2AFP2-LC993-in-1 Wireless Charger

M⬄ঞ঻Յவ֚਩ԭӳ аޢપ 2) ==    2)( 7.939<ͧ==2)  SS Q.`Q.`Q.`Q.` FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The FCC certification of this device refers to RF exposure testing performed in typical operating conditions, where a person is no closer than 20 centimeters from the device surface at all times, except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, the device is shown to fully comply with the FCC RF Exposure requirements of KDB 447498.

Page 1 of 4 FCC ID: 2AFP2-LC99 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. EUT Constructional Details External EUT Photo Photo 1 Photo 2 Page 2 of 4 FCC ID: 2AFP2-LC99 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 3 Photo 4 Page 3 of 4 FCC ID: 2AFP2-LC99 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 5 Photo 6 Page 4 of 4 FCC ID: 2AFP2-LC99 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 7 ---The End---

Label Size: L30mm *W 25mm 1. The label is silk-screen on the sample 3-in-1 Wireless Charger Model Name: LC99 FCC ID: 2AFP2-LC99 W L

Page 1 of 3 FCC ID: 2AFP2-LC99 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. EUT Constructional Details Internal EUT Photo Photo 1 Photo 2 Phone Coil Earphone Coil Watch Coil Page 2 of 3 FCC ID: 2AFP2-LC99 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 3 Photo 4 Page 3 of 3 FCC ID: 2AFP2-LC99 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 5 Photo 6 ------End------

Page 1 of 19 Report No.: AIT24042906W2 RF Exposure Evaluation Client Information: Applicant: Shenzhen Powerqi Technology Co.,Ltd. Applicant add.: Room 201, 302, 401 of A4 Building, Block A, Fangxing Science and Technology Park, No. 13 of Baonan Road, Longgang District, Shenzhen, China Manufacturer: Shenzhen Powerqi Technology Co.,Ltd. Manufacturer add.: Room 201, 302, 401 of A4 Building, Block A, Fangxing Science and Technology Park, No. 13 of Baonan Road, Longgang District, Shenzhen, China Product Information: Product Name: 3-in-1 Wireless Charger Model No.: LC99 Brand Name: Powerqi Test samples.:AIT24042906001 FCC ID: 2AFP2-LC99 Applicable standards: FCC CFR 47 PART 1, § 1.1310 KDB 680106 D01 Wireless Power Transfer v04 Prepared By: Dongguan Yaxu (AiT) Technology Limited No.22,Jinqianling 3rd Street,Jitigang,Huangjiang,Dongguan, Guangdong,China Tel.: +86-769-8202 0499 Fax.: +86-769-8202 0495 Date of Receipt: Apr. 29, 2024Date of Test: Apr. 29, 2024 ~ Mar. 11, 2024 Date of Issue: Mar. 11, 2024Test Result: Pass This device described above has been tested by Dongguan Yaxu (AiT) Technology Limited and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. Note: This report shall not be reproduced except in full, without the written approval of Dongguan Yaxu (AiT) Technology Limited, this document may be altered or revised by Dongguan Yaxu (AiT) Technology Limited, personal only, and shall be noted in the revision of the document. This test report must not be used by the client to claim product endorsement. Rviewed by: Approved by: Emiya Lin Simaba Huang Page 2 of 19 Report No.: AIT24042906W2 1 CONTENTS COVER PAGE Page 1CONTENTS2 2TEST FACILITY4 2.1 Deviation from standard4 2.2 Abnormalities from standard conditions4 2.3 Test Location4 3GENERAL INFORMATION5 4TEST METHODOLOGY6 4.1 Measuring Standard6 4.2 Requirements6 4.3 Limits6 4.4 Test Setup7 4.5 Test Procedure7 5Equipment Approval Considerations8 5.1 Description of the test mode9 5.2 Peripheral List9 5.3 Test Instruments list9 5.4 Duty Cycle:10 5.5 Test Result12 1.1 Test Setup photo16 Page 3 of 19 Report No.: AIT24042906W2 Revision History RevisionIssue DateRevisionsRevised By 00 Mar. 11, 2024 Initial IssueEder Zhan Page 4 of 19 Report No.: AIT24042906W2 2 TEST FACILITY The test facility is recognized, certified or accredited by the following organizations: CNAS- Registration No: L6177 Dongguan Yaxu (AiT) technology Limited is accredited to ISO/IEC 17025:2017 general Requirements for the competence of testing and calibration laboratories (CNAS-CL01 Accreditation Criteria for the competence of testing and calibration laboratories) on April 18, 2022 FCC-Registration No.: 703111 Designation Number: CN1313 Dongguan Yaxu (AiT) technology Limited has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. IC —Registration No.: 6819A CAB identifier: CN0122 The 3m Semi-anechoic chamber of Dongguan Yaxu (AiT) technology Limited has been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 6819A A2LA-Lab Cert. No.: 6317.01 Dongguan Yaxu (AiT) technology Limited has been accredited by A2LA for technical competence in the field of electrical testing, and proved to be in compliance with ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. 2.1 Deviation from standard None 2.2 Abnormalities from standard conditions None 2.3 Test Location Dongguan Yaxu (AiT) Technology Limited Address: No.22, Jinqianling 3rd Street, Jitigang, Huangjiang,Dongguan, Guangdong, China Tel.: +86-769-8202 0499 Fax.: +86-769-8202 0495 Page 5 of 19 Report No.: AIT24042906W2 3 GENERAL INFORMATION EUT Name:3-in-1 Wireless Charger Model No:LC99 Serial Model:N/A Test sample(s) ID:AIT24042906001 Sample(s) Status: Engineer sample Operation frequency: Coil1: For Phone: 113kHz-205kHz Coil2: For Earphone: 113kHz-205kHz Coil3: Watch: 300kHz-350kHz Modulation Technology:ASK Antenna Type:Coil1/Coil2/Coil3: Loop coil Antenna Antenna gain:Coil1/Coil2/Coil3: 0dBi Hardware version.:V10 Software version.:V1.0 Power supply: Input: 5V⎓3A,9V⎓2.22A,12V⎓1.67A Phone Output: 5W/7.5W/10W MAX Earphone Output: 5W Watch Output: 3W Model different:N/A Note: For a more detailed features description, please refer to the manufacturer’s specifications or the User's Manual. Page 6 of 19 Report No.: AIT24042906W2 4 TEST METHODOLOGY 4.1 Measuring Standard According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to §1.1310 and §2.1091 RF exposure is calculated. According KDB680106 D01: KDB 680106 D01 Wireless Power Transfer v04. 4.2 Requirements According to the item 3 of KDB 680106 D01v04: Inductive wireless power transfer applications that meet all of the following requirements are excluded from submitting an RF exposure evaluation. (1) Mobile Device and Portable Device Configurations (2) Equipment Authorization Procedures for Devices Operating at Frequencies Below 4 MHz (3) The aggregate H-field strengths anywhere at or beyond 15 cm surrounding the device, and 20 cm away from the top surface. 4.3 Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) Page 7 of 19 Report No.: AIT24042906W2 4.4 Test Setup 4.5 Test Procedure 1) The RF exposure test was performed in anechoic chamber. 2) The measurement probe was placed at test distance (15 cm from all sides…

Text truncated - open the document above for the full version.

Page 1 of 25 Report No.: AIT24042906W1 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. FCC TEST REPORT Client Information: Applicant: Shenzhen Powerqi Technology Co.,Ltd. Applicant add.: Room 201, 302, 401 of A4 Building, Block A, Fangxing Science and Technology Park, No. 13 of Baonan Road, Longgang District, Shenzhen, China Manufacturer: Shenzhen Powerqi Technology Co.,Ltd. Manufacturer add.: Room 201, 302, 401 of A4 Building, Block A, Fangxing Science and Technology Park, No. 13 of Baonan Road, Longgang District, Shenzhen, China Product Information: Product Name: 3-in-1 Wireless Charger Brand Name: Powerqi Model No.: LC99 FCC ID: 2AFP2-LC99 Applicable standards:FCC CFR Title 47 Part 15 Subpart C Prepared By: Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang,Dongguan, Guangdong, China Tel.: +86 0755-230967639 Fax.: +86 0755-230967639 Date of Receipt: Apr. 29, 2024Date of Test: Apr. 29, 2024 ~ May 11, 2024 Date of Issue: May 11, 2024Test Result: Pass This device described above has been tested by Dongguan Yaxu (AiT) Technology Limited and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. Note: This report shall not be reproduced except in full, without the written approval of Dongguan Yaxu (AiT) Technology Limited, this document may be altered or revised by Dongguan Yaxu (AiT) Technology Limited, personal only, and shall be noted in the revision of the document. This test report must not be used by the client to claim product endorsement. Rviewed by: Approved by: Emiya Lin Simaba Huang Page 2 of 25 Report No.: AIT24042906W1 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. 1 Contents Page COVER PAGE 1CONTENTS...........................................................................................................................................................2 2TEST SUMMARY..................................................................................................................................................5 2.1STATEMENT OF THE MEASUREMENT UNCERTAINTY .............................................................................................5 2.2MEASUREMENT UNCERTAINTY ...........................................................................................................................5 3TEST FACILITY ....................................................................................................................................................6 3.1DEVIATION FROM STANDARD ..............................................................................................................................6 3.2ABNORMALITIES FROM STANDARD CONDITIONS ...................................................................................................6 3.3TEST LOCATION ................................................................................................................................................6 4GENERAL INFORMATION ..................................................................................................................................7 4.1EUT TEST MODE ..............................................................................................................................................8 4.2DESCRIPTION OF TEST SETUP ............................................................................................................................8 4.3PERIPHERAL LIST ..............................................................................................................................................9 4.4EUT PERIPHERAL LIST ......................................................................................................................................9 5EQUIPMENTS LIST FOR ALL TEST ITEMS .....................................................................................................10 6CONDUCTED EMISSION TEST.........................................................................................................................11 6.1CONDUCTED EMISSION MEASUREMENT................................................................................................11 6.2POWER LINE CONDUCTED EMISSION LIMITS ...........................................................................................11 6.3TEST PROCEDURE .....................................................................................................................................11 6.4DEVIATION FROM TEST STANDARD.........................................................................................................11 6.5TEST SETUP ................................................................................................................................................12 6.6EUT OPERATING CONDITIONS .................................................................................................................12 6.7TEST RESULT .................................................................................................................................................13 7RADIATED EMISSION MEASUREMENT ..........................................................................................................15 7.1RADIATED EMISSION LIMITS .............................................................................................................................15 7.2ANECHOIC CHAMBER TEST SETUP DIAGRAM ....................................................................................................16 7.3TEST PROCEDURE ..........................................................................................................................................16 7.4DEVIATION FROM TEST STANDARD.......................................................................................…

Text truncated - open the document above for the full version.

Page1of4 东莞市金赞智能科技有限公司 DONGGUANKIMCHENINDUSTRYINTLLIMITED Address: 东莞市石碣镇西沙路 2 号 Tel ： 86-076986018114Fax ： 86-076986015646 Http://www.jzcoil.com文件编号FilNo:KC-JZ-09-008 东莞市金赞智能科技有限公司 产品规格书 PRODUCTSPECIFICATION 拟制 PREPAREDBY 跟单员 MERCHANDISER 工程审核 ENGINEER CHECKEDBY 制程审核 PRODUCTION CHECKDEDBY 批准 APPROVEDBY 王云帆 客户： CUSTOMER:____________________________________________________________________ 客户料号： CUSTP/N:____________________________________________________________________ 金赞料号： KCP/N:____________________________________________________________________ 产品型号：苹果手表线圈（带磁铁8.1uH)-线圈长13mm （14*21*0.08*24P*14TS*13MM) DESE: 日期：2023.7.27 DATE:____________________________________________________________________ 版本：A.1 VERSION:____________________________________________________________________ （客户承认受领印）ACCEPTANCESTAMP Pageof4 东莞市金赞智能科技有限公司 DONGGUANKIMCHENINDUSTRYINTLLIMITED Address:东莞市石碣镇西沙路2号Tel：86-076986018114Fax：86-076986015646 Http://www.jzcoil.com文件编号FilNo:KC-JZ-09-008 109.020 14*20.5*0.08*24P*14TS*13MM 拟制 PREPAREDBY 工程审核 ENGINEERCHECKEDBY 制程审核 PRODUCTIONCHECKEDBY 2 1.产品外形尺寸（OVERALLDIMENSIONSOFPRODUCTS): 版本 Rev. 变更前 BeforeChange 变更后内容 DESCRIPTION(ContentOrReasonForChanged) 日期 Date 修订者 Revisor A.0--新发行（InitialRelease）2023/4/1王云帆 A.1引线长度8+2/-0变更成13+2/-02023/7/27王云帆 Pageof4 东莞市金赞智能科技有限公司 DONGGUANKIMCHENINDUSTRYINTLLIMITED Address:东莞市石碣镇西沙路2号Tel：86-076986018114Fax：86-076986015646 Http://www.jzcoil.com文件编号FilNo:KC-JZ-09-008 109.020 14*20.5*0.08*24P*14TS*13MM 拟制 PREPAREDBY 工程审核 ENGINEERCHECKEDBY 制程审核 PRODUCTIONCHECKEDBY 3 单位 (Unit): 毫米 (mm) PS:1.C为磁外引线长度；2.H不含进线；3.线圈反贴；4.J不含离型纸 圈数 Turns 线径 WireDia. 绕线方式疏/密 Wdg.Type Spred/Close 绕线方向 Wdg.Direction 相交是/否 Intersect Yes/Not 线圈正/反贴 Coil Positive/AntiPaste 14TS 0.08*24P热风绞线 (HotAirstrandedWire) 密绕（Close） 逆时针 (Anticlockwise) 是(Yes)反贴(Anti-Paste) ABCDEFG 2±1 1-2 13+2/-014±0.521MAX7.5MAX7.8±0.5 HIJK L 1.05±0.052.5±0.22.85MAX25±1 2.2±0.1 Pageof4 东莞市金赞智能科技有限公司 DONGGUANKIMCHENINDUSTRYINTLLIMITED Address:东莞市石碣镇西沙路2号Tel：86-076986018114Fax：86-076986015646 Http://www.jzcoil.com文件编号FilNo:KC-JZ-09-008 109.020 14*20.5*0.08*24P*14TS*13MM 拟制 PREPAREDBY 工程审核 ENGINEERCHECKEDBY 制程审核 PRODUCTIONCHECKEDBY 4 所有材料要求合格ROHS标准 2.电气特性（ELECTRICALCHARACTERISTICS): 温度TEMPERATURE:25±10°C,湿度RELATIVEHUMIDITY:65±10% 序号 NO. 项目 ITEM 端子 TERMINAL 标准 SPECIFICATION 测试条件 TESTFREQUENCY 测试仪器 TESTEQUIPMENTS 1INDS-F线圈：4.9uH±10%1kHz/VLCZMETER1062 1INDS-F线圈加磁片：8.1uH±10%1kHz/VLCZMETER1062 3.材料清单（BILLOFMATERIAIS): 材料名称 Materialname 品名描述 Description 物料代码 MaterialCode 厂商代码 Vendorcode 线材0.08*24P热风绞线 JX-2U-F-0009 ZY 软磁片 G25±1*7.8*2.5±0.2H（有孔有槽） （小槽：5.2*2.0H大槽8.5*2.0H）磁片表面无Logo GCP-T-00206QT 3M背胶(灰色） 15*0.15H（无孔带耳朵）离型纸白底蓝字 SMJ-3M-00061 MLS 锡条环保无铅焊锡条 无铅高温锡条XC 强磁铁N487.5*2.2H（2800-3200GS)CT-T-0008YY

Page 1 of 2 FCC ID: 2AFP2-LC99 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Test Setup Photo DCD Conduction Radiation (9KHz-30MHz) Page 2 of 2 FCC ID: 2AFP2-LC99 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Radiation (30MHz-1000MHz) ------End------