2AG7CSNAP6SBattery Camera

QUICK GUIDE ORIGINALITY DESIGN SMART - AND BEAUTIFUL BATTERY CAM Snap 6S 1 Please consult this checklist for all parts. What's in the box Bracket(B) USB cable Snap 6S Power adapter Screws(2 kinds)x2Manual Bracket(A) 2 Description Power Port Power on/off Status light DC 5V±10% Press the button for 3 seconds to turn on/off the camera Red light solids on: the camera network is abnormal Red light blinks: awaiting WiFi connection, or currently connecting (faster blinking) Blue light solids on: camera running correctly Support local SD Card storage (Max.128G) Press and hold on for 5 seconds to reset the camera Reset SD card slot Red indicator solids on: battery is charging Blue indicator solids on: charging completed Charging indicator Battery capacity9400mAh (Two 21700 lithium-ion batteries) PIR Sensor Lens Microphone Speaker Micro USB SD card slot Reset Charging indicator Status light Photosensitive 3 Install Mode 1 Bracket (A) Installation Mode 2 Bracket (B) Installation 2.Install the camera in the bracket and lock it with the screw 1.Fix the bracket on the wall 1.Fix the bracket on the wall with screws 2.Bring the camera closer to the bracket 0~90° 0~360° After ajusting your camera angle, please lock this screw 4 Download Smart Life is available for both iOS and Android OS. Rearch the name 'Smart Life'in App Store or Android Market, or scan the QR-Code to download the App. Set up router The router supports the 2.4GHz WiFi (doesn't support the 5GHz).Before connecting to the WiFi network,please set the parameters of the router, and record the SSID and password of your WiFi. Android IOS ·Support Download App(IOS&android) Connect 2.4GHz5GHz Please keep network available 5 Registration process Step 1 Open the Smart Life App, click "Register", read the "Privacy Policy" and click "Agree" . Step 2 Input a legal and valid Mobile number or Email address and click "Continue". Input Verification Code, then log in the app. Connect 6 QR Code Configuration Open the Smart Life App, click "Create family", and you can customize the Family name and related settings . 1 Continue to click "Security & Sensor" >> "Smart Camera",and then choose"Add Device" or "+",ready to add camera. 2 7 QR Code Configuration In "Add Device" this interface,continue to click "next step",and then you should input your WiFi's passwords. 3 Note: 1) Camera only supports 2.4GHz WiFi network. 2) The number of bits in the ssid and passwords of the router should not exceed 24 digits. 8 QR Code Configuration In this interface,you should scan the QR code in your phone with the camera,when the camera comes out "dong dong dong". And you can complete the configuration about 30s. 4 9 QR Code Configuration When connecting,you should make sure your router,mobile,and camera are as close as possible.When camera added successffully,click " " you could also DIY the camera's name. 5 10 In "Smart Camera" interface,click " ",you can set the camera common functions. Settings 11 Q: Why is it still in the list of devices after reseting? A: The reset device only resets the network configuration of the camera, but cannot change the configuration on the App, remove the camera, and must be deleted by the App. Q: How to cut the camera network to another router? A: First remove and reset the device on the App and then configure the device again by the App. Q: Why doesn't the device identify the SD card? A: It is recommended to plug in SD card after power cut. Confirm whether the SD card is normally available and the format is FAT32. And the TF card can’t be identified when the internet environment is not good. Q: Why I can’t get the notifications with my cell phone App? A: Please confirm that the App has been running on the phone, and the relevant reminder function has been opened;Message notification and authority confirmation in the mobile phone system have been opened. Q: The device cannot be previewed properly? A: Check whether the network is normal, you can place the camera close to the router, and if not, it is recommended to reset the device and add it again. FAQ DaytimeNight 12 Functions Record Using SD card or opening the Cloud-Storage Service, to keep recording for every moment. Day & Night Powerful night vision means no interruptions, even in complete darkness. Full-duplex audio You can see and hear the vistor in your App from the camera. PIR When the camera detects someone stopping by, it sends an alarm message to your cell phone. Low battery alarm When the battery power is lower than your set, the App will send a notification to your mobile phone. Remote wake-up The camera will be in a sleep mode to save power; you can have a preview in App. FCCStatement ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice, pursuanttopart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonable protectionagainstharmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates, usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewith theinstructions,maycauseharmfulinterferencetoradiocommunications.However,thereis noguaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoes causeharmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturning theequipmentoffandon,theuserisencouragedtotrytocorrecttheinterferencebyoneor moreofthefollowingmeasures: —Reorientorrelocatethereceivingantenna. —Increasetheseparationbetweentheequipmentandreceiver. —Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiveris connected. —Consultthedealeroranexperiencedradio/TVtechnicianforhelp. FCCRadiationExposureStatement ThisdevicecomplieswithFCCradiationexposurelimitssetforthforanuncontrolled environmentanditalsocomplieswithPart15oftheFCCRFRules.Thisequipmentmustbe installedandoperatedinaccordancewithprovidedinstructionsandtheantenna(s)usedfor thistransmittermustbeinstalledtoprovideaseparationdistanceofatleast20cmfromall personsandmustnotbeco-locatedoroperatinginconjunctionwithanyotheran…

Text truncated - open the document above for the full version.

ModelDeclarationLetter We,theundersigningcompany CompanyName:HangzhouMeariTechnologyCo.,Ltd. Address:Room604-605,Building1,No.768JianghongRoad,Changhestreet,Binjiang District,Hangzhou,zhejiang，China Herebyconfirmthatthefollowingproducts: Productdescription:BATTERYCAMERA Typedesignation:Snap6S,Snap6T,Snap6Q That AllversionsoftheModelSnap6S,Snap6TandSnap6Qareelectricallyequalexceptthemodelname. Date:2021-6-2 Name:ZhiyangChai Telephone:+8615869048127 E-mail:[email protected] Signature:

Confidentiality Request Letter For Certification Service in the USA FederalCommunicationCommission EquipmentAuthorizationDivision,ApplicationProcessingBranch 7435OaklandMillsRoad Columbia,MD21048 Towhomitmayconcern PursuanttoParagraphs§0.457and0.459oftheCommission’sRules(47C.F.R.)andSection §552(b)(4)oftheFreedomofInformationAct,werequestconfidentialityforthe documentationofthefollowingproducts: FCCIDModelname 2AG7CSNAP6SSnap6S,Snap6T,Snap6Q Fortheproductslistedabove,werequestpermanentconfidentialityforallapplicable exhibitsasthereare:  theOperationalDescription  theBlockDiagram theSchematics Theabovelistedexhibitscontaintradesecretsandproprietaryinformationthatcouldbeof benefittoourcompetitors. Ifyouhaveanyquestions,pleasefeelfreetocontactusattheaddressshownbelow. Sincerely, 2021-6-2 SignatureDate PrintedNameofSignee: Company:HangzhouMeariTechnologyCo.,Ltd. Address: Room604-605,Building1,No.768JianghongRoad,Changhestreet,Binjiang District,Hangzhou,zhejiang，China Phone: +8615869048127 Email:[email protected]

Report No.: GTS20210522004-1-7 Page 36 of 47 6. E X T E R N A L A N D I N T E R N A L P H O T O S O F T H E EUT Fig. 1 Fig. 2 Report No.: GTS20210522004-1-7 Page 37 of 47 Fig. 3 Fig. 4 Report No.: GTS20210522004-1-7 Page 38 of 47 Fig. 5 Fig. 6 Report No.: GTS20210522004-1-7 Page 39 of 47 Fig. 7 Fig. 8 Report No.: GTS20210522004-1-7 Page 40 of 47 Fig. 9 Fig. 10 Report No.: GTS20210522004-1-7 Page 41 of 47 Fig. 11 Fig. 12

Labellocation

Report No.: GTS20210522004-1-7 Page 42 of 47 Fig. 13 Fig. 14 Report No.: GTS20210522004-1-7 Page 43 of 47 Fig. 15 Fig. 16 Antenna Report No.: GTS20210522004-1-7 Page 44 of 47 Fig. 17 Fig. 18 Report No.: GTS20210522004-1-7 Page 45 of 47 Fig. 19 Fig. 20 Report No.: GTS20210522004-1-7 Page 46 of 47 Fig. 21 Fig. 22 Report No.: GTS20210522004-1-7 Page 47 of 47 Fig. 23 Fig. 24 .......................End of Report........................

Shenzhen Global Test Service Co.,Ltd. No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong RF Exposure evaluation Report Reference No...................... : FCC ID. ............................................ : GTS20210522004-1-8 2AG7CSNAP6S Compiled by ( position+printed name+signature) . : File administrators Peter Xiao Supervised by ( position+printed name+signature) . : Test Engineer Oliver Ou Approved by ( position+printed name+signature) . : Manager Simon Hu Date of issue .................................... : May.27, 2021 Representative Laboratory Name . : Shenzhen Global Test Service Co.,Ltd. Address ............................................ : No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong Applicant’s name ............................ : Hangzhou Meari Technology Co., Ltd. Address ............................................ : Room 604-605, Building 1, No.768 Jianghong Road, Changhe street, Binjiang District, Hangzhou, zhejiang, China Test specification ........................... : Standard ........................................... : 47CFR §1.1310 47CFR §2.1091 KDB447498 D01 General RF Exposure Guidance v06 TRF Originator .................................. : Shenzhen Global Test Service Co.,Ltd. Master TRF ...................................... : Dated 2014-12 Shenzhen Global Test Service Co.,Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Global Test Service Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Global Test Service Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : BATTERY CAMERA Trade Mark ....................................... : N/A Manufacturer .................................... : Hangzhou Meari Technology Co., Ltd. Model/Type reference ...................... : Snap 6S Listed Models .................................. : Snap 6T, Snap 6Q Modulation Type ............................... : IEEE 802.11b/802.11g/802.11n Operation Frequency........................ : From 2412MHz to 2462MHz Hardware Version ............................ : PCB-SNAP6S-H1MB_GC2063 REV3.0 Software Version .............................. : ppstrong-b6-neutral_std-1.3 Rating ............................................... : DC 3.7V by battery Recharged by DC 5.0V/1.0A Result ............................................... : PASS Report No.: GTS20210522004-1-8 Page 2 of 11 T E S T R E P O R T Test Report No. : GTS20210522004-1-8 May.27, 2021 ______________________________________________________________________________________________ Date of issue Equipment under Test : BATTERY CAMERA Model /Type : Snap 6S Listed model : Snap 6T, Snap 6Q Applicant : Hangzhou Meari Technology Co., Ltd. Address : Room 604-605, Building 1, No.768 Jianghong Road, Changhe street, Binjiang District, Hangzhou, zhejiang, China Manufacturer : Hangzhou Meari Technology Co., Ltd. Address : No. 91 Chutian Road, Xixing Street, Binjiang District, Hangzhou, Zhejiang, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: GTS20210522004-1-8 Page 3 of 11 Contents 1. SUMMARY ................................................................................................................................................................. 4 1.1 EUT CONFIGURATION ........................................................................................................................................................ 4 1.2 PRODUCT DESCRIPTION ..................................................................................................................................................... 4 2. TEST ENVIRONMENT ................................................................................................................................................. 5 2.1 ADDRESS OF THE TEST LABORATORY ..................................................................................................................................... 5 2.2 TEST FACILITY .................................................................................................................................................................. 5 2.3 ENVIRONMENTAL CONDITIONS ............................................................................................................................................ 5 2.4 STATEMENT OF THE MEASUREMENT UNCERTAINTY .................................................................................................................. 5 3. METHOD OF MEASUREMENT .................................................................................................................................... 6 3.1 APPLICABLE STANDARD ...................................................................................................................................................... 6 3.2 REQUIREMENT ................................................................................................................................................................. 6 3.3 LIMIT ............................................................................................................................................................................. 6 3.4 MPE CALCULATION METHOD ............................................................................................................................................. 7 3.5 ANTENNA INFORMATION .........................................…

Text truncated - open the document above for the full version.

Shenzhen Global Test Service Co.,Ltd. No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong FCC PART 15 SUBPART C TEST REPORT FCC PART 15.247 Report Reference No. .....................: FCC ID. ............................................ : GTS20210522004-1-7 2AG7CSNAP6S Compiled by ( position+printed name+signature) .. : File administrators Peter Xiao Supervised by ( position+printed name+signature) .. : Test Engineer Oliver Ou Approved by ( position+printed name+signature) .. : Manager Simon Hu Date of issue ..................................... : May.27, 2021 Representative Laboratory Name .: Shenzhen Global Test Service Co.,Ltd. Address ............................................ : No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong,China Applicant’s name ............................ : Hangzhou Meari Technology Co., Ltd. Address ............................................ : Room 604-605, Building 1, No.768 Jianghong Road, Changhe street, Binjiang District, Hangzhou, zhejiang, China Test specification ...........................: Standard ........................................... : FCC Part 15.247: Operation within the bands 902-928 MHz, 2400- 2483.5 MHz and 5725-5850 MHz TRF Originator .................................. : Shenzhen Global Test Service Co.,Ltd. Master TRF ....................................... : Dated 2014-12 Shenzhen Global Test Service Co.,Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Global Test Service Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Global Test Service Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description .....................: BATTERY CAMERA Trade Mark ....................................... : N/A Manufacturer .................................... : Hangzhou Meari Technology Co., Ltd. Model/Type reference....................... : Snap 6S Listed Models .................................. : Snap 6T, Snap 6Q Operation Frequency ........................ : From 2412MHz to 2462MHz Hardware Version ............................ : PCB-SNAP6S-H1MB_GC2063 REV3.0 Software Version .............................. : ppstrong-b6-neutral_std-1.3 Rating ............................................... : DC 3.7V by battery Recharged by DC 5.0V/1.0A Result................................................ : PASS Report No.: GTS20210522004-1-7 Page 2 of 47 T E S T R E P O R T Test Report No. : GTS20210522004-1-7 May.27, 2021 ____________________________________________________________________________________ Date of issue Equipment under Test : BATTERY CAMERA Model /Type : Snap 6S Listed model : Snap 6T, Snap 6Q Applicant : Hangzhou Meari Technology Co., Ltd. Address : Room 604-605, Building 1, No.768 Jianghong Road, Changhe street, Binjiang District, Hangzhou, zhejiang, China Manufacturer : Hangzhou Meari Technology Co., Ltd. Address : No. 91 Chutian Road, Xixing Street, Binjiang District, Hangzhou, Zhejiang, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: GTS20210522004-1-7 Page 3 of 47 Contents 1. TEST STANDARDS ......................................................................................................................................... 4 2. SUMMARY ....................................................................................................................................................... 5 2.1. General Remarks ................................................................................................................................... 5 2.2. Product Description ................................................................................................................................ 5 2.3. Equipment Under Test ........................................................................................................................... 6 2.4. Short description of the Equipment under Test (EUT) ........................................................................... 6 2.5. EUT operation mode .............................................................................................................................. 6 2.6. Block Diagram of Test Setup ................................................................................................................. 6 2.7. Related Submittal(s) / Grant (s) ............................................................................................................. 7 2.8. EUT Exercise Software .......................................................................................................................... 7 2.9. Special Accessories ............................................................................................................................... 7 2.10. External I/O Cable ................................................................................................................................ 7 2.11. Modifications ........................................................................................................................................ 7 3. TEST ENVIRONMENT ..................................................................................................................................... 8 3.1. Address of the test laboratory ................................................................................................................ 8 3.2. Test Facility ......................................…

Text truncated - open the document above for the full version.

Report No.: GTS20210522004-1-7 Page 33 of 47 5. T E S T S E T U P P H O T O S O F T H E E U T Adapter: TPA-46B050100UU Radiated Emission Report No.: GTS20210522004-1-7 Page 34 of 47 Conducted Emission Adapter:GTA92-0501000US Radiated Emission Report No.: GTS20210522004-1-7 Page 35 of 47 Conducted Emission