 1. ATTESTATION OF TEST RESULTS Applicant Name and Address Energous Corporation 3590 North First Street, Suite 330, San Jose, CA 95134, U.S.A. Model YND-PBP+ Brand Energous FCC ID 2ADNG-YND-GW EUT Description Wireless Charger Serial Number Conducted: 4F4FE2DC042B Radiated: 4F4FE2DC042B Sample Receipt Date 2025-12-23 Date Tested 2025-12-23 to 2026-01-12 Applicable Standards FCC 47 CFR Part 15 Subpart C Test Results COMPLIES UL Verification Services Inc. tested the above equipment in accordance with the requirements set forth in the above standards. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. The results documented in this report apply only to the sample tested, under the conditions and modes of operation as d…

Text truncated - open the document above for the full version.

TEST REPORT Report Number: 16148856-E3V2 Applicant : ENERGOUS CORPORATION 3590 NORTH FIRST STREET, SUITE 330, SAN JOSE, CA 95134, U.S.A. Model : YND-PBP+ Brand : Energous FCC ID : 2ADNG-YND-GW EUT Description : WIRELESS CHARGER Test Standard(s) : FCC 47 CFR PART 15 SUBPART C Date Of Issue: 2026-07-02 Prepared by: UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538, U.S.A. TEL: (510) 319-4000 REPORT NO: 16148856-E3V2 DATE: 2026-07-02 FCC ID: 2ADNG-YND-GW Page 2 of 57 UL VERIFICATION SERVICES INC. 47173 Benicia Street, Fremont, CA 94538, USA TEL:(510) 319-4000 FAX:(510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT REVISION HISTORY Rev. Issue Date Revisions Revised By V1 2026-01-28 Initial Issue --- V2 2026-07-02 Revised Section 3 Tina Chu REPORT NO: 16148856-E3V2 DATE: 2026-07-02 FCC ID: 2ADNG-YND-GW Page 3 of 57 UL VERIFICATION SERVICES INC. 47173 Benicia Street, Fremont, CA 94538, USA TEL:(510) 319-4000 FAX:(510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ..................................................................................5 2. TEST RESULTS SUMMARY ...............................................................................................6 3. TEST METHODOLOGY ......................................................................................................6 4. FACILITIES AND ACCREDITATION ..................................................................................6 5. DECISION RULES AND MEASUREME…

Text truncated - open the document above for the full version.