2AF6B-M310All-in-One. 5G

RAK M310/M320 User Manual Simple configuration guide for developers, private LTE&5G and some other usage NOTE: This is a beta version document, contact us for more details. Installation Attention: Good GPS signal is required to activate and run 4G&5G radios. Take out device from package, assemble device with pedestal. Put device close to window. Connect GPS antenna to the device, and put out the antenna outside the window to get a good GPS signal. Connect the PoE power source to the WAN/PoE port on the device to power it up. Hardware specifications M310M320 NetworkLTE✓✓ 5G NR✓ LoRaWAN ® ✓✓ Wi-Fi 6 FCC ID 2AF6B-M310 2AF6B-M320 Contain FCC ID 2ABCB-RPICM4 2ABCB-RPICM4 Frequency bandB48 (3550 to 3700 MHz) B48, n48 (3550 to 3700 MHz) 4G/5G Core✓✓ PoE (802.3bt)✓✓ ComputingQuad core Cortex-A72 (ARM v8)Quad core Cortex-A72 (ARM v8) RAM4GB4GB eMMC32G32G Ethernet2.5G2.5G Tx power2 x 24 dBm/port2 x 24 dBm/port Power consumption30W (MAX)55W (MAX) USBType-C USB3.0 ButtonOne pairing button LED Tricolor LED (top side) Antenna LTE Internal antenna 5G NR Internal antenna LoRaWAN ® Internal antenna (supporting switch to external antenna) GPS Internal antenna (supporting switch to external antenna) Dimension 300 mm x 311.5 mm x 79 mm Ingress protectionIP30 Enclosure materialPlastics Weight4.2 kg Operating temperature-5°C to 45 ̊C Storage temperature-10°C to 50°C Humidity5% to 95% RH Atmospheric pressure70 kPa to 106 kPa Take RAK M310/M320 as a pure 4G and/or 5G radio, connect to external customer's own EPC/5GC. Please refer to chapter Configuration with External EPC/5GC Take RAK M310/M320 as an All in One device, running with RAK's open source Magma AGW inside. Please refer to chapter Configuration with Magma inside Configuration There's 4 major scenario you can use RAK M310/M320 device for, customers are required to configure the device according to their usage. Take RAK M310/M320 as an All in One device, runing with RAK's open source Open5GS inside. Please refer to chapter Configuration with Open5GS inside  Take RAK M310/M320 as an All in One device, with customers own EPC/5GC on open hardware CM4. Please refer to chapter Configuration with Customer's EPC/5GC inside Configuration with External EPC/5GC This chapter will describe basic configuration to connect eNodeB and/or gNodeB to customer's own EPC and/or 5GC, after these configuration, the eNodeB and/or gNodeB start serving. For more configuration details, please refer to MNTD. 5G LTE Configuration Guide and MNTD. 5G NR Configuration Guide Here's the basic steps configuring RAK M310/M320 with customer's own EPC/5GC:  Step 1: Prepare your PC or laptop's network to access to RAK M310/M320's local web  Step 2: Login to eNodeB and/or gNodeB's local web  Step 3: Configure eNodeB's S1 and/or gNodeB's N2 interface network according to your requirement  Step 4: Configure eNodeB and/or gNodeB's PLMN, TAC, Cell ID, MME and/or AMF IP address, etc  Step 5: Configure NTP server for eNodeB and/or gNodeB.  Step 6: Reboot eNodeB and/or gNodeB to use new configuration Please plan parameters below before configuration: Item Parameter Description IP Address OAM IP OAM uses a separate IP address to access to local web, 192.168.150.123/24, etc. Core IP MME IP for 4G eNodeB, AMF IP for 5G gNodeB, planned by the customer. Cell Parameters PLMN Planned by the customer. TAC Planned by the customer. Cell ID Planned by the customer. NTP Server NTP Server Address Planned by the customer. NOTE: NTP is required to activate and run 4G eNodeB and 5G gNodeB. Step 1 Prepare Network to Access to Local Web RAK M310&M320's 4G eNodeB configured with a static IP address 192.168.150.1/24 to serve for local web access. RAK M320's 5G gNodeB configured with a static IP address 192.168.150.7/24 to serve for local web access. Customers are require to configure their PC or laptop's ethernet port to subnet 192.168.150.0/24 to access eNodeB or gNodeB's local web managment, bridged by a router/switch or connected directly. The network connection may looks like this: Step 2 Login to Local Web RAK M310&M320's eNodeB local web serving URL is: https://192.168.150.1 with default user name admin and default password admin. RAK M320's gNodeB local web serving URL is http://192.168.150.7 with default user name new_user and default password gNB@2014 Here we recommend using Chrome browser to achieve the best effect. Step 3 Configure eNodeB's S1 and or gNodeB's N2 Interface Mostly the eNodeB‘s S1 and/or gNodeB's N2 interface are required to have a static IP addresse to connect to customer's EPC and/or 5GC. Dynamic IP address allocated by DHCP is also supported, all depend on customers network requirement. Configure eNodeB's S1 Interface with Static IP Login to eNodeB's local web via https://192.168.150.1, navigate to Network > WAN/LAN page, click the edit button, and select Static IP in IP Access Mode, after that edit the static IP address, netmask and gateway for the eNodeB's S1 port. Then click OK and Save button to save the configuration. Configure eNodeB's S1 Interface with Dynamic IP Login to eNodeB's local web via https://192.168.150.1, navigate to Network > WAN/LAN page, click the edit button, and select DHCP in IP Access Mode to enable DHCP client on the eNodeB's WAN port. Then click OK and Save button to save the configuration. Configure gNodeB's N2 Interface with Static IP Login to gNodeB's local web via http://192.168.150.7, navigate to Network > WAN/LAN page, lick Open button to expand the configuration table, then click the edit button, and select Static IP in Addressing Mode field, Ng in Port Type field, after that edit the static IP address, netmask and gateway for the gNodeB's N2 port. Then click OK and Save button to save the configuration. Configure gNodeB's N2 Interface with Dynamic IP Login to gNodeB's local web via http://192.168.150.7, navigate to Network > WAN/LAN page, click Open button to expand the configuration table, then click Edit button to pop up edit window, an…

Text truncated - open the document above for the full version.

Applicant Declaration QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Shenzhen RAKwireless Technology Co.,Ltd. Address Room 506, Building B, New Compark, Pingshan First Road, Taoyuan Street, Nanshan District, Shenzhen, Guangdong, China Grantee Code 2AF6B FCC ID 2AF6B-M310 Authorized Contact Name Vivian Xu Contact Email [email protected] Contact Phone 19926584202 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Shenzhen RAKwireless Technology Co.,Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Shenzhen RAKwireless Technology Co.,Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [ is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date: 2023.04.18 Print Name: Vivian Xu Title: engineer *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Shenzhen RAKwireless Technology Co.,Ltd. Date: 2023-04-18 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AF6B-M310 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) and Keny Xu in SGS- CSTC Standards Technical Services Co., Ltd. (SGS) to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own.. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Shenzhen RAKwireless Technology Co.,Ltd. This authorization is valid until further written notice from the applicant. Print Name: Vivian Xu Title: Engineer Signature: On behalf of Company: Shenzhen RAKwireless Technology Co.,Ltd. Telephone: 19926584202 E-mail: [email protected]

TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidentiality Request regarding application for FCC ID: 2AF6B-M310 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions BOM List Tune up procedure The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Keny Xu, Manager SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch E&E Lab Authorized agent for Shenzhen RAKwireless Technology Co.,Ltd.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 1 of 7 Appendix External Photos for SZCR2212004132AT FCC ID:2AF6B-M310 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 2 of 7 EUT Constructional Details (EUT Photos) EUT with fiberglass Antenna (5.8dBi) EUT with fiberglass Antenna (5.1dBi) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 3 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 4 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 5 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 6 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 7 of 7 Lora Antenna connector: - End of the Appendix -

Neue Haas Grotesk Display Pro - 45 Light - 6pt

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 1 of 7 Appendix Internal Photos for SZCR2212004132AT FCC ID:2AF6B-M310 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 2 of 7 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 3 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 4 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 5 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 6 of 7 Antenna Location: SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 7 of 7 - End of the Appendix -

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR221200413204 Page: 1 of 9 Keny Xu EMC Laboratory Manager RF EXPOSURE EVALUATION REPORT Application No.: SZCR2212004132AT Applicant: Shenzhen RAKwireless Technology Co.,Ltd. Address of Applicant: Room 506, Building B, New Compark, Pingshan First Road, Taoyuan Street, Nanshan District, Shenzhen, China Manufacturer: Shenzhen RAKwireless Technology Co.,Ltd. Address of Manufacturer: Room 506, Building B, New Compark, Pingshan First Road, Taoyuan Street, Nanshan District, Shenzhen, China Equipment Under Test (EUT): EUT Name: All-in-One. 5G Model No.: M310 Trade Mark: RAK, MNTD FCC ID: 2AF6B-M310 Standard(s) : FCC Rules 47 CFR §2.1091 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2022-12-08 Date of Evaluation: 2023-03-14 to 2023-04-08 Date of Issue: 2023-04-19 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR221200413204 Page: 2 of 9 Revision Record Version Chapter Date Modifier Remark 01 2023-04-19 Original Authorized for issue by: Benson Wang/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR221200413204 Page: 3 of 9 2 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Contents .................................................................................................................................................... 3 3 General Information .................................................................................................................................. 4 3.1 General Description of E.U.T. ............................................................................................................ 4 3.2 Details of E.U.T. ................................................................................................................................. 4 3.3 Separation Distance ........................................................................................................................... 5 3.4 Test Location ...................................................................................................................................... 6 3.5 Test Facility ........................................................................................................................................ 6 3.6 Deviation from Standards ................................................................................................................... 6 3.7 Abnormalities from Standard Conditions ........................................................................................... 6 4 FCC Radiofrequency radiation exposure limits .................................................................................... 7 5 Measurement and Calculation ................................................................................................................. 8 5.1 Maximum transmit power ................................................................................................................... 8 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR221200413204 Page: 4 of 9 3 General Information 3.1 General Description of E.U.T. Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Power supply: Powered by POE adapter: Adapter model: RP026-5601080YE Input: AC 100-240V 50/60Hz Output: DC 56.0V 1.08A Cable: Lan cable x 2: 302cm unshielded EUT Type: CBSD Category of EUT: Category A LTE Operation Frequency Band: Band 48 (3550-3700MHz) Test Mode: E-TM1.1; E-TM3.2; E-TM3.1; Modulation Type: QPSK, 16QAM, 64QAM Bandwidth: 10MHz; 20MHz Transmission (TX) and Receiving (RX) Antenna Ports: TX port: 2 MIMO supported 2*2 UL Antenna Type: Integral Antenna Antenna Gain: 5.5dBi Technical Specification of Lora DTS Operating Frequency: 904.6MHz (SF8) 923.3 - 927.5MHz（SF7 - SF12） Type of Modulation: LoRa Data Rate: SF7 - SF12, SF8 ( 904.6MHz ) Channel Number: 9 Channels Channel Separation: 600KHz Occupied Bandwidth: 500KHz Technical Specification of Lora Hybrid Operating Frequency: 903.9 - 905.3MHz Type of Modulation: LoRa Data Rate: SF7 -SF9 - SF10 Channel Number: 8 Channels (DSS & DTS) Channel Separation: 200KHz Occupied Bandwidth: 125KHz SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR221200413204 Page: 5 of 9 Antenna Gain: Integral Antenna: 3dBi Fiberglass Antenna 1 (RAKARG14): 5.8dBi; Fiberglass Antenna 2 (RAKARG19): 5.1dBi; 1. The EUT have a integral antenna and two different Fiberglass antennas. The Integral antenna and Fiberglass antenna cannot transmit simultaneously. 2. The Fiberglass Antenna 1 and 2 have the same type and RF characteristics as equivalent antenna, so, only the Fiberglass Antenna 1(High antenna gain) was tested in the report. Note: (1)The antenna gain value is provided by the customer. The test lab will not be responsible for wrong test result due to incorrect information about antenna gain values. 3.3 Separation Distance Minimum test separation distance: 20cm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR221200413204 Page: 6 of 9 3.4 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Sh…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: Page: 1 of 24 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2212004132AT Applicant: Shenzhen RAKwireless Technology Co.,Ltd. Address of Applicant: Room 506, Building B, New Compark, Pingshan First Road, Taoyuan Street, Nanshan District, Shenzhen, China Manufacturer: Shenzhen RAKwireless Technology Co.,Ltd. Address of Manufacturer: Room 506, Building B, New Compark, Pingshan First Road, Taoyuan Street, Nanshan District, Shenzhen, China Equipment Under Test (EUT): EUT Name: All-in-One. 5G Model No.: M310 Trade Mark: RAK, MNTD FCC ID: 2AF6B-M310 Standard(s) : 47 CFR Part 2 47 CFR Part 96 subpart E Date of Receipt: 2022-12-08 Date of Test: 2023-03-14 to 2023-04-06 Date of Issue: 2023-04-19 Test Result: Pass * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: Page: 2 of 24 Revision Record Version Chapter Date Modifier Remark 01 2023-04-19 Original Authorized for issue by: Benson Wang/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: Page: 3 of 24 2 Test Summary Test Item FCC Rule No. Requirements Verdict Effective (Isotropic) Radiated Output Power Data & Maximum Power Spectral Density §2.1046 §96.41(b) EIRP≤ 30dBm/10MHz(LTE Band 48) PSD≤ 20dBm/MHz(LTE Band 48) PASS Peak-Average Ratio §96.41(g) ≤13dB PASS Modulation Characteristics §2.1047 Digital modulation PASS Bandwidth §2.1049(h) OBW: No limit EBW: No limit PASS Band Edge Compliance §2.1051 §96.41(e) Refer to clause 6.4 for LTE Band48 PASS Spurious emissions at antenna terminals §2.1051 §96.41(e) Refer to clause 6.5 for LTE Band48 PASS Field strength of spurious radiation §2.1051 §96.41(e) Refer to clause 6.6 for LTE Band48 PASS Frequency stability §2.1055 ≤ ±2.5ppm. PASS SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: Page: 4 of 24 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 Test Summary ........................................................................................................................................... 3 3 Contents .................................................................................................................................................... 4 4 General Information .................................................................................................................................. 6 4.1 Details of E.U.T. ................................................................................................................................. 6 4.2 Test Frequency .................................................................................................................................. 7 4.3 Test Environment ............................................................................................................................... 7 4.4 Description of Support Units .............................................................................................................. 7 4.5 Measurement Uncertainty .................................................................................................................. 8 4.6 Test Location ...................................................................................................................................... 9 4.7 Test Facility ........................................................................................................................................ 9 4.8 Deviation from Standards ................................................................................................................... 9 4.9 Abnormalities from Standard Conditions ........................................................................................... 9 5 Equipment List ........................................................................................................................................ 10 6 Radio Spectrum Matter Test Results .................................................................................................... 12 6.1 Effective (Isotropic) Radiated Output Power & Maximum Power Spectral Density ......................... 12 6.1.1 E.U.T. Operation .......................................................................................................................... 12 6.1.2 Test Setup Diagram ..................................................................................................................... 12 6.1.3 Measurement Data ...................................................................................................................... 12 6.2 Peak-Average Ratio ......................................................................................................................... 13 6.2.1 E.U.T. Operation .......................................................................................................................... 13 6.2.2 Test Setup Diagram ..................................................................................................................... 13 6.2.3 Measurement Data ...................................................................................................................... 13 6.3 Bandwidth ......................................................................................................................................... 14 6.3.1 E.U.T. Operation .......................................................................................................................... 14 6.3.2 Test Setup Diagram .................................................................................................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 7 Effective (Isotropic) Radiated Output Power Data & Maximum Power Spectral Density Conducted power (dBm) Conducted power (dBm) Conducted Power (dBm/10MHz) Conducted Power (dBm/10MHz) PSD (dBm/MHz) PSD (dBm/MHz) (Port 1) (Port 2) (Port 1) (Port 2) (Port 1) (Port 2) TM1.1 10M 3555MHz 5.50 1.67 18.04 18.31 22.86 28.36 18.05 18.32 22.87 28.37 30.00 9.30 9.53 14.10 19.60 20.00 Pass TM1.1 10M 3625MHz 5.50 1.67 17.62 18.34 22.68 28.18 17.66 18.36 22.70 28.20 30.00 9.29 9.78 14.22 19.72 20.00 Pass TM1.1 10M 3695MHz 5.50 1.67 17.57 17.77 22.35 27.85 17.58 17.80 22.37 27.87 30.00 8.88 9.23 13.74 19.24 20.00 Pass TM1.1 20M 3560MHz 5.50 1.67 19.53 19.80 24.35 29.85 16.99 17.24 21.80 27.30 30.00 7.66 7.88 12.45 17.95 20.00 Pass TM1.1 20M 3625MHz 5.50 1.67 19.05 19.66 24.05 29.55 16.44 17.16 21.50 27.00 30.00 6.76 7.46 11.80 17.30 20.00 Pass TM1.1 20M 3690MHz 5.50 1.67 19.70 20.08 24.57 30.07 16.82 17.48 21.84 27.34 30.00 6.81 7.08 11.63 17.13 20.00 Pass TM3.1 10M 3555MHz 5.50 1.67 18.22 18.35 22.97 28.47 18.20 18.35 22.96 28.46 30.00 9.25 9.55 14.08 19.58 20.00 Pass TM3.1 10M 3625MHz 5.50 1.67 17.61 17.84 22.41 27.91 17.64 17.87 22.44 27.94 30.00 8.98 9.69 14.03 19.53 20.00 Pass TM3.1 10M 3695MHz 5.50 1.67 17.93 18.10 22.70 28.20 17.94 18.12 22.71 28.21 30.00 9.09 9.66 14.06 19.56 20.00 Pass TM3.1 20M 3560MHz 5.50 1.67 19.44 19.75 24.28 29.78 16.81 17.10 21.64 27.14 30.00 7.69 8.02 12.54 18.04 20.00 Pass TM3.1 20M 3625MHz 5.50 1.67 19.11 19.63 24.06 29.56 16.56 17.07 21.50 27.00 30.00 6.88 7.25 11.75 17.25 20.00 Pass TM3.1 20M 3690MHz 5.50 1.67 19.34 20.04 24.38 29.88 16.81 17.51 21.85 27.35 30.00 6.55 7.26 11.60 17.10 20.00 Pass TM3.2 10M 3555MHz 5.50 1.67 16.85 16.94 21.58 27.08 16.85 16.97 21.59 27.09 30.00 9.23 9.09 13.84 19.34 20.00 Pass TM3.2 10M 3625MHz 5.50 1.67 16.38 16.70 21.22 26.72 16.41 16.72 21.25 26.75 30.00 9.08 9.32 13.88 19.38 20.00 Pass TM3.2 10M 3695MHz 5.50 1.67 16.52 16.73 21.31 26.81 16.53 16.76 21.33 26.83 30.00 9.13 9.14 13.82 19.32 20.00 Pass TM3.2 20M 3560MHz 5.50 1.67 19.25 19.50 24.06 29.56 16.88 17.11 21.68 27.18 30.00 8.52 8.79 13.34 18.84 20.00 Pass TM3.2 20M 3625MHz 5.50 1.67 19.09 19.39 23.92 29.42 16.73 17.08 21.59 27.09 30.00 3.72 7.20 10.48 15.98 20.00 Pass TM3.2 20M 3690MHz 5.50 1.67 19.13 19.49 23.99 29.49 16.78 17.11 21.63 27.13 30.00 6.83 7.04 11.62 17.12 20.00 Pass Verdict Limit (dBm/10MHz) EIRP (dBm/10MHz) Test mode Bandwidth (MHz) Frequency (MHz) Gain (dbi) DCCF (dB) Conducted power (dBm) EIRP (dBm) Conducted Power (dBm/10MHz) PSD (dBm/MHz) EIRP PSD (dBm/MHz) Limit (dBm/MHz) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 7 Port1_10M_3555MHz_TM1.1_CHL_PSD Port1_10M_3625MHz_TM1.1_CHM_PSD Port1_10M_3695MHz_TM1.1_CHH_PSD Port1_20M_3560MHz_TM1.1_CHL_PSD Port1_20M_3625MHz_TM1.1_CHM_PSD Port1_20M_3690MHz_TM1.1_CHH_PSD SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 7 Port2_10M_3555MHz_TM1.1_CHL_PSD Port2_10M_3625MHz_TM1.1_CHM_PSD Port2_10M_3695MHz_TM1.1_CHH_PSD Port2_20M_3560MHz_TM1.1_CHL_PSD Port2_20M_3625MHz_TM1.1_CHM_PSD Port2_20M_3690MHz_TM1.1_CHH_PSD SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 7 Port1_10M_3555MHz_TM3.1_CHL_PSD Port1_10M_3625MHz_TM3.1_CHM_PSD Port1_10M_3695MHz_TM3.1_CHH_PSD Port1_20M_3560MHz_TM3.1_CHL_PSD Port1_20M_3625MHz_TM3.1_CHM_PSD Port1_20M_3690MHz_TM3.1_CHH_PSD SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 7 Port2_10M_3555MHz_TM3.1_CHL_PSD Port2_10M_3625MHz_TM3.1_CHM_PSD Port2_10M_3695MHz_TM3.1_CHH_PSD Port2_20M_3560MHz_TM3.1_CHL_PSD Port2_20M_3625MHz_TM3.1_CHM_PSD Port2_20M_3690MHz_TM3.1_CHH_PSD SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 6 of 7 Port1_10M_3555MHz_TM3.2_CHL_PSD Port1_10M_3625MHz_TM3.2_CHM_PSD Port1_10M_3695MHz_TM3.2_CHH_PSD Port1_20M_3560MHz_TM3.2_CHL_PSD Port1_20M_3625MHz_TM3.2_CHM_PSD Port1_20M_3690MHz_TM3.2_CHH_PSD SGS-CSTC Standards…

Text truncated - open the document above for the full version.