2AF3K-SPS5Customer display

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Covered Equipment Certification Attestation Letter ATTN.: Reviewing Engineer FCC ID: 2AF3K-SPS5 Block, Inc. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. Block, Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Block, Inc. (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Gavin Demonte Hardware Regulatory & Compliance Lead Block, Inc. Date and Place of Issue: 12/09/2025, Toronto, Canada block.xyz.com | |

Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) Agent Designation Attestation FCC ID: 2AF3K-SPS5 Grantee FRN: 0024921181 To whom it may concern: Block, Inc. (“the applicant”) as required by section §2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC ID. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility under CFR 47 §2.929(c) to inform the FCC whenever the agent information changes. Contact Person Gavin Demonte Company Name Block, Inc. FCC FRN 0024921181 Company US Address 1955 Broadway, Suite 600 Oakland CA 94612 United States Email [email protected] Gavin Demonte Hardware Regulatory & Compliance Lead Block, Inc. Date and Place of Issue: 12/09/2025, Toronto, Canada block.xyz.com | |

Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Compliance Testing, LLC to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). Gavin Demonte Hardware Regulatory & Compliance Lead Block, Inc. Date and Place of Issue: 12/10/2025, Toronto, Canada block.xyz.com | |

Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint UL Verification Services (Guangzhou) Co., Ltd., Song Shan Lake Branch (Room 101, Building 2, No.4, Information Road, Songshan Lake, Dongguan, Guangdong, China ) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with Block, Inc. (1955 Broadway, Suite. 600, Oakland, CA 94612, US) Gavin Demonte Hardware Regulatory & Compliance Lead Block, Inc. Date and Place of Issue: 12/10/2025, Toronto, Canada block.xyz.com ||

Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AF3K-SPS5 Product Name: Customer display Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission rules, and in accordance with the FCC Public notice dated June 15, 2004 (DA 04-1705), we hereby request short-term confidentiality for the following items prior to marketing the device.: ●Test Setup Photos ●External Photos ●Internal Photos ●User Manual The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we hereby request that the following documents be held confidential: ● Schematics ● Block diagram ● Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Gavin Demonte Hardware Regulatory & Compliance Lead Block, Inc. Date and Place of Issue: 12/09/2025, Toronto, Canada block.xyz.com ||

Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AF3K-SPS5 Product Name: Customer display Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission rules, and in accordance with the FCC Public notice dated June 15, 2004 (DA 04-1705), we hereby request short-term confidentiality for the following items prior to marketing the device.: ●Test Setup Photos ●External Photos ●Internal Photos ●User Manual The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we hereby request that the following documents be held confidential: ● Schematics ● Block diagram ● Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Gavin Demonte Hardware Regulatory & Compliance Lead Block, Inc. Date and Place of Issue: 12/09/2025, Toronto, Canada block.xyz.com ||

D C B A A B C D 1 2 3 4 5 6 7 8 8 7 6 5 4 3 2 1 REVISIONS REV.DESCRIPTIONDATEAPPROVED SQUARE PART NO.: TITLE: PROJECT: THIS DOCUMENT CONTAINS INFORMATION THAT IS PROPRIETARY AND CONFIDENTIAL TO SQUARE AND/OR ITS CLIENT COMPANIES. NO FURTHER REPRODUCTION, DISSEMINATION OR USE IS ALLOWED WITHOUT WRITTEN PERMISSION FROM SQUARE OR ITS APPLICABLE CLIENT(S). DIMENSIONS ARE IN MILLIMETERS TOLERANCES: X.X 0.2 X.XX 0.10 X.XXX 0.050 ANGLES 0.5 MATERIAL: FINISH: SEE NOTES DRAWN BY: CHECKED BY: APPROVED BY: DATE NAME CAD MODEL: SIZE SCALE: 1:2 INTERPRET GEOMETRIC TOLERANCING PER: ASME Y14.5M-1994 SEE NOTES REVISION: Artwork, Bran, (N/L) D-ART-02683 SHEET 1 OF 1 1Initial Release to Proto05/22/2025 Ben Update for EVT08/06/2025 Francois 2 NOTES: (UNLESS OTHERWISE SPECIFIED) INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5M 2018 STANDARD. IT IS EXPECTED THAT THE SUPPLIER UNDERSTAND AND COMPLY WITH ALL TOLERANCES AS DESCRIBED IN THIS STANDARD AND APPLIED TO THIS DRAWING PART MUST COMPLY WITH REGULATED SUBSTANCE REQUIREMENTS DEFINED IN EUROPEAN RoHS 2.0 DIRECTIVE, 2011/65/EU SURFACE TO MEET COSMETIC REQUIREMENTS AS SHOWN, SEE SQUARE DOCUMENT D-SPC-1312-01 FOR INSPECTION DETAILS Updated artwork 09/12/2025 Francois 3 Update for MP 10/21/2025 Francois 4 27mm 9.3mm Artwork on this face Cash Sans Regular vector graph vector graph 19.5mm 25.5mm Artwork centered Artwork centered SPS5-01. SN:1234567890123456 Block, Inc. Input:12V 1.4A. FCC ID: 2AF3K-SPS5. IC: 21827-SPS5. Assembled in China. SPS5-01. SN:1234567890123456 Block, Inc. Input:12V 1.4A. FCC ID: 2AF3K-SPS5. IC: 21827-SPS5. Assembled in China. SPS5-01. SN:1234567890123456

The results reported herein have been performed in accordance with the laboratory’s terms of accreditation. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report apply to the test sample(s) mentioned above at the time of the testing period only and are not to be used to indicate applicability to other similar products. FCC RF EXPOSURE REPORT CERTIFICATION TEST REPORT For Customer Display MODEL NUMBER: SPS5-01 FCC ID: 2AF3K-SPS5 REPORT NUMBER: 4791923606.2-1-RF-2 ISSUE DATE: December 12, 2025 Prepared for Block, Inc. 1955 Broadway, Suite. 600, Oakland, CA 94612, US Prepared by UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch Room 101, Building 2, No.4, Information Road, Songshan Lake, Dongguan, Guangdong, China Tel: +86 769 22038881 Fax: +86 769 33244054 Website: www.ul.com REPORT NO.: 4791923606.2-1-RF-2 Page 2 of 7 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0112 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Revision History Rev. Issue Date Revisions Revised By V0 December 12, 2025 Initial Issue REPORT NO.: 4791923606.2-1-RF-2 Page 3 of 7 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0112 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................. 4 2. TEST METHODOLOGY ..................................................................................................... 5 3. FACILITIES AND ACCREDITATION ................................................................................. 5 4. REQUIREMENT ................................................................................................................. 6 REPORT NO.: 4791923606.2-1-RF-2 Page 4 of 7 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0112 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. 1. ATTESTATION OF TEST RESULTS Applicant Information Company Name: Block, Inc. Address: 1955 Broadway, Suite. 600, Oakland, CA 94612, US Manufacturer Information Company Name: Block, Inc. Address: 1955 Broadway, Suite. 600, Oakland, CA 94612, US EUT Information EUT Name: Customer Display Model: SPS5-01 Brand: Square Sample Received Date: September 17, 2025 Sample Status: Normal Sample ID: 8925678 Date of Tested: November 4, 2025 to December 12, 2025 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC 47CFR§2.1091 PASS KDB447498D01v06 PASS Prepared By: Checked By: Fanny Huang Kebo Zhang Project Engineer Senior Project Engineer Approved By: Stephen Guo Laboratory Manager REPORT NO.: 4791923606.2-1-RF-2 Page 5 of 7 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0112 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. 2. TEST METHODOLOGY The tests documented in this report were performed in accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 and KDB447498D01v06. 3. FACILITIES AND ACCREDITATION Accreditation Certificate A2LA (Certificate No.: 4102.01) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch. has been assessed and proved to be in compliance with A2LA. FCC (FCC Designation No.: CN1187) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch. Has been recognized to perform compliance testing on equipment subject to the Commission's Declaration of Conformity (DoC) and Certification rules. ISED (Company No.: 21320) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch. has been registered and fully described in a report filed with ISED. The Company Number is 21320 and the test lab Conformity Assessment Body Identifier (CABID) is CN0046. VCCI (Registration No.: C-20202, G-20240, R-20248 and T-20202) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch. has been assessed and proved to be in compliance with VCCI, the Membership No. is 3793. Facility Name: Chamber E, the VCCI registration No. is G-20240 and R-20248 Shielding Room F, the VCCI registration No. is C-20202 and T-20202 Note: All tests measurement facilities use to collect the measurement data are located at Room 101, Building 2, No.4, Information Road, Songshan Lake, Dongguan, Guangdong, China. REPORT NO.: 4791923606.2-1-RF-2 Page 6 of 7 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0112 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. 4. REQUIREMENT LIMIT AND CALCULATION METHOD Systems operating under the provisions of FCC 47 CFR section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as mobile device whereby a distance of 0.2m normally can be maintained between the user and the device, and below RF Permissible Exposure limit shall comply with. Limits for General Population/Uncontrolled Exposure RF EXPOSURE LIMIT Frequency Range (MHz) E-field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm 2 ) Averaging Time |E| 2 , |H| 2 or S (Minutes) 0.3 -- 1.34 614 1.63 (100)* 30 1.34 -- 30 824/f 2.19/f (180/f 2 )* 30 30 -- 300 27.5 0.073 0.2 30 300 -- 1500 -- -- f/1500 30 1500 -- 100,000 -- -- 1.0 30 CALCULATION METHOD S=PG/4πR² Where: S=power density P=power input to antenna G=power gai…

Text truncated - open the document above for the full version.

The results reported herein have been performed in accordance with the laboratory’s terms of accreditation. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report apply to the test sample(s) mentioned above at the time of the testing period only and are not to be used to indicate applicability to other similar products. This report does not imply that the product(s) has met the criteria for certification. FCC 47 CFR PART 15 SUBPART C ISED RSS-210 ISSUE 11 CERTIFICATION TEST REPORT For Customer Display FCC MODEL NUMBER: SPS5-01 ISED MODEL NUMBER: SPS5-01-A REPORT NUMBER: 4791923606.2-1-RF-1 ISSUE DATE: December 12, 2025 FCC ID: 2AF3K-SPS5 IC: 21827-SPS5 Prepared for Block, Inc. FCC: 1955 Broadway, Suite. 600, Oakland, CA 94612, US ISED: 5000 Yonge Street, Toronto, ON, M2N7E9 Canada Prepared by UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch Room 101, Building 2, No.4, Information Road, Songshan Lake, Dongguan, Guangdong, China Tel: +86 769 22038881 Fax: +86 769 33244054 Website: www.ul.com REPORT NO.: 4791923606.2-1-RF-1 Page 2 of 36 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0059 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. . Revision History Rev. Issue Date Revisions Revised By V0 December 12, 2025 Initial Issue REPORT NO.: 4791923606.2-1-RF-1 Page 3 of 36 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0059 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. . Summary of Test Results Clause Test Items FCC Rules Test Results 1 Transmitter 99% Emission Bandwidth / 20dB Bandwidth RSS-Gen 6.7/ Part 15.215 (c) PASS 2 Transmitter Frequency Stability (Temperature & Voltage Variation) CFR 47 FCC §15.225(e) ISED RSS-Gen Clause 6.11 ISED RSS-210 Annex B.6 PASS 3 Fundamental Field Strength CFR 47 FCC §15.225(a)(b)(c)(d) ISED RSS-Gen Clause 6.12 ISED RSS-210 Annex B.6 PASS 4 Radiated Emissions CFR 47 FCC§15.209(a) CFR 47 FCC§15.225(d) ISED RSS-Gen Clause 6.13 ISED RSS-210 Annex B.6 PASS 5 Band Edge Radiated Emissions CFR 47 FCC §15.209(a) CFR 47 FCC §15.225(c)(d) ISED RSS-Gen Clause 6.13 ISED RSS-210 Annex B.6 PASS 6 Conducted Emission Test for AC Power Port CFR 47 FCC §15.207 ISED RSS-Gen Clause 8.8 PASS 7 Antenna Requirement CFR 47 FCC §15.203 ISED RSS-Gen Clause 6.8 PASS Note 1: This test report is only published to and used by the applicant, and it is not for evidence purpose in China. Note 2: The measurement result for the sample received is <Pass> according to < CFR 47 FCC PART 15 SUBPART C, ISED RSS-210 Issue 11 and ISED RSS-GEN Issue 5 > when <Simple Acceptance> decision rule is applied. REPORT NO.: 4791923606.2-1-RF-1 Page 4 of 36 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0059 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. . TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................. 5 2. TEST METHODOLOGY ..................................................................................................... 6 3. FACILITIES AND ACCREDITATION ................................................................................. 6 4. CALIBRATION AND UNCERTAINTY ................................................................................ 7 4.1. MEASURING INSTRUMENT CALIBRATION ............................................................. 7 4.2. MEASUREMENT UNCERTAINTY .............................................................................. 7 5. EQUIPMENT UNDER TEST ............................................................................................... 8 5.1. DESCRIPTION OF EUT ............................................................................................. 8 5.2. MAXIMUM FIELD STRENGTH ................................................................................... 8 5.3. DESCRIPTION OF AVAILABLE ANTENNAS ............................................................. 8 5.4. TEST ENVIRONMENT ............................................................................................... 9 5.5. DESCRIPTION OF TEST SETUP .............................................................................10 5.6. MEASURING INSTRUMENT AND SOFTWARE USED ............................................11 6. ANTENNA PORT TEST RESULTS ...................................................................................12 6.1. 99% & 20dB BANDWIDTH ........................................................................................12 6.2. TRANSMITTER FREQUENCY STABILITY ...............................................................14 7. RADIATED EMISSION TEST RESULTS...........................................................................16 7.1. FIELD STRENGTH OF INTENTIONAL EMISSIONS .................................................23 7.2. SPURIOUS EMISSIONS BELOW 1GHz AND ABOVE 30MHz ..................................24 7.3. SPURIOUS EMISSIONS BELOW 30MHz .................................................................26 8. AC POWER LINE CONDUCTED EMISSIONS ..................................................................29 9. ANTENNA REQUIREMENTS ............................................................................................35 REPORT NO.: 4791923606.2-1-RF-1 Page 5 of 36 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0059 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. . 1. ATTESTATION OF TEST RESULTS Applicant Information Company Name…

Text truncated - open the document above for the full version.

A B C D E F 2 3 4 5 NOTES: (UNLESS OTHERWISE SPECIFIED) I. INTERPRET DIMENSIONS AND TOLERANCES PER ASME Yl4.5M, 1994. IT IS EXPECTED THAT THE SUPPLIER UNDERSTAND AND COMPLY WITH ALL TOLERANCES AS DESCRIBED IN THIS STANDARD AND APPLIED TO THIS DRAWING SPC 2. TOLERANCES DESIGNATED WITH THE SYMBOL O SHALL BE PRODUCED WITH STATISTICAL TOLERANCE PROCESS CONTROLS. IN ORDER TO USE THE TOLERANCE ON A FEATURE, THE STATISTICAL PROCESS (CP, CPK, ETC) OF THE PART MUST BE VALIDATED AND APPROVED BY A SQUARE PRODUCT DESIGN ENGINEER. 3. MARK SQUARE PART NUMBER, REVISION LEVEL WITH (2.50MM) MINIMUM HIGH CHARACTERS, 0.15MM DEEP, APPROXIMATELY WHERE INDICATED. 4. PART MUST COMPLY WITH REGULATED SUBSTANCE REQUIREMENTS: A. EUROPEAN RoHS DIRECTIVE, 2002/95/EC 5. FOR LINER PULL TABS, POSITION SHOWN ARE SUGGESTIONS ONLY. VENDOR MAY MODIFY IF REQUIRED. 6 . COAT I NG TH I CK NESS : 0 . 0 5 � 0 . I 5 MM , COAT I NG MA TE R I AL : HUDSON NARY UV 9 3 0 TD S THREE -PR 00 F GLUE , COATING MACHINE: LSS-U450-S 7. APPLY GLUE AROUND THE PARTS, GLUE SHOULD NOT EXTEND BEYOND THE FPC EDGE. LINER PU LL TAB ONLY = = = = 2,50 = r-- 6 7 REV DESCRIPTION OF REVISION XOI Initial release XO2 Change hole location, and fpc XO3. I Change hole local ion I. Change limited height on components. XO3 2 2. [large the hole diameters of ferrite. • 3. Move BTB connector location. 4. Enlarge VHB. length XO3. 3 Change VHB, add bend line and bend area. XO4 Shorten the length of flex, and change VHB style, add FAI & SPC dimension, conformal coat in area ITEM 4: 3M 467M P ADHESIVE XO5 Ch ange the VHB model lo Nitto 56115NSS . (O.O5MM THICK) OR EQ U IVALENT WITH LINER = = r-- = - - = 0.J <X) = = - = 8 DRAFTER DATE Danny Mi 2025.0307 Danny Mi 2025.03.10 Danny Mi 2025.03.12 Danny Mi 2025.03.18 Danny Mi 2025.03.28 Eve Liu 2025. 0704 Eve Liu 2025.0724 0, 0 0 I ,06 OVERALL� 0,20 FERRITE ..,__---'==== ===<===='F ==== =l====,==l==F<� -0,00 c o n f o rm a I - 1 =--= coating area (36 5*12) Components L i m i t e d h e i g h t : 2 . 5mm 36,50 44,50 54,50 Bending area &3 = = - r-- &3 145,6 ® &3 153,5 � 162,23 164,48 r-- r-- - SC,- w 0.J O'> - "<j- (@ 0 0 0 LINER PULL TAB ITEM I: A ( 5: I l 0,05 ADHESIVE E-FER-OO69 REFER TO PART DRAWING FOR DIMENSIONS ► - i ◄ 0, 38(\19 ffQ @o, 1 5 ► 11 ◄ B ( 5: I l B Nitto 561 I 5NSS AD HES I VE ( 0 I 5MM TH IC Kl 2 3 4 17, 9 5 W �----1------1.1 31,95@ �--+------+--------1-,J 2,60 51,00 � ----='-------+--.::::U 0, 4 0 0, 6 0 8,00 2,60 ,...."===i====l====i=====s-�L......f - 64, 90 R4,OO LINER PULL TAB &JBend line © PROJECT: Ml M2 SI S2 p I P2 X2c 0.05 0. I 0. I 0.2 0.05 0. I 6•30 0. I 0.2 0. 15 0.25 0. I 0.25 $-E3- 30-S0 0. 15 0.25 0.2 0.3 0. 15 0.3 80•180 0. 15 0.3 0.25 0.45 0.2 0.45 UN IT'S: mm 180•315 0.2 0.5 0.3 0.5 0.25 0.6 MAT'L: 315•800 0.3 0.7 0.4 0.8 0.35 0.8 ANG. TOL± 0. 3 ° Q'TY: 5 6 CAD NAME: 125,60 SCALE I :2 ITEM 3: TONGLI TL-C6O1OWG CONDUCTIVE PSA (O. IMM THICK) OR EQUIVALENT WITH LINER ITEM 2: 3M 4701-30 PORON FOAM (O.3MM THICK) OR EQUIVALENT WITH LINER [F@ �Cs@ ITll u=u® A-FPC-0408 FU TAI HUA PRECISION IND.CO.LTD PART DESCRIPTION: HON HAI PIN REV FPCA, NFC, Config A, X2c 1A 72DQPIO-GVF-G xos APPD: DA TE: CUSTOMER PIN: REV CHK: DA TE: A-FPC-0408 06 DR: Eve Liu DA TE: 2025.0724 4:5 SHEET: I / I 7 8 A B C D E F A3-C