2AIHD1041HW-IG41

! Industri!l Controller IG41 Datasheet OVERVIEW The Samsara IG"! combines the power of a PLC and flexibility of an IoT gateway for control and data collection across industrial operations. With built-in connectivity, modular and wireless I/O, data storage, and dual processing, the IG"! can be deployed in a fraction of the time compared to traditional PLCs. The IG"! seamlessly connects to the Samsara cloud where you can easily build custom dashboards, alerts, and reports. View real-time data down to the second and track key performance indicators over time, whether you’re in the control room, board room, or out in the field. HIGHLIGHTS Modular design Up to 8 stackable modules supporting up to 64 analog inputs, 128 digital inputs and outputs, and 32 analog outputs Wireless IO Out-of-the-box support for long range wireless IO module WM!! to connect remote assets Dual processing Dual CPU for low latency data transmission and local control program execution Flexible connectivity Dual SIM for AT&T and Verizon, built in Ethernet, RS-"#$/%&%, USB, CAN, and more. TENTATIVE % IG41 Industrial Controller ENCLOSURE Dimensions (WxHxD) 100 mm x 86 mm x 102 mm Weight 0.68 kg (1.5 lbs) Mounting DIN-rail, Wall mount System LED LED State Indicates Blinking Green Establishing connectivity Solid Green Connected to the Samsara Cloud Blinking Red Device is starting up Solid Red Critical error - contact Samsara support Blinking Blue PLC program running RS-!"!/RS-#$% LED LED State Indicates Solid Orange RS%&% device configured Solid Blue RS"#$ device configured CAN LED LED State Indicates Solid Blue CAN configured ENVIRONMENTAL Operating temperature -30°C to +70°C (-22°F to +158°F) Storage temperature -40°C to +85°C (-40°F to +185°F) Operating humidity 10% RH to 90% RH, noncondensing Storage humidity 5% RH to 95% RH, noncondensing Ingress protection IP%' TENTATIVE & IG41 Industrial Controller POWER Power requirement 10-28 VDC Typical power consumption 8 W nominal Maximum power consumption 36 W SHOCK & VIBRATION Free fall IEC (''(#-%-&% (Freefall) Operating shock IEC (''(#-%-%), half-sine wave, &'G !!ms, 18 shocks IEC (''(#-%-%), half-sine wave, $'G &ms, 18 shocks Operating vibration IEC (''(#-%-(", 5~500 Hz, $Grms, 30 min/axis, total 90 min IEC (''(#-%-(, 10~500 Hz, $G, 30 min/axis, total 90 min SAFETY, HAZARDOUS LOCATIONS, & COMPLIANCE* Hazardous locations US (UL) • Class I, Division 2, Groups A, B, C, D, Temperature Class T" • Class I, Zone 2, Group IIC Safety & hazardous • UL/IEC (!'!'-! (Safety) locations standards • UL/IEC (!'!'-%-%'! (Safety) • UL !%!%'!, CSA C%%.%#%!& (Hazardous Locations) Electromagnetic compatibility • FCC ") CFR Part !$B, Class A • ICES-''& (ITE) Note: In the United States (per FCC ") CFR), Class A equipment is intended for use in commercial, light-industrial, and heavy-industrial locations. In Europe, Canada, Australia and New Zealand (per CISPR !!) Class A equipment is intended for use only in heavy-industrial locations. For use in hazardous locations, device needs to be installed in a tool secured NEMA "X enclosure. *pending certifications TENTATIVE " IG41 Industrial Controller PROCESSING & STORAGE Data storage Stores 1 week of data across 50 registers sampling on a per second basis and transmits data to the cloud for unlimited cloud storage within duration of contract. Internal real-time clock Deviation per month, max: 25 s/month at 25 °C Note: Maintenance-free supercapacitor. During power failures, it maintains the time in the clock for at least seven days. Programming languages IEC (!!&!-& structured text, ladder logic coming soon NETWORK/ETHERNET Number of ports 2 Network interface !'Base-T, 1''Base-TX, and 10''Base-T Ethernet Compatibility IEEE #'%.& Communication rates 10 Mbps, 100 Mbps, 1000 Mbps auto-negotiated Connector RJ"$ Ethernet protocols EthernetIP, Modbus TCP, ROC TCP WIFI WAN connectivity WiFi: 802.11 a/b/g/n/ac WiFi/WLAN client for remote connection Frequencies supported 1×1 2.4/5 GHz Security WPA%, WPA Antenna connector RP-SMA male connector TENTATIVE $ IG41 Industrial Controller CELLULAR "G Frequencies WCDMA B%/B$ #G Frequencies CAT " LTE B%/"/$/!%/!& Carrier support AT&T, Verizon (coming soon) Antenna connector 2x SMA female connector LORAWAN Frequency 915 MHz Antenna connector 1x SMA female connector LOW ENERGY WIRELESS Compatibility Works with up to 12 Samsara proprietary low-energy wireless sensors Range 2."GHz: 30m (line of sight) RS!"#" Number of ports 1 configurable between 232/485 Port type 3-pin screw terminal Maximum baud rate 115,200 bps Data bits 5, 6, 7, 8 Stop bits 1, 2 Parity Odd, Even, None Flow control XON/XOFF Voltage level ±9 V Serial protocols Modbus RTU, Modbus ASCII, ROC RTU TENTATIVE ( IG41 Industrial Controller RS!$%& Number of ports 1 configurable between 232/485 Port type 3-pin screw terminal Maximum baud rate 115,200 bps Data bits 5, 6, 7, 8 Stop bits 1, 2 Parity Odd, Even, None Flow control XON/XOFF Wire mode 2-wire, Half-duplex Voltage level 0-5 V Serial protocols Modbus RTU, Modbus ASCII, ROC RTU CAN Max baud rate 1 Mbps CAN termination So+tware configurable 120 Ohm termination Standard compatibility ISO !!#,#-% USB Number of ports 2 Type USB %.' Type A Max current per port 1.5 A GPS GNSS Supports GPS L!, GLONASS L!, and Galileo Antenna connection 1x SMA - female external active antenna required TENTATIVE ) IG41 Industrial Controller FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equip…

Text truncated - open the document above for the full version.

Letter of Authorization (Proxy Type 2) Date: Oct. 12, 2020 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern: We, the undersigned, hereby authorize the following person to act on our behalf in all matters relating to application for Federal Communication Commision radio equipment authorization. International Certification Corp. Address : No.3-1, Lane 6, Wen San 3rd St. Kwei Shan Dist., TaoYuan City 333, Taiwan (R.O.C.) Name : Gary Chang Job Title : Manager E-mail : [email protected] We further certify that neither the applicant nor any party to this application, as defined in 47 C.F.R. 1.2002(b), is subject to a denial of Federal benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862. This appointment also includes authority to complete FCC Form 731 on our behalf and sign as an authorized agent for the purposes of this application. FCC ID: 2AIHD1041 Product(s): HW-IG41 Signature: Benjamin Calderon Executive Vice President, Hardware Engineering and Operations Samsara Network, Inc. 1990 Alameda Street, San Francisco, CA 94103 Tel: +1 (415) 985-2400 Email: [email protected] DocuSign Envelope ID: 556D2B31-3F40-414C-96A3-799234D596B4 10/20/2020

Confidentiality Request Letter Date: Oct. 12, 2020 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request FCC ID: 2AIHD1041 To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s rules, we hereby request confidential treatment for the following attachments to this application as outlined below: ☒ Block Diagram ☒ Schematics ☒ Theory of Operation ☒ Bill of Materials ☒ Tune up procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Further, pursuant to DA 04-1705 of the Commission’s public notice, in order to comply with the marketing regulations in 47CFR §2.803 and the importation rules in 47 CFR §2.1204 while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after the grant date: ☒ Internal Photographs ☒ External Photographs ☒ User Manual ☒ Test Setup Photographs The applicant understands that pursuant to Section 0.457 of the rules, disclosure of this application and all accompanying documentation will not be made prior to the grant of equipment authorization. Signature: Benjamin Calderon Executive Vice President, Hardware Engineering and Operations Samsara Network, Inc. 1990 Alameda Street, San Francisco, CA 94103 Tel: +1 (415) 985-2400 Email: [email protected] DocuSign Envelope ID: 556D2B31-3F40-414C-96A3-799234D596B4 10/20/2020

Professional Installation Attestation Date: October 12, 2020 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Professional Installation Attestation FCC ID: 2AIHD1041 To Whom It May Concern: Please be advised that due to the unique Market and function targeted by this product [HW-IG41, FCC ID: 2AIHD1041], this product will need special trained professional in configuring and installing the product. We hereby declare that the product will be distributed through controlled distribution channel which has special trained professional to install this product and will not be sold directly to the general public through retail store. Thank you for your attention. Signature: Benjamin Calderon Executive Vice President, Hardware Engineering and Operations Samsara Network, Inc. 1990 Alameda Street, San Francisco, CA 94103 Tel: +1 (415) 985-2400 Email: [email protected] DocuSign Envelope ID: 556D2B31-3F40-414C-96A3-799234D596B4 10/20/2020

Project No.: EP090103 Page No. : 1 of 14 Photographs of EUT Project No.: EP090103 Page No. : 2 of 14 Project No.: EP090103 Page No. : 3 of 14 Project No.: EP090103 Page No. : 4 of 14 Project No.: EP090103 Page No. : 5 of 14 Project No.: EP090103 Page No. : 6 of 14 Project No.: EP090103 Page No. : 7 of 14 Project No.: EP090103 Page No. : 8 of 14 Project No.: EP090103 Page No. : 9 of 14 Project No.: EP090103 Page No. : 10 of 14 Project No.: EP090103 Page No. : 11 of 14 Project No.: EP090103 Page No. : 12 of 14 Project No.: EP090103 Page No. : 13 of 14 Project No.: EP090103 Page No. : 14 of 14

Vulcan_System_Serial_Engraving_04 RevUpdatesDate 01Initial release20200615 02Updated20200730 03Moved QR code 0.3mm20200806 04Updated main boody engraving20200817 Page 1 of 3 Vulcan_System_Serial_Engraving_04 Serial number is dynamic, all other information is static Font is Helvetica Neue Text height 1.6mm Laser Etch Power: TBD Laser Etch Speed: TBD Frequency: TBD Full engravingDynamic information RS232 RS485 CAN WIFI / BT USB 2.0 915 MHz GPS LTE AUX 10-28V GND GND GND WWWW-WWW-WWWWWWW-WWW-WWW LAN1 LAN2 LTE MAIN 7mm 1mm Main Front Page 2 of 3 Vulcan_System_Serial_Engraving_04 QR code measures 7x7mm QR code reads serial number “1234-567-890” Laser Etch Power: TBD Laser Etch Speed: TBD Frequency: TBD Dynamic information 20.8mm 59mm Main Body Page 3 of 3 Vulcan_System_Serial_Engraving_04 Full engraving Samsara IG41 IC: 21492-1041 FCC ID: 2AIHD1041 Made in Taiwan Model: 010-1041 CAN ICES-3(B)/NMB-3(B) Input: 10-28V This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Main Body

Project No.: EP090103 Page No. : 1 of 12 Photographs of EUT Project No.: EP090103 Page No. : 2 of 12 Project No.: EP090103 Page No. : 3 of 12 Project No.: EP090103 Page No. : 4 of 12 Project No.: EP090103 Page No. : 5 of 12 Project No.: EP090103 Page No. : 6 of 12 Project No.: EP090103 Page No. : 7 of 12 Project No.: EP090103 Page No. : 8 of 12 Project No.: EP090103 Page No. : 9 of 12 Project No.: EP090103 Page No. : 10 of 12 Project No.: EP090103 Page No. : 11 of 12 Project No.: EP090103 Page No. : 12 of 12

Report No.: FA090103 Page : 1 of 6 Report Version: Rev. 01 FCC RF Exposure Report FCC ID : 2AIHD1041 Equipment : HW-IG41 Model No. : 010-1041 Brand Name : Samsara Applicant : Samsara Networks Inc. Address : 1990 Alameda Street, San Francisco, CA 94103, United States Standard : 47 CFR FCC Part 2.1091 Received Date : Sep. 01, 2020 Tested Date : Sep. 14 ~ Sep. 30, 2020 We, International Certification Corp., would like to declare that the tested sample has been evaluated and in compliance with the requirement of the above standards. The test results contained in this report refer exclusively to the product. It may be duplicated completely for legal use with the approval of the applicant. It shall not be reproduced except in full without the written approval of our laboratory. Reviewed by: Approved by: Along Chen / Assistant Manager Gary Chang / Manager Report No.: FA090103 Page : 2 of 6 Report Version: Rev. 01 Table of Contents 1 MPE EVALUATION OF MOBILE DEVICES ......................................................................................... 4 1.1 LIMITS FOR GENERAL POPULATION/UNCONTROLLED EXPOSURE............................................. 4 1.2 MPE EVALUATION FORMULA ............................................................................................................. 4 1.3 DEVIATION FROM TEST STANDARD AND MEASUREMENT PROCEDURE ................................... 4 1.4 MEASUREMENT UNCERTAINTY ......................................................................................................... 4 1.5 MPE EVALUATION RESULTS .............................................................................................................. 5 2 TEST LABORATORY INFORMATION ................................................................................................. 6 Report No.: FA090103 Page : 3 of 6 Report Version: Rev. 01 Release Record Report No. Version Description Issued Date FA090103 Rev. 01 Initial issue Oct. 20, 2020 Report No.: FA090103 Page : 4 of 6 Report Version: Rev. 01 1 MPE EVALUATION OF MOBILE DEVICES 1.1 LIMITS FOR GENERAL POPULATION/UNCONTROLLED EXPOSURE Frequency Range (MHz) Power Density (mW /cm 2 ) Averaging Time (minutes) 300~1500 F/1500 30 1500~100000 1.0 30 1.2 MPE EVALUATION FORMULA Pd = 2 **4RPi Pt Where Pd= Power density in mW/cm 2 Pt= EIRP in mW Pi= 3.1416 R= Measurement distance 1.3 DEVIATION FROM TEST STANDARD AND MEASUREMENT PROCEDURE None 1.4 MEASUREMENT UNCERTAINTY The measurement uncertainties given below are based on a 95% confidence level (based on a coverage factor (k=2)). Parameters Uncertainty Conducted power ±0.808 dB Declaration of Conformity: The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. Comments and Explanations: The declared of product specification for EUT presented in the report are provided by the manufacturer, and the manufacturer takes all the responsibilities for the accuracy of product specification. Report No.: FA090103 Page : 5 of 6 Report Version: Rev. 01 1.5 MPE EVALUATION RESULTS Frequency Range (MHz) Maximum Conducted Power (dBm) Rated Power (dBm) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) *Ratio Pass / Fail 2412~2462 (Wi-Fi) 21.85 22.0 2.7 20 0.059 1 0.059 Pass 5180~5240 (Wi-Fi) 18.79 19.0 6.23 20 0.066 1 0.066 Pass 5745~5825 (Wi-Fi) 18.39 18.5 6.23 20 0.059 1 0.059 Pass 2402~2480 (BT-LE) 9.12 9.5 2.7 20 0.003 1 0.003 Pass 923.3~927.5 (LoRa) 23.75 24.0 2.3 20 0.085 0.616 0.138 Pass 1850~1910 (LTE B2) 22.86 23 8.13 20 0.258 1 0.258 Pass 824~849 (LTE B5) 22.46 22.5 5.79 20 0.134 0.549 0.244 Pass 699~716 (LTE B12) 22.28 22.5 6.79 20 0.169 0.466 0.363 Pass 777~787 (LTE B13) 22.65 22.5 6.79 20 0.169 0.518 0.326 Pass *Ratio = Power density / Limit. Frequency Range (MHz) EIRP(dBm) Rated Power (dBm) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) *Ratio Pass / Fail 1710~1755 (LTE B4) 28.95 29 20 0.158 1 0.158 Pass Report No.: FA090103 Page : 6 of 6 Report Version: Rev. 01 2 Test laboratory information Established in 2012, ICC provides foremost EMC & RF Testing and advisory consultation services by our skilled engineers and technicians. Our services employ a wide variety of advanced edge test equipment and one of the widest certification extents in the business. International Certification Corp (EMC and Wireless Communication Laboratory), it is our definitive objective is to institute long term, trust-based associations with our clients. The expectation we set up with our clients is based on outstanding service, practical expertise and devotion to a certified value structure. Our passion is to grant our clients with best EMC / RF services by oriented knowledgeable and accommodating staff. Our Test sites are located at Linkou District and Kwei Shan District. Location map can be found on our website http://www.icertifi.com.tw. Linkou Kwei Shan Kwei ShanSite II Tel: 886-2-2601-1640 Tel: 886-3-271-8666 Tel: 886-3-271-8640 No. 30-2, Ding Fwu Tsuen, Lin Kou District, New Taipei City, Taiwan, R.O.C. No. 3-1, Lane 6, Wen San 3rd St., Kwei Shan District, Tao Yuan City 333, Taiwan, R.O.C. No. 14-1, Lane 19, Wen San 3rd St., Kwei Shan District, Tao Yuan City 333, Taiwan, R.O.C.. If you have any suggestion, please feel free to contact us as below information Tel: 886-3-271-8666 Fax: 886-3-318-0155 Email: [email protected] ══END══

Report No.: FR090103AN Page : 1 of 127 Report Version: Rev. 01 FCC Test Report FCC ID : 2AIHD1041 Equipment : HW-IG41 Model No. : 010-1041 Brand Name : Samsara Applicant : Samsara Networks Inc. Address : 1990 Alameda Street, San Francisco, CA 94103, United States Standard : 47 CFR FCC Part 15.407 Received Date : Sep. 01, 2020 Tested Date : Sep. 14 ~ Sep. 30, 2020 We, International Certification Corp., would like to declare that the tested sample has been evaluated and in compliance with the requirement of the above standards. The test results contained in this report refer exclusively to the product. It may be duplicated completely for legal use with the approval of the applicant. It shall not be reproduced except in full without the written approval of our laboratory. Reviewed by: Approved by: Along Chen / Assistant Manager Gary Chang / Manager Report No.: FR090103AN Page : 2 of 127 Report Version: Rev. 01 Table of Contents 1 GENERAL DESCRIPTION .................................................................................................................... 5 1.1 Information.............................................................................................................................................. 5 1.2 Local Support Equipment List ................................................................................................................ 8 1.3 Test Setup Chart .................................................................................................................................... 8 1.4 The Equipment List .............................................................................................................................. 10 1.5 Test Standards ..................................................................................................................................... 11 1.6 Reference Guidance ............................................................................................................................ 11 1.7 Deviation from Test Standard and Measurement Procedure ............................................................... 11 1.8 Measurement Uncertainty .................................................................................................................... 11 2 TEST CONFIGURATION ..................................................................................................................... 12 2.1 Testing Facility ..................................................................................................................................... 12 2.2 The Worst Test Modes and Channel Details ....................................................................................... 13 3 TRANSMITTER TEST RESULTS ....................................................................................................... 14 3.1 Conducted Emissions ........................................................................................................................... 14 3.2 Emission Bandwidth ............................................................................................................................. 19 3.3 RF Output Power .................................................................................................................................. 28 3.4 Peak Power Spectral Density ............................................................................................................... 31 3.5 Transmitter Radiated and Band Edge Emissions ................................................................................ 41 3.6 Frequency Stability ............................................................................................................................. 124 4 TEST LABORATORY INFORMATION ............................................................................................. 127 Report No.: FR090103AN Page : 3 of 127 Report Version: Rev. 01 Release Record Report No. Version Description Issued Date FR090103AN Rev. 01 Initial issue Oct. 20, 2020 Report No.: FR090103AN Page : 4 of 127 Report Version: Rev. 01 Summary of Test Results FCC Rules Test Items Measured Result 15.207 Conducted Emissions [dBuV]: 0.168MHz 45.40 (Margin -9.68dB) - AV Pass 15.407(b) 15.209 Radiated Emissions [dBuV/m at 3m]: 5150.00MHz 53.00 (Margin -1.00dB) - AV Pass 15.407(a) Emission Bandwidth Meet the requirement of limit Pass 15.407(e) 6dB bandwidth Meet the requirement of limit Pass 15.407(a) RF Output Power Max Power [dBm]: 5150-5250MHz: 18.79 5725-5850MHz: 18.39 Pass 15.407(a) Peak Power Spectral Density Meet the requirement of limit Pass 15.407(g) Frequency Stability Meet the requirement of limit Pass 15.203 Antenna Requirement Meet the requirement of limit Pass Declaration of Conformity: The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. Comments and Explanations: The declared of product specification for EUT presented in the report are provided by the manufacturer, and the manufacturer takes all the responsibilities for the accuracy of product specification. Report No.: FR090103AN Page : 5 of 127 Report Version: Rev. 01 1 General Description 1.1 Information 1.1.1 Specification of the Equipment under Test (EUT) RF General Information Frequency Range (MHz) IEEE Std. 802.11 Ch. Freq. (MHz) Channel Number Transmit Chains (N TX ) Data Rate / MCS 5150-5250 5725-5850 a 5180-5240 5745-5825 36-48 [4] 149-165 [5] 1 6-54 Mbps 5150-5250 5725-5850 n (HT20) 5180-5240 5745-5825 36-48 [4] 149-165 [5] 1 MCS 0-7 5150-5250 5725-5850 n (HT40) 5190-5230 5755-5795 38-46 [2] 151-159 [2] 1 MCS 0-7 5150-5250 5725-5850 ac (VHT20) 5180-5240 5745-5825 36-48 [4] 149-165 [5] 1 MCS 0-9 5150-5250 5725-5850 ac (VHT40) 5190-5230 5755-5795 38-46 [2] 151-159 [2] 1 MCS 0-9 5150-5250 5725-5850 ac (VHT80) 5210 5775 42 [1] 155 [1] 1 MCS 0-9 Note 1: RF output power specifies that Maximum Conducted Output Power. Note 2: 802.11a/n/…

Text truncated - open the document above for the full version.

Report No.: FR090103 Page: : 1 of 13 Report Version: Rev. 01 Photographs of the Test Configuration Array antenna (WIF2.4G / 5G / BLE / LoRa) Conducted Emission Test Report No.: FR090103 Page: : 2 of 13 Report Version: Rev. 01 Array antenna (WIF2.4G / 5G / BLE / LoRa & LTE) Radiated Emission Below 1GHz Test Report No.: FR090103 Page: : 3 of 13 Report Version: Rev. 01 Radiated Emission Below 1GHz Test Report No.: FR090103 Page: : 4 of 13 Report Version: Rev. 01 Radiated Emission Above 1GHz Test Report No.: FR090103 Page: : 5 of 13 Report Version: Rev. 01 Radiated Emission Above 1GHz Test Report No.: FR090103 Page: : 6 of 13 Report Version: Rev. 01 Individual antenna (WIF2.4G / 5G / BLE / LoRa & LTE) Radiated Emission Below 1GHz Test Report No.: FR090103 Page: : 7 of 13 Report Version: Rev. 01 Radiated Emission Below 1GHz Test Report No.: FR090103 Page: : 8 of 13 Report Version: Rev. 01 Radiated Emission Above 1GHz Test Report No.: FR090103 Page: : 9 of 13 Report Version: Rev. 01 Radiated Emission Above 1GHz Test Report No.: FR090103 Page: : 10 of 13 Report Version: Rev. 01 Directional antenna (LTE) Radiated Emission Below 1GHz Test Report No.: FR090103 Page: : 11 of 13 Report Version: Rev. 01 Radiated Emission Below 1GHz Test Report No.: FR090103 Page: : 12 of 13 Report Version: Rev. 01 Radiated Emission Above 1GHz Test Report No.: FR090103 Page: : 13 of 13 Report Version: Rev. 01 Radiated Emission Above 1GHz Test