2AEAN-0628Video and Audio Production Console

2.911 (d)(7)USA Agent v1.5 Section 2.911(d)(7) USA Agent for Service of Process Company name: Rode Microphones Address: 107 Carnarvon Street, Silverwater 2128, Australia FCC ID: 2AEAN-0628 2.911(d)(7) USA Designated Agent for Service of Process We, [Rode Microphones] (“the applicant”) designate [RODE LLC] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: RODE LLC Address: 2745 Raymond Ave, Signal Hill CA 90755, USA FRN: 0033461500 Contact Name: Doug Marhoffer Telephone No: +1 562 364 7400 Email: [email protected] Applicant Company name: Rode Microphones Address: 107 Carnarvon Street, Silverwater 2128, Australia FRN: 0033490038 Contact Name: Pieter Schillbeeckx Telephone No: 61296485855 Email: [email protected] Signature: Title: General Manager Signature: Title: Head of New Product Development Date: November 20, 2025 Date: November 20, 2025 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-th e-communications-supply-chain-through-the

Rode Microphones 107 Carnarvon Street, Silverwater 2128, Australia Attestation Statements Not Covered Entity Applicant & Not Covered Equipment To: Federal Communications Commission Date: Nov. 20, 2025 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) & (ii) FCC ID: 2AEAN-0628 Rode Microphones (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Pieter Schillbeeckx Title: Head of New Product Development Address: 107 Carnarvon Street, Silverwater 2128, Australia Tel.: 61296485855 Email: [email protected]

Rode Microphones 107 Carnarvon Street, Silverwater 2128, Australia 1 | P a g e Attestation Statements To: Federal Communications Commission Date: Nov. 20, 2025 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Attestation of Compliance with FCC Covered List Software Requirements FCC ID: 2AEAN-0628 Product Name: Video and Audio Production Console This letter serves as an attestation that the equipment identified above ☐ is / ☒ is not (select one) "covered" software as defined under the Federal Communications Commission (FCC) Covered List requirements, as outlined in FCC 22-84 and KDB 986446. Specifically, the undersigned certifies that the equipment for which authorization is sought: 1. Does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors, assignees, parents, subsidiaries, affiliates, or any entity that has rebranded or relabeled software produced by the aforementioned entities. 2. Does not have the capability to store, run, or deliver any software identified on the FCC Covered List, including but not limited to cybersecurity and anti-virus software. To support this attestation, the appendix evaluation documentation has been prepared and is included in the certification filing. This attestation is based on a thorough evaluation of the device's design, functionality, and software environment. The undersigned affirms that the information provided is accurate and complete to the best of their knowledge. Sincerely yours, Applicant Signature Printed Name: Pieter Schillbeeckx Title: Head of New Product Development Address: 107 Carnarvon Street, Silverwater 2128, Australia Tel.: 61296485855 Email: [email protected] Rode Microphones 107 Carnarvon Street, Silverwater 2128, Australia 2 | P a g e Evaluation regarding to the Covered List Software: Compliance Methodology Evaluation Process Results Device is Inherent compliance ☒ The Chipset(s) used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ The Memory used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ There is storage capacity limitation for store or install the Cybersecurity or anti-virus software. Compliance ☒ Operating system used is limited to run, install or deliver the Cybersecurity or anti-virus software. Compliance Device is not Inherent compliance ☐ Evaluation Based on Software Bill of Materials (SBoM) See attached “SBoM“ Note:The SBoM content is limited to the scope of covered list software (e.g. antivirus and cybersecurity software). ☐ Evaluation Based on Scan for Software on the device ☐ Evaluation Based on Filesystem scan ☐ Evaluation Based on Running software check

Rode Microphones 107 Carnarvon Street, Silverwater 2128, Australia Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Nov. 20, 2025 Subject; Request for Confidentiality FCC ID: 2AEAN-0628 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Software Security Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Pieter Schillbeeckx Title: Head of New Product Development

Rode Microphones 107 Carnarvon Street, Silverwater 2128, Australia Nov. 20, 2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: 2AEAN-0628 I, the undersigned, hereby authorize (Attestation of Global Compliance (Shenzhen) Co., Ltd) to act on our behalf in all matters relating to this application for equipment certification. Any act carried out by (Attestation of Global Compliance (Shenzhen) Co., Ltd) shall have the same effect as our own and I acknowledge that all responsibility for complying with the terms and conditions of certification, as specified by DERYCOM CERTIFICATION SERVICES, INC., still resides with Rode Microphones. We certify that we are not subject to a denial of federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862, and that no party to the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sincerely, (Signature) Full name of contact person listed on FCC’s website: Pieter Schillbeeckx Title: Head of New Product Development Tel: 61296485855 Fax: N/A Email: [email protected]

SPECIFICATIONS POLYPROPYLENE COLOUR KEY DIMENSIONAL TOLERANCE MATERIAL MATTE LAMINATION FINISH PRESSURE SENSITIVE ADHESIVE ADHESIVE 0.3 / 0.5 THICKNESS 24 JULY 2025 DATE 0628 - RCV S PROJECT SEE PART DRAWING PARENT PART NUMBER SHEET 11:1A3 SCALE SIZE DRAWING TITLE COMPLIANCE STICKER DRAWING NUMBER RELEASE 0628-0903-01 BASE MATERIAL: 100% BLACK ARTWORK: TO MATCH PANTONE PMS 10454 C x.x ± x.xx ± 0.10 mm 0.05 mm 06 QR CODE CHANGE QR CODE SHOWN ON THIS DRAWING IS FROM RCV. FOR GRAPHIC LOCATION ONLY. RELEASES RELEASE 0101/04/25BILLIE JIANGINITIAL ARTWORK RELEASE 0213/06/25BILLIE JIANGUPDATED BOTTOM LINE DRAWING 0313/06/25BILLIE JIANGPOWER INPUT UPDATE 0418/06/25BILLIE JIANGPRODUCT NAME & STICKER SIZE UPDATED 0519/06/25BILLIE JIANGCOMPLIANCE LAW INFORMATION UPDATED DATE APPROVEDAPPROVERRELEASE DESCRIPTION 0624/07/25BILLIE JIANGADDED QR CODE LOCATION 39 mm 149 mm 5.2 mm 3.6 mm 6.8 mm 7.1 mm FCC ID Label Location

Page 1 of 10 RF Exposure Report Report No.: AGC10232251101FH01 FCC ID : 2AEAN-0628 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Video and Audio Production Console BRAND NAME : RØDE MODEL NAME : RØDECASTER VIDEO S APPLICANT : Rode Microphones DATE OF ISSUE : Nov. 13, 2025 STANDARD(S) : FCC Part 2 Subpart J §2.1091 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC10232251101FH01 Page 2 of 10 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Nov. 13, 2025 Valid Initial Release Report No.: AGC10232251101FH01 Page 3 of 10 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 3. Test Environment ............................................................................................................................................ 6 3.1 Address Of The Test Laboratory ............................................................................................................... 6 3.2 Test Facility ................................................................................................................................................ 6 3.3 Environmental Conditions ......................................................................................................................... 7 4. Mobile Device Evaluation Method and Limit ................................................................................................ 8 5. Measurement Results ..................................................................................................................................... 9 6. Measurement Evaluation ................................................................................................................................ 9 Report No.: AGC10232251101FH01 Page 4 of 10 1. General Information Applicant Rode Microphones Address 107 Carnarvon Street, Silverwater 2128, Australia Manufacturer Rode Microphones Address 107 Carnarvon Street, Silverwater 2128, Australia Factory Rode Microphones Address 107 Carnarvon Street, Silverwater 2128, Australia Product Designation Video and Audio Production Console Brand Name RØDE Test Model RØDECASTER VIDEO S Series Model(s) N/A Difference Description N/A Date of receipt of test item Nov. 03, 2025 Date of Test Nov. 03, 2025~ Nov. 12, 2025 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure-V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Jack Gui (Project Engineer) Nov. 13, 2025 Reviewed By Bibo Zhang (Reviewer) Nov. 13, 2025 Approved By Angela Li (Authorized Officer) Nov. 13, 2025 Report No.: AGC10232251101FH01 Page 5 of 10 2. Product Information 2.1 Product Technical Description Frequency Band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5.825GHz Bluetooth: 2.402GHz ~ 2.480GHz Hardware Version V1.0 Software Version V1.0 Modulation Type 2.4G WLAN: 802.11b:(DQPSK, DBPSK, CCK) DSSS 802.11g/n:(64-QAM,16-QAM, QPSK, BPSK) OFDM 5G WLAN: 802.11a/n:(64-QAM, 16-QAM, QPSK, BPSK) OFDM BT_BLE: GFSK 1Mbps GFSK 2Mbps BT_BR_EDR: GFSK, EDR π /4-DQPSK, 8DPSK Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Designation BT: PCB Antenna 2.4GWIFI: PIFA Antenna 5GWIFI: PIFA Antenna Antenna Gain BT: -3.43dBi 2.4GWIFI: Ant1: 1.28dBi, Ant2:1.28dBi 5GWIFI: Ant1:3.80dBi, Ant2:3.80dBi Minimum Assessment Distance 20cm Evaluation Applied MPE Evaluation SAR Evaluation Report No.: AGC10232251101FH01 Page 6 of 10 3. Test Environment 3.1 Address Of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC-Registration No.: 975832 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files with Registration 975832. IC-Registration No.: 24842(CAB identifier: CN0063) Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the Certification and Engineering Bureau of Industry Canada. The acceptance letter from the IC is maintained in our files with Registration 24842. Report No.: AGC10232251101FH01 Page 7 of 10 3.3 Environmental Conditions Normal Conditions Temperature range (°C) 15 - 35 Relative humidity ran…

Text truncated - open the document above for the full version.

Page 1 of 79 FCC Test Report Report No.: AGC10232251101FR01 FCC ID : 2AEAN-0628 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Video and Audio Production Console BRAND NAME : RØDE MODEL NAME : RØDECASTER VIDEO S APPLICANT : Rode Microphones DATE OF ISSUE : Nov. 13, 2025 STANDARD(S) : FCC Part 15 Subpart C §15.247 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC10232251101FR01 Page 2 of 79 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Nov. 13, 2025 Valid Initial Release Report No.: AGC10232251101FR01 Page 3 of 79 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ................................................................................................................... 6 2.2 Test Frequency List ................................................................................................................................... 6 2.3 Related Submittal(S) / Grant (S) ............................................................................................................... 7 2.4 Test Methodology ...................................................................................................................................... 7 2.5 Receiver Input Bandwidth ......................................................................................................................... 7 2.6 Equally Average Use of Frequencies and Behaviour. ............................................................................. 7 2.7 Pseudorandom Frequency Hopping Sequence ........................................................................................ 8 2.8 Special Accessories .................................................................................................................................. 9 2.9 Equipment Modifications ........................................................................................................................... 9 2.10 Antenna Requirement ............................................................................................................................. 9 3. Test Environment .......................................................................................................................................... 10 3.1 Address of The Test Laboratory .............................................................................................................. 10 3.2 Test Facility .............................................................................................................................................. 10 3.3 Environmental Conditions ....................................................................................................................... 11 3.4 Measurement Uncertainty ....................................................................................................................... 11 3.5 List of Equipment Used ........................................................................................................................... 12 4.System Test Configuration ............................................................................................................................ 13 4.1 EUT Configuration ................................................................................................................................... 13 4.2 EUT Exercise ........................................................................................................................................... 13 4.3 Configuration of Tested System .............................................................................................................. 13 4.4 Equipment Used in Tested System ......................................................................................................... 14 4.5 Summary of Test Results ........................................................................................................................ 15 5. Description of Test Modes ........................................................................................................................... 16 6. RF Output Power Measurement .................................................................................................................. 18 6.1 Provisions Applicable .............................................................................................................................. 18 6.2 Measurement Procedure ......................................................................................................................... 18 6.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 18 6.4 Measurement Result ............................................................................................................................... 19 7. 20dB Bandwidth and 99% Occupied Bandwidth Measurement ............................................................... 25 7.1 Provisions Applicable .............................................................................................................................. 25 7.2 Measurement Procedure ......................................................................................................................... 25 7.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 25 7.4 Measurement Results ............................................................................................................................. 26 8. Conducted Band Edge and Out-of-Band Emissions ....................…

Text truncated - open the document above for the full version.

Report No.: AGC10232251101FR01 Page 71 of 79 12. Frequency Separation Measurement 12.1 Provisions Applicable When the power is less than 0.125W: The minimum permissible channel separation for this system is 2/3 the value of the 20dB BW. When the power is less than 1W: The minimum permissible channel separation for this system is 20dB BW. 12.2 Measurement Procedure The EUT shall have its hopping function enabled. Use the following spectrum analyzer settings: 1. Span: Wide enough to capture the peaks of two adjacent channels. 2. RBW: Start with the RBW set to approximately 30% of the channel spacing; adjust as necessary to best identify the center of each individual channel. 3. Video (or average) bandwidth (VBW) ≥ RBW. 4. Sweep: Auto. 5. Detector function: Peak. 6. Trace: Max hold. g) Allow the trace to stabilize. 7. Use the marker-delta function to determine the separation between the peaks of the adjacent channels. 12.3 Measurement Setup (Block Diagram of Configuration) 12.4 Measurement Result Test Data of Frequency Separation Test Mode Channel Separation (MHz) Limits (MHz) Pass or Fail GFSK 0.997 0.639 Pass π /4-DQPSK 1.012 0.855 Pass 8DPSK 0.923 0.865 Pass Report No.: AGC10232251101FR01 Page 72 of 79 Test Graphs of Frequency Separation Test_Graph_BR_HOP_ANT1_NA_1Mbps_Hopping Separation Test_Graph_EDR_HOP_ANT1_NA_2Mbps_Hopping Separation Report No.: AGC10232251101FR01 Page 73 of 79 Test_Graph_EDR_HOP_ANT1_NA_3Mbps_Hopping Separation Report No.: AGC10232251101FR01 Page 74 of 79 13. AC Power Line Conducted Emission Test 13.1 Measurement Limit Frequency Maximum RF Line Voltage Q.P. (dBμV) Average (dBμV) 150kHz~500kHz 66-56 56-46 500kHz~5MHz 56 46 5MHz~30MHz 60 50 Note: 1. The lower limit shall apply at the transition frequency. 2. The limit decreases linearly with the logarithm of the frequency in the range 0.15 MHz to 0.50 MHz. 13.2 Measurement Setup (Block Diagram of Configuration) Report No.: AGC10232251101FR01 Page 75 of 79 13.3 Preliminary Procedure of Line Conducted Emission Test 1. The equipment was set up as per the test configuration to simulate typical actual usage per the user’s manual. When the EUT is a tabletop system, a wooden table with a height of 0.8 meters is used and is placed on the ground plane as per ANSI C63.10 (see Test Facility for the dimensions of the ground plane used). When the EUT is a floor-standing equipment, it is placed on the ground plane which has a 3-12 mm non-conductive covering to insulate the EUT from the ground plane. 2. Support equipment, if needed, was placed as per ANSI C63.10. 3. All I/O cables were positioned to simulate typical actual usage as per ANSI C63.10. 4. All support equipment received AC120V/60Hz power from a LISN, if any. 5. The EUT received DC 20V power from adapter which received AC120V/60Hz power from a LISN. 6. The test program was started. Emissions were measured on each current carrying line of the EUT using a spectrum Analyzer / Receiver connected to the LISN powering the EUT. The LISN has two monitoring points: Line 1 (Hot Side) and Line 2 (Neutral Side). 7. Two scans were taken: one with Line 1 connected to Analyzer / Receiver and Line 2 connected to a 50 ohm load; the second scan had Line 1 connected to a 50 ohm load and Line 2 connected to the Analyzer / Receiver. 8. Analyzer / Receiver scanned from 150 kHz to 30MHz for emissions in each of the test modes. 9. During the above scans, the emissions were maximized by cable manipulation. 10. The test mode(s) were scanned during the preliminary test. 11. Then, the EUT configuration and cable configuration of the above highest emission level were recorded for reference of final testing. 13.4 Final Procedure of Line Conducted Emission Test 1. EUT and support equipment was set up on the test bench as per step 2 of the preliminary test. 2. A scan was taken on both power lines, Line 1 and Line 2, recording at least the six highest emissions. Emission frequency and amplitude were recorded into a computer in which correction factors were used to calculate the emission level and compare reading to the applicable limit. 3. If EUT emission level was less –2dB to the A.V. limit in Peak mode, then the emission signal was re-checked using Q.P and Average detector. 4. The test data of the worst case condition(s) was reported on the Summary Data page. 5. A conducted emission is calculated by the following equation: • Measurement Level (dBμV) = Receiver reading (dBμV) + Transd (dB) • Transd (dB)= AMN Factor(dB)+Cable Loss(dB)+Attenuation(dB) • Margin= Limit-Level Report No.: AGC10232251101FR01 Page 76 of 79 13.5 Measurement Result: AC Power Line Conducted Emission Test Test Mode Mode 1 LISN Line Hot Side Result: Pass Report No.: AGC10232251101FR01 Page 77 of 79 AC Power Line Conducted Emission Test Test Mode Mode 1 LISN Line Neutral Side Result: Pass Report No.: AGC10232251101FR01 Page 78 of 79 Appendix I: Photographs of Test Setup Refer to the Report No.: AGC10232251101AP01 Appendix II: Photographs of Test EUT Refer to the Report No.: AGC10232251101AP02 Report No.: AGC10232251101FR01 Page 79 of 79 Conditions of Issuance of Test Reports 1. All samples and goods are accepted by the Attestation of Global Compliance (Shenzhen) Co., Ltd (the “Company”) solely for testing and reporting in accordance with the following terms and conditions. The company provides its services on the basis that such terms and conditions constitute express agreement between the company and any person, firm or company requesting its services (the “Clients”). 2. Any report issued by Company as a result of this application for testing services (the “Report”) shall be issued in confidence to the Clients and the Report will be strictly treated as such by the Company. It may not be reproduced either in its entirety or in part and it may not be used for advertising or other unauthorized purposes without the written consent of the Company. The Clients to whom the Report is issued may, however, show or send it, or a certified co…

Text truncated - open the document above for the full version.

Page 1 of 15 AntennaTestReport ReportNo.:AGC10232251003PA01 PRODUCTDESIGNATION:VideoandAudioProductionConsole BRANDNAME:RØDE MODELNAME:RØDECASTERVIDEOS APPLICANT:RØDE DATEOFISSUE:Oct.15,2025 REPORTVERSION:V1.0 AttestationofGlobalCompliance(Shenzhen)Co.,Ltd ReportNo.:AGC10232251003PA01 Page2of15 ReportReviseRecord ReportVersionReviseTimeIssuedDateValidVersionNotes V1.0/Oct.15,2025ValidInitialRelease ReportNo.:AGC10232251003PA01 Page3of15 TableofContents 1.GeneralInformation..........................................................................................................................................4 2.ProductTechnicalInformation........................................................................................................................5 3.TestSummaryList............................................................................................................................................5 4.TestEnvironment..............................................................................................................................................6 4.1AddressofTheTestLaboratory..................................................................................................................6 4.2TestFacility..................................................................................................................................................6 4.3EnvironmentalConditions...........................................................................................................................7 4.4MeasurementUncertainty...........................................................................................................................7 4.5ListofEquipmentUsed...............................................................................................................................7 5.AntennaPassiveMeasurementResults.....................................................…

Text truncated - open the document above for the full version.