2AFG6-NFC01Module

广州视睿电子科技有限公司 Guangzhou Shirui Electronics Co.,Ltd. 版权CVTE所有，本文档内容属商业机密。未经允许，任何组织或个人不得以任何形式复制和传播。 Confidentiality Level: Confidential SPECIFICATION MODEL : SRT.NFC.01 Sales Territory : Globe Product Type : Module Document Encoding : 22092738 Approved by Shikun Checked by HW Approved by DC Please send the original back to us after you have approved and signed. Approved by customer Comments Approved by Company’s seal Customer’s Name: 版权CVTE所有，本文档内容属商业机密。未经允许，任何组织或个人不得以任何形式复制和传播。 REVISION HISTORY VERSION DATE BOARD ID PAGE DESCRIPTION AUTHOR V0 2022.09.27 SRT.NFC.01 B22291 All First Issued. Lucia 版权CVTE所有，本文档内容属商业机密。未经允许，任何组织或个人不得以任何形式复制和传播。 Content 1. CRITICAL MATERIALS of TV Part ....................................................................................... 1 2. CONFIGURATION & GENERAL PRECAUTIONS .............................................................. 2 3. DESCRIPTION ......................................................................................................................... 2 4. MECHANICAL DIMENSION ................................................................................................. 3 5. Safety warning .......................................................................................................................... 4 6. Module integration instructions ................................................................................................ 8 SRT.NFC.01 QR-ZZPJ-017A 版权CVTE所有，本文档内容属商业机密。未经允许，任何组织或个人不得以任何形式复制和传播。 1 1. CRITICAL MATERIALS of TV Part The table is for reference only, specific to prevail in kind. NAME TYPE BRAND BACKUP BACKUP SPXO Crystal,27.12MHz, ±10ppm, 20pF,SMD3225,SMD, CF271200201723 JWT -- -- Crystal,12MHz, ±20ppm, 20pF,SMD3225,SMD, CF271200201723 JWT -- -- SRT.NFC.01 QR-ZZPJ-017A 版权CVTE所有，本文档内容属商业机密。未经允许，任何组织或个人不得以任何形式复制和传播。 2 2. CONFIGURATION & GENERAL PRECAUTIONS  Relative humidity: ≤ 80%.  Storage temperature: -10~60°C.  Operation temperature: 0~40°C. 3. DESCRIPTION NFC is a near-field wireless communication technology that enables near-field communication, allowing the rapid exchange of a small amount of data between two objects. NFC mainly consists of three components: NFC sensor, NFC controller, and NFC protocol. The NFC sensor is used to detect the signal of another NFC device. When the NFC device is detected, it will pass the signal to the NFC controller, which will control the communication and data exchange of the NFC device and pass the data to the NFC protocol stack, which is responsible for processing and encrypting the data. Our NFC device mainly exists as a card reader, which recognizes external devices such as NFC cards and then performs some customized operations. SRT.NFC.01 QR-ZZPJ-017A 版权 CVTE 所有，本文档内容属商业机密。未经允许，任何组织或个人不得以任何形式复制和传播。 3 4. MECHANICAL DIMENSION NOTE: 1.板内顶层器件最高4.52mm； Ver . A0 配置 CNT SRSM.ENV_SENSOR.01 QR-ZZPJ-017A 版权 CVTE 所有，本文档内容属商业机密。未经允许，任何组织或个人不得以任何形式复制和传播。 4 5. Safety warning  Federal Communication Commi ssion Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interf erence in a residential installation. This equipment generates, uses, and can radia te radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful inte rference to radio communications. However, there is no guarante e that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be deter mined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from th at to which the receiver is connected. • Consult the dealer or an experien ced radio/TV technician for help.  FCC Caution: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interf erence received, including interferen ce that may cause undesired operation. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance cou ld void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set fo rth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.  Non-modificati on Statement: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to oper ate the equipment. SRSM.ENV_SENSOR.01 QR-ZZPJ-017A 版权 CVTE 所有，本文档内容属商业机密。未经允许，任何组织或个人不得以任何形式复制和传播。 5  IC Radiation Exposure Statement for Canada This device contains licence-exempt transm itter(s)/receiver(s) that comply with Innova tion, Science and Economic Development Ca nada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2.This device must accept any interference, including interf erence that may cause undesire d operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’I nnovation, Sciences et Développ ement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1.L’appareil ne doit pas produire de brouillage; 2.L’appareil doit accepter tout brouillage radi oélectrique subi, même si le brouillage est susceptible d’en compromettre le fon ctionnement. This equipment complies with ISED RSS-102 radia tion exposure limits set f…

Text truncated - open the document above for the full version.

Guangzhou Shirui Electronics Co., Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 05-05-2023 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: 2AFG6-NFC01 Guangzhou Shirui Electronics Co., Ltd (“the applicant”) certifies that, as of the date of the filing of the application, TianHeng Consulting, LLC is our designated U.S. agent for service of process for the above referenced FCC ID. Guangzhou Shirui Electronics Co., Ltd accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. TianHeng Consulting, LLC accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Sincerely, Designated U.S. Agent Information: Name: TianHeng Consulting, LLC FRN: 0033401258 Contact Person: Hualing Dong Address: 392 Andover Street, Wilmington, MA 01887, United States Tel.: +1 617-997-4010 Email: [email protected] U.S. Agent Signature: Applicant: Company Name: Guangzhou Shirui Electronics Co., Ltd FRN: 0024773087 Grantee Code: 2AFG6 Contact Name: Sarah Sun Address: 192 Kezhu Road, Scientech Park, guangzhou Economic Technology Development District, Guangzhou, China Tel.: +86-13640798230 Email: [email protected] Applicant Signature: Hualing Dong, President

Guangzhou Shirui Electronics Co., Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 05‐05‐2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AFG6‐NFC01 [Guangzhou Shirui Electronics Co., Ltd] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Sarah Sun Guangzhou Shirui Electronics Co., Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 05‐05‐2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AFG6‐NFC01 [Guangzhou Shirui Electronics Co., Ltd] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Sarah Sun

Guangzhou Shirui Electronics Co., Ltd Declaration of Authorization We Name: Guangzhou Shirui Electronics Co., Ltd Address: 192 Kezhu Road, Scientech Park, guangzhou conomic Technology Development District, City: Guangzhou Country: China Declare that: Name Representative of agent: Ms. Rose Liu Agent Company name: BTL Inc. Address: No.3 Jinshagang 1st Road, Shixia, Dalang Town City: Dong Guan Country: China is authorized to apply for Certification and signing related documents of the following product(s), including 731 form(s): Product description: Module Type designation: SRT.NFC.01 Trademark: N/A FCC ID: 2AFG6-NFC01 on our behalf. Date: 2023-02-27 City: Guangzhou Name: Sarah Sun Function: Regulatory Engineer Signature: .

Guangzhou Shirui Electronics Co., Ltd Date: 2023.02.27 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AFG6-NFC01 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Block Diagram Schematics Operation Description 4. Schematics 5. Block Diagram 6. Operation Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Signature Sarah Sun

Guangzhou Shirui Electronics Co., Ltd Modular Approval Request FCC (KDB 996369 D01 & Part 15.212) FCC ID: 2AFG6-NFC01 Items to be covered by Limited Single modular transmitters. Answer from applicant 1. The modular transmitter must have its own RF shielding. No. Please refer to External Photos. 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. YES, U5 PN7160 is used for the function. 3. The modular transmitter must have its own power supply regulation. No, the modular does not have its own power supply regulation. 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(b)(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). YES, it is internal antenna. 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. Yes, the module is tested in a stand-alone configuration as the test photos show. 6. The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number in accordance with 15.212 (a)(1)(vi)(A) / (B). YES, please refer to the exhibition label sample for this module. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. YES, please refer to the user manual. 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 1.1310, 2.1091, 2.1093, and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance. Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. YES, RF exposure statement is attached in the user manual. Note: A limited modular approval (LMA) may be granted for single or split modular transmitters that comply partially with the requirements above. Host model: TB65GA , OTS-PCAP65V3T1，TB75GA, OTS-PCAP75V3T1, TB86GA，OTS-P CAP86V3T1 (Interactive Intelligent Panel) Host size: 65inches ，75 inches，86inches Module installation location: Name and surname of applicant (or authorized representative): Sarah Sun Date: 2023-05-05  Signature: ___________________________

Guangzhou Shirui Electronics Co., Ltd Declaration of Similarity We, the undersigning company Company Name: Guangzhou Shirui Electronics Co., Ltd Address: 192 Kezhu Road, Scientech Park, guangzhou conomic Technology Development District, Guangzhou, China Declare that: Product description: Module Type designation: SRT.NFC.01 Trademark: N/A Hereby we confirm the below information. Host: Interactive Intelligent Panel(TB65GA, OTS-PCAP65V3T1 ，TB75GA, OTS-PCAP75V3T1, TB86GA，OTS-PCAP86V3T1). The SRT.NFC.01 module will be placed inside TB65GA, OTS-PCAP65V3T1， TB75GA, OTS-PCAP75V3T1, TB86GA ，OTS-PCAP86V3T1. The Six Host differences are different in size and trademark. In this certification, TB65GA was selected as the test Host. on our behalf. Date: 2023-05-05 City: Guangzhou Name: Sarah Sun Function: Regulatory Engineer Signature:

Report No.: FCC022022-6545 Appendix Page 1 / 4TIRT-TRF/FCC01-2(E):2021A0 Appendix for Internal Photographs Project No: 022022-6545 Equipment: Module Model: SRT.NFC.01 FCC ID: 2AFG6-NFC01 Report No.: FCC022022-6545 Appendix Page 2 / 4 TIRT-TRF/FCC01-2(E):2021A0 The red box shows the location of the NFC module Report No.: FCC022022-6545 Appendix Page 3 / 4 TIRT-TRF/FCC01-2(E):2021A0 antenna Report No.: FCC022022-6545 Appendix Page 4 / 4 TIRT-TRF/FCC01-2(E):2021A0 END

Report No.: FCC022022-6545RF1 Page 1 of 3 Product Name: Module Report No: FCC022022-6545RF1 Product Model: SRT.NFC.01 Security Classification: Open Version: V1.0 Total Page: 3 TIRT Testing Report Prepared By: Checked By: Approved By: Stone Tang Randy Lv Daniel Chen Report No.: FCC022022-6545RF1 Page 2 of 3 FCC RF EXPOSURE REPORT FCC ID: 2AFG6-NFC01 Project No. : 02022-6545 Equipment : Module Brand Name : -- Test Model : SRT.NFC.01 Series Model : N/A Applicant : Guangzhou Shirui Electronics Co.,Ltd. Address : 192 Kezhu Road, Scientech Park, Guangzhou Economic ＆ Technology Development District, Guangzhou,Guangdong,China Manufacturer : Guangzhou Shirui Electronics Co.,Ltd. Address : 192 Kezhu Road, Scientech Park, Guangzhou Economic ＆ Technology Development District, Guangzhou,Guangdong,China Date of Receipt : Dec. 29, 2022 Date of Test : Dec. 30, 2022~Jan. 04, 2023 Issued Date : Jan. 12, 2023 Report Version : V1.0 Test Sample : 20221229022322 Standard(s) : FCC Guidelines for Human Exposure IEEE C95.1 & KDB447498 D01 • The test result referred exclusively to the presented test model /sample. • Without written approval of TIRT Inc. the test report shall not reproduced except in full. Lab: Beijing TIRT Technology Service Co.,Ltd Shenzhen Add: 101, 3 # Factory Building, Gongjin Electronics Shatin Community, Kengzi Street, Pingshan District, Shenzhen, China TEL: +86-0755-27087573 Report No.: FCC022022-6545RF1 Page 3 of 3 1. GENERAL INFORMATION 1.1 GENERAL DESCRIPTION OF EUT Equipment Module Brand Name -- Test Model SRT.NFC.01 Series Model N/A Model Difference(s) N/A Power Source 5V Power Rating 1.5W Operation Frequency 13.56 MHz Antenna Type PCB Host: Interactive Intelligent Panel TB65GA, TB75GA, TB86GA, OTS-PCAP65V3T1, OTS-PCAP75V3T1, OTS-PCAP86V3T1. The SRT.NFC.01 module will be placed inside TB65GA, TB75GA, TB86GA, OTS-PCAP65V3T1, OTS-PCAP75V3T1 and OTS-PCAP86V3T1, the six Host differences are different in size. In this certification, TB65GA was selected as the test Host. TB65GA and OTS-PCAP65V3T1 only have different model names, and the others are identical. TB75GA and OTS-PCAP75V3T1 only have different model names, and the others are identical. TB86GA and OTS-PCAP86V3T1 only have different model names, and the others are identical. Note: 1. For a more detailed features description, please refer to the manufacturer’s specifications or the user's manual. 2. Channel List: Test Ch nnel Test Frequency (MHz) 01 13.56 2. GENERAL CONCULUSION: 2.1 MAXIMUM MEASURED TRANSMITTER POWER: Max. H-field strength(dBuV/m) Output Power (dBm) Output Power (mW) Limit (mW) 53.82 -31.87 0.0007 10 According to FCC KDB447498 D01 V07, Appendix A, SAR Test Exclusion Thresholds for 100MHz-6GHz and≤50 mm The maximum measured output peak power of this EUT is 0.0007 mW, less than 10mW at 20cm distance. Conclusion: No SAR evaluation required since transmitter power is below FCC threshold. End of Test Report

Report No.: FC022022-6545RF0 Page 1 of 38 Product Name: Module Report No: FCC022022-6545RF0 Product Model: SRT.NFC.01 Security Classification: Open Version: V1.0 Total Page: 38 TIRT Testing Report Prepared By: Checked By: Approved By: Stone Tang Randy Lv Daniel Chen Report No.: FC022022-6545RF0 Page 2 of 38 FCC Radio Test Report FCC ID: 2AFG6-NFC01 This report concerns: Original Grant Project No. : 02022-6545 Equipment : Module Brand Name : -- Test Model : SRT.NFC.01 Series Model : N/A Applicant : Guangzhou Shirui Electronics Co.,Ltd. Address : 192 Kezhu Road, Scientech Park, Guangzhou Economic ＆ Technology Development District, Guangzhou,Guangdong,China Manufacturer : Guangzhou Shirui Electronics Co.,Ltd. Address : 192 Kezhu Road, Scientech Park, Guangzhou Economic ＆ Technology Development District, Guangzhou,Guangdong,China Date of Receipt : Dec. 29, 2022 Date of Test : Dec. 30, 2022~Jan. 04, 2023 Issued Date : Jan. 12, 2023 Report Version : V1.0 Test Sample : 20221229022322 Standard(s) : FCC CFR Title 47, Part 15, Subpart C ANSI C63.10-2013 • The test result referred exclusively to the presented test model /sample. • Without written approval of TIRT Inc. the test report shall not reproduced except in full. Lab: Beijing TIRT Technology Service Co.,Ltd Shenzhen Add: 101, 3 # Factory Building, Gongjin Electronics Shatin Community, Kengzi Street, Pingshan District, Shenzhen, China TEL: +86-0755-27087573 Report No.: FC022022-6545RF0 Page 3 of 38 Table of Contents Page REPORT ISSUED HISTORY 5 1 . SUMMARY OF TEST RESULTS 6 1.1 TEST FACILITY 7 1.2 MEASUREMENT UNCERTAINTY 7 1.3 TEST ENVIRONMENT CONDITIONS 8 2 . GENERAL INFORMATION 9 2.1 GENERAL DESCRIPTION OF EUT 9 2.2 DESCRIPTION OF TEST MODES 10 2.3 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 11 2.4 SUPPORT UNITS 11 3 . AC POWER LINE CONDUCTED EMISSIONS 12 3.1 LIMIT 12 3.2 TEST PROCEDURE 12 3.3 DEVIATION FROM TEST STANDARD 12 3.4 TEST SETUP 13 3.5 EUT OPERATING CONDITIONS 13 3.6 TEST RESULTS 13 4 . RADIATED EMISSION 14 4.1 LIMIT 14 4.2 TEST PROCEDURE 15 4.3 DEVIATION FROM TEST STANDARD 15 4.4 TEST SETUP 16 4.5 EUT OPERATING CONDITIONS 17 4.6 TEST RESULTS - 9 KHZ TO 30 MHZ 17 4.7 TEST RESULTS - 30 MHZ TO 1000 MHZ 17 5 . FREQUENCY TOLERANCE 18 5.1 LIMIT 18 5.2 TEST PROCEDURE 18 5.3 DEVIATION FROM STANDARD 18 5.4 TEST SETUP 18 5.5 EUT OPERATION CONDITIONS 18 5.6 TEST RESULTS 18 6 . BANDWIDTH TEST 19 6.1 LIMIT 19 Report No.: FC022022-6545RF0 Page 4 of 38 Table of Contents Page 6.2 TEST PROCEDURE 19 6.3 DEVIATION FROM STANDARD 19 6.4 TEST SETUP 19 6.5 EUT OPERATION CONDITIONS 19 6.6 TEST RESULTS 19 7 . MEASUREMENT INSTRUMENTS LIST 20 8 . EUT TEST PHOTO 21 APPENDIX A - AC POWER LINE CONDUCTED EMISSIONS 24 APPENDIX B - RADIATED EMISSION - 9 KHZ TO 30 MHZ 27 APPENDIX C - RADIATED EMISSION - 30 MHZ TO 1000 MHZ 32 APPENDIX D - FREQUENCY TOLERANCE 35 APPENDIX E - BANDWIDTH 37 Report No.: FC022022-6545RF0 Page 5 of 38 REPORT ISSUED HISTORY Report No. Version Description Issued Date Note FCC022022-6545RF0 V1.0 Original Report. Jan. 12, 2023 Valid Report No.: FC022022-6545RF0 Page 6 of 38 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standard(s): FCC CFR Title 47, Part 15, Subpart C Standard(s) Section Test Item Test Result Judgment Remark 15.207 AC Power Line Conducted Emissions APPENDIX A PASS ------ 15.225(a)-(d) 15.205(a) 15.209(a) Radiated Emission APPENDIX B APPENDIX C PASS ------ 15.225(e) Frequency Tolerance APPENDIX D PASS ------ 15.215(c) Bandwidth APPENDIX E PASS ------ 15.203 Antenna Requirement ------ PASS Note(2) Note: (1) “N/A” denotes test is not applicable in this test report (2) The device what use a permanently attached antenna were considered sufficient to comply with the provisions of 15.203. Report No.: FC022022-6545RF0 Page 7 of 38 1.1 TEST FACILITY Company: Beijing TIRT Technology Service Co.,Ltd Shenzhen Address: 101, 3 # Factory Building, Gongjin Electronics Shatin Community, Kengzi Street, Pingshan District, Shenzhen, China CNAS Registration Number: CNAS L14158 A2LA Registration Number: 6049.01 FCC Accredited Lab. Designation Number: CN1309 FCC Test Firm Registration Number: 825524 Telephone: +86-0755-27087573 1.2 MEASUREMENT UNCERTAINTY ISO/IEC 17025 requires that an estimate of the measurement uncertainties associated with the emissions test results be included in the report. The measurement uncertainties given below are based on a 95% confidence level (based on a coverage factor (k=2)) The TIRT measurement uncertainty as below table: Uncertainty Parameter Uncertainty Occupied Channel Bandwidth ±142.12kHz RF power conducted ±0.74dB RF power radiated ±3.25dB Spurious emissions, conducted (9kHz～40GHz) ±1.78dB Spurious emissions, radiated (9kHz～30MHz) ±2.8dB Spurious emissions, radiated (30MHz～1GHz) ±4.6dB Spurious emissions, radiated (1GHz ~ 18GHz) ±4.9dB Spurious emissions, radiated (18GHz ~ 40GHz) ±5.54dB Conduction Emissions(150kHz~30MHz) ±3.1dB Humidity ±4.6% Temperature ±0.7°C Time ±1.25% Note: Unless specifically mentioned, the uncertainty of measurement has not been taken into account to declare the compliance or non-compliance to the specification. Report No.: FC022022-6545RF0 Page 8 of 38 1.3 TEST ENVIRONMENT CONDITIONS Test Item Temperature Humidity Test Voltage Tested By AC Power Line Conducted Emissions 24°C 54% AC 120V/60Hz Stone Tang Radiated Emissions-9kHz to 30MHz 24°C 54% AC 120V/60Hz Stone Tang Radiated Emissions-30MHz to 1000MHz 24°C 54% AC 120V/60Hz Stone Tang Frequency Tolerance Normal & Extreme 50% Normal & Extreme Stone Tang Bandwidth 24°C 55% AC 120V/60Hz Stone Tang Report No.: FC022022-6545RF0 Page 9 of 38 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT Equipment Module Brand Name -- Test Model SRT.NFC.01 Series Model N/A Model Difference(s) N/A Power Source 5V Power Rating 1.5W Operation Frequency 13.56 MHz Antenna Type PCB Host: Interactive Intelligent Panel TB65GA, TB75GA, TB86GA, OTS-PCAP65V3T1, OTS-PCAP75V3T1, OTS-PCAP86V3T1. The SRT.NFC.01 module will be p…

Text truncated - open the document above for the full version.

QR-ZZPJ-052 版权CVTE所有，本文档内容属商业机密。未经允许，任何组织或个人不得以任何形式复制和传播。 SPECIFICATION Suppliername ： GuangzhouShikunElectronicTechnologyCompany Limited Materialname ： Antenna SpecificationVersion ： A0 CVTEacknowledgementcolumnSupplieracknowledgementcolumn Quality Department Researchand Development Safety Regulations ApprovalExamineFormulate Address：No.192,KezhuRoad,Science City,GuangzhouEconomicand TechnologicalDevelopmentZone Address：CVTEThirdIndustrialPark,No. 6LiankunRoad,HuangpuDistrict, Guangzhou Telephone：020-82075661Telephone：020-82086168 Fax：020-32085197Fax：020-82075579 广州视琨电子科技有限公司 GuangzhouShikunElectronicTechnologyCompanyLimited 版权 CVTE 所有，本文档内容属商业机密。未经允许，任何组织或个人不得以任何形式复制和传播。 ConfidentialityLevel:Confidential SPECIFICATION MODEL: SRT.NFC.01 SalesTerritory:Globe DocumentEncoding:22111542 ApprovedbyShikun CheckedbyHWApprovedbyDC Pleasesendtheoriginalbacktousafteryouhaveapprovedandsigned. Approvedbycustomer CommentsApprovedbyCompany’sseal Customer’sName: 版权 CVTE 所有，本文档内容属商业机密。未经允许，任何组织或个人不得以任何形式复制和传播。 REVISIONHISTORY VERSIONDATEBOARDIDPAGEDESCRIPTIONAUTHOR V02022.11.15 SRT.NFC.01 B22291 AllFirstIssued.Lucia 版权 CVTE 所有，本文档内容属商业机密。未经允许，任何组织或个人不得以任何形式复制和传播。 Content 1.Coildiagram.....................................................................................1 2.DIMENSION......................................................................................1 3.SCHEMATICDIAGRAM........................................................................1 4.WindingSpecification：......................................................................2 SRT.NFC.01 QR-ZZPJ-017A 版权CVTE所有，本文档内容属商业机密。未经允许，任何组织或个人不得以任何形式复制和传播。 1 1.Coildiagram Picturesareforreferenceonly,specifictoprevailinkind. 2.DIMENSION Length：1003±5mil Width：661.5±5mil 3.SCHEMATICDIAGRAM SRT.NFC.01 QR-ZZPJ-017A 版权CVTE所有，本文档内容属商业机密。未经允许，任何组织或个人不得以任何形式复制和传播。 2 4.WindingSpecification ： NOTERMINALWIRFTumsWindingDirection 1SF20mil4TsCW

Report No.: FC022022-6545RF0 Page 21 of 38 8. EUT TEST PHOTO AC Power Line Conducted Emissions Test Photos Report No.: FC022022-6545RF0 Page 22 of 38 Radiated Emissions Test Photos 9 kHz to 30 MHz Report No.: FC022022-6545RF0 Page 23 of 38 Radiated Emissions Test Photos 30 MHz to 1000 MHz