2AEAN-0614RWIRELESS MICROPHONE CAMERA KIT

2.911 (d)(7)USA Agent v1.2 Section 2.911(d)(7) USA Agent for Service of Process Company name: Rode Microphones Address: 107 Carnarvon Street, Silverwater 2128, Australia FCC ID: 2AEAN-0614R 2.911(d)(7) USA Designated Agent for Service of Process We, [Rode Microphones] (“the applicant”) designate [RODE LLC] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: RODE LLC Address: 2745 Raymond Ave, Signal Hill CA 90755, USA FRN: 0033461500 Contact Name: Doug Marhoffer Telephone No: +1 562 364 7400 Email: [email protected] Applicant Company name: Rode Microphones Address: 107 Carnarvon Street, Silverwater 2128, Australia FRN: 0033490038 Contact Name: Pieter Schillbeeckx Telephone No: 61296485855 Email: [email protected] Signature: Signature: Date: Oct. 14, 2025 Date: Oct. 14, 2025 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-communications-supply- chain-through-the

Rode Microphones 107 Carnarvon Street, Silverwater 2128, Australia Attestation Statements Not Covered Entity Applicant & Not Covered Equipment To: Federal Communications Commission Date: October 15, 2025 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) & (ii) FCC ID: 2AEAN-0614R Rode Microphones (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Pieter Schillbeeckx Title: Head of New Product Development Address: 107 Carnarvon Street, Silverwater 2128, Australia Tel.: 61296485855 Email: [email protected]

Rode Microphones 107 Carnarvon Street, Silverwater 2128, Australia Device WIRELESS MICROPHONE CAMERA KIT Company name Rode Microphones Grantee code 2AEAN FCC ID 2AEAN-0614R FRN 0033490038 Contact name Pieter Schillbeeckx Address 107 Carnarvon Street, Silverwater 2128, Australia Telephone number 61296485855 E‐mail [email protected] Chipset/module information ATS3031L Operating System (if applicable) N/A Storage Capacity (hard drive or other permanent memory storage, if applicable) N/A Item 1. The device is able to install software/program installation? ☐ Yes, go to Item 2. ☑No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky cybersecurity or anti-virus software. Item 2. Technical Requirements for Kaspersky Cybersecurity Software: # General Requirements (For all Devices) Yes / No or N/A Comments 1 Internet connection for activation and updates (For all Operating Systems) N/A Code 00018768 Ed. 1 2 # General Requirements (For Windows Devices) Yes / No or N/A Comments 1 Storage: 1500 MB free space on the hard drive N/A 2 Operating System: Microsoft Windows 8, 8.1, 10 & 11 Home / Pro / Enterprise Microsoft Windows 7 Starter / Home Basic & Premium / Professional / Ultimate SP1 or higher N/A 3 Processor: 1 GHz or higher (x86 or x64) N/A 4 Memory (RAM)1 GB (32-bit) or 2 GB (64-bit) N/A 5 Screen Resolution: Minimum resolution of 1024 x 768 N/A # General Requirements (For macOS devices) Yes / No or N/A Comments 1 Operating System macOS® 13 – 14 N/A 2 Memory (RAM)4 GB N/A 3 Storage: 3455 MB free space on the hard drive N/A # General Requirements (For Android Devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: Android™ 10 – 14 N/A 3 Screen Resolution: Minimum resolution of 320 x 480 N/A # General Requirements (for iOS devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: iOS® 17 N/A # General Requirements (For Linux system) Yes / No or N/A Comments 3 1 Hard drive: 1 GB of free space N/A 2 CPU: Intel Pentium 1 GHz or higher 3 RAM: 1 GB 4 Minimum software requirements: AlmaLinux OS 8 or later; AlterOS 7.5 or later; Astra Linux Common Edition 2.12 or later; CentOS 6.7 or later; Debian GNU/Linux 10.0 or later; EulerOS 2.0 or later; Oracle Linux 7.3 or later ; Red Hat Enterprise Linux 6.7 or later ; Rocky Linux 8.5 or later ; SUSE Linux Enterprise Server 12.5 or later; Ubuntu 12.04 or later ; Uncom OS Home / Business / Education / Enterprise 2.2 or later; ALT Linux Workstaton / Workstation K / Server / Education 8 or later; ROSA Linux Workstation / Server 12 or later ; RED OS 7.3 and later ; After reviewed the technical requirements, is the device capable of supporting the installation of Kaspersky software? ☐ Yes, go to Item 3. ☑No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky software Item 3.Connectivity Capabilities: 4 # Physical Interface Purpose Justification 1 1 # Wireless Interface Purpose Justification 1 1 After the review of this items, the device: ☑Cannot support installation of any cybersecurity or anti-virus software on the covered list. ☐ Potentially can operate with any cybersecurity or anti-virus software on the covered list – additional third- party proof is provided to demonstrate compliance with requirements as of 2.911(d)5(i),(ii) – “Proof of Compliance with Covered List Software Requirements” of this document applies Signature: Name: Pieter Schillbeeckx Date: Oct. 15, 2025 1 The justification field is used to justify why the software cannot be received through that interface. Check the annex for more indications.

TCB CALL página 1 File FCC ID: 2AEAN-0614R Please upload an exhibit that explains how does the TCB verify the new agent information: 1- Is the address of the agent a valid physical US mailing address (not a US post office box, not a virtual mailbox, not P.O. Boxes, not a vacant lot, not a public building, etc.) ○ We have checked if the address exists in a real and potential building (Google maps) + official US register, after this verification and the evidence below we can guarantee the following: not a US post office box not a virtual mailbox not P.O. Boxes not a vacant lot not a public building(note) ► We checked the FCC FRN Search based on the information provided by the grantee. On the official register from : https://bizfileonline.sos.ca.gov/search/business TCB CALL página 2 In google: TCB CALL página 3 ► CONCLUSION by TCB: The ASOP defined and provided by grantee is VALID and confirmed. Therefore the exhibit "C5266091_X23_Ed1_US_Agent_Letter" included in the file is ok. 2- Is the agent physically located at that valid US address such that the agent can be legally served at that address? Yes , check above 3- Has the listed agent clearly agreed in writing to serve as the agent for the grantee at that address? Yes, it is included in the exhibit "C5266091_X23_Ed1_US_Agent_Letter" >

Rode Microphones 107 Carnarvon Street, Silverwater 2128, Australia Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Oct. 14, 2025 Subject; Request for Confidentiality FCC ID: 2AEAN-0614R To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Pieter Schillbeeckx Title: Head of New Product Development

C5266091_X8_Ed.1 1/1 Letter of Authorization < Rode Microphones > Company: Rode Microphones Address: 107 Carnarvon Street, Silverwater 2128, Australia Product Name: WIRELESS MICROPHONE CAMERA KIT Model Number: WIRELESS MICRO CAMERA KIT RECEIVER FCC Identifier: 2AEAN-0614R We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Pieter Schillebeeckx Date: Oct. 14, 2025 Title: Head of New Product Development Signature of applicant:

Page 1 of 11 RF Exposure Report Report No.: AGC10232250904FH01 FCC ID : 2AEAN-0614R APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : WIRELESS MICROPHONE CAMERA KIT BRAND NAME : RØDE MODEL NAME : WIRELESS MICRO CAMERA KIT RECEIVER APPLICANT : Rode Microphones DATE OF ISSUE : Oct. 14, 2025 STANDARD(S) : FCC KDB 447498 D01 V06 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC10232250904FH01 Page 2 of 11 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Oct. 14, 2025 Valid Initial Release Report No.: AGC10232250904FH01 Page 3 of 11 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 3. Test Environment ............................................................................................................................................ 6 3.1 Address Of The Test Laboratory ............................................................................................................... 6 3.2 Test Facility ................................................................................................................................................ 6 3.3 Environmental Conditions ......................................................................................................................... 7 4. Portable Device Evaluation Method and Limit ............................................................................................. 8 5. Mobile Device Evaluation Method and Limit ................................................................................................ 9 6. Measurement Results ................................................................................................................................... 10 7. Measurement Evaluation .............................................................................................................................. 10 Report No.: AGC10232250904FH01 Page 4 of 11 1. General Information Applicant Rode Microphones Address 107 Carnarvon Street, Silverwater 2128, Australia Manufacturer Rode Microphones Address 107 Carnarvon Street, Silverwater 2128, Australia Product Designation WIRELESS MICROPHONE CAMERA KIT Brand Name RØDE Test Model WIRELESS MICRO CAMERA KIT RECEIVER Series Model(s) N/A Difference Description N/A Date of receipt of test item Sep. 15, 2025 Date of Test Sep. 15, 2025 to Oct. 14, 2025 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure-V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Jack Gui (Project Engineer) Oct. 14, 2025 Reviewed By Bibo Zhang (Reviewer) Oct. 14, 2025 Approved By Angela Li (Authorized Officer) Oct. 14, 2025 Report No.: AGC10232250904FH01 Page 5 of 11 2. Product Information 2.1 Product Technical Description Frequency Band (Operating) Bluetooth: 2.402GHz ~ 2.480GHz SRD_2.4G: 2.402GHz ~ 2.480GHz Hardware Version V1.0 Software Version V1.0 Modulation Type SRD_2.4G: GFSK Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Designation PIFA Antenna Antenna Gain 3.43dBi Minimum Assessment Distance 5mm Evaluation Applied MPE Evaluation SAR Evaluation Report No.: AGC10232250904FH01 Page 6 of 11 3. Test Environment 3.1 Address Of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC-Registration No.: 975832 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files with Registration 975832. IC-Registration No.: 24842(CAB identifier: CN0063) Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the Certification and Engineering Bureau of Industry Canada. The acceptance letter from the IC is maintained in our files with Registration 24842. Report No.: AGC10232250904FH01 Page 7 of 11 3.3 Environmental Conditions Normal Conditions Temperature range (°C) 15 - 35 Relative humidity range 20 % - 75 % Pressure range (kPa) 86 - 106 Power supply DC 3.85V by battery or DC 5V by adapter Report No.: AGC10232250904FH01 Page 8 of 11 4. Portable Device Evaluation Method and Limit Following FCC KDB 447498 D01v06 “General SAR test exclusion guidance” The corresponding SAR Exclusion Threshold condit…

Text truncated - open the document above for the full version.

Page 1 of 51 FCC Test Report Report No.: AGC10232250904FR01 FCC ID : 2AEAN-0614R APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : WIRELESS MICROPHONE CAMERA KIT BRAND NAME : RØDE MODEL NAME : WIRELESS MICRO CAMERA KIT RECEIVER APPLICANT : Rode Microphones DATE OF ISSUE : Oct. 14, 2025 STANDARD(S) : FCC Part 15 Subpart C §15.247 REPORT VERSION : V1.0 Attestation Of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC10232250904FR01 Page 2 of 51 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Oct. 14, 2025 Valid Initial Release Report No.: AGC10232250904FR01 Page 3 of 51 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ................................................................................................................... 6 2.2 Test Frequency List ................................................................................................................................... 6 2.3 Related Submittal(S) / Grant (S) ............................................................................................................... 6 2.4 Test Methodology ...................................................................................................................................... 7 2.5 Special Accessories .................................................................................................................................. 7 2.6 Equipment Modifications ........................................................................................................................... 7 2.7 Antenna Requirement................................................................................................................................ 7 3. Test Environment ............................................................................................................................................ 8 3.1 Address of the Test Laboratory ................................................................................................................. 8 3.2 Test Facility ................................................................................................................................................ 8 3.3 Environmental Conditions ......................................................................................................................... 9 3.4 Measurement Uncertainty ......................................................................................................................... 9 3.5 List of Equipment Use ............................................................................................................................. 10 4.System Test Configuration ............................................................................................................................ 12 4.1 EUT Configuration ................................................................................................................................... 12 4.2 EUT Exercise ........................................................................................................................................... 12 4.3 Configuration of Tested System .............................................................................................................. 12 4.4 Equipment Used In Tested System ........................................................................................................ 13 4.5 Summary of Test Results ........................................................................................................................ 14 5. Description of Test Modes ........................................................................................................................... 15 6. Duty Cycle Measurement ............................................................................................................................. 16 7. RF Output Power Measurement .................................................................................................................. 17 7.1 Provisions Applicable .............................................................................................................................. 17 7.2 Measurement Procedure ......................................................................................................................... 17 7.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 17 7.4 Measurement Result ............................................................................................................................... 18 8. 6dB Bandwidth Measurement ...................................................................................................................... 21 8.1 Provisions Applicable .............................................................................................................................. 21 8.2 Measurement Procedure ......................................................................................................................... 21 8.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 21 8.4 Measurement Results ............................................................................................................................. 22 9. Power Spectral Density Measurement ........................................................................................................ 26 9.1 Provisions Applicable .....................................................................................................................…

Text truncated - open the document above for the full version.

Page 1 of 13 Antenna Test Report Report No.: AGC10232250904PA01 PRODUCT DESIGNATION : WIRELESS MICROPHONE CAMERA KIT BRAND NAME : RØDE MODEL NAME : WIRELESS MICRO CAMERA KIT RECEIVER APPLICANT : RØDE DATE OF ISSUE : Sep. 20, 2025 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC10232250904PA01 Page 2 of 13 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Sep. 20, 2025 Valid Initial release Report No.: AGC10232250904PA01 Page 3 of 13 TABLE OF CONTENTS 1. PRODUCT INFORMATON ...................................................................................................................... 4 2. TEST FACILITY ....................................................................................................................................... 5 3. TEST EQUIPMENT LIST ......................................................................................................................... 5 4. MEASUREMENT UNCERTAINTY .......................................................................................................... 5 5. TEST SUMMARY LIST ............................................................................................................................ 5 6. TEST SETUP ........................................................................................................................................... 6 7. TEST RESULTS ....................................................................................................................................... 7 7.1. VSWR ................................................................................................................................................ 7 7.2. GAIN AND EFFICIENCY ................................................................................................................... 8 7.3. RADIATION PATTERN ...................................................................................................................... 9 APPENDIX A: PHOTOGRAPHS OF TEST SETUP ................................................................................. 11 APPENDIX B: PHOTOGRAPHS OF EUT ................................................................................................ 12 Report No.: AGC10232250904PA01 Page 4 of 13 1. PRODUCT INFORMATON General information Applicant RØDE Address 107 Carnarvon Street, Silverwater, New South Wales, 2128. Australia Manufacturer RØDE Address 107 Carnarvon Street, Silverwater, New South Wales, 2128. Australia Product Designation WIRELESS MICROPHONE CAMERA KIT Brand Name RØDE Test Model WIRELESS MICRO CAMERA KIT RECEIVER Series Model N/A Difference Description N/A Date of test Sep. 16, 2025 Date of Test Sep. 16, 2025 to Sep. 20, 2025 Report Template AGCRT-ER-PA/V1.0 Technical information Frequency Range 2400-2500MHz Test Frequencies 2400MHz, 2410MHz, 2420MHz, 2430MHz, 2440MHz, 2450MHz, 2460MHz, 2470MHz, 2480MHz, 2490MHz, 2500MHz Antenna Type PIFA Antenna Dimensions 5.5mm*5mm Impedance 50Ω Maximum test values Gain: 3.43dBi; Efficiency: 36.34%; VSWR: 1.111 U The above equipment was tested by Attestation of Global Compliance (Shenzhen) Co., Ltd. The test results of this report relate only to the tested sample identified in this report. Prepared By Jack Gui (Project Engineer) Sep. 20, 2025 Reviewed By Bibo Zhang (Reviewer) Sep. 20, 2025 Approved By Angela Li (Authorized Officer) Sep. 20, 2025 Report No.: AGC10232250904PA01 Page 5 of 13 2. TEST FACILITY 3. TEST EQUIPMENT LIST Equipment Manufacturer Model Cal. Date Cal. Due ANTENNA MEASUREMENT SYSTEM ETS-Lindgren AMS-8600 Nov. 27, 2024 Nov. 26, 2025 Network Analyzer R&S ZVL-6 Jul. 24, 2025 Jul. 23, 2026 Test software ETS-Lindgren EMQuest (Ver V1.12) N/A N/A 4. MEASUREMENT UNCERTAINTY The uncertainty is calculated using the methods suggested in the “Guide to the Expression of Uncertainty in measurement” (GUM) published by CISPR and ANSI. - Uncertainty of VSWR, Uc = ±1.5dB - Uncertainty of Gain, Uc = ±0.8dB 5. TEST SUMMARY LIST NO. Test item Remark 1 VSWR -- 2 Gain and efficiency -- 3 Radiation pattern -- Test Site Attestation of Global Compliance (Shenzhen) Co., Ltd Location 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Report No.: AGC10232250904PA01 Page 6 of 13 6. TEST SETUP Report No.: AGC10232250904PA01 Page 7 of 13 7. TEST RESULTS 7.1. VSWR Frequency(MHz) VSWR 2412 1.084 U 2450 1.098 U 2480 1.103 U 2477 1.111 U Report No.: AGC10232250904PA01 Page 8 of 13 7.2. GAIN AND EFFICIENCY Frequency(MHz) Efficiency(dB) Efficiency(%) Gain(dBi) 2400 -5.96 25.34 1.57 2410 -5.77 26.45 1.79 2420 -5.61 27.45 1.91 2430 -5.23 29.94 2.29 2440 -4.81 33.00 2.73 2450 -4.64 34.35 2.95 2460 -4.65 34.25 2.98 2470 -4.76 33.36 2.91 2480 -4.62 34.47 3.12 2490 -4.55 34.99 3.26 2500 -4.39 36.34 3.43 Report No.: AGC10232250904PA01 Page 9 of 13 7.3. RADIATION PATTERN 2D POLAR RADIATION PATTERN FREQUENCY=2400MHZ FREQUENCY=2450MHZ FREQUENCY=2500MHZ Report No.: AGC10232250904PA01 Page 10 of 13 3D RADIATION PATTERN FREQUENCY=2400MHZ FREQUENCY=2450MHZ FREQUENCY=2500MHZ Report No.: AGC10232250904PA01 Page 11 of 13 APPENDIX A: PHOTOGRAPHS OF TEST SETUP Report No.: AGC10232250904PA01 Page 12 of 13 APPENDIX B: PHOTOGRAPHS OF EUT 2.4G Antenna Report No.: AGC10232250904PA01 Page 13 of 13 Conditions of Issuance of Test Reports 1. All samples and goods are accepted by the Attestation of Global Compliance (Shenzhen) Co., Ltd (the “Company”) solely for testing and reporting in accordance with the following terms and conditions. The company provides its services on the basis that such terms and conditions constitute express agreement between the company and any person, firm or company requesting its services (the “Clients”). 2. Any report issued by Company as a result of this application for testing services (the “Report”) shall be issued in confidence to the Clients and the Report will be strictly treated as su…

Text truncated - open the document above for the full version.