2AFRV-FC-NT-01LED Net Lights
Shenzhen FeiCan Technology Co., Limited
Click to zoom
Application Details
- Equipment Class
- DTS - Digital Transmission System
- Date of Grant
- Sep 01, 2026
- Application Purpose
- Original Equipment
- Equipment Note
- LED Net Lights
- Frequency Range
- 2402.00000000 - 2480.00000000
- Country
- China
Documents & Files
Document Text
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Users Manual
***%FUBJMFEJOUSPEVDUJPOPG"11GVODUJPOT NJMMJPODPMPSTDBOCFQJDLFEVQ:PVDBOFEJUUIFDVSUBJOMJHIUDPMPSJOXIPMFTFDUJPO PSQPJOUQBJOU BOEBEKVTUUIFCSJHIUOFTT $PMPSGVM **$ERXW6HWWLQJV盚 *OUIFTFUUJOHJOUFSGBDF ZPVDBOTFUUIFDPMPSDBMJCSBUJPO IPSJ[POUBM珡JQ 5 IFSFBSFCVJMUJOMJHIUJOHF珟FDUT BOEBEKVTUBCMFTQFFEBOECSJHIUOFTT 琰& 珟FDUGVODUJPO $ MJDLώUPBEEUFYUPSCVJMUJOQBUUFSO:PVDBO$IBOHFUIFDPMPSPSCBTFDPMPSPGUIF UFYU*UBMTPBDIJFWFTVQBOEEPXO BSPVOE 珡JDLFS 珠YFEBOEPUIFSF珟FDUT 琰' POUGVODUJPO CVJMUJOEZOBNJDQBUUFSOBOETUBUJDQBUUFSOTFMFDUJPO DVSUBJOMBNQBDDPSEJOHUPUIF TFMFDUFEQBUUFSOEJTQMBZMJHIUJOHF珟FDU 琰( BMMFSZGVODUJPO $MJDL UPDSFBUFNVMUJQMFTDSFFOTUPHFOFSBUFEZOBNJDMJHIUJOHF珟FDUT 琰%*:GVODUJPO "OJNBUJPO 1JDUVSF $MJDL UPNBLF%*:BSCJUSBSZQBUUFSOTBOEUFYUT*UDBOBMTPBDIJFWFTVQBOEEPXO BSPVOE 珡JDLFS 珠YFEBOEPUIFSF珟FDUT$SFBUFUIFQFSGFDUBUNPTQIFSFGPSZPVS GBWPSJUFTQFDJBMPDDBTJPO .VTJD.PEF 4ZODISPOJ[BUJPOGVODUJPOPGMJHIUJOHBOENVTJDSIZUIN $MJDL"EE.VTJD *NQPSUBNVTJD珠MFPSJNQPSUJUGSPNUIFCVJMUJONVTJDMJCSBSZ .*$ 5IFMJHIUTDPMPSXJMMDIBOHFXJUIUIFTPVOESIZUINXIFOZPVSQIPOFNJDSPQIPOF DBUDIFTUIFTPVOE5IFNJDSPQIPOFTFOTJUJWJUZDBOCFBEKVTUFECZUIFTMJEFS5IFSFBSF UXPXBZTUPJOQVUUIFBVEJPTJHOBMPOUIFDPOUSPMMFS CVJMUJO"11NJDSPQIPOFBOE FYUFSOBMNJDSPQIPOF 'PSTPVOEDPOUSPMWFSTJPO -JHIUUJNFS 4NBSUMJHIUTBVUPNBUJDBMMZDPNFPOBOEP珟BUHJWFOUJNFTUISPVHIUIFUJNFS GVODUJPO琳DIPPTFZPVSGBWPSJUFF珟FDUBOEDPMPSUIFOTBWFJU FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Attestation Statements
Rev 1/26/2023 Shenzhen FeiCan Technology Co., Limited Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2026-08-24 FCC ID: 2AFRV-FC-NT-01 Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing Shenzhen FeiCan Technology Co., Limited certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Shenzhen FeiCan Technology Co., Limited certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing Shenzhen FeiCan Technology Co., Limited certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Applicant: Shenzhen FeiCan Technology Co., Limited Address: 3F, JBuilding, Longtianli Industrial Park, No.11, Zhangyi Road, Zhangge Community, Fucheng Street, Longhua District, Shenzhen, China Contact Person: Wendy Luo Tel.: 0755-66609352 Email: [email protected] Sincerely, Signature:
Attestation Statements
Attestation Statements Date: 2026-08-24 TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA RE: Attestation Statements Part 2.911(d)(7) request for(FCC ID: 2AFRV-FC-NT-01) Shenzhen FeiCan Technology Co., Limited, the undersigned, hereby authorize HOPEK CORPORATION INC to act as our designated agent for service of process, Shenzhen FeiCan Technology Co., Limited accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission- related proceeding involving the equipment. HOPEK CORPORATION INC accepts the responsibility to act as designated agent for service of process. Applicant Information： Company name: Shenzhen FeiCan Technology Co., Limited Contact Name: Wendy Luo Address: 3F, JBuilding, Longtianli Industrial Park, No.11, Zhangyi Road, Zhangge Community, Fucheng Street, Longhua District, Shenzhen, China Telephone No: 0755-66609352 Email: [email protected] FRN: 0024854358 Signature: Wendy Luo Agent Information: Company Name: HOPEK CORPORATION INC Address:16755 Coyote Bush Dr Unit 84, San Diego, CA 92127 United States FRN: 0034562900 Contact Name: Yangyang Xu Telephone No: 561-875-9826 Email: [email protected] Signature: Yangyang Xu
Cover Letter(s)
Shenzhen FeiCan Technology Co., Limited Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: August 24, 2026 Subject; Request for Confidentiality FCC ID: 2AFRV-FC-NT-01 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Wendy Luo Title: sales manager
Cover Letter(s)
Effective Date: April 2, 2020 QSF 7.6.4-8 – Agent Authorization Letter Template Page 1 of 1 Revision Date: Revision: 0 Shenzhen FeiCan Technology Co., Limited Date：2026-08-24 Product Model Number: FC-NT-01, FC-NT-02, FC-NT-03, FC-NT-04, FC-NT-05, FC-NT-06, FC-BT-10CLD, FC-BT-16CLD, FC-BT-24CLD, FC-BT-20CLD, FC-BT-30CLD, FC-BT-WGD135, FC-BT-WGD30, FC-BT-WGD40, FC- BT-WGD20 FCC ID：2AFRV-FC-NT-01 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following: • Testing • Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. Signature: By: Wendy Luo Contact Listed on FCC Wesbite Title: sales manager Email: [email protected] On behalf of: Shenzhen FeiCan Technology Co., Limited
Cover Letter(s)
Shenzhen FeiCan Technology Co., Limited Declaration Letter of Model Difference Date: 2026-08-24 FCC ID: 2AFRV-FC-NT-01 Tested Model Number: FC-NT-01 Adding Model Number(s): FC-NT-02, FC-NT-03, FC-NT-04, FC-NT-05, FC-NT-06, FC-BT- 10CLD, FC-BT-16CLD, FC-BT-24CLD, FC-BT-20CLD, FC-BT-30CLD, FC-BT-WGD135, FC-BT- WGD30, FC-BT-WGD40, FC-BT-WGD20 All Adding Model Number(s) is/are same electrically identical as Tested Model Number. The dimensions of the lamps are different, while all other specifications are identical. Yours Sincerely, Applicant: Shenzhen FeiCan Technology Co., Limited Address: 3F, JBuilding, Longtianli Industrial Park, No.11, Zhangyi Road, Zhangge Community, Fucheng Street, Longhua District, Shenzhen, China Contact Person: Wendy Luo Tel.: 0755-66609352 Email: [email protected] Sincerely, Signature:
External Photos
Page 1 of 4 Report No.: LGT26H019 Appendix - External Photographs of EUT Constructional Details Photo 1 Photo 2 Page 2 of 4 Report No.: LGT26H019 Appendix - External Photographs of EUT Constructional Details Photo 3 Photo 4 Page 3 of 4 Report No.: LGT26H019 Appendix - External Photographs of EUT Constructional Details Photo 5 Photo 6 Page 4 of 4 Report No.: LGT26H019 Appendix - External Photographs of EUT Constructional Details Photo 7
ID Label/Location Info
Label Size: 10*50mm FCC ID: 2AFRV-FC-NT-01
Internal Photos
Page 1 of 2 Report No.: LGT26H019 Appendix - Internal Photographs of EUT Constructional Details Photo 1 Photo 2 Page 2 of 2 Report No.: LGT26H019 Appendix - Internal Photographs of EUT Constructional Details Photo 3 Photo 4 ANT
RF Exposure Info
The test report is effective only with both signature and specialized stamp. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report only apply to the tested sample. Shenzhen LGT Test Service Co., Ltd. Tel: 0755-89668180 E-mail:[email protected] Web: www.lgt-cert.com Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Page 1 of 8 EMF TEST REPORT Product Name: LED Net Lights Model Number: FC-NT-01, FC-NT-02, FC-NT-03, FC-NT-04, FC-NT-05, FC-NT-06, FC-BT-10CLD, FC-BT-16CLD, FC-BT-24CLD, FC-BT-20CLD, FC-BT-30CLD, FC-BT-WGD135, FC-BT-WGD30, FC-BT-WGD40, FC-BT-WGD20 FCC ID: 2AFRV-FC-NT-01 Issued For : Shenzhen FeiCan Technology Co., Limited 3F, JBuilding, Longtianli Industrial Park, No.11, Zhangyi Road, Zhangge Community, Fucheng Street, Longhua District, Shenzhen, China Issued By : Shenzhen LGT Test Service Co., Ltd. Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Report Number: LGT26H019HA01 Sample Received Date: Aug. 04, 2026 Date of Test: Aug. 04, 2026 ~ Aug. 12, 2026 Date of Issue: Aug. 12, 2026 Report No.: LGT26H019HA01 Page 2 of 8 TEST REPORT CERTIFICATION Applicant: Shenzhen FeiCan Technology Co., Limited Address: 3F, JBuilding, Longtianli Industrial Park, No.11, Zhangyi Road, Zhangge Community, Fucheng Street, Longhua District, Shenzhen, China Manufacturer: Shenzhen Feican Technology Co,. Ltd. Address: Room 301, 302, Building J, Longtianli Industrial Park, No. 11 Zhangyi Road, Zhangge Community, Fucheng Street, Longhua District, Shenzhen City, Guangdong Province, China Product Name: LED Net Lights Trademark: N/A Model Number: FC-NT-02, FC-NT-03, FC-NT-04, FC-NT-05, FC-NT-06, FC-BT-10CLD, FC-BT-16CLD, FC-BT-24CLD, FC-BT-20CLD, FC-BT-30CLD, FC-BT-WGD135, FC-BT-WGD30, FC-BT-WGD40, FC-BT-WGD20 Sample Status: Normal APPLICABLE STANDARDS STANDARD TEST RESULTS FCC 47 CFR §2.1093 KDB 447498 D01 General RF Exposure Guidance v06 PASS Prepared by: Approved by: Chris Chen Engineer Technical Director Report No.: LGT26H019HA01 Page 3 of 8 TABLE OF CONTENTS 1 . GENERAL INFORMATION 5 1.1 GENERAL DESCRIPTION OF THE EUT 5 1.2 TEST LABORATORY 5 2 . FCC 47CFR §2.1093 REQUIREMENT 6 2.1 TEST STANDARDS 6 2.2 LIMIT 6 2.3 TEST RESULT 8 Report No.: LGT26H019HA01 Page 4 of 8 Revision History Rev. Issue Date Revisions 00 Aug. 12, 2026 Initial Issue Report No.: LGT26H019HA01 Page 5 of 8 1. GENERAL INFORMATION 1.1 GENERAL DESCRIPTION OF THE EUT Product Name: LED Net Lights Test Model Number: FC-NT-01 Series Number: FC-NT-02, FC-NT-03, FC-NT-04, FC-NT-05, FC-NT-06, FC-BT-10CLD, FC-BT-16CLD, FC-BT-24CLD, FC-BT-20CLD, FC-BT-30CLD, FC-BT-WGD135, FC-BT-WGD30, FC-BT-WGD40, FC-BT-WGD20 Model Difference: The dimensions of the lamps are different, while all other specifications are identical. Frequency Bands: Bluetooth 2402-2480MHz Rating: Input: DC 5V 2A Hardware Version: N/A Software Version: N/A 1.2 TEST LABORATORY Company Name: Shenzhen LGT Test Service Co., Ltd. Address: Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Accreditation Certificate: FCC Registration No.: 746540 CAB ID: CN0136 Report No.: LGT26H019HA01 Page 6 of 8 2. FCC 47CFR §2.1093 REQUIREMENT 2.1 TEST STANDARDS The limit for Maximum Permissible Exposure (MPE) specified in KDB 447498 D01 General RF Exposure Guidance v06 is followed. The gain of the antennas used in the product is extracted from the Antenna data sheets provided and also the maximum total power input to the antenna is measured. Through the Friis transmission formula and the maximum gain of the antenna, we can calculate the distance, away from the product, where the limit of MPE is reached. Although the Friis Transmission formula is far field assumption, the calculated result of that is an over-prediction for near field power density. It is taken as worst case to specify the safety range. 2.2 LIMIT Approximate SAR Test Exclusion Power Thresholds at Selected Frequencies and Test Separation Distances are illustrated in the following Table. Report No.: LGT26H019HA01 Page 7 of 8 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] • [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,where f(GHz) is the RF channel transmit frequency in GHz. Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. Report No.: LGT26H019HA01 Page 8 of 8 2.3 TEST RESULT Turn up Result Mode Turn up Power BLE 1M-GFSK 0.5±1.5dBm BLE 2M-GFSK 0.5±1.5dBm The MPE result of worst mode: RF Function Frequency (MHz) Max Turn up Power (dBm) Max Turn up Power (mW) Estimated SAR Limit Ratio Result BLE 2440 2.00 1.58 0.495 3 0.165 Pass Note: 1. The Maximum Power Density is less than the limit, complies with the exemption requirements. ※※※※※END OF THE REPORT※※※※※
Test Report
A n t e n n a S t u d y D e b u g g i n g f r e q u e n c y b a n d : 2 4 0 0 ‐ 2 5 0 0 H M z V a l u a t i o n d a t e ： 2 0 2 4 . 1 0 . 2 8 8 C l i e n t N a m e : J M Z e n g g e C o . , L t d 1 P r o j e c t N a m e ： Z J - Z B C J S - H C 2 - C T - 1 K - D Z - P r o - 4 4 S D o n g g u a n A d d r e s s : R o o m 1 0 1 , B u i l d i n g 2 , N o . 9 X i n f a R o a d , L i n c u n , T a n g x i a T o w n , D o n g g u a n C i t y , G u a n g d o n g P r o v i n c e P C B A n t e n n a 2 T e s t i n g 3 D m i c r o w a v e d a r k r o o m ( 6 m * 6 m * 6 m ) T e s t i n g e n v i r o n m e n t P C B A n t e n n a 3 A n t e n n a • A n t e n n a n a m e : 2 . 4 G • A n t e n n a T y p e ： P C B • C o v e r s ： 2 4 0 0 / 2 5 0 0 M H z 4 S P a r a m e t e r _ R e t u r n L o s s & V S W R ‐ S m i t h 5 E f f i c i e n c y a n d G a i n F r e q u e n c y I D 1 2 3 4 5 6 7 8 9 1 0 1 1 F r e q u e n c y ( M H z ) 2 4 0 0 . 0 2 4 1 0 . 0 2 4 2 0 . 0 2 4 3 0 . 0 2 4 4 0 . 0 2 4 5 0 . 0 2 4 6 0 . 0 2 4 7 0 . 0 2 4 8 0 . 0 2 4 9 0 . 0 2 5 0 0 . 0 G a i n ( d B i ) - 0 . 4 6 0 . 0 3 - 0 . 3 1 - 0 . 3 2 - 0 . 1 5 0 . 0 0 0 . 1 3 0 . 1 3 0 . 1 7 0 . 3 9 0 . 4 3 E f f i c i e n c y ( % ) 2 7 . 4 4 2 7 . 2 0 2 5 . 1 8 2 5 . 3 5 2 6 . 6 5 2 7 . 4 7 2 9 . 9 9 3 0 . 3 0 2 7 . 7 6 2 6 . 9 1 2 7 . 0 0 2400.0MHz Total, Eff: 27.4%Back View2400.0MHz Total(E1-XZ), Max= -0.46dBi2400.0MHz Total(E2-YZ), Max= -3.25dBiTotal(H-XY), Max= -2.05dBi, CirD=6.51 -0.46 -2.3 -4.15 -5.99 -7.83 -9.67 -11.52 -13.36 -15.2 -17.04 -18.88 -20.73 -22.57 -24.41 -26.25 -28.09 -29.94 -31.78 2410.0MHz Total, Eff: 27.2%Back View2410.0MHz Total(E1-XZ), Max= 0.03dBi2410.0MHz Total(E2-YZ), Max= -3.48dBiTotal(H-XY), Max= -2.14dBi, CirD=6.81 0.03 -1.81 -3.65 -5.5 -7.34 -9.18 -11.02 -12.86 -14.71 -16.55 -18.39 -20.23 -22.07 -23.92 -25.76 -27.6 -29.44 -31.28 2420.0MHz Total, Eff: 25.2%Back View2420.0MHz Total(E1-XZ), Max= -0.31dBi2420.0MHz Total(E2-YZ), Max= -3.39dBiTotal(H-XY), Max= -2.39dBi, CirD=7.76 -0.31 -2.15 -4 -5.84 -7.68 -9.52 -11.36 -13.21 -15.05 -16.89 -18.73 -20.57 -22.42 -24.26 -26.1 -27.94 -29.78 -31.63 2430.0MHz Total, Eff: 25.3%Back View2430.0MHz Total(E1-XZ), Max= -0.32dBi2430.0MHz Total(E2-YZ), Max= -2.98dBiTotal(H-XY), Max= -2.50dBi, CirD=8.61 -0.32 -2.16 -4.01 -5.85 -7.69 -9.53 -11.37 -13.22 -15.06 -16.9 -18.74 -20.58 -22.43 -24.27 -26.11 -27.95 -29.8 -31.64 2440.0MHz Total, Eff: 26.6%Back View2440.0MHz Total(E1-XZ), Max= -0.15dBi2440.0MHz Total(E2-YZ), Max= -2.82dBiTotal(H-XY), Max= -2.13dBi, CirD=8.74 -0.15 -2 -3.84 -5.68 -7.52 -9.37 -11.21 -13.05 -14.89 -16.73 -18.58 -20.42 -22.26 -24.1 -25.94 -27.79 -29.63 -31.47 2450.0MHz Total, Eff: 27.5%Back View2450.0MHz Total(E1-XZ), Max= 0.00dBi2450.0MHz Total(E2-YZ), Max= -3.07dBiTotal(H-XY), Max= -1.98dBi, CirD=8.14 0 -1.84 -3.68 -5.52 -7.37 -9.21 -11.05 -12.89 -14.73 -16.58 -18.42 -20.26 -22.1 -23.94 -25.79 -27.63 -29.47 -31.31 2460.0MHz Total, Eff: 30.0%Back View2460.0MHz Total(E1-XZ), Max= 0.13dBi2460.0MHz Total(E2-YZ), Max= -2.52dBiTotal(H-XY), Max= -1.67dBi, CirD=6.96 0.13 -1.72 -3.56 -5.4 -7.24 -9.09 -10.93 -12.77 -14.61 -16.45 -18.3 -20.14 -21.98 -23.82 -25.66 -27.51 -29.35 -31.19 2470.0MHz Total, Eff: 30.3%Back View2470.0MHz Total(E1-XZ), Max= 0.13dBi2470.0MHz Total(E2-YZ), Max= -2.60dBiTotal(H-XY), Max= -1.92dBi, CirD=6.01 0.13 -1.71 -3.56 -5.4 -7.24 -9.08 -10.92 -12.77 -14.61 -16.45 -18.29 -20.13 -21.98 -23.82 -25.66 -27.5 -29.34 -31.19 2480.0MHz Total, Eff: 27.8%Back View2480.0MHz Total(E1-XZ), Max= 0.17dBi2480.0MHz Total(E2-YZ), Max= -3.25dBiTotal(H-XY), Max= -2.61dBi, CirD=5.98 0.17 -1.67 -3.51 -5.35 -7.2 -9.04 -10.88 -12.72 -14.56 -16.41 -18.25 -20.09 -21.93 -23.77 -25.62 -27.46 -29.3 -31.14 2490.0MHz Total, Eff: 26.9%Back View2490.0MHz Total(E1-XZ), Max= 0.39dBi2490.0MHz Total(E2-YZ), Max= -3.03dBiTotal(H-XY), Max= -2.93dBi, CirD=7.20 0.39 -1.46 -3.3 -5.14 -6.98 -8.82 -10.67 -12.51 -14.35 -16.19 -18.03 -19.88 -21.72 -23.56 -25.4 -27.25 -29.09 -30.93 2500.0MHz Total, Eff: 27.0%Back View2500.0MHz Total(E1-XZ), Max= 0.43dBi2500.0MHz Total(E2-YZ), Max= -2.55dBiTotal(H-XY), Max= -2.55dBi, CirD=8.56 0.43 -1.41 -3.25 -5.09 -6.94 -8.78 -10.62 -12.46 -14.3 -16.15 -17.99 -19.83 -21.67 -23.51 -25.36 -27.2 -29.04 -30.88
Test Report
The test report is effective only with both signature and specialized stamp. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report only apply to the tested sample. Shenzhen LGT Test Service Co., Ltd. Tel: 0755-89668180 E-mail:[email protected] Web: www.lgt-cert.com Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Page 1 of 56 RF TEST REPORT Product Name: LED Net Lights Model Number: FC-NT-01, FC-NT-02, FC-NT-03, FC-NT-04, FC-NT-05, FC-NT-06, FC-BT-10CLD, FC-BT-16CLD, FC-BT-24CLD, FC-BT-20CLD, FC-BT-30CLD, FC-BT-WGD135, FC-BT-WGD30, FC-BT-WGD40, FC-BT-WGD20 FCC ID: 2AFRV-FC-NT-01 Issued For : Shenzhen FeiCan Technology Co., Limited 3F, JBuilding, Longtianli Industrial Park, No.11, Zhangyi Road, Zhangge Community, Fucheng Street, Longhua District, Shenzhen, China Issued By : Shenzhen LGT Test Service Co., Ltd. Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Report Number: LGT26H019RF01 Sample Received Date: Aug. 04, 2026 Date of Test: Aug. 04, 2026 ~ Aug. 12, 2026 Date of Issue: Aug. 12, 2026 Report No.: LGT26H019RF01 Page 2 of 56 TEST REPORT CERTIFICATION Applicant: Shenzhen FeiCan Technology Co., Limited Address: 3F, JBuilding, Longtianli Industrial Park, No.11, Zhangyi Road, Zhangge Community, Fucheng Street, Longhua District, Shenzhen, China Manufacturer: Shenzhen Feican Technology Co,. Ltd. Address: Room 301, 302, Building J, Longtianli Industrial Park, No. 11 Zhangyi Road, Zhangge Community, Fucheng Street, Longhua District, Shenzhen City, Guangdong Province, China Product Name: LED Net Lights Trademark: N/A Model Number: FC-NT-01, FC-NT-02, FC-NT-03, FC-NT-04, FC-NT-05, FC-NT-06, FC-BT-10CLD, FC-BT-16CLD, FC-BT-24CLD, FC-BT-20CLD, FC-BT-30CLD, FC-BT-WGD135, FC-BT-WGD30, FC-BT-WGD40, FC-BT-WGD20 Sample Status: Normal APPLICABLE STANDARDS STANDARD TEST RESULTS FCC Part 15.247, Subpart C ANSI C63.10-2020 + Cor. 1-2023+C63.10a-2024 + Errata to C63.10a-2024 PASS Prepared by: Approved by: Chris Chen Vita Li Engineer Technical Director Report No.: LGT26H019RF01 Page 3 of 56 Table of Contents Page 1. SUMMARY OF TEST RESULTS 6 1.1 TEST LABORATORY 7 1.2 MEASUREMENT UNCERTAINTY 7 2. GENERAL INFORMATION 8 2.1 GENERAL DESCRIPTION OF THE EUT 8 2.2 DESCRIPTION OF THE TEST MODES 9 2.3 TEST SOFTWARE AND POWER LEVEL 9 2.4 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 10 2.5 EQUIPMENTS LIST 11 3. EMC EMISSION TEST 13 3.1 CONDUCTED EMISSION MEASUREMENT 13 3.2 TEST PROCEDURE 14 3.3 TEST SETUP 14 3.4 EUT OPERATING CONDITIONS 14 3.5 TEST RESULTS 15 4. RADIATED EMISSION MEASUREMENT 17 4.1 RADIATED EMISSION LIMITS 17 4.2 TEST PROCEDURE 19 4.3 TEST SETUP 19 4.4 EUT OPERATING CONDITIONS 20 4.5 FIELD STRENGTH CALCULATION 20 4.6 TEST RESULTS (BAND EDGE REQUIREMENTS) 25 5. CONDUCTED SPURIOUS & BAND EDGE EMISSION 27 5.1 LIMIT 27 5.2 TEST PROCEDURE 27 5.3 TEST SETUP 27 5.4 EUT OPERATION CONDITIONS 27 5.5 TEST RESULTS 27 6. POWER SPECTRAL DENSITY TEST 28 6.1 LIMIT 28 6.2 TEST PROCEDURE 28 6.3 TEST SETUP 28 6.4 EUT OPERATION CONDITIONS 28 Report No.: LGT26H019RF01 Page 4 of 56 6.5 TEST RESULTS 28 7. BANDWIDTH TEST 29 7.1 LIMIT 29 7.2 TEST PROCEDURE 29 7.3 TEST SETUP 29 7.4 EUT OPERATION CONDITIONS 29 7.5 TEST RESULTS 29 8. PEAK OUTPUT POWER TEST 30 8.1 LIMIT 30 8.2 TEST PROCEDURE 30 8.3 TEST SETUP 30 8.4 EUT OPERATION CONDITIONS 30 8.5 TEST RESULTS 30 9. ANTENNA REQUIREMENT 31 9.1 STANDARD REQUIREMENT 31 9.2 EUT ANTENNA 31 APPENDIX I - TEST RESULTS 32 DUTY CYCLE 32 MAXIMUM PEAK CONDUCTED OUTPUT POWER 35 -6DB BANDWIDTH 38 OCCUPIED CHANNEL BANDWIDTH 41 MAXIMUM POWER SPECTRAL DENSITY LEVEL 44 BAND EDGE 47 CONDUCTED RF SPURIOUS EMISSION 51 APPENDIX II - MEASUREMENT PHOTOS 56 Report No.: LGT26H019RF01 Page 5 of 56 Revision History Rev. Issue Date Revisions 00 Aug. 12, 2026 Initial Issue Report No.: LGT26H019RF01 Page 6 of 56 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: KDB 558074 D01 Part 15.247 Meas Guidance v05r02. FCC Part 15.247, Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS -- 15.247 (a)(2) 6dB Bandwidth PASS -- 15.247 (b)(3) Output Power PASS -- 15.209 Radiated Spurious Emission PASS -- 15.247 (d) Conducted Spurious & Band Edge Emission PASS -- 15.247 (e) Power Spectral Density PASS -- 15.205 Restricted Band Edge Emission PASS -- Part 15.247(d)/ Part 15.209(a) Band Edge Emission PASS -- 15.203 Antenna Requirement PASS -- NOTE: (1) ‘N/A’ denotes test is not applicable in this Test Report. (2) All tests are according to ANSI C63.10-2020 + Cor. 1-2023+C63.10a-2024 + Errata to C63.10a-2024. Report No.: LGT26H019RF01 Page 7 of 56 1.1 TEST LABORATORY Company Name: Shenzhen LGT Test Service Co., Ltd. Address: Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Accreditation Certificate: FCC Registration No.: 746540 CAB ID: CN0136 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 Occupied Channel Bandwidth ±0.46% 2 RF Output Power, Conducted ±0.71dB 3 Power Spectral Density, Conducted ±1.57dB 4 Unwanted Emission, Conducted ±0.63dB 5 Conducted emission ±2.80dB 6 All Emissions, Radiated (0.009-30MHz) ±2.16dB 7 All Emissions, Radiated (30MHz-1GHz) ±4.61dB 8 All Emissions, Radiated (1GHz-18GHz) ±5.49dB 9 All Emissions, Radiated (18GHz-40GHz) ±4.31dB 10 Temperature ±0.5°C 11 Humidity ±2% 12 Duty Cycle ±2.3% Note: The measurement uncertainty is not included in the test result. Report No.: LGT26H019RF01 Page 8 of 56 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF THE EU…
Text truncated - open the document above for the full version.
Test Setup Photos
Page 1 of 2 Report No.: LGT26H019 Appendix - Test Setup photos Set-up for Radiated Spurious Emission, Below 1GHz Set-up for Radiated Spurious Emission, Above 1GHz Page 2 of 2 Report No.: LGT26H019 Set-up for Conducted Emission
Contact Information
Applicant
Wendy Luo(sales manager)
[email protected]Fax: 0755-21503635
Technical Contact
Test Firm
Shenzhen LGT Test Service Co., Ltd.Wen Wen
Technical Specifications
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | 1.50 mW |
Other Applications from Shenzhen FeiCan Technology Co., Limited
2AFRV-FC-HG-01
Jan 31, 2026LED Hexagon Gaming Lights
Equipment Class
DTS - Digital Transmission System
2AFRV-FC-BT-10CLD
Jan 16, 2026LED lighting
Equipment Class
DTS - Digital Transmission System
2AFRVFC-MB-R10Q
Nov 30, 2020RF Mini RGB controller
Equipment Class
DSC - Part 15 Security/Remote Control Transmitter
2AFRVFC433CON5
Sep 20, 2015LED Controller
Equipment Class
CYY - Communications Receiver used w/Pt 15 Transmitter
2AFRVFC433RMT5
Sep 20, 2015Remote Controller
Equipment Class
DSC - Part 15 Security/Remote Control Transmitter