2AHYK-GIECZ2001Bluetooth headset

Test Model No.: GIEC Z2001 Right earphone Left earphone

Test Model No.: GIEC Z2001 Right earphone Left earphone

FCC ID: 2AHYK-GIECZ2001 RF Exposure evaluation According to 447498 D04 Interim General RF Exposure Guidance v01 ERP/EIRP = P T +G T −L C ERP/EIRP is the equivalent (or effective) radiated power [in same units as P T , typically dBW, dBm, or power spectral density (psd)], relative to either a dipole antenna (ERP) or an isotropic antenna (EIRP). P T is the transmitter output power, in dBW, dBm, or psd (power over a specified reference bandwidth). G T is the gain of the transmitting antenna, in dBd (ERP) or dBi (EIRP). L C is the signal attenuation in the connecting cable between the transmitter and the antenna, in dB. FCC ID: 2AHYK-GIECZ2001 BT EDR mode: Frequency (MHz) Output power to antenna (dBm) Ant gain(dBi) EIRP (dBm) ERP(dBm) ERP(mw) Distance(cm) P th (mW) Left earphone 2480 0.03 3.92 3.95 1.8 1.51 0.5 2.7 Right earphone 2480 0.24 3.92 4.16 2.01 1.59 0.5 2.7 ERP = EIRP −2.15 dB WORSE CASE Left earphone: 1.8mW<2.7mW Right earphone: 2.01mW<2.7mW BLE mode: Frequency (MHz) Output power to antenna (dBm) Ant gain(dBi) EIRP (dBm) ERP(dBm) ERP(mw) Distance(cm) P th (mW) Left earphone 2440 -3.02 3.92 0.9 -1.25 0.75 0.5 2.8 Right earphone 2480 -1.50 3.92 2.42 0.27 1.06 0.5 2.7 ERP = EIRP −2.15 dB WORSE CASE Left earphone: 0.75mW<2.8mW Right earphone: 1.06mW<2.7mW Remark: Then SAR evaluation is not required

Report No.: GTS202210000016F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 1 of 26 Appendix for 15.247 1. Bandwidth 1.1 OBW 1.1.1 Test Result Mode TX Type Frequency (MHz) ANT 99% Occupied Bandwidth (MHz) Verdict Result GFSK_1M SISO 2402 1 1.017 Pass 2440 1 1.016 Pass 2480 1 1.016 Pass GFSK_2M SISO 2402 1 2.054 Pass 2440 1 2.055 Pass 2480 1 2.057 Pass Report No.: GTS202210000016F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 26 1.1.2 Test Graph GFSK_1M_LCH_240GFSK_2MHz_Ant1_NTNV GFSK_1M_MCH_2440MHz_Ant1_NTNV Report No.: GTS202210000016F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 26 GFSK_1M_HCH_2480MHz_Ant1_NTNV GFSK_2M_LCH_240GFSK_2MHz_Ant1_NTNV Report No.: GTS202210000016F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 4 of 26 GFSK_2M_MCH_2440MHz_Ant1_NTNV GFSK_2M_HCH_2480MHz_Ant1_NTNV Report No.: GTS202210000016F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 5 of 26 1.2 6dB BW 1.2.1 Test Result Mode TX Type Frequency (MHz) ANT 6dB Bandwidth (MHz) Verdict Result Limit GFSK_1M SISO 2402 1 0.505 >=0.5 Pass 2440 1 0.504 >=0.5 Pass 2480 1 0.502 >=0.5 Pass GFSK_2M SISO 2402 1 0.852 >=0.5 Pass 2440 1 0.853 >=0.5 Pass 2480 1 0.854 >=0.5 Pass Report No.: GTS202210000016F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 6 of 26 1.2.2 Test Graph GFSK_1M_LCH_240GFSK_2MHz_Ant1_NTNV GFSK_1M_MCH_2440MHz_Ant1_NTNV Report No.: GTS202210000016F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 7 of 26 GFSK_1M_HCH_2480MHz_Ant1_NTNV GFSK_2M_LCH_240GFSK_2MHz_Ant1_NTNV Report No.: GTS202210000016F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 8 of 26 GFSK_2M_MCH_2440MHz_Ant1_NTNV GFSK_2M_HCH_2480MHz_Ant1_NTNV Report No.: GTS202210000016F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 9 of 26 2. Maximum Conducted Output Power 2.1 Test Result Mode TX Type Frequency (MHz) Maximum Peak Conducted Output Power (dBm) Verdict ANT1 Limit GFSK_1M SISO 2402 -4.36 <=30 Pass 2440 -3.02 <=30 Pass 2480 -4.30 <=30 Pass GFSK_2M SISO 2402 -6.61 <=30 Pass 2440 -5.37 <=30 Pass 2480 -4.19 <=30 Pass Report No.: GTS202210000016F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 10 of 26 2.2 Test Graph GFSK_1M_LCH_240GFSK_2MHz_Ant1_NTNV GFSK_1M_MCH_2440MHz_Ant1_NTNV Report No.: GTS202210000016F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 11 of 26 GFSK_1M_HCH_2480MHz_Ant1_NTNV GFSK_2M_LCH_240GFSK_2MHz_Ant1_NTNV Report No.: GTS202210000016F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 12 of 26 GFSK_2M_MCH_2440MHz_Ant1_NTNV GFSK_2M_HCH_2480MHz_Ant1_NTNV Report No.: GTS202210000016F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 13 of 26 3. Maximum Power Spectral Density 3.1 Test Result Mode TX Type Frequency (MHz) Maximum PSD (dBm/3kHz) Verdict ANT1 Limit GFSK_1M SISO 2402 -22.27 <=8 Pass 2440 -21.01 <=8 Pass 2480 -22.30 <=8 Pass GFSK_2M SISO 2402 -27.36 <=8 Pass 2440 -26.07 <=8 Pass 2480 -24.93 <=8 Pass Report No.: GTS202210000016F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 14 of 26 3.2 Test Graph GFSK_1M_LCH_240GFSK_2MHz_Ant1_NTNV GFSK_1M_MCH_2440MHz_Ant1_NTNV Report No.: GTS202210000016F02 Global United Technology Services Co., Ltd. No. 123- 12…

Text truncated - open the document above for the full version.

Report No.: GTS202210000016F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 1 of 26 Appendix for 15.247 1. Bandwidth 1.1 OBW 1.1.1 Test Result Mode TX Type Frequency (MHz) ANT 99% Occupied Bandwidth (MHz) Verdict Result GFSK_1M SISO 2402 1 1.016 Pass 2440 1 1.016 Pass 2480 1 1.016 Pass GFSK_2M SISO 2402 1 2.054 Pass 2440 1 2.055 Pass 2480 1 2.052 Pass Report No.: GTS202210000016F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 26 1.1.2 Test Graph GFSK_1M_LCH_240GFSK_2MHz_Ant1_NTNV GFSK_1M_MCH_2440MHz_Ant1_NTNV Report No.: GTS202210000016F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 26 GFSK_1M_HCH_2480MHz_Ant1_NTNV GFSK_2M_LCH_240GFSK_2MHz_Ant1_NTNV Report No.: GTS202210000016F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 4 of 26 GFSK_2M_MCH_2440MHz_Ant1_NTNV GFSK_2M_HCH_2480MHz_Ant1_NTNV Report No.: GTS202210000016F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 5 of 26 1.2 6dB BW 1.2.1 Test Result Mode TX Type Frequency (MHz) ANT 6dB Bandwidth (MHz) Verdict Result Limit GFSK_1M SISO 2402 1 0.503 >=0.5 Pass 2440 1 0.507 >=0.5 Pass 2480 1 0.505 >=0.5 Pass GFSK_2M SISO 2402 1 0.854 >=0.5 Pass 2440 1 0.851 >=0.5 Pass 2480 1 0.853 >=0.5 Pass Report No.: GTS202210000016F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 6 of 26 1.2.2 Test Graph GFSK_1M_LCH_240GFSK_2MHz_Ant1_NTNV GFSK_1M_MCH_2440MHz_Ant1_NTNV Report No.: GTS202210000016F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 7 of 26 GFSK_1M_HCH_2480MHz_Ant1_NTNV GFSK_2M_LCH_240GFSK_2MHz_Ant1_NTNV Report No.: GTS202210000016F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 8 of 26 GFSK_2M_MCH_2440MHz_Ant1_NTNV GFSK_2M_HCH_2480MHz_Ant1_NTNV Report No.: GTS202210000016F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 9 of 26 2. Maximum Conducted Output Power 2.1 Test Result Mode TX Type Frequency (MHz) Maximum Peak Conducted Output Power (dBm) Verdict ANT1 Limit GFSK_1M SISO 2402 -4.01 <=30 Pass 2440 -2.68 <=30 Pass 2480 -1.58 <=30 Pass GFSK_2M SISO 2402 -3.92 <=30 Pass 2440 -2.57 <=30 Pass 2480 -1.50 <=30 Pass Report No.: GTS202210000016F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 10 of 26 2.2 Test Graph GFSK_1M_LCH_240GFSK_2MHz_Ant1_NTNV GFSK_1M_MCH_2440MHz_Ant1_NTNV Report No.: GTS202210000016F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 11 of 26 GFSK_1M_HCH_2480MHz_Ant1_NTNV GFSK_2M_LCH_240GFSK_2MHz_Ant1_NTNV Report No.: GTS202210000016F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 12 of 26 GFSK_2M_MCH_2440MHz_Ant1_NTNV GFSK_2M_HCH_2480MHz_Ant1_NTNV Report No.: GTS202210000016F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 13 of 26 3. Maximum Power Spectral Density 3.1 Test Result Mode TX Type Frequency (MHz) Maximum PSD (dBm/3kHz) Verdict ANT1 Limit GFSK_1M SISO 2402 -21.94 <=8 Pass 2440 -20.63 <=8 Pass 2480 -19.42 <=8 Pass GFSK_2M SISO 2402 -24.55 <=8 Pass 2440 -23.15 <=8 Pass 2480 -22.00 <=8 Pass Report No.: GTS202210000016F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 14 of 26 3.2 Test Graph GFSK_1M_LCH_240GFSK_2MHz_Ant1_NTNV GFSK_1M_MCH_2440MHz_Ant1_NTNV Report No.: GTS202210000016F02 Global United Technology Services Co., Ltd. No. 123- 12…

Text truncated - open the document above for the full version.

Global United Technology Services Co., Ltd. Report No.: GTS202210000016F02 Authorized Signature: Robinson Luo Laboratory Manager This results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Page 1 of 45 TEST REPORT Applicant: SHENZHEN GIEC DIGITAL CO., LTD Address of Applicant: 1st&3rd Building, No.26 Puzai Road, Pingdi, Longgang District, Shenzhen, China Manufacturer: SHENZHEN GIEC DIGITAL CO., LTD Address of Manufacturer: 1st&3rd Building, No.26 Puzai Road, Pingdi, Longgang District, Shenzhen, China Factory: SHENZHEN JOWAY POWER SUPPLY CO., LTD Address of Factory: Building 11, antuoshan hi tech Industrial Park, Shaer community, Shajing street, Bao'an District, Shenzhen, China Equipment Under Test (EUT) Product Name: Bluetooth headset Model No.: GIEC Z2001 FCC ID: 2AHYK-GIECZ2001 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 Date of sample receipt: October 21, 2022 Date of Test: October 21, 2022-December 08, 2022 Date of report issued: December 08, 2022 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTS202210000016F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 45 2 Version Version No. Date Description 00 December 08, 2022 Original Prepared By: Date: December 08, 2022 Project Engineer Check By: Date: December 08, 2022 Reviewer Report No.: GTS202210000016F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 45 3 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 VERSION .................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................. 3 4 TEST SUMMARY ..................................................................................................................................... 4 5 GENERAL INFORMATION ...................................................................................................................... 5 5.1 GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 5.2 TEST MODE ........................................................................................................................................ 7 5.3 DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 7 5.4 DEVIATION FROM STANDARDS ............................................................................................................. 7 5.5 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................... 7 5.6 TEST FACILITY .................................................................................................................................... 7 5.7 TEST LOCATION ................................................................................................................................. 7 5.8 ADDITIONAL INSTRUCTIONS ................................................................................................................. 7 6 TEST INSTRUMENTS LIST ..................................................................................................................... 8 7 TEST RESULTS AND MEASUREMENT DATA .................................................................................... 10 7.1 ANTENNA REQUIREMENT ................................................................................................................... 10 7.2 CONDUCTED EMISSIONS ................................................................................................................... 11 7.3 CONDUCTED OUTPUT POWER ........................................................................................................... 14 7.4 CHANNEL BANDWIDTH ...................................................................................................................... 15 7.5 POWER SPECTRAL DENSITY ............................................................................................................. 16 7.6 SPURIOUS EMISSION IN NON-RESTRICTED & RESTRICTED BANDS ....................................................... 17 7.6.1 Conducted Emission Method ..................................................................................................... 17 7.6.2 Radiated Emission Method ........................................................................................................ 18 8 TEST SETUP PHOTO ............................................................................................................................ 45 9 EUT CONSTRUCTIONAL DETAILS ..................................................................................................... 45 Report No.: GTS202210000016F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 4 of 45 4 Test Summary Test Item Section in CFR 47 R…

Text truncated - open the document above for the full version.

承 認 書 SPECIFICATION FOR APPROVAL 客戶名稱 CUSTOMER ： 客戶料號 CUSTOMER’S P/N ： 料號 PART NUMBER ： WAN2020C245T06 規格 DESCRIPTION ： Chip Antenna 2020 M-Ant 2.45G Type T06 版本 VERSION ： V1.3 日期 ISSUE DATE ： 2021/03/03 客 戶 承 認 CUSTOMER APPROVED 工 程 部 R&D CENTER 承 認 APPROVAL 確 認 CHECKED 製 作 DRAWN Ray Tennyson Snow 萬誠科技股份有限公司 OneWave Electronic Co., Ltd. 112台北市北投區立功街151號1樓 1F, No. 151, Li Gong Street, Beitou District, Taipei City 112, Taiwan 電話: (02) 2898-2220 電話: (02) 2898-2220 傳真: (02) 2898-5055 傳真: (02) 2898-5055 ONEWAVE TECHNOLOGY CO., LTD. 2/11 2020 Chip antenna For Bluetooth / WLAN Applications Dimension (mm) L 2.25 ± 0.20 W 2.00 ± 0.20 T 2.10 ± 0.20 P/N: WAN2020C245T06 ONEWAVE TECHNOLOGY CO., LTD. 3/11 Part Number Information WAN 2020 C 245 T 06 A B C D E F A Product Series Antenna B Dimension L x W 2.25X2.0mm ( ± 0.2mm) C Material High K material D Working Frequency 2.4 ~ 2.5GHz E Feeding mode Monopole & Single Feeding F Antenna type Type = 06 1. Electrical Specification Remark : Bandwidth & Peak Gain was measured under evaluation board of next page Specification Part Number WAN2020C245T06 Central Frequency 2450 MHz Bandwidth 100 (Min.) MHz Return Loss -10 (Max) dB Peak Gain 3.92 dBi Impedance 50 Ohm Operating Temperature -40～+110 °C Maximum Power 4 W Resistance to Soldering Heats 10 ( @ 260°C) sec. Polarization Linear Azimuth Beamwidth Omni-directional Termination Cu / Sn (Leadless) ONEWAVE TECHNOLOGY CO., LTD. 4/11 2. Recommended PCB Pattern Evaluation Board Dimension Unit : mm Suggested Matching Circuit 重要資訊 : 匹配元件建議使用精準度高的電感±0.1~0.3nH、電容±0.1pF 3.0nH 2 . 4pF ONEWAVE TECHNOLOGY CO., LTD. 5/11 Layout Dimensions in Clearance area (Size=14.40*5.40mm) 50 ohm transmission Line Matching Circuit FootPrint (Unit : mm) . 0.600 0.600 1.400 2.000 ONEWAVE TECHNOLOGY CO., LTD. 6/11 3. Measurement Results Return Loss ONEWAVE TECHNOLOGY CO., LTD. 7/11 Radiation Pattern Efficiency Peak Gain Directivity 2400MHz 44.25 % 3.00 dBi 6.44 dBi 2450MHz 51.44 % 3.92 dBi 6.81 dBi 2500MHz 45.21 % 3.20 dBi 6.65 dBi Chamber Coordinate System Y Z X ONEWAVE TECHNOLOGY CO., LTD. 8/11 4.Reliability and Test Condictions ITEM REQUIREMENTS TEST CONDITION Solderability 1. Wetting shall exceed 90% coverage 2. No visible mechanical damage Pre-heating temperature:150°C/60sec. Solder temperature:230±5°C Duration:4±1sec. Solder:Sn-Ag3.0-Cu0.5 Flux for lead free: rosin Solder heat Resistance 1. No visible mechanical damage 2. Central Freq. change :within ± 6% 10 ± 0.5 sec. 60 sec . . T E M P ( °C ) 150 °C 2 6 0 °C Pre-heating temperature:150°C/60sec. Solder temperature:260±5°C Duration:10±0.5sec. Solder:Sn-Ag3.0-Cu0.5 Flux for lead free: rosin Component Adhesion (Push test) 1. No visible mechanical damage The device should be reflow soldered(230±5°C for 10sec.) to a tinned copper substrate A dynometer force gauge should be applied the side of the component. The device must with-ST-F 0.5 Kg without failure of the termination attached to component. Component Adhesion (Pull test) 1. No visible mechanical damage Insert 10cm wire into the remaining open eye bend ,the ends of even wire lengths upward and wind together. Terminal shall not be remarkably damaged. Thermal shock 1. No visible mechanical damage 2. Central Freq. change :within ±6% Phase Temperature(°C) Time(min) 1 +110±5°C 30±3 2 Room Temperature Within 3sec 3 -40±2°C 30±3 4 Room Temperature Within 3sec +110°C=>30±3min -40°C=>30±3min Test cycle:10 cycles The chip shall be stabilized at normal condition for 2~3 hours before measuring. Resistance to High Temperature 1. No visible mechanical damage 2. Central Freq. change :within ±6% 3. No disconnection or short circuit. Temperature: +110±5°C Duration: 1000±12hrs The chip shall be stabilized at normal condition for 2~3 hours before measuring. Resistance to Low Temperature 1. No visible mechanical damage 2. Central Freq. change :within ±6% 3. No disconnection or short circuit. Temperature:-40±5°C Duration: 1000±12hrs The chip shall be stabilized at normal condition for 2~3 hours before measuring. Humidity 1. No visible mechanical damage 2. Central Freq. change :within ±6% 3. No disconnection or short circuit. Temperature: 40±2°C Humidity: 90% to 95% RH Duration: 1000±12hrs The chip shall be stabilized at normal condition for 2~3 hours before measuring. 4±1 sec. 60sec TEMP (°C) 150°C 230°C ONEWAVE TECHNOLOGY CO., LTD. 9/11 5.Soldering and Mounting Mildly activated rosin fluxes are preferred. The minimum amount of solder can lead to damage from the stresses caused by the difference in coefficients of expansion between solder, chip and substrate. The terminations are suitable for all wave and re-flow soldering systems. If hand soldering cannot be avoided, the preferred technique is the utilization of hot air soldering tools. Recommended temperature profiles for re-flow soldering in Figure 1. Products attachment with a soldering iron is discouraged due to the inherent process control limitations. In the event that a soldering iron must be employed the following precautions are recommended. ‧Preheat circuit and products to 150°C ‧Never contact the ceramic with the iron tip ‧Use a 20 watt soldering iron with tip diameter of 1.0mm ‧280°C tip temperature (max) ‧1.0mm tip diameter (max) ‧Limit soldering time to 3 sec. SOLDERING COOLING NATURAL PRE-HEATING TEMPERATURE(°C) 60~120 s 10s max. 30~60s 250~260 230 180 150 TIME(sec.) Reflow Soldering SOLDERING COOLING NATURAL PRE-HEATING TEMPERATURE(°C) within 3s Gradual cooling 150 TIME(sec.) Iron Soldering Over 60s 350 300 ONEWAVE TECHNOLOGY CO., LTD. 10/11 6.Packaging Information ◆ Tape Specification: P2 F E P0 D0 P B0 W A0 K0 T W Ao Bo Ko P F E D D1 Po P2 t 12± 0.3 2.4± 0.1 2.6± 0.1 2.6± 0.1 8.0± 0.1 5.50± 0.1 1.75± 0.1 1.5± 0.1 1.5± 0.1 4.0± 0.1 2.0± 0.1 0.3± 0.05 ◆ Reel Specification: (7’’, Φ180 mm) Tape Width(mm) A(mm) B(mm) C(mm) D(mm) Chip/Reel(pcs) 12 12±1.0 60±2 13.5±0.5 178±2 700PCS 12 mm ONEWAVE TECHNOLOGY CO., LTD. 11/11 7.Storage and Transportation Information Storage Conditions To maintai…

Text truncated - open the document above for the full version.

Test Model No.: GIEC Z2001 Radiated Emission Left earphone Right earphone Conducted Emission