2AEZY-BSTN-01BOOMBOT PRO & BASS STATION

Boombotix warrants to the original retail purchaser of this Boombotix portable speaker that should this product or any part thereof during normal consumer usage and conditions, be proven defective in material or workmanship that results in product failure within the first twelve (12) month period from the date of purchase, such defect(s) will be repaired or replaced (with new or rebuilt parts) at the Company’s option, without charge for parts or labor directly related to the defect(s). The antenna, keypad, display, rechargeable battery and battery charger, if included, are similarly warranted for twelve (12) months from date of purchase. This Warranty is not transferable or assignable. This Warranty does not apply to: (a) Product subjected to abnormal use or conditions, accident, mishandling, neglect, unauthorized alteration, misuse, improper installation or repair or improper storage; (b) Product whose mechanical serial number or electronic serial number has been removed, altered or defaced; (c) Damage from excessive exposure to moisture, humidity, excessive temperatures or extreme environmental conditions; (d) Damage resulting from connection to, or use of any accessory or other product not approved or authorized by the Company; (e) Defects in appearance, cosmetic, decorative or structural items such as framing and nonoperative parts; (f) Product damaged from external causes such as fire, flooding, dirt, sand, weather conditions, blown fuse, theft or improper usage of any electrical source; (g) Product taken apart without written permission by Boombotix. This includes and is not limited to removing the metal clip or removing the screws holding the casing together. FIRE + ELECTRIC SHOCK HAZARD • Do not drop, disassemble, open, crush, bend, deform, puncture, shred, microwave, incinerate, paint, or insert foreign objects in to the Boombot speaker. Such actions could result in electric shock. • Clean the Boombot speaker only with a dry cloth. • Do not expose your Boombot speaker to extremely high or low temperatures. • Do not leave your Boombot speaker in direct sunlight for extended periods of time, maximum operating temperature is 70°C. • Do not leave your Boombot speaker near open flames such as cooking burners, candles, or fireplaces. • Do not block any ventilation openings. BATTERY + CHARGER HAZARD • Do not dispose of your Boombot speaker in a fire. The battery could explode causing injury or death. • Only charge the battery in accordance with the user instructions supplied with the Boombot speaker. • Do not attempt to disassemble the Boombot speaker charger or force open the built-in battery because this may result in electric shock. • Do not charge the Boombot speaker in damp areas or in extremely high or low temperatures because this could result in electric shock. • Do not clean the Boombot speaker when it is being charged. Always unplug the charger first before cleaning the Boombot speaker. WARRANTY INFO This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION! Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC STATEMENT TO ACTIVATE YOUR ONE YEAR WARRANTY AND DOWNLOAD USER MANUAL, VISIT US AT: BOOMBOTIX.COM/SIGNUP • Use only included AC wall charger to power BASS Station. • To power on, connect AC adapter and plug into outlet: Solid blue light. • To activate BASS Station audio, place Boombot PRO+ onto BASS Station unit, which will charge device and power subwoofer acoustics. BLUETOOTH • Boombot Bluetooth ID: Boombot PRO+ • Boombot is discoverable: Blinking blue light. • Boombot is paired: Solid blue light. • Reset Bluetooth connection: Hold [+] and [-] for 2 seconds. PLAYBACK BATTERY • For a full charge, plug Boombot PRO+ into a wall charger or computer with the micro USB cable, or place it on the BASS Station. • Full charge will take 1-2 hours, indicated by a pulsing orange light. • Boombot is fully charged when indicated by a solid orange light. • Boombot battery is low when indicated by a flashing red light. FLASH MEMORY • Use only included micro USB cable for data transfer. • To modify music on Boombot PRO+ flash drive: 1. Connect Boombot PRO+ to computer with micro USB cable. 2. Power on Boombot PRO+. 3. Double tap power button. 4. Boombot PRO+ will mount as a drive, indicated by a solid white light. 5. Once file transfer is complete, eject Boombot PRO+ flash drive. • Filetypes accepted: M4A, MP3, WAV, FLAC, OGG, WMA. • Empty trash after removing files from Boombot PRO+ flash drive. • Device will accept up…

Text truncated - open the document above for the full version.

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 4.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (obsolete) 2.0 3.0 Jan-31-2012 Added IC confidentiality letter form (current) 3.0 4.0 March-26-2015 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 4.0 BOOMBOTIX, INC (2015-11-12) To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: 2AEZY-BSTN-01 We hereby request confidential treatment of information accompanying this application as outlined below: - Block Diagram - Schematics - Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Mr Chris Mckleroy VP Product & Experience BOOMBOTIX, INC 1501 MARIPOSA ST. SUITE 412, SAN FRANCISCO, CA94107, USA

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 5.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (obsolete) 3.0 4.0 May-23-2014 Added FCC ID field (current) 4.0 5.0 Sept 16 2014 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 5.0 BOOMBOTIX, INC (2015-11-12) To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, BOOMBOTIX, INC hereby authorize SIEMIC, Inc. to act as a Certification Body for certifying for the following project(s): Product: BOOMBOT PRO & BASS STATION M/N: BSTN-01 FCC ID: 2AEZY-BSTN-01 Sincerely, Mr Chris Mckleroy VP Product & Experience BOOMBOTIX, INC. 1501 MARIPOSA ST. SUITE 412, SAN FRANCISCO, CA94107, USA

FCC ID：2AEZY-BSTN-01

Label Location on EUT

Antenna

RF EXPOSURE EVALUATION EUT Specification EUT BOOMBOT PRO & BASS STATION Model Number BSTN-01 FCC ID 2AEZY-BSTN-01 Antenna gain (Max) 0dBi Kind of Device Bluetooth 3.0+EDR Operation Frequency 2402-2480MHz Modulation GFSK, π/4-DQPSK, 8DPSK Input Rating DC 12V, 1500mA from adapter or DC 3.7V, 1000mA lithium battery Max. output power -0.99dBm(0.000796W) Classification Per Stipulated Test Standard §15.247(i), §2.1093 Test Requirement: According to §15.247(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Routine SAR evaluation refers to that specifically required by §2.1093, using measurements or computer simulation. When routine SAR evaluation is not required, portable transmitters with output power greater than the applicable low threshold require SAR evaluation to quality for TCB approval. One antenna is available for the EUT(BT product). The minimum separation distance is 5mm. Channel Frequency (MHz) Measurement Peak Output Power(dBm) GFSK π/4-DQPSK 8DPSK 2402 -2.02 -1.52 -1.31 2441 -0.99 -2.32 -2.17 2480 -1.64 -2.98 -2.67 Modulation Channel Frequenc y (MHz) Tune up tolerance( dBm) Max tune up conducted power(dBm) Output Peak power (mW) Calculation Result Limits GFSK 2402 -2±1 -1 0.79 0.2462 3 2441 -1±1 0 1.00 0.3125 3 2480 -2±1 -1 0.79 0.2502 3 π/4-DQPSK 2402 -2±1 -1 0.79 0.2462 3 2441 -2±1 -1 0.79 0.2482 3 2480 -3±1 -2 0.63 0.1987 3 8DPSK 2402 -1±1 0 1.00 0.3100 3 2441 -2±1 -1 0.79 0.2482 3 2480 -3±1 -2 0.63 0.1987 3 According to KDB 447498, no stand-alone required for BT antenna, and no simultaneous SAR measurement is required. Signature Date: 2015-10-12

TRF No. FCC Part 15.247/A Page 1 of 68 Report No. ED150910009EVer.1.0 ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART C REQUIREMENT OF BOOMBOT PRO & BASS STATION Model No.: BSTN-01 Trademark: BOOMBOOTIX FCC ID: 2AEZY-BSTN-01 Report No.: ED150910009E Issue Date: November 13, 2015 Prepared for BOOMBOTIX, INC 1501 MARIPOSA ST. SUITE 412, SAN FRANCISCO, CA94107, USA Prepared by EMTEK(Dongguan) Co., Ltd. No.281, Guantai Road, Nancheng District, Dongguan, Guangdong, China TEL: 86-769-22807078 FAX: 86-769-22807079 This report shall not be reproduced, except in full, without the written approval of EMTEK(Dongguan) Co., Ltd. TRF No. FCC Part 15.247/A Page 2 of 68 Report No. ED150910009EVer.1.0 VERIFICATION OF COMPLIANCE Applicant: BOOMBOTIX, INC 1501 MARIPOSA ST. SUITE 412, SAN FRANCISCO, CA94107, USA Manufacturer: DEREK(SHAOGUAN)LIMITED Gaojiling, Taiping Town, Shixing County, Shaoguan, Guangdong, China Product Description: BOOMBOT PRO & BASS STATION Trade Mark: BOOMBOOTIX Model Number: BSTN-01 We hereby certify that: The above equipment was tested by EMTEK(Dongguan) Co., Ltd. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10-2013 and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.247(2015). Date of Test : September 10, 2015 to October 08, 2015 Prepared by : Mary Jiang/Editor Reviewer : Alan He/Supervisor Approved & Authorized Signer : Sam Lv/Manager TRF No. FCC Part 15.247/A Page 3 of 68 Report No. ED150910009EVer.1.0 Modified Information Version Summary Revision Date Report No. Ver.1.0 Original Report / ED150910009E TRF No. FCC Part 15.247/A Page 4 of 68 Report No. ED150910009EVer.1.0 Table of Contents 1. GENERAL INFORMATION ................................................................................................ 6 1.1 PRODUCT DESCRIPTION ................................................................................................................... 6 1.2 TEST FACILITY ................................................................................................................................. 7 2. SYSTEM TEST CONFIGURATION .................................................................................... 8 2.1 EUT CONFIGURATION ...................................................................................................................... 8 2.2 EUT EXERCISE ................................................................................................................................ 8 2.3 TEST PROCEDURE ........................................................................................................................... 8 2.4 CONFIGURATION OF TESTED SYSTEM .............................................................................................. 9 3. SUMMARY OF TEST RESULTS ..................................................................................... 10 4. DESCRIPTION OF TEST MODES ................................................................................... 11 5. TEST SYSTEM UNCERTAINTY ...................................................................................... 12 6. CONDUCTED EMISSIONS TEST .................................................................................... 13 6.1 MEASUREMENT PROCEDURE: ........................................................................................................ 13 6.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ................................................................... 13 6.3 MEASUREMENT EQUIPMENT USED: ................................................................................................ 13 6.4 MEASUREMENT RESULT: ................................................................................................................ 13 6.5 CONDUCTED MEASUREMENT PHOTOS: .......................................................................................... 18 7. RADIATED EMISSION TEST ........................................................................................... 19 7.1 MEASUREMENT PROCEDURE ......................................................................................................... 19 7.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ................................................................... 20 7.3 MEASUREMENT EQUIPMENT USED: ................................................................................................ 21 7.4 RADIATED EMISSION LIMIT ............................................................................................................. 22 7.5 MEASUREMENT RESULT ................................................................................................................. 23 7.6 RADIATED MEASUREMENT PHOTOS: .............................................................................................. 33 8. CHANNEL SEPARATION TEST ...................................................................................... 34 8.1 MEASUREMENT PROCEDURE ......................................................................................................... 34 8.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ................................................................... 34 8.3 MEASUREMENT EQUIPMENT USED: ................................................................................................ 34 8.4 MEASUREMENT RESULTS: .............................................................................................................. 34 9. 20DB BANDWIDTH TEST ............................................................................................... 41 9.1 MEASUREMENT PROCEDURE ......................................................................................................... 41 9.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ..............…

Text truncated - open the document above for the full version.