2AGBW9290035755XLED lamp

A please go to www.philips-hue.com to learn more about Hue and how to use it This device complies with Part 15 of the FCC Rules and with RSS of ISEDC Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The advanced interface module complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 8" or 20cm between the radiator and your body. IMPORTANT NOTE: accessories such as Hue Bridge, Hue Smart Button, Hue Smart Plug, Hue Dimmer Switch and Hue Motion Sensor: this Class B digital apparatus complies with Canadian ICES-003. IMPORTANT NOTE BULBS: This Class B digital apparatus complies with CAN ICES-005 (B) / NMB-005 (B). This digital apparatus does not exceed the class B limits for radio-noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. NOTICE: Changes or modifications made to this device not expressly approved by Signify North America Corporation (“Signify’) may void the U.S. FCC and Canadian authorization to operate this device. This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - If applicable, connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/television technician for help LIMITED WARRANTY Signify warrants that this device’s hardware components will be free from defects in material and workmanship for a period of two (2) years from the date of purchase, unless a different period is stated in or on the packaging of the product, based on up to 3 hours average working time per day/7 days per week, when used as directed (the “Warranty Period”). Notwithstanding the foregoing, the Warranty Period for all Energy Star-certified products is three (3) years from the date of purchase. This limited warranty only applies to the hardware components contained in the original packaging. This limited warranty does not apply to any software, even if packaged or sold with the hardware components. Signify does not warrant that use of this device will be uninterrupted or error-free. If this device does not conform to this limited warranty, Signify will send you, at its election, a replacement device or refund your original price upon receipt of the returned device, register receipt and proof of purchase. Please call our toll-free number, 1-800-555-0050, or write to us (address indicated on the packaging) to find out how to return the device. This limited warranty does not cover devices subject to accident, neglect, abuse, misuse or acts of God. REPLACEMENT OR REFUND IS YOUR SOLE REMEDY. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE DURATION OF THIS LIMITED WARRANTY. LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS HEREBY EXPRESSELY EXCLUDED. Some states and provinces do not allow exclusion of incidental or consequential damages,sotheabovelimitationorexclusionmaynotapplytoyou.This limited warranty gives you specific legal rights, and you may also have other rightswhichvaryfromstatetostateandprovincetoprovince.Thislimited warranty is subject to, and may be superseded by, our End of Support policy to the extent Signify decides to terminate support for this device in accordance with its End of Support policy, available here: www.philips-hue.com/endofsupportpolicy WARNINGS AND CAUTIONS This product is not a toy designed to be played with by children. Keep away from young children Do not place on hot surfaces. Do not place on a thick rug or carpet. For safety reasons and under the terms of the warranty, none of the enclosed devices should be opened. Caution: do not use this bulb (E26 base) in a 3 way lamp socket (E26d) WARNINGS AND CAUTIONS FOR Hue indoor products The indoor product is for indoor use only. Do not use in a wet location, areas directly exposed to water or outdoors. Keep away from liquids and humidity. WARNINGS AND CAUTIONS FOR Hue outdoor Bulbs Use the product only in a fixture suitable for wet locations. The cap of the bulb is not suitable to be exposed to water nor wet conditions. WARNINGS AND CAUTIONS FOR PRODUCTS USING BATTERIES: Risk of explosion if the battery is replaced by an incorrect type. Batteries should be installed by an adult. Different types of batteries and new and used batteries must not be mixed. Batteries are to be inserted with the correct polarity. The supply terminals must not be short-circuited. Exhausted batteries are to be removed from the product. Do not use rechargeable batteries. Non-rechargeable batteries must not be charged. Disposal of your old product: Manage in accordance with disposal laws in your area. Remove the batteries when you discard the product. Do not throw the batteries away with normal household waste. They must be handed in at an official collection point or at a Philips Dealer, both of which will dispose of the b…

Text truncated - open the document above for the full version.

CFR 47 §2.911 (d)(7) FCC US Agent Letter of Attestation Date: 2023-07-19 FRN: 0024989014 FCC ID: 2AGBW9290035755X Product Model Number: 9290035755 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA FCC US Agent Agent Company Name: Signify North America Corporation Agent Contact Name: Richard Haring Agent US Address: 10275 West Higgins Road, Rosemont, IL 60018 Agent Email Address: [email protected] This letter is to confirm that we have accepted the responsibility to act as US Agent on behalf of Signify (China) Investment Co., Ltd. (“the applicant”) for the above referenced FCC ID. We are aware of the requirements and responsibilities of the applicant’s agent for service of process as outlined in the FCC section 2.911(d)(7) and Report and Order FCC 22-84 paragraph 63. Sincerely yours, Authorized Agent Contact Person Name: Richard Haring Agent contact Job Title: Validation Engineer Agent Company name: Signify North America Corporation

CFR 47 §2.911 (d)(7) Agent Designation Attestation Date: 2023-07-19 FRN: 0024989014 FCC ID: 2AGBW9290035755X Product Model Number: 9290035755 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Signify (China) Investment Co., Ltd. (“the applicant”) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicant’s agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. U. S. Agent Information: Contact Person: Richard Haring Company Name: Signify North America Corporation Company Address: 10275 West Higgins Road, Rosemont, IL 60018 Email: [email protected] Sincerely yours, Name: Yefeng Zhang Job Title: Validation & Approbation Group Manager Company Name: Signify (China) Investment Co., Ltd. Email: [email protected]

CFR 47 §2.911 (d)(5) Attestation Date: 2023-07-19 FRN: 0024989014 FCC ID: 2AGBW9290035755X Product Model Number: 9290035755 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA 1. Signify (China) Investment Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2. Signify (China) Investment Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Name: Yefeng Zhang Address: NO.9, Shanghai Business Park, Lane 888 Tianlin Road, Minhang District, Shanghai, P.R.C. Email: [email protected] Job Title: Validation & Approbation Group Manager Company Name: Signify (China) Investment Co., Ltd.

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2320237R-RF-External Photo Page 1 / 3 External Photographs EUT Photo(1) EUT Photo(2) DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2320237R-RF-External Photo Page 2 / 3 EUT Photo(3) EUT Photo(4) DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2320237R-RF-External Photo Page 3 / 3 EUT Photo(5) EUT Photo(6)

Classified Model No: 9290035755 FCC ID: 2AGBW9290035755X IC: 20812-35755X Made in China

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2320237R-RF-Internal Photo Page 1 / 5 Internal Photographs EUT Photo(1) EUT Photo(2) DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2320237R-RF-Internal Photo Page 2 / 5 EUT Photo(3) EUT Photo(4) DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2320237R-RF-Internal Photo Page 3 / 5 EUT Photo(5) EUT Photo(6) DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2320237R-RF-Internal Photo Page 4 / 5 EUT Photo(7) EUT Photo(8) DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2320237R-RF-Internal Photo Page 5 / 5 EUT Photo(9) EUT Photo(10)

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Test report No: 2320237R-RF-US-P20V01 RF Exposure Evaluation Exemption Report Product Name LED lamp Trademark PHILIPS Model and /or type reference 9290035755 FCC ID 2AGBW9290035755X Applicant ́s name / address Signify (China) Investment Co., Ltd. Building No.9, Lane 888, Tianlin Road, Minhang district, 200233, Shanghai, China. Test method requested, standard FCC 47CFR §2.1091 Verdict Summary IN COMPLIANCE Documented By (name / position & signature) Tim Cao/Project Manager Approved by (name / position & signature) Jack Zhang/ Manager Date of issue 2023-06-29 Report Version V1.0 Report template No Template_FCC MPE-RF-V1.0 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2320237R-RF-US-P20V01 Page 2 / 8 INDEX page Competences and Guarantees ............................................................................................................................................... 3 General conditions .................................................................................................................................................................... 3 Environmental conditions ......................................................................................................................................................... 3 Possible test case verdicts ...................................................................................................................................................... 4 Abbreviations ............................................................................................................................................................................. 4 Document History...................................................................................................................................................................... 5 Remarks and Comments ......................................................................................................................................................... 5 1. RF Exposure Evaluation ................................................................................................................................................ 6 1.1. Limits................................................................................................................................................................................. 6 1.2. Test Procedure ................................................................................................................................................................ 7 1.3. Test Result of RF Exposure Evaluation ....................................................................................................................... 7 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2320237R-RF-US-P20V01 Page 3 / 8 COMPETENCES AND GUARANTEES DEKRA is a testing laboratory competent to carry out the tests described in this report. In order to assure the traceability to other national and international laboratories, DEKRA has a calibration and maintenance program for its measurement equipment. DEKRA guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated in the report and it is based on the knowledge and technical facilities available at DEKRA at the time of performance of the test. DEKRA is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Test Report apply only to the particular item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of DEKRA. GENERAL CONDITIONS Test Location No. 99, Hongye Road, Suzhou Industrial Park Suzhou, 215006, P.R. China Date(receive sample) Feb. 09, 2023 Date (start test) Feb. 13, 2023 Date (finish test) Feb. 24, 2023 1. This report is only referred to the item that has undergone the test. 2. This report does not constitute or imply on its own an approval of the product by the Certification Bodies or Competent Authorities. 3. This document is only valid if complete; no partial reproduction can be made without previous written permission of DEKRA. 4. This test report cannot be used partially or in full for publicity and/or promotional purposes without previous written permission of DEKRA. ENVIRONMENTAL CONDITIONS The climatic conditions during the tests are within the limits specified by the manufacturer for the operation of the EUT and the test equipment. The climatic conditions during the tests were within the following limits: Ambient temperature 15°C - 35 °C Relative Humidity air 30% - 60% If explicitly required in the basic standard or applied product / product family standard the climatic values are recorded and documented separately in this test report. DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2320237R-RF-US-P20V01 Page 4 / 8 POSSIBLE TEST CASE VERDICTS Test case does not apply to test object N/A Test object does meet requirement P (Pass) / PASS Test object does not meet requirement F (Fail) / FAIL Not measured N/M ABBREVIATIONS For the purposes of the present document, the following abbreviations apply: EUT : Equipment Under Test QP : Quasi-Peak CAV :…

Text truncated - open the document above for the full version.

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Test report No: 2320237R-RF-US-P06V02 FCC & ISED TEST REPORT Product Name LED lamp Trademark PHILIPS Model and /or type reference 9290035755 FCC ID 2AGBW9290035755X IC 20812-35755X Applicant ́s name / address Signify (China) Investment Co., Ltd. Building No.9, Lane 888, Tianlin Road, Minhang district, 200233, Shanghai, China. Test method requested, standard CFR 47, FCC Part 15 Subpart C ANSI C63.10: 2013 RSS-Gen / RSS-247 Verdict Summary IN COMPLIANCE Documented by (name / position & signature) Tim Cao/Project Manager Approved by (name / position & signature) Jack Zhang/ Manager Date of issue 2023-07-05 Report Version V2.0 Report template No Template_FCC Part 15C-RF-V1.0 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2320237R-RF-US-P06V02 Page 2 / 69 INDEX page General conditions ............................................................................................................................................................ 5 Environmental conditions .................................................................................................................................................. 5 Possible test case verdicts ................................................................................................................................................ 6 Abbreviations..................................................................................................................................................................... 6 Document History .............................................................................................................................................................. 7 Remarks and Comments .................................................................................................................................................. 7 Used Equipment ................................................................................................................................................................ 8 Uncertainty ...................................................................................................................................................................... 10 1 General Information ............................................................................................................................................... 11 1.1 General Description of the Item(s) ............................................................................................................... 11 1.2 Antenna Information .................................................................................................................................... 12 1.3 Channel List ................................................................................................................................................. 13 2 Description of Test Setup....................................................................................................................................... 14 2.1 Operating mode(s) used for tests ................................................................................................................ 14 2.2 Auxiliary equipment / Test software for the EUT ......................................................................................... 14 2.3 Test Configuration / Block diagram used for tests ....................................................................................... 15 2.4 Testing process ........................................................................................................................................... 17 3 Verdict summary section ........................................................................................................................................ 18 3.1 Standards .................................................................................................................................................... 18 3.2 Deviation(s) from the Standard(s) / Test Specification(s) ............................................................................ 18 3.3 Overview of results ...................................................................................................................................... 19 3.4 Power setting in test .................................................................................................................................... 21 3.5 Test Matrix ................................................................................................................................................... 21 3.6 Test Facility .................................................................................................................................................. 22 4 Test Items Of Limit/Setup/Procedure ..................................................................................................................... 23 4.1 DTS Bandwidth ............................................................................................................................................ 23 4.1.1 Limit .................................................................................................................................................... 23 4.1.2 Test Setup .......................................................................................................................................... 23 4.1.3 Test Procedure ................................................................................................................................... 23 4.2 Occupied Channel Bandwidth ..................................................................................................................... …

Text truncated - open the document above for the full version.

1. Antenna test environment and procedure Test Block diagram OTA Anechoic Chamber and Its control equipment 2. Antenna model HWCA & HWA MR-16 PIFA antenna 3. Antenna gain The gain of horn antenna is tested, the Gain of antenna is calculated by comparing with tested horn antenna. 4. RF and antenna specification sheet Frequency Range 频率范围： 2400 ~ 2483.5MHz DATA Rate 传输速率： 250kbps (Zigbee); 1Mbps, 2Mbps, 500kbps,125kbps (BLE) Channel No. 频道数：Zigbee: 11 channels (2405MHz~ 2480MHz); BT: 40 channels (2402~2480MHz) Modulation type 调制方式： O-QPSK (Zigbee); GFSK (BLE) Max. Output Power 最大输出功率： +10dBm (Chip max RF output power) Operating Temperature 工作温度： -25 -- 100 °C ambient Antenna Gain 天线增益： 1 dBi (Peak) Antenna Brand & Model 天线商标&型号： PCB Antenna (PIFA antenna) 3D

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Test report No: 2320237R-RF-US-P06V01 FCC & ISED TEST REPORT Product Name LED lamp Trademark PHILIPS Model and /or type reference 9290035755 FCC ID 2AGBW9290035755X IC 20812-35755X Applicant ́s name / address Signify (China) Investment Co., Ltd. Building No.9, Lane 888, Tianlin Road, Minhang district, 200233, Shanghai, China. Test method requested, standard CFR 47, FCC Part 15 Subpart C ANSI C63.10: 2013 RSS-Gen / RSS-247 Verdict Summary IN COMPLIANCE Documented by (name / position & signature) Tim Cao/Project Manager Approved by (name / position & signature) Jack Zhang/ Manager Date of issue 2023-07-05 Report Version V2.0 Report template No Template_FCC Part 15C-RF-V1.0 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2320237R-RF-US-P06V01 Page 2 / 134 INDEX page General conditions ............................................................................................................................................................ 5 Environmental conditions .................................................................................................................................................. 5 Possible test case verdicts ................................................................................................................................................ 6 Abbreviations..................................................................................................................................................................... 6 Document History .............................................................................................................................................................. 7 Remarks and Comments .................................................................................................................................................. 7 Used Equipment ................................................................................................................................................................ 8 Uncertainty ...................................................................................................................................................................... 10 1 General Information ............................................................................................................................................... 11 1.1 General Description of the Item(s) ............................................................................................................... 11 1.2 Antenna Information .................................................................................................................................... 12 1.3 Channel List ................................................................................................................................................. 13 2 Description of Test Setup....................................................................................................................................... 14 2.1 Operating mode(s) used for tests ................................................................................................................ 14 2.2 Auxiliary equipment / Test software for the EUT ......................................................................................... 14 2.3 Test Configuration / Block diagram used for tests ....................................................................................... 15 2.4 Testing process ........................................................................................................................................... 17 3 Verdict summary section ........................................................................................................................................ 18 3.1 Standards .................................................................................................................................................... 18 3.2 Deviation(s) from the Standard(s) / Test Specification(s) ............................................................................ 18 3.3 Overview of results ...................................................................................................................................... 19 3.4 Power setting in test .................................................................................................................................... 21 3.5 Test Matrix ................................................................................................................................................... 21 3.6 Test Facility .................................................................................................................................................. 22 4 Test Items Of Limit/Setup/Procedure ..................................................................................................................... 23 4.1 DTS Bandwidth ............................................................................................................................................ 23 4.1.1 Limit .................................................................................................................................................... 23 4.1.2 Test Setup .......................................................................................................................................... 23 4.1.3 Test Procedure ................................................................................................................................... 23 4.2 Occupied Channel Bandwidth ....................................................................…

Text truncated - open the document above for the full version.