2AHYK-GIECZ3001True Wireless Earbuds

2023-03-08 R1:初始设计 2023-03-17 R2:内容文字变更 2023-03-23 R3:logo及内容文字变更 金蝶 513-1123-6001 Z3001 说明书_JK/R4 Z3001说明书/95x60mm/打钉/80g书纸/双色+双面印刷/骑马钉/Jk/R4 折页/80g书纸/双色印刷/骑马钉 折页/双色印刷/骑马钉 c 2.0 2023-05-15 R4:增加14页警告语 The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. L’appareil a été évalué pour répondre aux exigences générales en matière d’ exposition aux RF. L’appareil peut être utilisé en condition d’exposition portable sans restriction.

SHENZHEN GIEC DIGITAL CO., LTD Section 2.911(d)(7) USA Agent for Service of Process Company name: SHENZHEN GIEC DIGITAL CO., LTD Address: 1st&3rd Building, No.26 Puzai Road, Pingdi, Longgang District, Shenzhen, China Product Name: True Wireless Earbuds FCC ID: 2AHYK-GIECZ3001 Model: Z3001 2.911(d)(7) USA Designated Agent for Service of Process We, [SHENZHEN GIEC DIGITAL CO., LTD] designate [Baihetian Innovative Solutions] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent:We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation:We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email add ress for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: Baihetian Innovative Solutions Address: 6837 Chase Rd, Dearborn, MI 48126, USA FRN: 0033401605 Contact Name: Kenneth Young Telephone No: 313-395-3113 Email: [email protected] Applicant Company name: SHENZHEN GIEC DIGITAL CO., LTD Address: 1st&3rd Building, No.26 Puzai Road, Pingdi, Longgang District, Shenzhen, China FRN: 0025481136 Contact Name: Yan Wang Telephone No: +86-755-83479263 Email: [email protected] Signature: Title: Manager Signature: Title: Manager SHENZHEN GIEC DIGITAL CO., LTD Date: 2023-04-13 Date: 2023-04-13 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

SHENZHEN GIEC DIGITAL CO., LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023-04-13 FCC ID: 2AHYK-GIECZ3001 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Yan Wang Title: Certification Engineer

Test Model No.: Z3001

MODE NO.:Z3001 MODE NO.:Z3001

Test Model No.: Z3001

FCC ID: 2AHYK-GIECZ3001 RF Exposure evaluation According to 447498 D04 Interim General RF Exposure Guidance v01 ERP/EIRP = P T +G T −L C ERP/EIRP is the equivalent (or effective) radiated power [in same units as P T , typically dBW, dBm, or power spectral density (psd)], relative to either a dipole antenna (ERP) or an isotropic antenna (EIRP). P T is the transmitter output power, in dBW, dBm, or psd (power over a specified reference bandwidth). G T is the gain of the transmitting antenna, in dBd (ERP) or dBi (EIRP). L C is the signal attenuation in the connecting cable between the transmitter and the antenna, in dB. FCC ID: 2AHYK-GIECZ3001 BT EDR mode: Frequency (MHz) Output power to antenna (dBm) Ant gain(dBi) EIRP (dBm) ERP(dBm) ERP(mw) Distance(cm) P th (mW) 2441 3.75 2.16 5.91 3.76 2.38 0.5 2.8 ERP = EIRP −2.15 dB WORSE CASE 2.38mW<2.8mW BLE mode: Frequency (MHz) Output power to antenna (dBm) Ant gain(dBi) EIRP (dBm) ERP(dBm) ERP(mw) Distance(cm) P th (mW) 2440 1.36 2.16 3.52 1.37 1.37 0.5 2.8 ERP = EIRP −2.15 dB WORSE CASE 1.37mW<2.8mW Remark: Then SAR evaluation is not required

Report No.: GTS2023030508F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 1 of 14 AppendixA: DTS Bandwidth Test Result Test Mode Antenna Frequency[MHz] DTS BW [MHz] Limit[MHz] Verdict BLE_1M Ant1 2402 0.6739 0.5 PASS BLE_1M Ant1 2440 0.6717 0.5 PASS BLE_1M Ant1 2480 0.7109 0.5 PASS BLE_2M Ant1 2402 1.244 0.5 PASS BLE_2M Ant1 2440 1.208 0.5 PASS BLE_2M Ant1 2480 1.074 0.5 PASS Report No.: GTS2023030508F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 14 Test Graphs BLE_1M-Ant1-2402 BLE_1M-Ant1-2440 BLE_1M-Ant1-2480 BLE_2M-Ant1-2402 BLE_2M-Ant1-2440 BLE_2M-Ant1-2480 Report No.: GTS2023030508F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 14 AppendixB: Occupied Channel Bandwidth Test Result Test Mode Antenna Frequency[MHz] OCB [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict BLE_1M Ant1 2402 1.0322 2401.4765 2402.5087 --- --- BLE_1M Ant1 2440 1.0185 2439.4805 2440.4990 --- --- BLE_1M Ant1 2480 1.0538 2479.4643 2480.5181 --- --- BLE_2M Ant1 2402 2.0339 2400.9881 2403.0220 --- --- BLE_2M Ant1 2440 2.0365 2438.9864 2441.0229 --- --- BLE_2M Ant1 2480 2.0246 2478.9890 2481.0136 --- --- Report No.: GTS2023030508F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 4 of 14 Test Graphs BLE_1M-Ant1-2402 BLE_1M-Ant1-2440 BLE_1M-Ant1-2480 BLE_2M-Ant1-2402 BLE_2M-Ant1-2440 BLE_2M-Ant1-2480 Report No.: GTS2023030508F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 5 of 14 AppendixC: Maximum conducted output power Test Result Peak Test Mode Antenna Frequency[MHz] Conducted Peak Powert[dBm] Conducted Limit[dBm] Verdict BLE_1M Ant1 2402 0.64 ≤30 PASS BLE_1M Ant1 2440 1.26 ≤30 PASS BLE_1M Ant1 2480 0.76 ≤30 PASS BLE_2M Ant1 2402 0.68 ≤30 PASS BLE_2M Ant1 2440 1.36 ≤30 PASS BLE_2M Ant1 2480 0.93 ≤30 PASS Report No.: GTS2023030508F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 6 of 14 Test Graphs Peak BLE_1M-Ant1-2402 BLE_1M-Ant1-2440 BLE_1M-Ant1-2480 BLE_2M-Ant1-2402 BLE_2M-Ant1-2440 BLE_2M-Ant1-2480 Report No.: GTS2023030508F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 7 of 14 AppendixD: Maximum power spectral density Test Result Test Mode Antenna Frequency[MHz] Result[dBm/3kHz] Limit[dBm/3kHz] Verdict BLE_1M Ant1 2402 -15.89 ≤8.00 PASS BLE_1M Ant1 2440 -14.91 ≤8.00 PASS BLE_1M Ant1 2480 -15.63 ≤8.00 PASS BLE_2M Ant1 2402 -17.95 ≤8.00 PASS BLE_2M Ant1 2440 -17.04 ≤8.00 PASS BLE_2M Ant1 2480 -17.60 ≤8.00 PASS Report No.: GTS2023030508F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 8 of 14 Test Graphs BLE_1M-Ant1-2402 BLE_1M-Ant1-2440 BLE_1M-Ant1-2480 BLE_2M-Ant1-2402 BLE_2M-Ant1-2440 BLE_2M-Ant1-2480 Report No.: GTS2023030508F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 9 of 14 AppendixE:Band edge measurements Test Result Test Mode Antenna ChName Frequency[MHz] Ref Level[dBm] Result[dBm] Limit[dBm] Verdict BLE_1M Ant1 Low 2402 0.38 -48.48 ≤-19.62 PASS BLE_1M Ant1 High 2480 0.27 -47.98 ≤-19.73 PASS BLE_2M Ant1 Low 2402 -2.40 -32.65 ≤-22.4 PASS BLE_2M Ant1 High 2480 -2.05 -47.77 ≤-22.05 PASS Report No.: GTS2023030508F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 10 of 14 Test Graphs BLE_1M-Ant1-2402 BLE_1M-Ant1-2480 BLE_2M-Ant1-2402 BLE_2M-Ant1-2480 Report No.: GTS2023030508F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 11 of 14 AppendixG:Conducted Spurious Emission Test Result Test Mode Antenna Frequency[MHz] Freq Range [MHz] Ref Level [dBm] Result[dBm] Limit[dBm] Verdict BLE_1M Ant1 2402 0~Reference 0.53 0.53 --- PASS BLE_1M Ant1 2402 30~1000 0.53 -61.11 ≤-19.47 PASS BLE_1M Ant1 2402 1000~26500 0.53 -47.96 ≤-19.47 PASS BLE_1M Ant1 2440 0~Reference -0.33 -0.33 --- PASS BLE_1M Ant1 2440 30~1000 -0.33 -60.6 ≤-20.33 PASS BLE_1M Ant1 2440 1000~26500 -0.33 -46.99 ≤-20.33 PASS BLE_1M Ant1 2480 0~Reference -0.64 -0.64 --- PASS BLE_1M Ant1 2480 30~1000 -0…

Text truncated - open the document above for the full version.

Global United Technology Services Co., Ltd. Report No.: GTS2023030508F02 Authorized Signature: Robinson Luo Laboratory Manager This results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Page 1 of 33 TEST REPORT Applicant: SHENZHEN GIEC DIGITAL CO., LTD Address of Applicant: 1st&3rd Building, No.26 Puzai Road, Pingdi, Longgang District, Shenzhen, China Manufacturer: SHENZHEN GIEC DIGITAL CO., LTD Address of Manufacturer: 1st&3rd Building, No.26 Puzai Road, Pingdi, Longgang District, Shenzhen, China Factory: SHENZHEN JOWAY POWER SUPPLY CO., LTD Address of Factory: Building 11, antuoshan hi tech Industrial Park, Shaer community, Shajing street, Bao'an District, Shenzhen, China Equipment Under Test (EUT) Product Name: True Wireless Earbuds Model No.: Z3001 FCC ID: 2AHYK-GIECZ3001 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 Date of sample receipt: March 30, 2023 Date of Test: March 31, 2023-April 13, 2023 Date of report issued: April 13, 2023 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTS2023030508F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 33 2 Version Version No. Date Description 00 April 13, 2023 Original Prepared By: Date: April 13, 2023 Project Engineer Check By: Date: April 13, 2023 Reviewer Report No.: GTS2023030508F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 33 3 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 VERSION .................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................. 3 4 TEST SUMMARY ..................................................................................................................................... 4 5 GENERAL INFORMATION ...................................................................................................................... 5 5.1 GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 5.2 TEST MODE ........................................................................................................................................ 7 5.3 DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 7 5.4 DEVIATION FROM STANDARDS ............................................................................................................. 7 5.5 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................... 7 5.6 TEST FACILITY .................................................................................................................................... 7 5.7 TEST LOCATION ................................................................................................................................. 7 5.8 ADDITIONAL INSTRUCTIONS ................................................................................................................. 7 6 TEST INSTRUMENTS LIST ..................................................................................................................... 8 7 TEST RESULTS AND MEASUREMENT DATA .................................................................................... 10 7.1 ANTENNA REQUIREMENT ................................................................................................................... 10 7.2 CONDUCTED EMISSIONS ................................................................................................................... 11 7.3 CONDUCTED OUTPUT POWER ........................................................................................................... 14 7.4 CHANNEL BANDWIDTH ...................................................................................................................... 15 7.5 POWER SPECTRAL DENSITY ............................................................................................................. 16 7.6 SPURIOUS EMISSION IN NON-RESTRICTED & RESTRICTED BANDS ....................................................... 17 7.6.1 Conducted Emission Method ..................................................................................................... 17 7.6.2 Radiated Emission Method ........................................................................................................ 18 8 TEST SETUP PHOTO ............................................................................................................................ 33 9 EUT CONSTRUCTIONAL DETAILS ..................................................................................................... 33 Report No.: GTS2023030508F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 4 of 33 4 Test Summary Test Item Section in CFR 47 Result Antenna requirement 15…

Text truncated - open the document above for the full version.

Shenzhen Semiglead Electronics Co., Ltd [email protected] 2012 Chip Antenna For Bluetooth / WLAN Applications Dimension (mm) L2.0 ± 0.20 W1.2 ± 0.20 T0.25 ± 0.05 P/N: LTA212450-P2M 616, 6th Floor, Fengtian Building, South Side of East Ring 1st Road, Yousong Community, Longhua Street, Longhua District, Shenzhen, Shenzhen Semiglead Electronics Co., Ltd [email protected] Part Number Information LTA212450DP2M ABCDE AProduct SeriesAntenna BDimension L x W2.0×1.2 mm (±0.2mm) CFrequency2450MHZ DTypePIFA EProduct NameP2M 1. Electrical Specification Specification Part Number LTA212450-P2M Frequency2400~2500MHz Bandwidth90 (Min.)MHz Return Loss-10 (Max)dB Peak Gain2.16dBi Impedance50 Ω Operating Temperature -40～+85°C Maximum Power1W Resistance to Soldering Heats 10 ( @ 260 °C ) sec. PolarizationLinear Azimuth BeamwidthOmni-directional TerminationCu / Sn (Leadless) 616, 6th Floor, Fengtian Building, South Side of East Ring 1st Road, Yousong Community, Longhua Street, Longhua District, Shenzhen, Shenzhen Semiglead Electronics Co., Ltd [email protected] 2. Recommended PCB Pattern ( Unit : mm ) a.Evaluation Board Dimension b.Layout Dimensions in Clearance area（Size=5.0*4.0mm） 616, 6th Floor, Fengtian Building, South Side of East Ring 1st Road, Yousong Community, Longhua Street, Longhua District, Shenzhen, Shenzhen Semiglead Electronics Co., Ltd [email protected] 3. Suggested Matching Circuit 4. Measurement Results a. Return Loss 616, 6th Floor, Fengtian Building, South Side of East Ring 1st Road, Yousong Community, Longhua Street, Longhua District, Shenzhen, Shenzhen Semiglead Electronics Co., Ltd [email protected] b. Radiation Pattern XY-Plane TotalZY-Plane TotalZX-Plane Total Gain-PlaneEfficiency-Plane Frequency (MHz)240024502500 Efficiency (dB)-1.42-1.24-1.47 Efficiency (%)717571 Peak Gain (dBi)2.112.161.94 616, 6th Floor, Fengtian Building, South Side of East Ring 1st Road, Yousong Community, Longhua Street, Longhua District, Shenzhen, Shenzhen Semiglead Electronics Co., Ltd [email protected] 5.Reliability and Test Condictions ITEMREQUIREMENTSTEST CONDITION Solderability1. Wetting shall exceed 90% coverage 2. No visible mechanical damage Pre-heating temperature:150°C/60sec. Solder temperature:230±5°C Duration:4±1sec. Solder:Sn-Ag3.0-Cu0.5 Flux for lead free: rosin Solder heat Resistance 1. No visible mechanical damage 2. Central Freq. change :within ± 6% Pre-heating temperature:150°C/60sec. Solder temperature:260±5°C Duration:10±0.5sec. Solder:Sn-Ag3.0-Cu0.5 Flux for lead free: rosin Component Adhesion (Push test) 1. No visible mechanical damageThe device should be reflow soldered(230±5°Cfor 10sec.) to a tinned copper substrate A dynometer force gauge should be applied the side of the component. The device must with-ST-F 0.5 Kg without failure of the termination attached to component. Component Adhesion (Pull test) 1. No visible mechanical damage Insert 10cm wire into the remaining open eye bend ,the ends of even wire lengths upward and wind together. Terminal shall not be remarkably damaged. Thermal shock 1. No visible mechanical damage 2. Central Freq. change :within ±6% Phase Temperature( °C ) Time(min) 1 +85±5 °C 30±3 2 Room Temperature Within 3sec 3 -40±2°C 30±3 4 Room Temperature Within 3sec +85°C=>30±3min -40°C=>30±3min Test cycle:10 cycles The chip shall be stabilized at normal condition for 2~3 hours before measuring. Resistance to High Temperature 1. No visible mechanical damage 2. Central Freq. change :within ±6% 3. No disconnection or short circuit. Temperature: 85±5°C Duration: 1000±12hrs The chip shall be stabilized at normal condition for 2~3 hours before measuring. Resistance to Low Temperature 1. No visible mechanical damage 2. Central Freq. change :within ±6% 3. No disconnection or short circuit. Temperature:-40±5 °C Duration: 1000±12hrs The chip shall be stabilized at normal condition for 2~3 hours before measuring. Humidity 1. No visible mechanical damage 2. Central Freq. change :within ±6% 3. No disconnection or short circuit. Temperature: 40±2 °C Humidity: 90% to 95% RH Duration: 1000±12hrs The chip shall be stabilized at normal condition for 2~3 hours before measuring. 4±1 sec. 60sec TEMP (°C) 150°C 230°C 616, 6th Floor, Fengtian Building, South Side of East Ring 1st Road, Yousong Community, Longhua Street, Longhua District, Shenzhen, Shenzhen Semiglead Electronics Co., Ltd [email protected] 6.Soldering and Mounting Mildly activated rosin fluxes are preferred. The minimum amount of solder can lead to damage from the stresses caused by the difference in coefficients of expansion between solder, chip and substrate. The terminations are suitable for all wave and re-flow soldering systems. If hand soldering cannot be avoided, the preferred technique is the utilization of hot air soldering tools. Recommended temperature profiles for re-flow soldering in Figure 1. Products attachment with a soldering iron is discouraged due to the inherent process control limitations. In the event that a soldering iron must be employed the following precautions are recommended. ‧Preheat circuit and products to 150 °C ‧Never contact the ceramic with the iron tip ‧Use a 20 watt soldering iron with tip diameter of 1.0mm ‧280 °C tip temperature (max) ‧1.0mm tip diameter (max) ‧Limit soldering time to 3 sec. SOLDERING COOLING NATURAL PRE-HEATING TEMPERATURE(¢XC) 60~120 s 10s max. 30~60s 250~260 230 180 150 TIME(sec.) Reflow Soldering SOLDERING COOLING NATURAL PRE-HEATING TEMPERATURE(¢XC) within 3s Gradual cooling 150 TIME(sec.) Iron Soldering Over 60s 350 300 616, 6th Floor, Fengtian Building, South Side of East Ring 1st Road, Yousong Community, Longhua Street, Longhua District, Shenzhen, Shenzhen Semiglead Electronics Co., [email protected] 7.Packaging Information ◆Tape Specification: ◆Reel Specification: (7’’, Φ180 mm) Tape Width(mm)A(mm)B(mm)C(mm)D(mm)Chip/Reel(pcs) 89.0±0.560±213.5±0.5178±26000 616, 6th Floor…

Text truncated - open the document above for the full version.

Test Model No.: Z3001 Radiated Emission Conducted Emission