2AGBW9290032837WiZ Camera Module

WiZ camera module – Instruction manual Version 0.2 Pa g e 1 | 9 Classified Product name: WiZ camera module Model name: 9290032837 Pr oduct briefing: WiZ Camera module is offered as a Connected module which can be integrated into Luminaire, offering the Home Monitoring proposition next to Connected lighting. WiZ camera module – Instruction manual Version 0.2 Pa g e 2 | 9 Classified Mounting reference: Dim ension ： WiZ camera module – Instruction manual Version 0.2 Pa g e 3 | 9 Classified Connection (flying cable): Product interfacing info: WiZ camera module – Instruction manual Version 0.2 Pa g e 4 | 9 Classified Electrical information: Input voltage 5Vdc +/- 5% Current/Power 2A/10W RMS=3.3W, peak=6.2W (Max) Over voltage protection 12Vdc max. Protection against electric shock Class 2, SELV Radio Frequency 2400MHz-2483.5MHz EU: 1-13 channel NAM: 1-11 channel Radio Transmission power 20dBm for NAM 16dBm for E.U. Wi-Fi communication range 150meters Line of Sight Mechanical information: Overall Dimension (main body) 97mmx 67mm x35mm Color Black Housing Material PC Net weight per piece 120g Ingress Protection IP54, Wet location Connection Flying cable, 30 cm Connectors PH2.0 2P, PH2.0 6P Strength relief >= 50N Environment and approbation: Operation temp -20°C...+45°C Storage temp -40°C...+70°C Operation relative humidity 0°C/10°C90%RH, +45°C80%RH no condensation Storage relative humidity +70°C 24hrs / -40°C 24hrs / +70°C 95%RH 24hrs no condensation Approbation WFA, UL, CB, RED, FCC/IC Hazardous substances compliance ROHS, REACH compliant Warranty 2 years Anti-UV 1.Optical parts (Lens cover, light sensor etc.): -∆E<2, -transmissivity degradation <2%, -Reflectivity degradation<2%) , -No impact for image quality and day/night scenes switch. 2.Other parts: ∆E<6; 3.Significant reduction in mechanical strength and pulverizing, embrittling, peeling, obvious color change are not allowed. WiZ camera module – Instruction manual Version 0.2 Pa g e 5 | 9 Classified Ot hers LED indicator Red, Green Button Tack switch SD card Micro-SD card support up to 1TB Not included Interface 8pin UART_TX(white), UART_RX(orange), GPIO_01(green), GPIO_02( purple ), GND( black ), USB_DP( blue ), USB_DM( brown ), 5V(red) Startup time 1min cold start at -20°C, 45seconds at 25°C WiZ camera module – Instruction manual Version 0.2 Pa g e 6 | 9 Classified WiZ camera module – Instruction manual Version 0.2 Pa g e 7 | 9 Classified Important notes for design-in: 1) The WiZ camera module works only with WiZ V2 app. 2) The WiZ camera module should be power ed with a Limited Power Supply (LPS) only according to UL IEC 62368 or equivalent. Please consult WiZ for more details if necessary. 3) It is the manufacturer’s responsibility of end products to ensure the full compliance of the fin al in tegration applications (i.e end products). 4) Please clean the camera lens gently with a cotton cloth and avoid touching the lens with hands directly to ensure clear view. 5) Please regularly clean the dust on microphone and speaker to ensure 2-way audio quality. 6) The WiZ camera module does not provide third-party monitoring or emergency response. It is the user’s responsibility to determinate the appropriate response. 7) The WiZ camera module is limited to a user’s own, private residential use. 8) The user is responsible to comply with privacy and other applicable laws. WiZ camera module – Instruction manual Version 0.2 Pa g e 8 | 9 Classified (W EEE dustbin logo and explanation) Simplified EU Declaration of Conformity Hereby, Signify declares that the radio equipment type WiZ camera module is in compliance with the Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.wizconnected.com . Simplified UK Declaration of Conformity Hereby, Signify declares that the radio equipment type WiZ camera module is in compliance with the Radio Equipment Regulations 2017 (S.I. 2017/1206). The full text of the UKCA declaration of conformity is available at the following internet address: www.wizconnected.com FCC compliance statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. WiZ camera module – Instruction manual Version 0.2 Pa g e 9 | 9 Classified This device complies with FCC RF exposure limits set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 20cm (8 inches) between the device and user body . ISED compliance statement This device complies with Innovation, Science and Economic Development Canada (ISED) lic…

Text truncated - open the document above for the full version.

CFR 47 §2.911 (d)(5) Attestation Date: 2023-08-14 FRN: 0024989014 FCC ID: 2AGBW9290032837 Product Model Number: 9290032837 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA 1.Signif y (China) Investment Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2.Signi fy (China) Investment Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sinc erely yours, Name: Yefeng Zhang Address: Building no.9, Lane 888, Tianlin Road, Minhang district Shanghai, 200233 China Email: [email protected] Job Title: Approbation Group Manager Company Name: Signify (China) Investment Co., Ltd.

CFR 47 §2.911 (d)(7) FCC US Agent Letter of Attestation Date: 2023-08-14 FRN: 0024989014 FCC ID: 2AGBW9290032837 Product Model Number: 9290032837 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA FCC US Agent Agent FRN: 0024909822 Agent Company Name: Signify North America Corporation Agent Contact Name: Richard Haring Agent US Address: 10275 West Higgins Road, Rosemont, IL 60018 Agent Email Address: [email protected] This letter is to confirm that we have accepted the responsibility to act as US Agent on behalf of Signify (China) Investment Co., Ltd. (“the applicant”) for the above referenced FCC ID. We are aware of the requirements and responsibilities of the applicant’s agent for service of process as outlined in the FCC section 2.911(d)(7) and Report and Order FCC 22-84 paragraph 63. Sincerely yours, Authorized Agent Contact Person Name: Richard Haring Agent contact Job Title: Validation Engineer Agent Company name: Signify North America Corporation

Company Name: Signify ( China ) Investment Co., Ltd Address: Building no.9, Lane 888, Tianlin Road, Minhang district Shanghai, 200233 China Tel: +86-17701755062 Fax No.: +86-21-54452269 E-mail: yefeng.zhang @ signi fy .com FCC Authorization Date: 08/09/2023 FEDERAL COMMUNICATIONS COMMISSION Authorization and E valuation Division 7435 Oakland Mills Road Columbia , MD 2 I 046 Sub j ect: Agent Authorization To whom it may concern: We, Signify (China) Investment Co., Ltd. , the undersigned, Hereby authorizes China Certification ICT Co.,Ltd(Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co.,Ltd(Dongguan) on our behalf shall have the same effect as our own action. We , the undersigned, hereby certify that we are not sub j ect to a denial offederal benefits , that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature 王 Printed Name: Yefeng Zhang Title: Approbation Group Manager Q A - FR-170-B

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230741391-EXP Page 1 of 3 EUT EXTERNAL PHOTOGRAPHS EUT China Certification ICT Co., Ltd (Dongguan) Report No.: CR230741391-EXP Page 2 of 3 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230741391-EXP Page 3 of 3

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230741391-INP Page 1 of 9 EUT INTERNAL PHOTOGRAPHS Uncover China Certification ICT Co., Ltd (Dongguan) Report No.: CR230741391-INP Page 2 of 9 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230741391-INP Page 3 of 9 Chain 0 Antenna 1 Chain 1 Antenna 2 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230741391-INP Page 4 of 9 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230741391-INP Page 5 of 9 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230741391-INP Page 6 of 9 Chain 0 Chain 1 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230741391-INP Page 7 of 9 Chip China Certification ICT Co., Ltd (Dongguan) Report No.: CR230741391-INP Page 8 of 9 Chip China Certification ICT Co., Ltd (Dongguan) Report No.: CR230741391-INP Page 9 of 9 Chip

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230741391-00A Page 82 of 85 5. RF EXPOSURE EVALUATION 5.1 MPE-Based Exemption 5.1.1 Applicable Standard According to §1.1307(b)(3)(i) (C) Or using Table 1 and the minimum separation distance (R in meters) from the body of a nearby person for the frequency (f in MHz) at which the source operates, the ERP (watts) is no more than the calculated value prescribed for that frequency. For the exemption in Table 1 to apply, R must be at least λ/2π, where λ is the free-space operating wavelength in meters. If the ERP of a single RF source is not easily obtained, then the available maximum time-averaged power may be used in lieu of ERP if the physical dimensions of the radiating structure(s) do not exceed the electrical length of λ/4 or if the antenna gain is less than that of a half-wave dipole (1.64 linear value). Table 1 to § 1.1307(b)(3)(i)(C) - Single RF Sources Subject to Routine Environmental Evaluation RF Source frequency (MHz) Threshold ERP (watts) 0.3-1.34 1,920 R 2 . 1.34-30 3,450 R 2 /f 2 . 30-300 3.83 R 2 . 300-1,500 0.0128 R 2 f. 1,500-100,000 19.2R 2 . 5.1.2 Measurement Result Operation Modes Frequency (MHz) λ/2π (mm) Distance (mm) Exemption ERPMaximum Conducted Power including Tune-up Tolerance (dBm) Antenna Gain (dBi) ERP (dBm) MPE- Based Exemption (mW)(dBm) WLAN 2.4G 2412-2462 19.80 200 768 28.85 20 4.45 22.3 Compliant Note: The Maximum Conducted Power including Tune-up Tolerance was declared by manufacturer. Result: The device compliant the MPE-Based Exemption at 20cm distances.

Signify Wiz Camera Module Antenna Test Report Apr. 20, 2023 Prepared by Carl Hung Confidential & Proprietary Outline •Antenna Structure & Placement •Return Loss & Isolation •Radiation Pattern •System Coverage •Peak Gain & Efficiency Confidential & Proprietary Antenna Structure & Placement Ant No.Operating BandTypeMaterial FeedingDimension Ant 1WiFi 2.4GDipole FPCBCable35 x 6.5 mm 2 Ant 2WiFi 2.4GDipoleFPCBCable32.6 x 7.7 mm 2 Ant 1 X Y Z Ant 2 Ant 2 Ant 1 Confidential & Proprietary Return Loss & Isolation Return loss Ant 2 Return loss Ant 1 Isolation Confidential & Proprietary 3D Radiation Pattern – Ant 1 @ 2.45GHz YX Plane ZX PlaneZY Plane Confidential & Proprietary YX Plane ZX PlaneZY Plane 3D Radiation Pattern – Ant 2 @ 2.45GHz Confidential & Proprietary System Coverage @ 2.45GHz XY Plane ZX PlaneZY Plane Ant 1 Ant 2 Z XY Z X Y Confidential & Proprietary Peak Gain & Efficiency Ant 1 WiFi 2G Frequency (MHz) Peak Gain (dBi) Efficiency (%) 2400 MHz 3.28 56.9 2450 MHz 3.48 60.4 2500 MHz 3.72 63.5 Ant 2 WiFi 2G Frequency (MHz) Peak Gain (dBi) Efficiency (%) 2400 MHz 4.37 64.0 2450 MHz 4.45 63.7 2500 MHz 4.33 61.2

TEST REPORT A pplicant: Signify (China) Investment Co., Ltd Address: Building no.9, Lane 888, Tianlin Road, Minhang District Shanghai, 200233 China FCC ID: 2AGBW9290032837 IC: 20812-9290032837 HVIN: 9290032837 Product Name: WiZ Camera Module Standard(s): 47 CFR Part 15, Subpart C(15.247) RSS-247 Issue 2, February 2017 RSS-Gen, Issue 5, February 2021 Amendment 2 ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 The above equipment has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR230741391-00A Date Of Issue: 2023/8/9 Reviewed By: Calvin Chen Title: RF Engineer Approved By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230741391-00A Page 2 of 85 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0123. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR230741391-00A Page 3 of 85 CONTENTS T EST FACILITY .......................................................................................................................................... 2 DECLARATIONS .......................................................................................................................................... 2 DOCUMENT REVISION HISTORY .......................................................................................... 5 1. GENERAL INFORMATION .................................................................................................... 6 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 6 1.2 DESCRIPTION OF TEST CONFIGURATION ........................................................................................... 8 1.2.2 Support Equipment List and Details .............................................................................................................. 8 1.2.3 Support Cable List and Details ...................................................................................................................... 8 1.2.4 Block Diagram of Test Setup ......................................................................................................................... 9 1.3 MEASUREMENT UNCERTAINTY ........................................................................................................ 10 2. SUMMARY OF TEST RESULTS .......................................................................................... 11 3. REQUIREMENTS AND TEST PROCEDURES .................................................................. 12 3.1 AC LINE CONDUCTED EMISSIONS .................................................................................................... 12 3.1.1 Applicable Standard ..................................................................................................................................... 12 3.1.2 EUT Setup.................................................................................................................................................... 14 3.1.3 EMI Test Receiver Setup ............................................................................................................................. 14 3.1.4 Test Procedure ............................................................................................................................................. 15 3.1.5 Corrected Amplitude & Margin Calculation ................................................................................................ 15 3.2 RADIATED SPURIOUS EMISSIONS ...................................................................................................... 16 3.2.1 Applicable Standard ..................................................................................................................................... 16 3.2.2 EUT Setup.................................................................................................................................................... 16 3.2.3 EMI Test Receiver & Spectrum Analyzer Setup ......................................................................................... 17 3.2.4 Test Procedure ............................................................................................................................................. 17 3.2.5 Corrected Amplitude & Margin Calculation ................................................................................................ 18 3.3 MINIMUM 6 DB BANDWIDTH: ........................................................................................................... 19…

Text truncated - open the document above for the full version.

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230741391-00A -TSP TEST SETUP PHOTOGRAPHS Conducted Emissions Front View Conducted Emissions Side View China Certification ICT Co., Ltd (Dongguan) Report No.: CR230741391-00A -TSP Radiated Emission Below 1GHz View Radiated Emission Above 1GHz View