2AI7B-UVC01UVC disinfecting phone case with wireless charging

CONGRATULATIONS! You’ve purchased the finest in consumer UV light disinfection technology with your new OttLite ® product. LIMITED WARRANTY Thank you for purchasing your new OttLite ® product. To ensure your complete satisfaction, please save this warranty and your purchase receipt. OttLite ® UVC products carry a two-year limited parts and labor warranty. To obtain service or shipping address simply call 1-800-842-8848 or email [email protected]. An OttLite customer service representative will assist you. If it is necessary to return your OttLite product, they will provide you with a Return Authorization Number (RMA). In this event, please return the complete unit with proof of purchase. If after 90 days, please include payment of $9.90 (U.S. Dollars) to cover return postage and handling costs. Returns without an RMA number will not be accepted. Alterations to OttLite ® products may result in voiding this warranty. This limited warranty is provided in lieu of any other warranties, obligations or liabilities expressed or implied including, but not limited to, any expressed or implied warranty of merchantability and shall be limited to the duration of this written limited warranty. Some countries and some individual states in the United States of America do not allow limitations as to how long an implied warranty lasts, so the above limitations may not apply to you. OttLite ® shall not be liable to the purchaser, or any other person for any incidental or consequential damages or loss of profits arising from the use of, or any defect in, or malfunction or failure of the product. Some countries and some individual states in the United States of America do not allow the exclusion or limitation of incidental or consequential damages and these limitations may not apply to you. Only OttLite ® may change, amend or modify the terms of this limited warranty and those changes, amendments or modifications must be in writing to be binding on OttLite ® . To prevent risk of fire never use the OttLite ® product on a dimming circuit. This Limited Warranty gives you specific legal rights. You may also have other rights, which vary from state to state in the United States of America and from country to country. NOTE: The important safety instructions appearing in this instruction sheet are not meant to cover all possible conditions and situations that may occur. It must be understood that common sense, caution, and care must be used with any electrical product. Do not expose skin or eyes to the UV-C light. UV-C can cause skin burns and eye inflamation. This product should not be used by children. Not intended for use on food. For indoor use only. Do not expose to fire, rain, moisture or wet areas. Do not expose to heat. NOTE: THIS UNIT IS FULLY ASSEMBLED AND INCLUDES NO USER SERVICEABLE PARTS INSTRUCTIONS FOR DISINFECTION: 1. Plug the AC adaptor (A) into a standard 120V wall outlet (B) and insert the DC plug (C) into the port (D) on the back of the product. 2. Open the lid and insert the items you wish to disinfect such as a smartphone, keys or glasses then close the lid. 3. Pressing the button once will set the timer for 10 minutes and a green indicator light will come on, pressing it again will set it for 30 minutes and the indicator light will change to blue. The case will make an audible beep and automatically turn off when process is complete. INSTRUCTIONS FOR WIRELESS CHARGING: Place your wireless charging compatible device such as a smartphone or tablet face up on top of the closed case lid. When properly centered the device will begin to charge and the charging indicator light will come on. Note that charging times vary with different devices and not all devices are compatible with wireless charging. ENGLISH Disinfecting Phone Case with Wireless Charging A Disinfecting Phone Case with Wireless Charging UV024WXM UVC-01 INS200586 REV072420 B E UV WARNING UV Light Hazard Avoid eye and skin exposure This product is not intended to be used by children UV DANGER UV Light Hazard Avoid eye and skin exposure This product is not intended to be used by children Night Light Wireless charger Wireless charger indicator 10 or 30 minute disinfection setting Night light On / Off level adjustment C D Check the charge level on your device periodically to determine when it is fully charged. NOTE: Product DOES NOT provide any indication of when device is fully charged. INSTRUCTIONS FOR NIGHT LIGHT: Pressing the button once will turn on the night light. Pressing it again will reduce the brightness. Pressing it a 3rd time will turn it off. INSTRUCTIONS FOR ESSENTIAL OIL DIFFUSER Place ONE drop of essential oil (not included) into the diffusing area (E) prior to starting disinfection. CAUTION! ITS END OF LIFE THE WHOLE PRODUCT SHALL BE REPLACED. CAUTION: Any change or modification to product not expressly recognized by OttLite Technologies voids OttLite’s responsibility for proper function of product. FCC PART 15 Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the…

Text truncated - open the document above for the full version.

1(2) Ottlite Technologies Inc Attention: Certification reviewer RE: Request for Confidentiality FCC ID: 2AI7B-UVC01 To Whom It May Concern: Permanent Confidentiality [Complete this section if permanent confidentiality is requested] Request to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential: [Select one or more of items below, as appropriate] Schematics Block Diagrams Operational Description Tune-up Procedure Parts List Internal Photos (see note) Users Manual (see note) Note 1: Internal Photos may be held confidential 1) if the circuit board or internal components are not accessible to users. For example, it is acceptable if the circuit board is enclosed in epoxy. 2) Also, it is acceptable if the device is not accessible to the public, for example, a device mounted on the top of a large tower (or in a fenced enclosure) such that it is only serviceable by professional designated technicians under a Non-Disclosure Agreement (NDA). All sales for these devices must be under a NDA restricting the disclosure of the propriety information, including internal photos. Users Manual may be held confidential only when the manual contains proprietary technical information intended for professional technicians obligated under a NDA. All sales and distribution of the user’s manual must be under a NDA that restricts the disclosure of the information. In the application cover letter requesting permanent confidentiality the following additional description and the NDA exhibit is required: 1.Describe in detail how internal photos and/or users manual information are controlled to prevent them from becoming public or disclosed to unauthorized persons. 2.Describe how public access is restricted for products serviceable by professional designated technicians. 3.A statement that all sales of the non-consumer device will be under a NDA to include third party sales and that the final user of the device is subject to the NDA. 4.Provide an example of the NDA between the grantee and a purchaser. The request for confidentiality must Note 2: For scanning receiver, the schematics, block diagrams, operational description, tune-up procedure, parts list and internal photos are always held permanently confidential. Short-term Confidentiality [Complete this section if short-term confidentiality is requested] Request to withhold from public review for a period of [please enter 1 to 180] days from the date of the Grant of Equipment Authorization and prior to marketing, certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept short-term confidential for a period above from the date of the grant [Select one or more of items below that are not selected in the list above, as appropriate] Schematics Block diagrams Operational Description Tune-up Procedure 2(2) Parts List Test Setup Photos External Photos Internal Photos Users Manual Rationale for request for confidentiality: We have invested considerable time and materials in research and development to produce the referenced product. Permanent confidentiality: Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. Short-term confidentiality: Disclosure of the short-term confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development. If you have questions or need further information, please contact the undersigned. Sincerely, _________________ Kyle Albinus Quality Manager 2020/8/8

CAN ICES-005(B)/NMB-005(B) et(2) Cet appareil doit accepter toute interférence reçue,y compris les interferences pouvant entraîner son dysfonctionnement. Son utilisation est assujettie aux deux conditions suivantes :(1) Cet appareil ne doit pas causer d’interférences nuisibles, Cet appareil est conforme aux exigences de la Section 15 des règles de la Commission fédérale des communications (FCC). including interference that may cause undesired operation. (1) this device may not cause harmful interference, and(2) this device must accept any interference received, This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: INDOOR USE ONLY BATCH NO/LOT NO.7314 (UV024WXM) 08 2020 FCC ID: 2AI7B-UVC01 IC:21754-UVC01 Size: 60*20mm ： MODEL UVC-01 INPUT DC 9V 2A 1715 N Westshore Blvd Suite 950,Tampa,FL 33607 USA Size: 45*30mm

OttLite Technologies, Inc. TEST REPORT SCOPE OF WORK SAR Assessment– UVC-01 REPORT NUMBER 200806035SZN-002 ISSUE DATE [REVISED DATE] 27 August 2020 [--------------------] PAGES 6 DOCUMENT CONTROL NUMBER RF Exposure © 2017 INTERTEK TEST REPORT Intertek No.: 200806035SZN-002 This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Services Shenzhen Ltd. Longhua Branch 101, 201, Building B, No. 308 Wuhe Avenue, Zhangkengjing Community, GuanHu Subdistrict, LongHua District, ShenZhen. Tel: (86 755) 8601 6288 Fax: (86 755) 8601 6751 Version: 01-November-2017 Page 1 of 6 RF Exposure 101, 201, Building B, No. 308 Wuhe Avenue, Zhangkengjing Community, GuanHu Subdistrict, LongHua District, ShenZhen. Tel: (86 755) 8601 6288 Fax: (86 755) 8601 6751 www.intertek.com Test Report Applicant : OttLite Technologies, Inc. 1715 N Westshore Blvd STE 950 Tampa, FL 33607 United States Sample Description Product : UVC disinfecting phone case with wireless charging Model No. : UVC-01 Brand Name : Electrical Rating : Input: DC 9V, 2.0A from adapter Wireless charging output: DC5V, 1A or DC 9V, 1.1A Date Received : 06 August 2020 Date Test Conducted : 06 August 2020 to 25 August 2020 Test Requested : Test for compliance with CFR 47 part 1 Test Method : Environmental evaluation and exposure limit according to FCC CFR 47 part 1, 1.1307(c) and (d), 1.1310 Test Result : Pass Conclusion : When determining of test conclusion, measurement uncertainty of tests have been considered. ******************************** End of Page ******************************** Prepared and Checked By: Approved By: Jeff Liang Kidd Yang Engineer Technical Supervisor Date: 27 August 2020 TEST REPORT Intertek No.: 200806035SZN-002 Version: 01-November-2017 Page 2 of 6 RF Exposure Test Report Test Setup Configuration Note - The RF exposure test is performed in the shield room. - The test distance is between the edge of the charger and the geometric centre of probe. Test Equipment List Name of instrument Model Manufacturer Cal. Date Due Date Electric and Magnetic Field Analyzer EHP-200A Narda 2020-08-03 2021-08-03 TEST REPORT Intertek No.: 200806035SZN-002 Version: 01-November-2017 Page 3 of 6 RF Exposure Reference Limit: Environmental evaluation and exposure limit according to FCC CFR 47 part 1, 1.1307(c) and (d), 1.1310 According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation. LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range ( MHz ) Electric Field strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) (A) Limits for Occupational/Controlled Exposure 0.3 – 3.0 614 1.63 (100) * 6 (B) Limits for General Population/Uncontrolled Exposure 0.3 – 1.34 614 1.63 (100) * 30 Note: * = Plane wave equivalent power density Test Result: H-Field Strength at 15 cm surrounding the EUT and 20cm above the top surface of the EUT Frequency Range (MHz) EUT Operation mode Probe Position Front (A/m) Probe Position Rear (A/m) Probe Position Left (A/m) Probe Position Right (A/m) Probe Position Top (A/m) Limits (A/m) 0.110- 0.205 1% Battery Level 0.0568 0.0614 0.0568 0.0614 0.0580 1.63 0.110- 0.205 50% Battery Level 0.0568 0.0614 0.0568 0.0614 0.0568 1.63 0.110- 0.205 99% Battery Level 0.0614 0.0568 0.0568 0.0614 0.0614 1.63 0.110- 0.205 Stand-by 0.0568 0.0614 0.0568 0.0568 0.0568 1.63 E-Field Strength at 15 cm surrounding the EUT and 20cm above the top surface of the EUT Frequency Range (MHz) EUT Operation mode Probe Position Front (V/m) Probe Position Rear (V/m) Probe Position Left (V/m) Probe Position Right (V/m) Probe Position Top (V/m) Limits (V/m) 0.110- 0.205 1% Battery Level 0.5798 0.4851 0.4851 0.6078 0.6078 614 0.110- 0.205 50% Battery Level 0.5765 0.4815 0.4813 0.6012 0.6048 614 0.110- 0.205 99% Battery Level 0.5786 0.4815 0.4825 0.6085 0.6085 614 0.110- 0.205 Stand-by 0.5752 0.4856 0.4831 0.6082 0.6089 614 TEST REPORT Intertek No.: 200806035SZN-002 Version: 01-November-2017 Page 4 of 6 RF Exposure Configuration photo of the test: H-Field & E-Field Strength test photos Front Rear TEST REPORT Intertek No.: 200806035SZN-002 Version: 01-November-2017 Page 5 of 6 RF Exposure Left Right TEST REPORT Intertek No.: 200806035SZN-002 Version: 01-November-2017 Page 6 of 6 RF Exposure Top ****************************** End of Report******************************

Ottlite Technologies Inc. TEST REPORT SCOPE OF WORK FCC TESTING–UVC-01 REPORT NUMBER 200806035SZN-001 ISSUE DATE [REVISED DATE] 27 August 2020 [--------------------] PAGES 19 DOCUMENT CONTROL NUMBER FCC ID 209_b © 2017 INTERTEK 101, 201, Building B, No. 308 Wuhe Avenue, Zhangkengjing Community, GuanHu Subdistrict, LongHua District, ShenZhen. Tel: (86 755) 8601 6288 Fax: (86 755) 8601 6751 www.intertek.com Test Report Intertek Report No.: 200806035SZN-001 This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Services Shenzhen Ltd. Longhua Branch 101, 201, Building B, No. 308 Wuhe Avenue, Zhangkengjing Community, GuanHu Subdistrict, LongHua District, ShenZhen. Tel: (86 755) 8601 6288 Fax: (86 755) 8601 6751 Version: 01-November-2017 Page: 1 of 19 FCC ID 209_b Ottlite Technologies Inc. Application For Certification FCC ID: 2AI7B-UVC01 UVC disinfecting phone case with wireless charging Model: UVC-01 Brand name: Transmitter Report No.: 200806035SZN-001 We hereby certify that the sample of the above item is considered to comply with the requirements of FCC Part 15, Subpart C for Intentional Radiator, mention 47 CFR [ 10-1-19] Prepared and Checked by: Approved by: Jeff Liang Kidd Yang Engineer Technical Supervisor Date: 27 August 2020 Test Report Intertek Report No.: 200806035SZN-001 Version: 01-November-2017 Page: 2 of 19 FCC ID 209_b MEASUREMENT/TECHNICAL REPORT This report concerns (check one) Original Grant X Class II Change Equipment Type: DCD - Part 15 Low Power Transmitter Below 1705 kHz Deferred grant requested per 47 CFR 0.457(d)(1)(ii)? Yes No X If yes, defer until: date Company Name agrees to notify the Commission by: date of the intended date of announcement of the product so that the grant can be issued on that date. Transition Rules Request per 15.37? Yes No X If no, assumed Part 15, Subpart C for intentional radiator - the new 47 CFR [10-01-19] Edition] provision. Report prepared by: Jeff Liang Intertek Testing Services Shenzhen Ltd. Longhua Branch 101, 201, Building B, No. 308 Wuhe Avenue, Zhangkengjing Community, GuanHu Subdistrict, LongHua District, ShenZhen. Tel: (86 755) 8614 0743 Fax: (86 755) 8601 6751 Test Report Intertek Report No.: 200806035SZN-001 Version: 01-November-2017 Page: 3 of 19 FCC ID 209_b Table of Contents 1.0 Summary of Test Results ..................................................................................... 4 2.0 General Description .............................................................................................. 5 2.1 Product Description .............................................................................................. 5 2.2 Related Submittal(s) Grants ................................................................................. 5 2.3 Test Methodology ................................................................................................ 5 2.4 Test Facility ......................................................................................................... 5 3.0 System Test Configuration ................................................................................... 6 3.1 Justification ......................................................................................................... 6 3.2 EUT Exercising Software ..................................................................................... 6 3.3 Special Accessories ............................................................................................. 6 3.4 Equipment Modification ........................................................................................ 6 3.5 Measurement Uncertainty .................................................................................... 7 3.6 Support Equipment List and Description ............................................................. 7 4.0 Measurement Results ........................................................................................... 8 4.1 Field Strength Calculation .................................................................................... 8 4.2 Radiated Emission Configuration Photograph .................................................... 9 4.3 Radiated Spurious Emission ................................................................................ 9 4.4 Conducted Emission Configuration Photograph ................................................. 12 4.5 Conducted Emission.......................................................................................... 12 5.0 Equipment Photographs .................................................................................... 15 6.0 Product Labelling ................................................................................................ 15 7.0 Technical Specifications .................................................................................... 15 8.0 Instruction Manual .............................................................................................. 15 9.0 Miscellaneous Information ................................................................................. 16 9.1 20dB Bandwidth .....................................…

Text truncated - open the document above for the full version.

Front View Back View

Front View Side View