2AFG6-SP39GAI Stylus

GuangzhouShiruiElectronicsCo.,Ltd 192KeZhuRoad,ScientechPark,GuangzhouEconomic&Technology DevelopmentDistrict,Guangzhou,China AttestationStatements NotCoveredEntityApplicant&NotCoveredEquipment To:FederalCommunicationsCommissionDate:Sep.28,25 7435OaklandMillsRoad, Columbia,MD21046,USA Ref:InformationRequiredbySection2.911(d)(5)(i)&(ii) FCCID:2AFG6-SP39G GuangzhouShiruiElectronicsCo.,Ltd(“theapplicant”)certifiesthat,asofthedateofthefilingofthe application,theapplicantisnotidentifiedontheCoveredList,establishedpursuantto§1.50002of referencechapter,asanentityproducing“covered”communicationequipment.Theequipmentfor whichauthorizationissoughtisnot“covered”telecommunicationsequipmentandvideosurveillance equipmentproducedbyentitiesidentifiedontheCommission’sCoveredListthatprohibitedfrom receivinganequipmentauthorizationpursuanttosection§2.903oftheFCCrules. Sincerelyyours, PrintedName:SarahSun Title:RegulatoryEngineer Address:192KeZhuRoad,ScientechPark,GuangzhouEconomic&TechnologyDevelopmentDistrict, Guangzhou,China Tel.:+86-13640798230 Email:[email protected] ApplicantSignature m

GuangzhouShiruiElectronicsCo.,Ltd 192KeZhuRoad,ScientechPark,GuangzhouEconomic&Technology DevelopmentDistrict,Guangzhou,China 1|Page AttestationStatements To:FederalCommunicationsCommissionDate:Sep.28,25 7435OaklandMillsRoad, Columbia,MD21046,USA Subject:AttestationofCompliancewithFCCCoveredListSoftwareRequirements FCCID:2AFG6-SP39G ProductName:AIStylus Thisletterservesasanattestationthattheequipmentidentifiedabove☐is/☒isnot(selectone)"covered" softwareasdefinedundertheFederalCommunicationsCommission(FCC)CoveredListrequirements,as outlinedinFCC22-84andKDB986446. Specifically,theundersignedcertifiesthattheequipmentforwhichauthorizationissought: 1.Doesnotcontaincybersecurityoranti-virussoftwareproducedorprovidedbyKasperskyLab, Inc.oranyofitssuccessors,assignees,parents,subsidiaries,affiliates,oranyentitythathasrebranded orrelabeledsoftwareproducedbytheaforementionedentities. 2.Doesnothavethecapabilitytostore,run,ordeliveranysoftwareidentifiedontheFCCCoveredList, includingbutnotlimitedtocybersecurityandanti-virussoftware. Tosupportthisattestation,theappendixevaluationdocumentationhasbeenpreparedandisincludedinthe certificationfiling. Thisattestationisbasedonathoroughevaluationofthedevice'sdesign,functionality,andsoftware environment.Theundersignedaffirmsthattheinformationprovidedisaccurateandcompletetothebestof theirknowledge. Sincerelyyours, Applicant PrintedName:SarahSun Title:RegulatoryEngineer Address:192KeZhuRoad,ScientechPark,GuangzhouEconomic&TechnologyDevelopmentDistrict, Guangzhou,China Tel.:+86-13640798230 Email:[email protected] Signature: m GuangzhouShiruiElectronicsCo.,Ltd 192KeZhuRoad,ScientechPark,GuangzhouEconomic&Technology DevelopmentDistrict,Guangzhou,China 2|Page EvaluationregardingtotheCoveredListSoftware: Compliance Methodology EvaluationProcessResults Deviceis Inherent compliance ☒ TheChipset(s)usedislimitedtorun theCybersecurityoranti-virus software. Compliance ☒ TheMemoryusedislimitedtorunthe Cybersecurityoranti-virussoftware. Compliance ☒ Thereisstoragecapacitylimitationfor storeorinstalltheCybersecurityor anti-virussoftware. Compliance ☒ Operatingsystemusedislimitedto run,installordelivertheCybersecurity oranti-virussoftware. Compliance Deviceisnot Inherent compliance ☐ EvaluationBasedonSoftware BillofMaterials(SBoM) Seeattached“SBoM“ Note:TheSBoMcontentislimited tothescopeofcoveredlist software(e.g.antivirusand cybersecuritysoftware). ☐ EvaluationBasedonScanfor Softwareonthedevice ☐ EvaluationBasedonFilesystemscan ☐ EvaluationBasedonRunning softwarecheck

Guangzhou Shirui Electronics Co.,Ltd 192 Kezhu Road, Scientech Park, Guangzhou Economic＆Technology Development District, Guangzhou,China Guangzhou,China China Date: 2025-9-15 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AFG6-SP39G Grantee’s FRN: 0024773087 US Agent – Attestation Statement / Part 2.911(d)(7) [ Guangzhou Shirui Electronics Co.,Ltd ] certifies, that as of [2025-9-15], we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: 2AFG6-SP39G. [Guangzhou Shirui Electronics Co.,Ltd ], accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of [Guangzhou Shirui Electronics Co.,Ltd ] for FCC ID: 2AFG6-SP39G . Designated Agent Information: Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] Sincerely, Company:GuangzhouShiruiElectronics Co.,Ltd DesignatedAgent:FCCUSAgent,LLC CompanyRepresentative:SarahSunDesignatedAgentRepresentative:TimPayne Signature:Signature:

GuangzhouShiruiElectronicsCo.,Ltd 192KeZhuRoad,ScientechPark,GuangzhouEconomic&Technology DevelopmentDistrict,Guangzhou,China 2025-9-28 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Subject:ConfidentialityRequestfor:FCCID:2AFG6-SP39G PursuanttoSections0.457and0.459oftheCommission’sRules,weherebyrequestpermanent confidentialtreatmentoftheexhibitsaccompanyingthiscertificationapplicationasoutlinedbelow: BlockDiagram Schematics OperationalDescription Theaboveexhibitscontaintradesecretsand/orproprietaryinformationthatarenotpubliclyavailableand materialsthattheApplicanthasspentconsiderableeffortsindeveloping.Publicdisclosureofthesemay beharmfultotheApplicantandgiveanunfairadvantagetocompetitorsonthemarket. PursuanttoDA04-1705,theapplicantalsorequeststemporaryconfidentialtreatmentoftheexhibits outlinedbelowforaperiodof(upto180)daysfromthedateofequipmentauthorizationandpriorto marketingintheUnitedStatestopreventtheprematurereleaseofanysensitiveinformation.Applicantis awareoftheirresponsibilitytonotifyDERYCOMintheeventinformationregardingtheproductorthe productismadeavailabletothepublicbeforetherequestedperiodhasexpired.  UserManual InternalPhotos  ExternalPhotos TestSetupPhotos Sincerely, (Signature)： Title: Regulatory Engineer Address:192 KeZhu Road, Scientech Park, Guangzhou Economic &Technology Development District, Guangzhou, China Tel.: +86-13640798230 Email: [email protected]

GuangzhouShiruiElectronicsCo.,Ltd 192KeZhuRoad,ScientechPark,GuangzhouEconomic&Technology DevelopmentDistrict,Guangzhou,China 2025-9-28 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Subject:AgentAuthorizationforFCCID:2AFG6-SP39G I,theundersigned,herebyauthorize(GuangzhouJingceTestingTechnologyCo.,Ltd.)toactonour behalfinallmattersrelatingtothisapplicationforequipmentcertification. Anyactcarriedoutby(GuangzhouJingceTestingTechnologyCo.,Ltd.)shallhavethesameeffectas ourownandIacknowledgethatallresponsibilityforcomplyingwiththetermsandconditionsof certification,asspecifiedbyDERYCOMCERTIFICATIONSERVICES,INC.,stillresideswith(Guangzhou ShiruiElectronicsCo.,Ltd). WecertifythatwearenotsubjecttoadenialoffederalbenefitsthatincludesFCCbenefitspursuantto Section5301oftheAnti-DrugAbuseActof1988,21U.S.C.§862,andthatnopartytotheapplication,as definedin47CFR§1.2002(b),issubjecttoadenialoffederalbenefitsthatincludesFCCbenefits pursuanttothatsection. Sincerely, (Signature)： (Full name of contact person listed on FCC’s website)：Sarah Sun (Title)：Regulatory Engineer Tel: +86-13640798230 Fax: NA Email: [email protected]

54mm 45mm Product NameAl Stylus Product ModelSP39-G Input Power5V 0.5A P/N:001.003.0010225 AI Stylus FCC ID:2AFG6-SP39G Bluetooth Dongle FCC ID:2AFG6-DL01 ManufacturerGuangzhou Shirui Electronics Co., Ltd. Address192 Kezhu Road, Scientech Park, Guangzhou Economic & Technology Development District, Guangzhou,China S/N:TGSP39G001022556Y00001 Product NameBluetooth Dongle Product ModelDL01 Made in China The label is displayed on the User Manual and the outer packaging box.

Report No.: JCF250624101-007 LOP-FTR011 1.0 1 / 6 RF EXPOSURE REPORT Applicant:Guangzhou Shirui Electronics Co Ltd. Address: No. 192 KeZhu Road Science Park, Economic-Technological Development Area, Guangzhou, Guangdong, 510530, China Manufacturer:Guangzhou Shirui Electronics Co Ltd. Address: No. 192 KeZhu Road Science Park, Economic-Technological Development Area, Guangzhou, Guangdong, 510530, China Product Description:AI Stylus Brand Name:N/A Tested Model/HVIN:SP39-G FCC ID:2AFG6-SP39G Report No.:JCF250624101-007 Received Date:Jun. 24, 2025 Tested Date:Jun. 24, 2025 - Jan. 30, 2026 Issued Date:Jan. 30, 2026 Test Standards:KDB 447498 D01 General RF Exposure Guidance v06 Test Result:Pass Prepared By: Kennys Zhang/EngineerDate:Jan. 30, 2026 Reviewed By: Roger Li/EngineerDate:Jan. 30, 2026 Approved By: Talent Zhang/Engineer Date:Jan. 30, 2026 Note: The test results in this report apply exclusively to the tested model / sample. Without written approval of Guangzhou Jingce Testing Technology Co., Ltd. the test report shall not be reproduced except in full. Report No.: JCF250624101-007 LOP-FTR011 1.0 2 / 6 Report Revise Record Report VersionRevise TimeIssued DateValid VersionNotes ---/Jan. 30, 2026Original Report/ Report No.: JCF250624101-007 LOP-FTR011 1.0 3 / 6 Table of Contents 1. Test Report Declare.............................................................................................................................4 2. Equipment Under Test.........................................................................................................................5 2.1. Description of EUT........................................................................................................................... 5 2.2. Description of Available Antennas................................................................................................... 5 3. Test Laboratory....................................................................................................................................5 4. RF Exposure Measurement................................................................................................................ 6 4.1. Requirement.....................................................................................................................................6 4.2. Limits for Maximum Permissible Exposure (MPE)...........................................................................6 4.3. Conducted Power.............................................................................................................................6 5. RF Exposure Calculation.................................................................................................................... 6 Report No.: JCF250624101-007 LOP-FTR011 1.0 4 / 6 1. Test Report Declare Applicant: Guangzhou Shirui Electronics Co Ltd. Address: No. 192 KeZhu Road Science Park, Economic-Technological Development Area, Guangzhou, Guangdong, 510530, China Manufacturer: Guangzhou Shirui Electronics Co Ltd. Address: No. 192 KeZhu Road Science Park, Economic-Technological Development Area, Guangzhou, Guangdong, 510530, China Product Name AI Stylus Brand Name: N/A Model Name: SP39-G Difference Description: N/A We Declare: The equipment described above is tested by Guangzhou JingceTesting Technology Co., Ltd. and in the configuration tested the equipment complied with the standards specified above. The test results are contained in this test report and Guangzhou Jingce Testing Technology Co., Ltd. is assumed of full responsibility for the accuracy and completeness of these tests except as provided information by clients. Report No.: JCF250624101-007 LOP-FTR011 1.0 5 / 6 2. Equipment Under Test 2.1.Description ofEUT EUT* Name: AI Stylus Model Number: SP39-G EUT Function Description:Please refer to the user manual of this device Power Supply:5V⎓0.5A Sample No.:250624101-01-01 Hardware Version: N/A Software Version: N/A Radio Specification: Bluetooth V5.1 Operation Frequency:2402 MHz - 2480 MHz Modulation:GFSK Data Rate:1Mbps Antenna Type: FPC Antenna, MAX. Gain: -3.4dBi Product Type: ☑ Portable device ☐ Mobile device ☐ Fixed device Note 1: EUT is the ab. of equipment under test. Note 2: The antenna gain is declared by the customer and the laboratory is not responsible for the accuracy of the antenna gain. 2.2. Description of Available Antennas Test Mode Transmit and Receive Mode Description BLE1TX, 1RXANT 1 can be used as transmitting/receiving antenna. 3. Test Laboratory Guangzhou Jingce Testing Technology Co., Ltd. Add.: No.10, Hefeng No.1 street, Huangpu District, Guangzhou, Guangdong, People’s Republic of China Association for Laboratory Accreditation(A2LA). Certificate Number: 6594.03 FCC Designation Number: CN1381. Test Firm Registration Number: 486550 IC Test Firm Registration Number: 31808 Conformity Assessment Body identifier: CN0173 Report No.: JCF250624101-007 LOP-FTR011 1.0 6 / 6 4. RF Exposure Measurement 4.1.Requirement According to 447498 D01 General RF Exposure Guidance v06 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: f(GHz) is the RF channel transmit frequency in GHz Power and distance are roundedto the nearest mW and mm before calculation The result is rounded to one decimal place for comparison 4.2.Limits for Maximum Permissible Exposure (MPE) Band Channel Frequency (MHz)Limit (mW)Limit (dBm) BLE 2440 9.609.82 24809.539.79 [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 Limit = [3.0·(min. test separation distance, mm)] / [√f(GHz)] = (3*5)/ [√2.44(GHz)] = 9.60mW Limit = [3.0·(min. test separation distance, mm)] / [√f(GHz)] = (3*5)/ [√2.48(GHz)] = 9.53mW 4.3.Conducted Power Band Channel Frequency (MHz…

Text truncated - open the document above for the full version.

Specification Acceptance Certificate CUSTOMER: Shenzhen Taiguan Technology Co., Ltd. Product name: PCEA Specifications and Models: HT1947-SP39-ant Customer part number:1.07.04.00.00149 Haitong Material Number:B.1.01.L.0994 Customer Acknowledgement SectionHaitong Acknowledgement Column Admitting departmen t Purchasing department Quality Control Department Engineering R&D Department ApprovalAuditMake Signing Date StampStamp Inspect Result： □Accept □Reject Explanation: Contact: Admission Certificate Catalogue One, Cover Two,Table of Contents Three,2D Drawing Four , Fai Five , CPK Six , QC engineering drawing Seven , Reliability Test Report Eight , Electrical performance report Nine，ROHS/HF restricted substances component survey form Ten，Packaging ˖ ˖ 5(9˖ '5:,1*12˖ 6&$/(˖ 81,7˖ 3$*(˖ 6,=(˖ ':1˖ &+.'˖ $33'˖ 352'8&71$0(˖ DESCRIPTION DESIGE DATE 352-(&71$0(˖ THIS DOCUMENT IS PROPERTY OF HAITONG PRECCISION TECHNOLOGY.LT IS CAN NOT BE COPIED,UPDATED AND TAKEN OUT COMPANY, UNLESS BE ALLOWED. LAB QE OQC IPQC IQC ⌘ກ ঻ߢ 㓴㻵 mm A4 Form number：HZHT-FM-PZ032 Version：A/0 DIMENSION TEXT REPORT Part name： PCEA DWG.No.： B.1.01.L.0994TYPE ： / Quantity ： 5 Client DWG.No： 1.07.04.00.00149Machine：/ Drawing Rev.： A Dept/Vendor： / Page ： 1 of 1 Environment：Temp. 22 °C Humidty ：55 %RH Test date：2023.6.19 Subject to be evaluated: Item class: SC = Significant Char. Full dimension KCC = Key Control Char. KC = Key Control Item NOR = Reference Item No.Spec. Control tolerance Class Instr.1#2#3#4#5# Result RemarkEngineering Comments upperlowerOK/NG 1145.86 0.05 0.05 NORc 145.86145.84145.85145.83145.86 OK 2110.30 0.05 0.05 NORc 110.29110.28110.27110.29110.28 OK 30.50 0.03 0.03 NORc 0.520.530.510.520.52 OK 410.70 0.03 0.03 NORc 10.6710.6710.6710.6710.67 OK 52.55 0.30 0.30 KCc 2.62.632.532.552.58 OK appearance 1. Plastic parts: no defects such as appearance shrinkage, air marks, welding marks, scratches, deformation, or flash edges; 2. FPC: no defects such as appearance impurities, discoloration spots, scratches, pressure marks, creases, oxidation of gold fingers, surface damage, etc.; 3.DS type: no defects such as missing carving, pinholes, laser carving breaks, laser carving deformation, scratches, oil stains, etc.; 4. Electplating type: no defects such as missing plating, overflow plating, scratches, pressure marks, deformation, etc OK/ Instruments：C A:Handy push-pull gauge B: Digimatic caliper C:Video measuring systemD:Salt spray tester E: Temperature and humidity F:Toolmaker's microscopeG: Network analyzerH: Pin gauge I: Knife ToolJ:Flat plateK:Soldering spot Tabulation: Yangdu Approved by: Yang Zhangmao CPK Report Form number：HZHT-FM-PZ051 Version：A/0 Product name PCEAsupplierHaitong Communication Material number 1.07.04.00.00149 VerifierYang Zhangmao Model number / inch/mm mm Well number / Material name / Version A Date 2023.06.19 Size number 1 nominal size 2.55 Plus tolerance 0.30 negative tolerance -0.30 Specification upper limit 2.85 Specification lower limit 2.25 1 2.53 2 2.58 3 2.57 4 2.55 5 2.60 6 2.62 7 2.61 8 2.59 9 2.58 10 2.55 11 2.51 12 2.55 13 2.68 14 2.53 15 2.50 16 2.53 17 2.52 18 2.57 19 2.64 20 2.62 21 2.61 22 2.63 23 2.53 24 2.67 25 2.58 26 2.70 27 2.65 28 2.53 29 2.62 30 2.59 31 2.60 32 2.63 33 2.55 34 2.62 35 2.58 MAX.2.70 MIN.2.50 AVERAGE2.59 STDEV0.05 CP1.99 Cpk1.75 measuring toolTwo-dimensional plane/2D Approved by: Yang Zhangmao Tabulation: Yangdu Zhejiang Haitong Communication Electronics Co., Ltd. QC engineering drawing and quality control plan table Product series PCEA Document number171028-01 Main contact person Zeng QingpingTelephone0752-5319982 MakeauditApproval Cover all processes LDS; electroplating; pasting of auxiliary materials; inspection and packaging Core group Zeng Qingping, Yang Zhangmao, Qiao Yapeng, Zhu Qunying, Wang Hao, Hou Lij Process state □Sample □trial production ■ mass production Date of completion 2023/6/25Revision date2023/6/25VersionV.A Yang Zhangmao Zeng Qingping Zhu Siyu Flowchart N O Project name control mode Characteristics Special character istics classific ation Management method (computing, measuring technology) Abnormal handling (response plan) NO Managemen t (process) character istics Checklist items Management specifications (product/process specifications/tol erances) Confirm ation method Check frequ ency inspecti on quantity Targetbearer Princ ipal disposa l Record Related criteria Note 01 Temporar y material collecti on Weigh on the electronic scale 01-1 Product name; Quantity appearance; weight Raw materials packaging is undamaged, not damp. Packaging requirements meet the specifications. Weight meets the eyesigh t Batch /lot Spot check a box 100% Raw material warehouse Super visor return Delivery note Warehouse managemen t system 02 Incoming inspecti on Calipers; Image measuring instrument to measure dimensions; Constant temperature test; Salt spray test. 02-1 Appearance , function and size Appearance; material; resistance to high temperature and humidity; corrosion resistance. Related quality characteristics conform to the inspection specifications. Visual measure ment Batch /lot Sampling accordin g to GB/T2828 .1-2012 one-time sampling standard Incomin g materia l batch pass rate ≥ 95% IQC Quali ty manag er return; special purchas e Delivery Inspection Form Incoming Material Inspection Record Nonconformin Incoming Inspectio n Specifica tion 03 Stocking ; custody Hygrometer measures ambient temperature 03-1 Product name; Quantity Appearance; weight Temperature; humidity Raw materials packaging is undamaged and not damp. Packaging requirements meet the specifications. Weight matches the delivery note. Temperature: 15°C ～0°C; Relative Visual measure ment Minim um packa ging Full inspecti on 100%com plies with storage conditi ons Raw material warehouse Super visor correct ion Stock-in note; Temperature and humidity record sheet 04Pick upeyesight04-1 Product name; Quantity Product name, quantity The materials taken are consistent with the BOM and order…

Text truncated - open the document above for the full version.

Report No.: JCF250624101-005 LOP-FTR016 1.01 / 46 FCC CERTIFICATION TEST REPORT Applicant:Guangzhou Shirui Electronics Co Ltd. Address: No. 192 KeZhu Road Science Park, Economic-Technological Development Area, Guangzhou, Guangdong, 510530, China Manufacturer:Guangzhou Shirui Electronics Co Ltd. Address: No. 192 KeZhu Road Science Park, Economic-Technological Development Area, Guangzhou, Guangdong, 510530, China Product Description:AI Stylus Brand Name:N/A Tested Model:SP39-G FCC ID:2AFG6-SP39G Report No.:JCF250624101-005 Received Date:Jun. 24, 2025 Tested Date:Jun. 24, 2025 - Jan. 30, 2026 Issued Date:Jan. 30, 2026 Test Standards:FCC Rules and Regulations Part 15 Subpart C, Test Procedure:ANSI C63.10-2020 Test Result:Pass Prepared By: Kennys Zhang/EngineerDate:Jan. 30, 2026 Reviewed By: Roger Li/Engineer Date:Jan. 30, 2026 Approved By: Talent Zhang/EngineerDate:Jan. 30, 2026 Note: The test results in this report apply exclusively to the tested model / sample. Without written approval of Guangzhou Jingce Testing Technology Co., Ltd. the test report shall not be reproduced except in full. Report No.: JCF250624101-005 LOP-FTR016 1.0 2 / 46 Report Revise Record Report VersionRevise TimeIssued DateValid VersionNotes ---/Jan. 30, 2026Original Report/ Report No.: JCF250624101-005 LOP-FTR016 1.0 3 / 46 TABLE OF CONTENTS 1. Test Report Declare...............................................................................................................................5 2. Summary of Test Results.....................................................................................................................6 3. Test Laboratory..................................................................................................................................... 6 4. Equipment Under Test..........................................................................................................................7 4.1. Description of EUT........................................................................................................................... 7 4.2. Channel List......................................................................................................................................7 4.3. Test Channel Configuration..............................................................................................................7 4.4. Test environment conditions............................................................................................................ 8 4.5. The Worse Case Power Setting Parameter.....................................................................................8 4.6. Description of Available Antennas................................................................................................... 8 5. Description of Test Setup.....................................................................................................................8 5.1. Accessory.........................................................................................................................................8 5.2. Support Equipment...........................................................................................................................8 5.3. Test Setup........................................................................................................................................ 8 5.4. Setup Diagram for Tests.................................................................................................................. 8 6. Measurement Uncertainty.................................................................................................................... 9 7. Measuring Instrument and Software Used.........................................................................................9 8. On Time and Duty Cycle.....................................................................................................................11 8.1. Block diagram of test setup............................................................................................................11 8.2. Limits.............................................................................................................................................. 11 8.3. Procedure.......................................................................................................................................11 8.4. Results............................................................................................................................................11 8.5. Original test data............................................................................................................................ 12 9. 6 dB DTS Bandwidth...........................................................................................................................13 9.1. Block diagram of test setup............................................................................................................13 9.2. Limits.............................................................................................................................................. 13 9.3. Test Procedure...............................................................................................................................13 9.4. Results............................................................................................................................................13 9.5. Original test data............................................................................................................................ 14 10. Peak Conducted Output Power........................................................................................................16 10.1. Block diagram of test setup..........................................................................................................16 10.2. Limits...........................................................................................…

Text truncated - open the document above for the full version.