2AFH2GGBVFXTGOGROOVE BLUEVIBE FXT BLUETOOTH HEADSET

 BLUEVIBEFXTHi-fihands-freebluetoothheadphoneuser  Manual Hello,dearcustomer  Welcome for using our BLUEVIBE FXT  hi-fi hands-free bluetoothheadphone , Please read carefullytheusermanualbeforeuseittomakesureproperoperation.  ！Keepitawayfrom  water,don’timmerseheadphoneinanyliquid  ！Keepitawayfrom  heatresource ！Adjustthevolumetoproper,avoidtoharmyourhealthanddevice。 Function Spec introduction for BLUEVIBE FXT Hi-fi hands-free bluetooth headphone ------------------------------------------------------------------------------------------- 1. Bluetoothmode  Wireless bluetooth , can  receive the bluetooth audio transmission signals for distance within10meters.Wecanalsoreceive and control reversely bluetooth media player such as play,pause,  previousornextsongtrackforiphone,ipad(fewdevicescannotsupportreverse control).CallAnsweringformobilephone  /headphoneswitch,hi-ficalling,callqualityisclear, noecho. 2、Callhands-freefunction  Callansweringformobilephone/headphone,Hi-ficalling,callqualityisclear,noecho。 3、LineInInputfunction  Connecttheaudiocablewithline-inconnector,sothatyou can still listen music after the batteryrunsout. 4、Automaticre-connection,memoryplayfunction  Forthisfunction,canhelpyoutoreconnectyourbluetoothdevicewhichconnectedsuccessfully lasttime.Andmemoryplaythemusiccourse  beforeyouturnofflasttime. 5、MicroUSBportchargingfunction  MicroUSBforcharging，EasyandConvenient。 6、Lowpoweralarm,power  offfunction  Whenthepowerisnotenough,theheadphonehavelowpoweralarmfunctionandpower offfunctionautomatically  .Port / Button function explanation  1.Previoustrack/Volume“+”key  Pairing in  bluetooth connection status,shortpresschangetoprevious song,longpress(above2seconds),thevolumewillbelargergradually,whenitreachestothe maximumvolume,ithas  awarningsoundalarmfunctiontoremind.  2.  Nexttrack/Volume“-”key  Pairinginbluetoothconnectionstatus,short press change to  next song , long press (above 2 seconds), the volume will be smaller  gradually ,when it reaches to the minimumvolume,itwillentermutemode.  3.  Poweron/offkey/play/cause/handsfreekey Long press for power on /off ;When in play status ,short pressfor pause/play,whenthecalliscoming,shortpress  forcallanswering;Ifyoudo notwanttoanswerthecall,longpressfor2secondsforrefuse(blueandred indicatorisplacedbelowthekey) 4.LineinPort. 5.MicroUSBChargingPort Basic operation Explanation： 1. Longpressthepowerbutton,enterbluetoothmode,theheadphonewillmaketheindicated soundof “Du,Du,Du,Du”,longpressabout3secondscontinuallyuntilRedandbluelight flashalternately,Afterenteringpairingmode,  theheadphonewillmakeanindicated soundof“Du,Du”,  Afterthedevicesconnectnormally,theblueindicatorflashonce  every2seconds.Redandbluelightflashalternatelyshowsconnectunsuccessfully.The bluetoothdevicenamed“BLUEVIBEFXT” 2. Underbluetoothmode,whenthecalliscoming,shortpresspowerbuttonforcall answering.Duringconversation,shortpress  powerbuttonforhangingup.Whenthecall iscoming,ifyoudonotwanttoanswerthecall,longpressabout2-3secondsforrefuse. 3. Underbluetoothmode,Shortpress ① changetoprevioustrack  ,longpress ① toincrease thevolume  4. Underbluetothmode,shortpress ② changetonexttrack,longpress ② todecreasethe volume  5. Underanycondition,insertLineAudioinputcabletoLinemode  6. ConnectMicroUSBcablewithcomputerUSBportoradaptorforcharging,theredindicated light flash , the red indicated light become blue after the batteryisfull.Wesuggestto chargeunderpoweroffstatus. 7. Bluetoothadoptpoint-pointconnection,wecanonlyconnectforonedeviceforonetime. Pairingmodecannotbedeletedunderconnectionstatus,Itonlycanbedeletedininterrupt status.  8. Itisnotallowed  tooccurthesamebluetoothdeviceinthesamemediadeviceinbluetooth list.Otherwiseyoucannotfindanothersameorsimilar  named  bluetoothheadphone. 1. Product Specification  2. ProductDimension ：185mm（L）*165mm(W)*75mm(H)  3. ProductWeight ：About245G Headphone parameter: 1.SpeakerDiameter：40MM。  2.Impedance ：18Ω。 3.RatedaudioOutputpower：5mW。 4.Sensitivity：106±3DB。 5.PeakaudioOutputpower：≤10mW Bluetooth parameter： 1. FrequencyRange:2.4020-2.480GHZ; 2. Bluetoothspecification：BT4.0/Bluetoothv2.1+EDR 3. TransmissionPower:CLASS2 4. ReceivingSensitivity;-80dBm<0.1%BER; 5. Straightlinetransmissionrange： Above10meters; 6. Operationpowerconsumption ：≤30MA; Battery Parameter ： 1.  Batteryspec：Standardbattery：350MAHbuilt-in   2. EnduranceTime ：up to 6-8hours ( based on 50% voice volume) (if play high bit rate video , the play time will be shorter） 3.  Charging standard ：  AC 100v ～ 240v/50-60Hz ， Output 5v/300 ～ 500MA （ Must use internationalstandardcharger,orusecomputerUSBportforcharging) 4.  Charingtime ：About2-3hours(Dependsondifferentcurrent) Product packing list Headphone1pc LINE-INCable1pc  USBChargingcable1pc  UserManual1pc  ------------------- Attention & Remark 1. Select the mobile phone in mobile phone bluetooth settings , thenyoucanusethe hands-freefunction. 2. Theheadphone have bluetooth signal jamproof system  , can prevent signal from interference;Butunderhighfrequencyorferromagneticenvironment…

Text truncated - open the document above for the full version.

RWD INDUSRIAL CO., LTD 3F, Block 1, Chuangxinghong Industrial Zone, Dashuikeng, No.1398, Guanguang Rd, Guanlan, Bao’an District, Shenzhen, China DATE :2015-11-30 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent On our behalf, I appoint Kevin Yu of Shenzhen EBO Technology Co., Ltd. to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with RWD INDUSRIAL CO., LTD and 3F, Block 1, Chuangxinghong Industrial Zone, Dashuikeng, No.1398, Guanguang Rd, Guanlan, Bao’an District, Shenzhen, China Dated this / Day of 30/11/2015 / Agency agreement expiration date: 29/11/2016 By: Raincy Jin Signature Printed Title: Marketing Executive On behalf of : RWD INDUSRIAL CO., LTD Telephone: +86 13823348480

RWD INDUSRIAL CO., LTD 3F, Block 1, Chuangxinghong Industrial Zone, Dashuikeng, No.1398, Guanguang Rd, Guanlan, Bao’an District, Shenzhen, China DATE :2015-11-30 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AFH2GGBVFXT Product Name: GOGROOVE BLUEVIBE FXT BLUETOOTH HEADSET Request for Long-term Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission rules, we hereby request that the following documents be held confidential long term:  Block diagram  Schematics  Operational Description These documents contain detailed system and equipment description and related information about the product which RWD INDUSRIAL CO., LTD. considers to be proprietary, confidential, and a custom design and, otherwise would not release to the general public. Since this design is a basis from which future technological products will evolve, RWD INDUSRIAL CO., LTD. Considers this information to be of benefit to its competitors, and that the disclosure of information in these documents would give competitors an unfair advantage in the market Dated this / Day of 30/11/2015 / By: Raincy Jin Signature Printed Title: Marketing Executive On behalf of : RWD INDUSRIAL CO., LTD Telephone: +86 13823348480

Differences Declaration To whom concern, We, RWD INDUSRIAL CO., LTD hereby declares: The product model(s) BlueVIBE FEX, RWD-S8BT are identical in the PCB layout, interior structure and electrical circuits with the product model BlueVIBE FEX, the only differences are the model name for commercial purpose. Authorized signature: Position: Marketing Executive Date: 201511/30

External Photos of EUT Sample

FCCID:2AFH2GGBVFXT THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.OPERA TION IS SUBJECTTO THE FOLLOWING TWO CONDITIONS:(1)THIS DEVICE MAY NOT CAUSE HARMFULINTERFERENCE AND(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. 25 mm 9 mm Bluetooth FCC ID:2AFH2GGBVFXT 

Internal Photos of EUT Sample

RF Exposure evaluation According to KDB 447498 D01 General RF Exposure Guidance v05 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison eirp = pt x gt = (EXd) 2 /30 where: pt = transmitter output power in watts, gt = numeric gain of the transmitting antenna (unitless), E = electric field strength in V/m, --- 10 ((dBuV/m)/20) /10 6 d = measurement distance in meters (m)---3m So pt = (EXd) 2 /30 x gt Field strength = 95.19 dBuV/m @3m Ant gain 0dBi; so Ant numeric gain=1 So pt={[10 (95.19 /20) /10 6 x3] 2 /(30x1)}x1000mW = 0.9911 mW So ( 0.9911 mW/5mm)x √2.480 GHz = 0.3 <3 Then SAR evaluation is not required

Shenzhen EBO Technology Co., Ltd . 1-4F, Huafeng Science Park, Xin’an Sixth Road, 82 th District, Bao’an, Shenzhen, China. Telephone: +86-755-29451282, Fax: +86-755-22639141 Report No.: EBO1511079-E249 Page: 1 of 29 Authorized Signature: Kevin Yu Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the EBO product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of EBO International Electrical Approvals or testing done by EBO International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by EBO International Electrical Approvals in writing. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only FCC REPORT Applicant: RWD INDUSRIAL CO., LTD Address of Applicant: 3F, Block1, Chuangxinghong Industrial Zone, Dashuikeng, No1398 Guanguang Rd, Guanlan, Bao’an District, Shenzhen, China Equipment Under Test (EUT) Product Name: GOGROOVE BLUEVIBE FXT BLUETOOTH HEADSET Trade Mark: GOgroove Model No.: BlueVIBE FEX, RWD-S8BT FCC ID: 2AFH2GGBVFXT Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.249:2014 Date of sample receipt: November 21, 2015 Date of Test: November 21, 2015 To November 30, 2015 Date of report issued: November 30, 2015 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Shenzhen EBO T echnology Co., Ltd . Report No.: EBO1511079-E249 Page: 2 of 29 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.ebotek.cn 2 Version Version No. Date Description 00 November 30, 2015 Original Prepared By: Date: November 30, 2015 Project Engineer Check By: Date: November 30, 2015 Reviewer and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.ebotek.cn . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” Shenzhen EBO T echnology Co., Ltd . Report No.: EBO1511079-E249 Page: 3 of 29 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.ebotek.cn and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.ebotek.cn . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 3 Contents Page 1 COVER PAGE ...........................................................................................................................................1 2 VERSION..................................................................................................................................................2 3 CONTENTS..............................................................................................................................................3 4 TEST SUMMARY.....................................................................................................................................4 4.1 MEASUREMENT UNCERTAINTY............................................................................................................ 4 5 GENERAL INFORMATION...................................................................................................................... 5 5.1 CLIENT INFORMATION............................................................................................................…

Text truncated - open the document above for the full version.

Shenzhen EBO Technology Co., Ltd . 1-4F, Huafeng Science Park, Xin’an Sixth Road, 82 th District, Bao’an, Shenzhen, China. Telephone: +86-755-29451282, Fax: +86-755-22639141 Report No.: EBO1511079-E250 Page: 1 of 24 Authorized Signature: Kevin Yu Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the EBO product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of EBO International Electrical Approvals or testing done by EBO International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by EBO International Electrical Approvals in writing. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only FCC REPORT Applicant: RWD INDUSRIAL CO., LTD Address of Applicant: 3F, Block1, Chuangxinghong Industrial Zone, Dashuikeng, No1398 Guanguang Rd, Guanlan, Bao’an District, Shenzhen, China Equipment Under Test (EUT) Product Name: GOGROOVE BLUEVIBE FXT BLUETOOTH HEADSET Trade Mark: GOgroove Model No.: BlueVIBE FEX, RWD-S8BT FCC ID: 2AFH2GGBVFXT Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.249:2014 Date of sample receipt: November 21, 2015 Date of Test: November 21, 2015 To November 30, 2015 Date of report issued: November 30, 2015 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Shenzhen EBO Technology Co., Ltd . Report No.: EBO1511079-E250 Page: 2 of 24 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.ebotek.cn 2 Version Version No. Date Description 00 November 30, 2015 Original Prepared By: Date: November 30, 2015 Project Engineer Check By: Date: November 30, 2015 Reviewer and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.ebotek.cn. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” Shenzhen EBO Technology Co., Ltd . Report No.: EBO1511079-E250 Page: 3 of 24 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.ebotek.cn and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.ebotek.cn. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 3 Contents Page 1 COVER PAGE............................................................................................................................................ 1 2 VERSION..................................................................................................................................................2 3 CONTENTS..............................................................................................................................................3 4 TEST SUMMARY.....................................................................................................................................4 4.1 MEASUREMENT UNCERTAINTY............................................................................................................ 4 5 GENERAL INFORMATION...................................................................................................................... 5 5.1 CLIENT INFORMATION...............................................................................................................…

Text truncated - open the document above for the full version.

TEST SETUP PHOTOGRAPHS 1. Conducted Emission Test Setup 2. Radiated Emission Test Setup