2AEGOPANTUM-2Monochrome Laser Printer

8VHU*XLGH ,WLVUHFRPPHQGHGWRFDUHIXOO\UHDGWKLV*XLGHEHIRUHXVLQJWKHSULQWHU 3DQWXP336HULHV 3DQWXP3 6 6HULHV 0RQRFKURPH/DVHU3ULQWHU I Preface Welcome to the Pantum series products! We heartily appreciate your using of Pantum series products! To protect your vital interests, please carefully read the following statements. Legal Notice Trademark Pantum and Pantum ྄മ are registered trademarks of Zhuhai Pantum Electronics Co.,Ltd. in the mainland of China. Microsoft ® , Windows ® , Windows Server ® and Windows Vista ® are trademarks registered by Microsoft Corporation in the United States or other countries/regions. Wi-Fi ® and Wi-Fi Protected Setup™ are registered trademarks of the Wi-Fi Alliance. The ownership to the names of the software in this User Guide belongs to their respective owned companies in accordance with corresponding license agreement, and they are referred for instructions only. All other product and brand names herein may be the registered trademarks, trademarks or service marks of their respective owners, and they are referred for instructions only. Copyright The copyright of this User Guide is owned by Zhuhai Pantum Electronics Co.,Ltd. It is prohibited to copy, translate, modify and transmit this User Guide by any means or forms without the prior written consent of Zhuhai Pantum Electronics Co.,Ltd. Version: V1.1 EN Disclaimer For a better user experience, Zhuhai Pantum Electronics Co.,Ltd. reserves the right to make changes to the User Guide. The information contained herein is subject to change without notice. Users are responsible for any damages arising from failing to follow this User Guide. Meanwhile, except the express warranty made in the product maintenance manual or service commitment, Zhuhai Pantum Electronics Co.,Ltd. does not make any express or implied warranty or guarantee to this User Guide (including composing or words). Using this product to copy, print, scan certain documents or images or make other forms of operations may be prohibited by the local laws. If you are uncertain about the legality of using this product for certain documents or images, you should consult your legal advisor in advance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recautions Precautions before Using the Printer: 1. Read and understand all instructions; 2. Familiarize yourself with the basic principles associated with operating electrical appliances; 3. Comply with all warnings and instructions marked on the equipment or speci¿ed in the manual supplied with the equipment; 4. If the operating instructions conÀict with the safety information, please refer back to the safety information, as you may have misu nderstood the operating instructions. If you cannot resolve the conÀicts, please call the Customer Service Hotline or contact a service representative for help; 5. Before cleaning the equipment, remove the power cord from the AC power supply outlet. Do not use liquid or aerosol cleaners; 6. Please make sure that the equipment is put on a stable desktop surface to avoid serious damage caused by the f alling of the equipment; 7. Do not put the equipment near a radiator, an air conditioner, or a ventilation pipe; 8. Do not place any articles on top of the power cord. Do not put the equipment in a place where its power cord will be stepped on by people; 9. Outlets and extension cords must not be overloaded. This may reduce performance and could result in ¿re or electric shock; 10. Do not allow pets t o chew on the AC power cord or the computer interface cable; 11. Do not allow sharp objects piercing equipment slot, so as to avoid contact with the high- voltage device, which otherwise may result in ¿re or electric shock. Take care not to spill liquids onto the equipment; 12. Do not disassemble the equipment so as to avoid the risk of electric shock. Necessary repairs may only be carried out by pr ofessional maintenance personnel. Opening or removing the cover could result in an electric shock or other potential hazards. Incorrect disassembly and assembly could also result in an electric shock during future use; 13. If any one of the following occurs, disconnect the equipment from the computer and pull out the power cord from the AC wall socket and contact a quali¿ed member of the service personnel for maintenance: ‡ Liquid has been spilled into the equipment. ‡ The equipment has been exposed to rain or water. ‡ The equipment falls, or the cover is damaged. ‡ Signi¿cant changes in the equipmentȏs performance. 14. Only adjust the control mentioned in the instructions. Incorrect adjustment of other controls may result in damage and mean that professional maintenance personnel need to spen d more time ¿xing it; 15. Do not use the equipment in a thunderstorm so as to avoid the risk of an electric shock. If possible, pull out the AC power cord during a thunderstorm; 16. If you continuously print multiple pages, the surface of the tray will become very hot. Take care not…

Text truncated - open the document above for the full version.

Pantum Mobile Print is a free application, which allows users to directly print photos, documents and WebPages from the mobile terminal. It is available to mobile operating systems with Android 2.3 or later and supports a resolution of 240 * 320dpi or higher. It connects your mobile device with the printer through Wi-Fi access points. Yo u just need to install the Pantum Mobile Print application for configuring the network settings, then it will automatically detect compatible printers to print, which is very convenient and efficient. 6-2 6. Pantum Mobile Print 6.1. What's Pantum Mobile Print 6.2. Download Pantum Mobile Print To download the Pantum Mobile Print application, please visit Pantum offcial website www.pantum.com. 6.3. Supported Mobile Operating System Android OS 2.3 or later. 6.4. How to use mobile devices for the mobile printing 6.4.1. Mobile Printing via Printer Hotspot 6.4.1.1. For Android Devices 1. Switch on the printer. 2. Turn on the Wi-Fi on your mobile device and connect to the Pantum printer Wi-Fi hotspot (for example, it should read Pantum-AP-XXXXXX). Note: If several PANTUM WIFI printers are avaiable at the same time, when choosing printer hotspots, long press the “Cancel/Continue” button of the printer to print the information page, check the “SSID” hot name in the last page “WIFI Configuration Information Page”, and connect the coresponding hot signal with cell phone. Pantum mobile printing for Andriod system, the current product supports only for printing txt documents, images or web pages, but not for printing documents in PDF, Word, Excel, PPT, etc. 6-3 3. Now you are ready to print, open the App and go to the home page. 4. Choose from any of the menu options to print. Select the file, click ȐPrint Previewȑ. 5. Select the Printer, number of copies and the paper size and click ȐPrintȑ and you are done. Note: ‡ Mobile printing App installation (you have several options: QR code, Google Play Store, Pantum website). ‡ Scan the QR code on the printer or browse www.pantum.com or download the Mobile Printing App directly from Google Play Store and install it to the mobile device. 6-4 6.4.1.2. For Apple IOS Devices (iPad, iPhone, etc.) 1. Switch on the printer. 2. Turn on the Wi-Fi on your mobile device and connect to the Pantum printer Wi-Fi hotspot (for example, it should read Pantum-AP-XXXXXX). If several PANTUM WIFI printers are avaiable at the same time, when choosing printer hotspots, long press the “Cancel/Continue” button of the printer to print the information page, check the “SSID” hot name in the last page “WIFI Configuration Information Page”, and connect the coresponding hot signal with cell phone. 3. Select a file you want to print. 6-5 4. Click the “ ” button, and select “Print” on the lower right corner 5. Select printer and number of copies, and click ȐPrintȑ for printing and you are done. Note: ‡ If printing fails, please check if the mobile device has been connected to printer Wi-Fi hotspot, and the printer has been connected to the power; ‡ If indication shows that no printer has been detected, please check if the printer has been connected to the power and the machine has been turned on. 6-6 6.4.2. Mobile Printing via Wi-Fi Access Points (for All Mobile Devices) 1. Driver installation. Insert the CD or download the driver from www.pantum.com and click ȐAutorunȑ. 2. In the installation home page, choose Language, Printer Series and Installation Mode, select ȐPrinters connected to a new networkȑ and click ȐInstallȑ. 3. Configuring the printer to the Wi-Fi Access Point; Select the Wi-Fi ac cess point that you want to link your printer and click ȐNextȑ. 6-7 4.Enter your Wi-Fi password and click ȐNextȑ. 5. Wait until the printer is connected to the wireless network, and click ȐDoneȑ. 6-8 6. The driver will search for available printer automatically. 7. Select the P2500W printer and click ȐNextȑ. 8. Wait until the installation is completed. 6-9 9. You are ready to use your Pantum printer to print from your laptop mobile devices, just ensure that your device is connected to the configured Wi-Fi access point or the printer Wi-Fi hotspot which reads like Pantum-AP-XXXXXX. Note˖ ‡ If indication shows that no printer has been detected, please check if the printer has been connected to the power and the laptop with the cable provided in the box when connecting the printer to Wi-Fi network.   &KDSWHU 3ULQW 3ULQW.................................................................................................................................................. 3ULQW)XQFWLRQ............................................................................................................................. 2SHQLQJ+HOS'RFXPHQW........................................................................................................... 0DQXDO'XSOH[........................................................................................................................... &DQFHO3ULQW-RE........................................................................................................................  3ULQW 3ULQW)XQFWLRQ 7KHSULQWIXQFWLRQFDQEHDFKLHYHGWKURXJKWKHVHWWLQJVRIYDULRXVSURSHUWLHVLQWKH3ULQWLQJ 3UHIHUHQFHVDQGVRPHRIWKHIXQFWLRQVDUHDVIROORZV )XQFWLRQV'LDJUDP 0DQXDO'XSOH[ 121 &ROODWH 321321 5HYHUVH3ULQW 1 1 2 2 3 3 1LQ 12 2 1 3RVWHU3ULQW IRU:LQGRZV V\VWHPRQO\ A =RRP3ULQW 1 &XVWRP6L]H 1 7-3 Note:‡<RXFDQVHOHFWWKH[3RVWHU3ULQWLQ1LQWRHQDEOHWKHSRVWHUSULQWLQJIXQFWLRQ ‡<RXFDQRSHQWKH3ULQWLQJ3UHIHUHQFHVDQGFOLFN+HOSEXWWRQWRYLHZWKHVSHFLILF IXQFWLRQH[SODQDWLRQ)RULQIRUPDWLRQDERXWKRZWRRSHQWKHKHOSGRFXPHQWVHH 6HFWLRQ 7.2. Opening Help Document <RXFDQRSHQWKH3ULQWLQJ3UHIHUHQFHVDQGFOLFN+HOSEXWWRQ IRU:LQGRZVV\VWHPRQO\ 7KH KHOSGRFXPHQWFRQWDLQVWKHXVHUJXLGHZKHUH\RXFDQ¿QGWKHLQIRUPDWLRQRQSULQWVHWWLQJV  0DQXDO…

Text truncated - open the document above for the full version.

Zhuhai Pantum Electronics Co., Ltd 022311 – 6 Authority to Act as Agent Date: 2015-04-14 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: __SGS-CSTC Standards Technical Services Co., Ltd.__ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: _____(Typically 8 – 12 months)_____ By: __________________________ __Emma Li____ (Signature 1 ) (Print name) Title: _ Certification Engineer ___ On behalf of: _ Zhuhai Pantum Electronics Co., Ltd. (Company Name) Telephone: _ 86-18666978959 ____ 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

Zhuhai Pantum Electronics Co., Ltd 022311 – 6 Request for Confidentiality Date: 2015-04-14 Subject: Confidentiality Request for: FCC ID ____2AEGOPANTUM-2__ IC ID:__20077-PANTUM2___ _ Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent* 2 Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent* User’s Manual *Note: ______(Insert Explanation as Necessary)______ __ Zhuhai Pantum Electronics Co., Ltd_ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180) 3 ___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By: __________________________ ___Emma Li/ Certification Engineer ___ (Signature/Title 4 ) (Print name) 2 - The asterisked items (*) require further justification before permanent confidentiality will be allowed. These also currently require review by the FCC under their Permit-But-Ask policy before the grant is issued and can delay completion of an application. Further justification should be added to the note above. One such example for a potted device would be: “The EUT is FULLY potted using a non-removable epoxy based material. Removal of potting material causes irreparable damage to internal circuitry. See photographs exhibits that outline the device before and after potting.” 3 - Please refer to http://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 4 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

Declaration Details of EUT Applicant: Product Name: Model No.: Operating Frequency Zhuhai Pantum Electronics Co., Ltd Monochrome Laser Printer P2500W, P2506W, P2502W 2412 MHz to 2462 MHz for 802.11b/g/n(HT20) 2422 MHz to 2452 MHz for 802.11n(HT40) Type of Modulation: 802.11b: DSSS(CCK/QPSK/BPSK) 802.11g: OFDM(BPSK/QPSK/16QAM/64QAM) 802.11n: MIMO OFDM (BPSK/QPSK/16QAM/64QAM) Transmit Data Rate: 802.11b :1/2/5.5/11 Mbps 802.11g :6/9/12/18/24/36/48/54 Mbps 802.11n(HT20): 7.2/14.4/21.7/28.9/43.3/57.8/65/72.2 Mbps 802.11n(HT40): 15/30/45/60/90/120/135/150 Mbps Number of Channels 11 Channels for 802.11b/g/n(HT20) 7 Channels for 802.11n(HT40) Channel Separation: 5 MHz This device is only using channel 1-11 in US and cannot be configured by the user in use of channels and region. Signature: Date : 2015.4.18 Title: __ Certification Engineer _______ Email: _______ [email protected] ________ On behalf of: __Zhuhai Pantum Electronics Co., Ltd.___ (Company Name) Telephone: ___86-18666978959 ___

External Photo

Internal Photo

Type 1 flat cable connector Type 2 flat cable connector

Internal Photo UND ER WIFI BO AR D L AN&USB OTHE R SI DE OF WIFI B O AR D

SGS-CSTC Standards Technical Services Co., Ltd. Application No..: GZEM1504001426CR Page: 1 of 3 FCC ID: 2AEGOPANTUM-2 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. RF Exposure Compliance Requirement 1. Standard requirement Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2m normally can be maintained between the user and the device. (a) Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S)(mW/cm 2 ) Averaging Times ׀E׀ 2 ׀ ,H׀ 2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842/f 4.89/f (900/f)* 6 30-300 61.4 0.163 1.0 6 300-1500 -- -- F/300 6 1500-100000 -- -- 5 6 (b) Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S)(mW/cm 2 ) Averaging Times ׀E׀ 2 ׀ ,H׀ 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 -- -- F/1500 30 1500-100000 -- -- 1.0 30 Note: f=frequency in MHz; *Plane-wave equivalent power density SGS-CSTC Standards Technical Services Co., Ltd. Application No..: GZEM1504001426CR Page: 2 of 3 FCC ID: 2AEGOPANTUM-2 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 2. MPE Calculation Method E (V/m)=(30*P*G) 0.5 /d Power Density: Pd(W/m 2 )=E 2 /377 E=Electric Field (V/m) P=Peak RF output Power (W) G=EUT Antenna numeric gain (numeric) d= Separation distance between radiator and human body (m) The formula can be changed to Pd= (30*P*G)/(377*d 2 ) From the peak EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained. 3. Calculated Result and Limit (1)802.11b 11Mbps data rate: Frequency (MHz) Antenna Gain (Numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 2412 1.5849 16.27 42.36 0.0134 1 Complies 2437 1.5849 16.40 43.65 0.0134 1 Complies 2462 1.5849 16.91 49.09 0.0155 1 Complies (2) 802.11g 54Mbps data rate: Frequency (MHz) Antenna Gain (Numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 2412 1.5849 18.42 69.50 0.0219 1 Complies 2437 1.5849 18.97 78.89 0.0249 1 Complies 2462 1.5849 19.03 79.98 0.0252 1 Complies SGS-CSTC Standards Technical Services Co., Ltd. Application No..: GZEM1504001426CR Page: 3 of 3 FCC ID: 2AEGOPANTUM-2 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technological Development District, Guangzhou, China 510663 Telephone: +86 (0) 20 82155555 Fax: +86 (0) 20 82075059 Email: [email protected] Report No.: GZEM150400142601 Page: 1 of 121 FCC ID: 2AEGOPANTUM-2 Authorized Signature: Jerry Chan Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspxand,for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. 1 Cover Page TEST REPORT Application No.: GZEM1504001426CR Applicant: Zhuhai Pantum Electronics Co., Ltd FCC ID: 2AEGOPANTUM-2 Product Name: Monochrome Laser Printer Product Description: 802.11b/g/n Wireless Monochrome Laser Printer with 2.4 GHz as carrier. Model No.: P2500W, P2506W, P2502W ♣ ♣ Please refer to section 3 of this report for further details. Trade mark: PANTUM Standards: 47 CFR PART 15 Subpart C: 2012 section 15.247 Date of Receipt: 2015-04-02 Date of Test: 2015-04-03 to 2014-04-08 Date of Issue: 2015-04-17 Test Result : Pass* * In the configuration tested, the EUT detailed in this report complied with the standards specified above. Please refer to section 3 of this report for further detail. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM150400142601 Page: 2 of 121 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspxand,for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. 2 Version Revision Record Version Chapter Date Modifier Remark 00 2015-04-17 Original Authorized for issue by: Tested By 2015-04-03 to 2014-04-08 (Jack Liang) / Project Engineer Date Prepared By 2015-04-09 (June Chen)/ Clerk Date Checked By 2015-04-09 (Jerry Chan)/Reviewer Date SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM150400142601 Page: 3 of 121 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspxand,for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. 3 Test Summary Test Test Requirement Test method Result Antenna Requirement FCC PART…

Text truncated - open the document above for the full version.

Test Setup Photos 1.1 RADI ATE D SP URI OU S EM ISSIO N TE ST SETUP Below 1GHz: Above 1GHz: 1.2 CON DU CTED EM ISSI ON TEST SETUP