2AEFTAW111TWireless Expansion Microphone

Quick Start Guide AW111 EnglishČeština DeutschPусский Français ภาษาไทย Italiano 繁體中文 Español 简体中文 Nederlands 한국어 Polski 日本語 2 Disclaimer All pictures contained in this documentation are example images only. The images may vary depending on the product and software version. Information presented in this documentation has been carefully checked for reliability; however, no responsibility is assumed for inaccuracies. The information contained in this documentation is subject to change without notice. Copyright and Trademark Information © 2024 by AVerMedia Technologies, Inc. All rights reserved. No part of this publication, in whole or in part, may be reproduced, transmitted, transcribed, altered or translated into any language in any form by any means without the written permission of AVerMedia Technologies, Inc. Information and specification contained in this manual are subject to change without notice and do not represent a commitment on the part of AVerMedia. For more information, please visit www.avermedia.com. AVerMedia is a trademark or registered trademark of AVerMedia Technologies, Inc. Headquarters Address No.135, Jian 1st Rd., Zhonghe Dist., New Taipei City 23585, Taiwan Website www.avermedia.com Support www.avermedia.com/support Telephone +886-2-2226-3630 US Office Address 754 Charcot Avenue, San Jose, CA 95131, United States Website www.avermedia.com/us Europe Office Address Hanauer Landstrasse 291 B, 60314 Frankfurt Hessen, Germany 國際總部 地址 23585 新北市中和區建一路 135 號 網址 www.avermedia.com 支援 www.avermedia.com/support 電話 +886-2-2226-3630 中国子公司 地址 上海市陈行公路 2388 号 2 号楼 903 室 网址 www.avermedia.cn 电话 +86-21-52987985 Japan Office Address 10F TOWA akihabara Bldg. 1-8 Akihabara, Taito-ku, Tokyo, 110-0006 Japan Website www.avermedia.co.jp Support www.avermedia.co.jp/support 3 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Follow all instructions. 4. Heed all warnings. 5. Do not use the apparatus on uneven or unstable surfaces. 6. Do not use this apparatus in a wet environment or near water. 7. Unplug the apparatus before cleaning. Clean only with a dry cloth. 8. Use in a well ventilated environment. Do not block any ventilation openings. 9. Use the apparatus within ambient temperatures 32–104°F (0–40°C). 10. Use power sources within the specified voltage range. 11. Do not place heavy objects on the apparatus. 12. Do not install near heat sources such as radiators or stoves. 13. Do not defeat the safety purposes of the polarized or grounding-type plug. 14. Protect the power cord from being walked on or pinched, particularly where the cord connects with plugs or adapters. 15. Only use the attachments and accessories specified by the manufacturer. 16. Unplug this apparatus during lightning. 17. Do not modify or disassemble the apparatus in any way. 18. Refer all servicing to AVerMedia Customer Service. 19. Do not dispose of the apparatus as general household waste. Dispose in accordance with local environmental laws. Lithium Polymer Battery • Attempting to disassemble or modify the battery can cause an explosion or liquid leakage from the battery. If the rechargeable battery is incorrectly replaced, there is danger of an explosion. • The battery contains a small amount of harmful substances. To avoid possible injury, replace it with a battery type recommended by AVerMedia. • The battery’s working temperature is between 0°C and 35°C, be sure to operate the device within this range. Do not expose it to direct sunlight as it could cause overheating, rupture, or even fire. • Even if the battery is fully charged and not in use, it will still discharge gradually over time. If you haven’t used the device for a while, it is recommended to recharge it before use. • Batteries are consumable supplies. Their power capacities degrade gradually after repeated charging. Therefore, even when you charge it fully every time, the usage time will still reduce and batteries will eventually die out. • When the device is in use or charging, it is normal for it to get warm. • Never charge the battery unattended. During the entire process of charging your battery, you must constantly observe and monitor the charging process so that you can quickly react to any problems that may occur and to be certain that the battery is being charged properly. • The battery should be stored at room temperature, charged to approximately 30 to 50% of capacity at least once per year to prevent over-discharge. • Do not discharge the battery at a rate exceeding the maximum continuous discharge current specified for it. Otherwise, the battery will overheat and result in battery deterioration, bursting, ballooning, or possibly cause a fire or explosion. 4 重要安全说明 1. 仔细阅读这些说明。 2. 妥善保存这些说明。 3. 遵守所有的指示。 4. 注意所有的警告。 5. 请勿将本产品安装于不平稳的表面。 6. 请勿在潮湿或靠近水的地方使用本产 品。 7. 清洁前请拔除电源。仅使用干布清 洁。 8. 请于通风的环境使用本产品。请勿堵 住通风口。 9. 请于规格温度范围 32–104°F (0–40°C) 使用本产品。 10. 请使用额定电压范围内的电源。 11. 请勿放置重物于本产品上。 12. 请勿安装于热源附近如暖器或火炉 旁。 13. 请勿破坏极性或接地插头的安全防护 设计。 14. 请保护电源线，勿使其被踩踏或碾 压，特别是与插头或变压器的连接 处。 15. 仅使用制造商指定的配件及零件。 16. 打雷时请拔除电源。 17. 请勿以任何方式改造或拆解本产品。 18. 如需维修请洽本公司客服人员。 19. 请勿当作家庭垃圾任意丢弃。请遵从 当地环境法规妥善处理。 一般电池的使用方法 • 请勿使电池短路。 • 请将电池置放于阴凉、干燥的地方。 • 请将电池置于儿童无法触及之处。 • 请将电池远离火源。 • 当电池有损坏，发出异味，变色、变 形、或开始膨胀、漏电池液，请立即 停止使用或停止充电。 • 请勿在车内或高温度环境储存电池或 充电。温度过高可能点燃电池，导致 火灾。 • 请勿将电池丢入以掩埋方式处理的垃 圾中。处理电池时，请遵照当地的法 令或法规。 重要安全說明 1. 仔細閱讀這些說明。 2. 妥善保存這些說明。 3. 遵守所有的指示。 4. 注意所有的警告。 5. 請勿將本產品安裝於不平穩的表面。 6. 請勿在潮濕或靠近水的地方使用本產 品。 7. 清潔前請拔除電源。僅使用乾布清 潔。 8. 請於通風的環境使用本產品。請勿堵 住通風口。 9. 請於規格溫度範圍 32–104°F (0–40°C) 使用本產品。 10. 請使用額定電壓範圍內的電源。 11. 請勿放置重物於本產品上。 12. 請勿安裝於熱源附近如暖器或火爐 旁。 13. 請勿破壞極性或接地插頭的安全防護 設計。 14. 請保護電源線，勿使其被踩踏或碾 壓，特別是與插頭或變壓器的連接 處。 15. 僅使用製造商指定的配件及零件。 16. 打雷時請拔除電源。 17. 請勿以任何方式改造或拆解本產品。 18. 如需維修請洽本公司客服人員。 19. 請勿當作家庭垃圾任意丟棄。請遵從 當地環境法規妥善處理。 一般電池的使用方法 • 請勿使電池短路。 • 請將電池置放於陰涼、乾燥的地方。 • 請將電池置於兒童無法觸及之處。 • 請將電池遠離火源。 • 當電池有損壞，發出異味，變色、變 形、或開始膨脹、漏電池液，請立即 停止使用或停止充電。 • 請勿在車內或高溫度環境儲存電池或 充電。溫度過高可能點燃電池，導致 火災。 • 請勿將電池丟入以掩埋方式處理的垃 圾中。處理電池時，請遵照當地的法 令或法規。 5 EN Overview (AW111T) Inside the Box USB Typ…

Text truncated - open the document above for the full version.

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: June 18, 2024 Ref: Attestation Statements Part 2.911(d)(7) Filing AVerMedia Technologies, Inc.(“the applicant”) certifies that, as of the date of the filing of the application, AVerMedia Technologies, Inc. USA Office is our designated U.S. agent for service of process for the FCC application. AVerMedia Technologies, Inc.accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. AVerMedia Technologies, Inc. USA Office accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the FCC application. Sincerely, Designated U.S. Agent Information: Name: AVerMedia Technologies, Inc. USA Office FRN: 0029625779 Contact Person: Jesse Lin Address: 754 Charcot Avenue, San Jose, CA 95131 Tel.: (510) 403-0006 112 Email: [email protected] U.S. Agent Signature: Applicant: Company Name: AVerMedia Technologies, Inc. Grantee Code: 2AEFT FRN: 0024449530 Contact Name: Ken Yang Address: No.135, Jian 1st Rd., Zhonghe Dist., New Taipei City 23585, Taiwan Tel.: +886-2-2226-3630 Email: [email protected] Applicant Signature:

This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page 1 / 13 Project No: TM-2403000503P Rev. 01 APPENDIX 1 - PHOTOGRAPHS OF EUT EXTERNAL PHOTOGRAPHS OF EUT This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page 2 / 13 Project No: TM-2403000503P Rev. 01 This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page 3 / 13 Project No: TM-2403000503P Rev. 01 This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page 4 / 13 Project No: TM-2403000503P Rev. 01 This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page 5 / 13 Project No: TM-2403000503P Rev. 01 USB cable

7 5 俲贫
""8%,⿮罌俲贫
""4%+勞颶

⿾ꋓ륌 랱蒀皿ⵘ ꪓ
1Ⱇ䊴
pNN
6TFS
&YQFSJFODF
%FQBSUNFOU %FTJHO
&WB
-JV %BUF
 7FSTJPO
" 4IFFU

PG
 6OJU
NN 5IJT
DPOEFOUJBM
EPDVNFOU
JT
UIF
QSPQFSUZ
PG
"7FS.FEJB
$PSQ
UIFSFGPSF
TIBMM
OPU
CF
DPQJFE
PS
DJSDVMBUFE
XJUIPVU
QFSNJTTJPO  ""8%,@"85@1SPEVDU
4UJDLFS CAN ICES-3(B)/NMB-3(B)FCC ID: 2AEFTAW111T .PEFM

㘗贫

㘗〿

㘗殤

"85搂箁䒂⠽띋⯘괐

偽絁䒂⠽띌⯘굥

ٙ؎َٖأ䭂䓹و؎ؙ3BUJOH

鱒Ⰵ⿮侸

鳖Ⰵ⿬侨

7





" "7FS.FEJB
5FDIOPMPHJFT
*OD
/P
+JBO
TU
3E
;IPOHIF
%JT U /FX
5BJQFJ
$JUZ

5BJXBO

3URIHVVLRQDO&RQQHFWLRQV:LUHOHVV([SDQVLRQ0LFURSKRQH $$:'. .BEF
JO
5BJXBO

欴㖒

〵抓

❡㖒

〵弩 "UUFOUJPO

岤䠑

8BSSBOUZ
WPJE
JG
UIF
DBTF
PQFOFE锞⺡䬓鍑劥欴ᄩ
⟃⯝鸤䧭⥃㔿搂佪 SN label area25*7 mm $$"*-9999999 NCC Label Area (13*4mm) 59 29 R2*3

This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page 6 / 13 Project No: TM-2403000503P Rev. 01 INTERNAL PHOTOGRAPHS OF EUT This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page 7 / 13 Project No: TM-2403000503P Rev. 01 This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page 8 / 13 Project No: TM-2403000503P Rev. 01 This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page 9 / 13 Project No: TM-2403000503P Rev. 01 This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page 10 / 13 Project No: TM-2403000503P Rev. 01 Module RF IC & Crystal This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page 11 / 13 Project No: TM-2403000503P Rev. 01 Antenna This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page 12 / 13 Project No: TM-2403000503P Rev. 01 Battery This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page 13 / 13 Project No: TM-2403000503P Rev. 01

Project No: TM-2403000503P FCC ID: 2AEFTAW111T Page 1 / 13 Report No.: TMWK2403000950KS Rev.: 01 No.11, Wugong 6th Rd., Wugu Dist., New Taipei City , Taiwan /新北市五股區五工六路11號 t:(886-2) 2299-9720 f:(886-2) 2299-9721 www.sgs.com.tw Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Compliance Certification Services Inc. 程智科技股份有限公司 Member of the SGS Group RF Exposure Evaluation Report FCC 47 CFR § 2.1091 for Wireless Expansion Microphone Model Name.: AW111, AW111T, AW111uvwxyz (The “u”~”z” in the models could be defined as A~Z, 0~9, -, + or blank) Prepared for: AVerMedia Technologies, Inc. No.135, Jian 1st Rd., Zhonghe Dist., New Taipei City 23585, Taiwan Prepared by Compliance Certification Services Inc. Wugu Laboratory No.11, Wugong 6th Rd., Wugu Dist., New Taipei City, Taiwan. Issue Date: June 26, 2024 Note: This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF, NIST or any government agencies. The test results in the report only apply to the tested sample. This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page 2 / 13 Report No.: TMWK2403000950KS Rev.: 01 Revision History Rev. Issue Date Revisions Effect Page Revised By 00 June 6, 2024 Initial Issue ALL Peggy Tsai 01 June 26, 2024 See the following Note Rev.(01) P. 6, 7, 12 Peggy Tsai Note: Rev.(01) 1. Modify hardware version to AW111. 2. Modify modulation type to FSK. This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page 3 / 13 Report No.: TMWK2403000950KS Rev.: 01 Table of Contents 1 ATTESTATION OF TEST RESULTS ............................................................................. 4 2 TEST SPECIFICATION, METHODS AND PROCEDURES ............................................ 5 3 DEVICE UNDER TEST (DUT) INFORMATION .............................................................. 6 3.1 DUT DESCRIPTION .............................................................................................. 6 3.2 WIRELESS TECHNOLOGIES ............................................................................... 7 4 MAXIMUM PERMISSIBLE EXPOSURE ......................................................................... 8 4.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) ................................ 8 4.2 MPE CALCULATION METHOD ............................................................................. 9 4.3 MPE EXEMPTION ............................................................................................... 10 4.4 MULTIPLE RF SOURCES ................................................................................... 11 5 MPE EXEMPTION OPTION B ...................................................................................... 12 6 FACILITIES .................................................................................................................. 13 This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page 4 / 13 Report No.: TMWK2403000950KS Rev.: 01 1 Attestation of Test Results Applicant Name Wireless Expansion Microphone Model Name AW111, AW111T, AW111uvwxyz (The “u”~”z” in the models could be defined as A~Z, 0~9, -, + or blank) Applicable Standards FCC 47 CFR § 2.1091 FCC 47 CFR § 1.1307 FCC 47 CFR § 1.1310 Published RF exposure KDB procedures Receive EUT Date: April 3, 2024 Compliance Certification Services Inc. , tested the above equipment in accordance with the requirements set forth in the above standards. Determination of compliance is based on the results of the compliance measurement,not taking into account measurement instrumentation uncertainy.All indications of Pass/Fail in this report are opinions expressed by Compliance Certification Services Inc, based on interpretations and/or observations of test results. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Approved & Released By: Sky Zhou Asst. Section Manager Compliance Certification Services Inc. This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page 5 / 13 Report No.: TMWK2403000950KS Rev.: 01 2 Test Specification, Methods and Procedures The tests documented in this report were performed in accordance with FCC 47 CFR § 2.1091, the following FCC Published RF exposure KDB procedures: o 447498 D04 Interim General RF Exposure Guidance v01 o 865664 D02 RF Exposure Reporting v01r02 This document cannot be reproduce…

Text truncated - open the document above for the full version.

5135MHz Antenna Brand: Everestek Antenna Model: ETK52 Max Gain: 3.49dBi Antenna Type: PCB antenna Manufacturer : EVERESTEK INC. Address :2 F.-1, No. 5, Taiyuan 1st St., Zhubei City, Hsinchu County 302082, Taiwan (R.O.C.) Reference Design 5250MHz 5725MHz 5840MHz Everestek Inc. EW21SEN-TX/RX PCB Antenna Pattern  Dimension  Gain Frequency (MHz) Gain X-Y (dBi) Gain Z-XY (dBi) 5135 2.84 2.84 5250 2.96 2.96 5725 3.4 3.4 5840 3.49 3.49

Project No: TM-2403000503P FCC ID: 2AEFTAW111T Page: 1 / 44 Report No.: TMWK2403000949KR Rev.: 02 No.11, Wugong 6th Rd., Wugu Dist., New Taipei City , Taiwan /新北市五股區五工六路11號 t:(886-2) 2299-9720 f:(886-2) 2299-9721 www.sgs.com.tw Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Compliance Certification Services Inc. 程智科技股份有限公司 Member of the SGS Group RADIO TEST REPORT FCC 47 CFR PART 15 SUBPART E Test Standard FCC Part 15.407 Brand name AVerMedia Applicant AVerMedia Technologies, Inc. Product name Wireless Expansion Microphone Model No. AW111, AW111T, AW111uvwxyz (The “u”~”z” in the models could be defined as A~Z, 0~9, -, + or blank) Test Result Pass Statements of Conformity Determination of compliance is based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. The test Result was tested by Compliance Certification Services Inc. The test data, data evaluation, test procedures, and equipment configurations shown in this report were given in ANSI C63.10: 2013 and compliance standards. The test results of this report relate only to the tested sample (EUT) identified in this report. The test Report of full or partial shall not copy. Without written approval of Compliance Certification Services Inc.(Wugu Laboratory) Approved by: Sehni Hu Supervisor This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page: 2 / 44 Report No.: TMWK2403000949KR Rev.: 02 Revision History Rev. Issue Date Revisions Effect Page Revised By 00 June 6, 2024 Initial Issue ALL Peggy Tsai 01 June 13, 2024 See the following Note Rev.(01) P.4, 8, 10, 29, 32-45 , A-1,A-3-A-5 Peggy Tsai 02 June 26, 2024 See the following Note Rev.(02) P.4, 5, 10,11, 15, 20, 21, 23, 26,31-44 Peggy Tsai Note: Rev.(01) 1. Modify power supply in section 1.1. 2. Modify instrument calibration in section 1.6. 3. Modify test set up diagram in section 1.8. 4. Modify test procedure in section 4.5.2. 5. Modify operation band in section 4.5.4. 6. Modify test photo in appendix 1. Rev.(02) 1. Modify HW Version to AW111. 2. Modify modulation type to FSK. 3. Modify support and EUT accessories equipment in section 1.7. 4. Modify test set up diagram in section 1.8. This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page: 3 / 44 Report No.: TMWK2403000949KR Rev.: 02 Table of contents 1. GENERAL INFORMATION .................................................................................................. 4 1.1 EUT INFORMATION ............................................................................................................ 4 1.2 EUT CHANNEL INFORMATION .......................................................................................... 5 1.3 ANTENNA INFORMATION .................................................................................................. 6 1.4 MEASUREMENT UNCERTAINTY ....................................................................................... 6 1.5 FACILITIES AND TEST LOCATION .................................................................................... 7 1.6 INSTRUMENT CALIBRATION ............................................................................................. 8 1.7 SUPPORT AND EUT ACCESSORIES EQUIPMENT ......................................................... 10 1.8 TEST SET UP DIAGRAM .................................................................................................. 11 1.9 TEST PROGRAM ............................................................................................................... 11 1.10TEST METHODOLOGY AND APPLIED STANDARDS .................................................... 11 2. TEST SUMMERY ............................................................................................................... 12 3. DESCRIPTION OF TEST MODES ..................................................................................... 13 3.1 THE WORST MODE OF OPERATING CONDITION .......................................................... 13 3.2 THE WORST MODE OF MEASUREMENT ........................................................................ 14 3.3 EUT DUTY CYCLE ............................................................................................................ 15 4. TEST RESULT ................................................................................................................... 16 4.1 AC POWER LINE CONDUCTED EMISSION ..................................................................... 16 4.2 6DB BANDWIDTH AND OCCUPIED BANDWIDTH(99%) ................................................. 19 4.3 OUTPUT POWER MEASUREMENT ...............…

Text truncated - open the document above for the full version.

This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page: A-1 / A-5 Report No.: TMWK2403000949KR Rev.: 02 APPENDIX 1- Test Photo Radiation (9kHz ~ 30MHz) Radiation (30MHz ~ 1GHz) This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page: A-2 / A-5 Report No.: TMWK2403000949KR Rev.: 02 Radiation (Above 1GHz) This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page: A-3 / A-5 Report No.: TMWK2403000949KR Rev.: 02 Conducted Emission Set up Photo This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page: A-4 / A-5 Report No.: TMWK2403000949KR Rev.: 02 Conduction This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page: A-5 / A-5 Report No.: TMWK2403000949KR Rev.: 02