2AEFTAW313TSmart Microphone

English Quick Guide AW313 Wireless Teacher Microphone Disclaimer All the screen shots in this documentation are only example images. The images may vary depending on the product and software version. Information presented in this documentation has been carefully checked for reliability; however, no responsibility is assumed for inaccuracies. The information contained in this documentation is subject to change without notice. Copyright and Trademark Information ©2015 by AVerMedia Technologies, Inc. All rights reserved. No part of this publication, in whole or in part, may be reproduced, transmitted, transcribed, altered or translated into any language in any form by any means without the written permission of AVerMedia Technologies, Inc. Information and specification contained in this manual are subject to change without notice and do not represent a commitment on the part of AVerMedia. For more information, please refer to www.avermedia.com. "AVerMedia" is a trademark or registered trademark of AVerMedia Technologies, Inc.The pictures contained in this manual are provided for reference purposes only. Made in Taiwan (Except Accessories). US Office Address 47358 Fremont Blvd., Fremont, CA 94538 Website www.avermedia-usa.com Telephone (408)-263-3828 Headquarters Address No.135, Jian 1st Rd., Zhonghe Dist., New Taipei City 23585, Taiwan Website http://www.avermedia.com Telephone +886-2-2226-3630 v1.0 10/2015 Important Safety Instructions and Disclaimer WARNING: Failure to follow these safety instructions could result in fire, electric shock, other injury or damage to device or other property, and/or loss of life. AVerMedia is not responsible for damage or injury arising from failure to follow safety instructions relating to the product’s use. General Guidelines and Warning Read and follow these instructions.• Do not use the device on uneven or unstable surfaces.• Do not use this device in a wet environment or near water.• Unplug the device before cleaning. Clean only with a dry cloth.• Use in a well ventilated environment. Do not block any ventilation openings.• Use the device within the specified temperature range.• Use power sources within the specified voltage range.• Do not place heavy objects on the device.• Do not install near heat sources such as radiators or stoves.• Do not defeat the safety purposes of the polarized or grounding-type plug. • Protect the power cord from being walked on or pinched, particularly where the • cord connects with plugs or adapters. Only use the attachments and accessories specified by the manufacturer.• Unplug this device during lightning storms or when unused for prolonged time.• Do not modify or disassemble the device in any way.• Refer all servicing to qualified personnel.• Do not dispose the device as general household waste. Dispose in accordance • with local environmental laws. General Battery Instructions Never short circuit the battery terminals.• Store the batteries in a cool dry place.• Keep the battery away from children.• Keep the battery away from fire.• Stop using or charging the battery immediately if the battery becomes or appears • damaged, gives off an odor, becomes discolored or deformed, starts to balloon or swell, leaks. Never store or charge the battery inside your car or in extreme temperature. • Extreme temperatures might ignite the battery and cause fire. Do not dispose of used batteries in domestic waste. Dispose of batteries at special • collection points or return to point of sale if applies. Lithium Polymer Battery Attempting to disassemble or modify the battery can cause an explosion or liquid • leakage from the battery. If the rechargeable battery is incorrectly replaced, there is danger of an explosion. The battery contains a small amount of harmful substances. To avoid possible • injury, replace it with a battery type recommended by AVerMedia. The battery’s working temperature is between 0°C and 35°C, be sure to operate • the device within this range. Do not expose it to direct sunlight as it could cause overheating, rupture, or even fire. Even if the battery is fully charged and not in use, it will still discharge gradually • over time. If you haven’t used the device for a while, it is recommended to recharge it before use. Batteries are consumable supplies. Their power capacities degrade gradually after • repeated charging. Therefore, even when you charge it fully every time, the usage time will still reduce and batteries will eventually die out. When the device is in use or charging, it is normal for it to get warm.• Never charge the battery unattended. During the entire process of charging your • battery, you must constantly observe and monitor the charging process so that you can quickly react to any problems that may occur and to be certain that the battery is being charged properly. The battery should be stored at room temperature, charged to approximately 30 to • 50% of capacity at least once per year to prevent over-discharge. Do not discharge the battery at a rate exceeding the maximum continuous • discharge current specified for it. Otherwise, the battery will overheat and result in battery deterioration, bursting, ballooning, or possibly cause a fire or explosion. Limited Warranty AVerMedia warrants that the Product is free from defects in material and/or workmanship under normal use. AVerMedia does not warrant that the operation of the Product will be uninterrupted or error-free. The Limited Warranty does not cover: The warranty period has expired;• Product that has (a) serial numbers or the warranty sticker that have been removed • tampered, damaged or altered, or (b) nonconforming. Product purchased from an unauthorized distributor;• Product has been tested, altered, modified, repaired or serviced by someone other • than AVerMedia (or its authorized service centers); Failure to adhere to user’s manual.• Product that are operated in combination with third party’s software which may be • obtained by user or pro…

Text truncated - open the document above for the full version.

Date: 2015‐11‐25 FCC ID: 2AEFTAW313T AUTHORIZATION LETTER To whom it may concern: We, the undersigned, hereby authorize Amanda Wu/ Senior Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Amanda Wu/ Senior Specialist of BV CPS Taoyuan on our behalf shall have the same effect as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ Name: Ken Yang Title: Technical Supervisor AVerMedia Technologies Inc. Address: NO.135, Jian 1st Rd., Zhonghe Dist, New Taipei City, Taiwan (R.O.C.) Tel: +886‐2‐2226‐3630 Fax: +886‐2‐2221‐1901 E‐mail: [email protected]

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3 Page 4

FCC Label Location Screw 5mm 2015/09/171 of 1 User Experience Design Center AverMedia Con!dential. This con!dential document is the property of AverMedia; therefore, shall not be copied or circulated without permission. Designer:David JuanDate:Sheet:Version:1.0Units: mm Scale: 1:1 Check: AW313- CMF CMF Front Cover Speaker Mesh Metal Hinge Clip Back Cover Control Button 5 . 5 7 37.81 2 . 4 4 37.88 4 . 8 5 5 6 . 0 5 18.03 Speaker Mesh Material: ABS Texture: 鏡面拋光 / 標籤區域拋光800 / 安規字體放電花 Color: Pantone Black C Material: ABS Texture: 高光注塑 Color: Pantone Black C

FCC ID: 2AEFTAW313T Report No.: RF150923D10 Operational Description This device is a Smart Microphone. The transmitter of the EUT is powered by Adapter or Battery (DC 5V). The antenna is PCB printed antenna without antenna connector. The antennas provided to the EUT, please refer to the following table. For more detailed instruction, please take a look at the user’s manual.

Report No.: SA150923D10 Page No. 1 / 5 Report Format Version: 6.1.1 RF Exposure Report Report No.: SA150923D10 FCC ID: 2AEFTAW313T Test Model: AW313T Received Date: Sep. 23, 2015 Test Date: Oct. 20 ~ 26, 2015 Issued Date: Nov. 6, 2015 Applicant: AVerMedia Technologies Inc. Address: NO.135, Jian 1st Rd., Zhonghe Dist, New Taipei City, Taiwan (R.O.C.) Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C.) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: SA150923D10 Page No. 2 / 5 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits For Maximum Permissible Exposure (MPE) ............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 3 Calculation Result Of Maximum Conducted Power .......................................................................... 5 Report No.: SA150923D10 Page No. 3 / 5 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued SA150923D10 Original release. Nov. 6, 2015 Report No.: SA150923D10 Page No. 4 / 5 Report Format Version: 6.1.1 1 Certificate of Conformity Product: Smart Microphone Brand: AVerMedia Test Model: AW313T Sample Status: Engineering sample Applicant: AVerMedia Technologies Inc. Test Date: Oct. 20 ~ 26, 2015 Standards: FCC Part 2 (Section 2.1093) KDB 447498 D03 KDB 447498 D01 IEEE C95.1 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date:Nov. 6, 2015 Annie Chang / Senior Specialist Approved by : , Date:Nov. 6, 2015 Rex Lai / Assistant Manager Report No.: SA150923D10 Page No. 5 / 5 Report Format Version: 6.1.1 2 RF Exposure 2.1 Limits For Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 300-1500......F/150030 1500-100,000......1.030 F = Frequency in MHz 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 3 Calculation Result Of Maximum Conducted Power Frequency Band (MHz) Max Power (dBm) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) 2406 ~ 2474 8.96 0.46 20 0.0017 1 -- - END ---

Report No.: RF150923D10 Page No. 1 / 45 Report Format Version: 6.1.1 FCC Test Report Report No.: RF150923D10 FCC ID: 2AEFTAW313T Test Model: AW313T Received Date: Sep. 23, 2015 Test Date: Sep. 25 ~ Oct. 30, 2015 Issued Date: Nov. 6, 2015 Applicant: AVerMedia Technologies Inc. Address: NO.135, Jian 1st Rd., Zhonghe Dist, New Taipei City, Taiwan (R.O.C.) Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C.) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF150923D10 Page No. 2 / 45 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 9 3.3 Description of Support Units .............................................................................................................. 11 3.3.1 Configuration of System under Test .................................................................................................. 12 3.4 General Description of Applied Standards ........................................................................................ 14 4 Test Types and Results ...................................................................................................................... 15 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 15 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 15 4.1.2 Test Instruments ................................................................................................................................ 16 4.1.3 Test Procedures ................................................................................................................................. 17 4.1.4 Deviation from Test Standard ............................................................................................................ 17 4.1.5 Test Set Up ........................................................................................................................................ 18 4.1.6 EUT Operating Conditions ................................................................................................................. 19 4.1.7 Test Results ....................................................................................................................................... 20 4.2 Conducted Emission Measurement .................................................................................................. 24 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 24 4.2.2 Test Instruments ................................................................................................................................ 24 4.2.3 Test Procedures ................................................................................................................................. 25 4.2.4 Deviation From Test Standard ........................................................................................................... 25 4.2.5 Test Setup .......................................................................................................................................... 25 4.2.6 EUT Opera…

Text truncated - open the document above for the full version.

1 of 4 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST (Mode A & C) 2 of 4 CONDUCTED EMISSION TEST (Mode B) 3 of 4 RADIATED EMISSION TEST (Below 1GHz) 4 of 4 Radiated Emission Test (Above 1GHz)