2AFG6-SM01Wireless Screen Mirroring

2. Operation Frequency : 2432MHz&,5180 MHz Safety Warnings and Precautions Before using and operating this device, please read thoroughly and comply with the following precautions in order to prevent accidents or mal-operations. Operating Environment Do not charge or use the device in dusty or wet conditions, to prevent internal circuit failure. Keep the device away from heat sources such as an electric heater. Safety Precaution for Children This device and its parts may contain some small components, so keep the product out of reach of children to prevent accidents. Water Precaution This device is not water-resistant. Keep it dry. Maintenance Please contact professional service personnel for maintenance services. Do not insert any sharp or pointed object into the device. Prevent the device from falls and collisions with other objects, which may cause damages. 1. Intellectual property right statement: The hardware design and software of this product are covered by the patents. Anyone who reproduces this product or the content of the instruction without the authorization of the Company shall assume legal liabilities. 2. This instruction is provided for reference onl y , and the functions shown in the manual may di f fer from the actual functions of the product the customers actually purchase and receive. 3. The picture is for reference only. Please subject to the actual product. The Company reserves the rights to improve and change the appearance and design of the product without notice. Wireless Transmitter Operating Instruction Connection Wireless transmitterUSB receiver(optional) Step 1: First time use: Connect the transmitter and receiver to the USB ports on your interactive intelligent panel display for pairing (after then, there is no need to pair again). Step 2: After pairing, connect the transmitter to a USB port on your PC; click to run the Screen Mirroring Software (this is required for the first time use; after then there is no need to operate again). Step 3: Press the button on the transmitter by following the prompts displayed on your PC to implement screen mirroring. Basic Troubleshooting When the systems cannot get connected, please troubleshoot as follows: 1. Check that the Screen Mirroring Software runs properly on your PC. 2. Check that the receiver is correctly connected to the interactive intelligent panel display. 3. Pair the screen mirroring devices again and restart the interactive intelligent panel display. Features 1. Mirror your PC's desktop to your interactive intelligent panel display by connecting the transmitter to your PC and running the Screen Mirroring Software. 2. Support synchronization of audio and video. 3. Multiple transmitters are in a ready state (support a maximum of 8 transmitters); quickly switch by pressing the button on the transmitter. 4. Extended screen: The interactive intelligent panel display will be a extended screen of your PC for contents presentation. 5. Enable touch screen: The Enable Touch Screen allows you to control your PC by touching the screen, to implement bidirectional interactions. Indicators Status Descriptions 1. Blinking: The transmitter is connecting to the interactive intelligent 2. Steady on: The transmitter is connected to the interactive intelligent panel display and the screening mirroring is set up. 3. Low brightness: Mirroring Key Specifications 1. Operating systems supported: Win7/Win8/Win8.1/MacOS 3. T ransmission delay: < 120 ms 4. Input power: 5 V -DC 5. Overall power consumption: 2.5 W 6. Overall dimensions ( L x W x D): 77 mm x 178.7 mm x 21.3 mm Packing List Wireless transmitter —— 1 pc USB receiver —— 1 pc (optional) Operating instruction —— 1 pc panel display. The device for operation in the warning： This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. RF Exposure Statement: FCC RF Radiation Exposure and SAR Statements SAR Statement The Wireless Screen Mirroring has been tested for body-worn Specific Absorption Rate (SAR) compliance. The FCC has established detailed SAR requirements and has established that these requirements. RF Exposure Information The radio module has been evaluated under FCC Bulletin OET 65C (01-01) and found to be compliant to the requirements as set forth in CFR 47 Sections, 2.1093, and 15.247 (b) (4) addressing RF Exposure from radio frequency devices. This model meets the applicable government requirements for exposure to radio frequency waves. The highest SAR level measured for this device was 0.085 W/kg. 5180 MHz is only for indoor use to reduce the potenti…

Text truncated - open the document above for the full version.

Guangzhou Shirui Electronics Co.,Ltd. Date: 2015-09-22 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD FCC ID: 2AFG6-SM01 To Whom It May Concern: This letter is to ascertain that Guangzhou Shirui Electronics Co.,Ltd. Wireless Screen Mirroring Model Namer : SM01,SM02,SM03,SM04,SM05,SM06,SM07,SM08,SM09 has been the units used for conducting FCC compliance testing, the DoC part will be tested by FCC recognized test lab. If you have any question or concerns, pls. contact us. Sincerely, Signature Sarah Sun /Engineer E-mail: [email protected] Phone: +86-13640798230 Fax: +86-20-82086168 Address: 192 Kezhu Road, Scientech Park, Guangzhou Economic Technology Development District, Guangzhou,Guangdong,China

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 5.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (obsolete) 3.0 4.0 May-23-2014 Added FCC ID field (current) 4.0 5.0 Sept 16 2014 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 5.0 Guangzhou Shirui Electronics Co.,Ltd. 2015-09-22 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, Guangzhou Shirui Electronics Co.,Ltd.hereby authorize SIEMIC, Inc. to act as a Certification Body for certifying for the following project(s): Product name: Wireless Screen Mirroring Model Number: SM01,SM02,SM03,SM04,SM05,SM06,SM07,SM08,SM09 FCC ID: 2AFG6-SM01 Sincerely, Signature Sarah Sun /Engineer E-mail: [email protected] Phone: +86-13640798230 Fax: +86-20-82086168 Address: 192 Kezhu Road, Scientech Park, Guangzhou Economic Technology Development District, Guangzhou,Guangdong,China

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 4.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (obsolete) 2.0 3.0 Jan-31-2012 Added IC confidentiality letter form (current) 3.0 4.0 March-26-2015 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 4.0 Guangzhou Shirui Electronics Co.,Ltd. 2015-09-22 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: 2AFG6-SM01 We hereby request confidential treatment of information accompanying this application as outlined below: - Block Diagram - Schematics - Operational Description - The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature : Client’s name & title : Sarah Sun Contact information / address: 192 Kezhu Road, Scientech Park, Guangzhou Economic Technology Development District, Guangzhou,Guangdong,China

Guangzhou Shirui Electronics Co.,Ltd. . Family models declaration letter. 2015-09-22 We Guangzhou Shirui Electronics Co.,Ltd. . Of 192 Kezhu Road, Scientech Park, Guangzhou Economic Technology Development District, Guangzhou,Guangdong,China Product: Wireless Screen Mirroring FCC ID: 2AFG6-SM01 Model Name: SM01,SM02,SM03,SM04,SM05,SM06,SM07,SM08,SM09 These models are identical in circuitry and electrical, mechanical and physical construction; the only differences are the silk-screen, color and model no., and not influential with the products' feature of safety and EMC for trading purpose. Unless otherwise stated. Thanks Sincerely, Signature Sarah Sun /Engineer E-mail: [email protected] Phone: +86-13640798230 Fax: +86-20-82086168 Address: 192 Kezhu Road, Scientech Park, Guangzhou Economic Technology Development District, Guangzhou,Guangdong,China

Label Location Proposed Label Location on EUT

          

TRF No.: FCC SAR/A Page 1 of 44 Report No.: ES150722283E Ver.1.0 Access to the World SAR TEST REPORT For Wireless Screen Mirroring Model No.: SM01,SM02,SM03,SM04,SM05,SM06,SM07,SM08,SM09 FCC ID: 2AFG6-SM01 Trademark: seewo REPORT NO.: ES150722283E ISSUE DATE: September 11, 2015 Prepared for Guangzhou Shirui Electronics Co.,Ltd 192 Kezhu Road, Scientech Park, Guangzhou Economic Technology Development District, Guangzhou,Guangdong,China Prepared by SHENZHEN EMTEK CO., LTD. Bldg 69, Majialong Industry Zone, Nanshan District, Shenzhen, Guangdong, China TEL: 86-755-26954280 FAX: 86-755-26954282 TRF No.: FCC SAR/A Page 2 of 44 Report No.: ES150722283E Ver.1.0 Access to the World Table of Contents 1 TEST RESULT CERTIFICATION ................................................................................................................................. 3 2 EUT TECHNICAL DESCRIPTION .............................................................................................................................. 4 3 STATEMENT OF COMPLIANCE ................................................................................................................................ 6 4 AUXILIARY EQUIPMENT DETAILS ......................................................................................................................... 6 5 TEST FACILITY ............................................................................................................................................................. 6 6 EUT ANTENNA LOCATIONS ...................................................................................................................................... 7 7 GUIDANCE STANDARD .............................................................................................................................................. 8 8 RF EXPOSURE ............................................................................................................................................................... 9 8.1 LIMITS ................................................................................................................................................................ 9 8.2 EVALUATION .................................................................................................................................................... 9 8.3 MAXIMUM TUNE-UP LIMIT ........................................................................................................................ 10 9 SPECIFIC ABSORPTION RATE (SAR)..................................................................................................................... 11 9.1 INTRODUCTION ............................................................................................................................................. 11 9.2 SAR DEFINITION ............................................................................................................................................ 11 10 SAR MEASUREMENTS SYSTEM CONFIGURATION ......................................................................................... 12 10.1 SAR MEASUREMENT SET-UP ..................................................................................................................... 12 10.2 DASY5 E-FIELD PROBE SYSTEM ............................................................................................................... 13 10.3 E-FIELD PROBE CALIBRATION .................................................................................................................. 14 10.4 OTHER TEST EQUIPMENT ........................................................................................................................... 14 10.5 SCANNING PROCEDURE ............................................................................................................................. 17 10.6 DATA STORAGE AND EVALUATION ......................................................................................................... 19 10.7 TISSUE-EQUIVALENT LIQUID.................................................................................................................... 21 10.8 SYSTEM CHECK ............................................................................................................................................. 22 11 MEASUREMENT PROCEDURES ............................................................................................................................. 28 11.1 GENERAL DESCRIPTION OF TEST PROCEDURES ................................................................................ 28 11.2 MEASUREMENT VARIABILITY.................................................................................................................. 28 11.3 TEST POSITIONS REQUIREMENTS ...................................................................................................................... 28 11.4 TEST RESULTS ................................................................................................................................................ 32 12 700MHZ TO 3GHZ MEASUREMENT UNCERTAINTY ........................................................................................ 41 13 MAIN TEST INSTRUMENTS..................................................................................................................................... 44 TRF No.: FCC SAR/A Page 3 of 44 Report No.: ES150722283E Ver.1.0 Access to the World 1 TEST RESULT CERTIFICATION Applicant: Guangzhou Shirui Electronics Co.,Ltd 192 Kezhu Road, Scientech Park, Guangzhou Economic Technology Development District, Guangzhou,Guangdong,China Manufacturer: Guangzhou Shirui Electronics Co.,Ltd 192 Kezhu Road, Scientech Park, Guangzhou Economic Technology Development District, Guangzhou,Guangdong,China Product Description: Wireless Screen Mirroring Model Number: SM01,SM02,SM03,SM04,SM05,SM06,SM07,SM08,SM09 File Number: ES150722283E Date of Test: July 22, 2015 to September 11, 2015 Measurement Procedure Used: …

Text truncated - open the document above for the full version.

TRF No.: FCC 15.407/A Page 1 of 35 Report No.: ES150722284E2 Ver.1.0 Access to the World FCC 47 CFR PART 15 SUBPART E CERTIFICATION TEST REPORT For Wireless Screen Mirroring MODEL No.: SM01,SM02,SM03,SM04,SM05,SM06,SM07,SM08,SM09 FCC ID: 2AFG6-SM01 Trade Mark: seewo REPORT NO.: ES150722284E2 ISSUE DATE: August 7, 2015 Prepared for Guangzhou Shirui Electronics Co.,Ltd . 192 Kezhu Road, Scientech Park, Guangzhou Economic Technology Development District, Guangzhou,Guangdong,China Prepared by SHENZHEN EMTEK CO., LTD Bldg 69, Majialong Industry Zone, Nanshan District, Shenzhen, Guangdong, China TEL: 86-755-26954280 FAX: 86-755-26954282 TRF No.: FCC 15.407/A Page 2 of 35 Report No.: ES150722284E2 Ver.1.0 Access to the World 1 TEST RESULT CERTIFICATION Applicant: Guangzhou Shirui Electronics Co.,Ltd . 192 Kezhu Road, Scientech Park, Guangzhou Economic Technology Development District, Guangzhou,Guangdong,China Manufacturer: Guangzhou Shirui Electronics Co.,Ltd . 192 Kezhu Road, Scientech Park, Guangzhou Economic Technology Development District, Guangzhou,Guangdong,China Product Description: Wireless Screen Mirroring Model Number: SM01,SM02,SM03,SM04,SM05,SM06,SM07,SM08,SM09 File Number: ES150722284E2 Date of Test: July 22, 2015 to August 7, 2015 Measurement Procedure Used: APPLICABLE STANDARDS STANDARD TEST RESULT FCC 47 CFR Part 2, Subpart J FCC 47 CFR Part 15, Subpart E PASS The above equipment was tested by SHENZHEN EMTEK CO., LTD. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10 (2013) and the energy emitted by the sample EUT tested as described in this report is in compliance with the requirements of FCC Rules Part 2 and Part 15.407 The test results of this report relate only to the tested sample identified in this report. Date of Test : July 22, 2015 to August 7, 2015 Prepared by : Andy Wei/Editor Reviewer : Jack Li/Supervisor Approve & Authorized Signer : Lisa Wang/Manager TRF No.: FCC 15.407/A Page 3 of 35 Report No.: ES150722284E2 Ver.1.0 Access to the World TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ...................................................................................................................... 2 2 EUT TECHNICAL DESCRIPTION .................................................................................................................... 4 3 SUMMARY OF TEST RESULT ........................................................................................................................... 5 4 TEST METHODOLOGY ...................................................................................................................................... 6 4.1 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................................. 6 4.2 MEASUREMENT EQUIPMENT USED ........................................................................................................ 6 4.3 DESCRIPTION OF TEST MODES ................................................................................................................. 7 5 FACILITIES AND ACCREDITATIONS ............................................................................................................. 8 5.1 FACILITIES..................................................................................................................................................... 8 5.2 LABORATORY ACCREDITATIONS AND LISTINGS ................................................................................. 8 6 TEST SYSTEM UNCERTAINTY ........................................................................................................................ 9 7 SETUP OF EQUIPMENT UNDER TEST ......................................................................................................... 10 7.1 RADIO FREQUENCY TEST SETUP ........................................................................................................... 10 7.2 RADIO FREQUENCY TEST SETUP ........................................................................................................... 10 7.3 CONDUCTED EMISSION TEST SETUP .................................................................................................... 12 7.4 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ..................................................................... 13 7.5 SUPPORT EQUIPMENT ............................................................................................................................... 13 8 TEST REQUIREMENTS .................................................................................................................................... 14 8.1 BANDWIDTH MEASUREMENT ................................................................................................................ 14 8.2 MAXIMUM CONDUCTED OUTPUT POWER ........................................................................................... 18 8.3 MAXIMUM PEAK POWER DENSITY ....................................................................................................... 20 8.4 FREQUENCY STABILITY ........................................................................................................................... 22 8.5 UNDESIRABLE RADIATED SPURIOUS EMISSION ................................................................................ 24 8.6 CONDUCTED EMISSION TEST ................................................................................................................. 30 8.7 ANTENNA APPLICATION .......................................................................................................................... 35 TRF No.: FCC 15.407/A Page 4 of 35 Report No.: ES150722284E2 Ver.1.0 Access to the World 2 EUT TECHNICAL DESCRIPTION 2.4G Technical information Characteristics Description Device Type Wireless Device Modulation OFDM Operating Frequency 2432MHz Transmit Power Max 16.70dBm Antenna Type Chip Antenna An…

Text truncated - open the document above for the full version.

Radiated Emission Test Conducted Measurement Photo