2AIT9-PG-M06Wi-Fi Smart Caller

La sonnerie par défaut d'usine est « Ding Dong » ou « Sonnette d'alarme ». Pour définir une sonnerie différente pour l'accessoire,suivez les étapes ci-dessous: (1) Modification via l’application (recommandé) Sur la page d’accueil du carillon, accédez successivement à : Accessoires → Carillon → Sonnerie de l’appareil. Choisissez la sonnerie souhaitée et enregistrez le paramètre. La modification est terminée. (2) Modification locale sur le carillon ① Appuyez deux fois de suite sur la touche SET. La LED verte clignote pour indiquer le mode de jumelage. ② Utilisez les touches Précédent / Suivant pour sélectionner votre sonnerie (32 sonneries disponibles). ③ Activez l’accessoire pour envoyer le signal de jumelage. La lecture de la sonnerie confirme la validation. ④ Appuyez brièvement sur la touche SET pour quitter rapidement le mode de jumelage. Deutsch Français Italiano Español 01 Außenansicht 01 Schéma d'apparence 01 Schema dell’aspetto 01 Diagrama de apariencia 01 Appearance Diagram 06 Installation 05 Changing the Ringtone English Detaillierte Anleitung Manuel détaillé Manuale dettagliato Manual detallado 04 Funktionsprüfung (1) Stromtest: Verbinden Sie den Rufempfänger mit einer Stromquelle. Der normale Betrieb wird bestätigt, wenn die Statusanzeigelampe blinkt und es klingelt. (2) Anrufprüfung: Aktivieren Sie ein Zubehör. Wenn der Rufempfänger blinkt und klingelt, und Ihr Handy gleichzeitig eine Push-Nachricht von der App erhält, dann funktioniert die Anruffunktion normal. 04 Test de fonctionnement (1) Test d'alimentation: Connectez l'appelleur à une source d'alimentation. Le fonctionnement normal est confirmé lorsque la lampe d'indication d'état clignote et qu'il sonne. (2) Test d'appel: Activez un accessoire. Si l'appelleur clignote et sonne, et que votre téléphone reçoit simultanément une notification push de l'app, alors la fonction d'appel fonctionne normalement. 04 Test delle funzioni (1) Test di alimentazione: Collega il chiamante a una fonte di alimentazione. Il funzionamento normale è confermato quando la luce indicatore di stato lampeggia e suona. (2) Test di chiamata: Attiva un accessorio. Se il chiamante lampeggia e suona, e il tuo telefono riceve simultaneamente una notifica push dall'App, allora la funzione di chiamata funziona normalmente. 04 Prueba de Funciones (1) Prueba de alimentación: Conecte el llamador a una fuente de alimentación. El funcionamiento normal se confirma cuando la luz indicadora de estado parpadea y suena. (2) Prueba de llamada: Active un accesorio. Si el llamador parpadea y suena, y su teléfono recibe simultáneamente una notificación push de la App, entonces la función de llamada funciona normalmente. 05 Klingelton ändern Die werkseitig eingestellte Klingelton ist „Ding Dong“ oder „Alarmton“. Um einen anderen Klingelton für das Zubehör einzustellen, befolgen Sie die unten stehenden Schritte: (1) Änderung per APP (empfohlen) Gehen Sie auf die Startseite der Klingel und tippen Sie nacheinander auf: Zubehör → Klingel → Gerätek- lingelton. Wählen Sie den gewünschten Ton aus und tippen Sie anschließend auf Speichern. Die Einstellung ist damit abgeschlossen. (2) Lokale Änderung direkt an der Klingel ① Drücken Sie die SET-Taste zweimal hintereinander. Die grüne LED blinkt – der Kopplungsmodus ist aktiviert. 05 Modification de la sonnerie 05 Cambio suoneria La suoneria predefinita di fabbrica è « Ding Dong » o « Tono di allarme ». Per impostare una suoneria diversa per l'accessorio, segui i passaggi seguenti : (1) Modifica tramite APP (consigliato) Nella pagina principale del campanello, selezionare in sequenza: Accessori → Campanello → Suoneria dispositivo. Scegliere la suoneria preferita e salvare le impostazioni. La modifica è completata. (2) Modifica locale sul campanello ① Premere due volte consecutive il tasto SET. Il LED verde lampeggia e segnala l’attivazione della modalità di accoppiamento. ② Selezionare la suoneria con i tasti Precedente / Successivo (32 opzioni disponibili). ③ Attivare l’accessorio per inviare il segnale di accoppiamento. La riproduzione della suoneria conferma l’esito positivo. ④ Premere brevemente il tasto SET per uscire rapidamente dalla modalità. 05 Cambio de tono de llamada El tono de llamada predeterminado de fábrica es « Ding Dong » o « Tono de alarma ». Para configurar un tono de llamada diferente para el accesorio, siga los pasos a continuación : (1) Cambio mediante APP (recomendado) En la página principal del timbre, acceda en orden a: Accesorios → Timbre → Tono del dispositivo. Seleccione el tono deseado y guarde los ajustes. El cambio finaliza automáticamente. (2) Cambio local en el timbre ① Presione dos veces seguidas el botón SET. El LED verde parpadea para indicar el modo de emparejamiento. ② Elija el tono con los botones Anterior / Siguiente (32 tonos disponibles). ③ Active el accesorio para emitir la señal de emparejamiento. Si el timbre reproduce el tono seleccionado, el ajuste es correcto. ④ Pulse brevemente el botón SET para salir del modo de emparejamiento. Tension de fonctionnement: DC 5V Courant en veille: ≤ 60mA Courant d'alarme: < 100mA Wi-Fi: IEEE 802.11 b/g/n 2.4G Fréquence sans fil: 433.92MHz (FSK) Portée sans fil: > 100m (espace ouvert) Température de fonctionnement: -10°C ~ +55°C Humidité de fonctionnement: ≤ 95%RH (non condensant) 07 Technische Daten Betriebsspannung: DC 5V Standby-Strom: ≤ 60mA Alarmstrom: < 100mA Wi-Fi: IEEE 802.11 b/g/n 2.4G Drahtlose Frequenz: 433.92MHz (FSK) Drahtlose Reichweite: > 100m (offener Raum) Betriebstemperatur: -10°C ~ +55°C Betriebsfeuchtigkeit: ≤ 95%RH (nicht kondensierend) 07 Caractéristiques techniques 07 Specifiche tecniche Tensione di funzionamento: DC 5V Corrente in standby: ≤ 60mA Corrente di allarme: < 100mA Wi-Fi: IEEE 802.11 b/g/n 2.4G Frequenza wireless: 433.92MHz (FSK) Raggio wireless: > 100m (spazio aperto) Temperatura di funzionamento: -10°C ~ +55°C Umidità di funzionamento: ≤ 95%RH (non condensante) 07 Especificaciones técnicas Voltaje de funcionamiento:…

Text truncated - open the document above for the full version.

Rev1/26/2023 PGSTCO.,LTD FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:July1,2026 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing FCCID:2AIT9-PG-M06 [PGSTCO.,LTD]certifiesthattheequipmentforwhichauthorizationissoughtisnot“covered” equipmentprohibitedfromreceivinganequipmentauthorizationpursuanttosection2.903oftheFCC rules. [PGSTCO.,LTD]certifiesthattheequipmentforwhichauthorizationissoughtdoesnotinclude cybersecurityoranti-virussoftwareproducedorprovidedbyKasperskyLab,Inc.oranyofitssuccessors andassignees,includingequipmentwithintegratedKasperskyLab,Inc.(oranyofitssuccessorsand assignees)cybersecurityoranti-virussoftwarepursuanttoDA-24-886andKDB986446D01Covered EquipmentGuidancesectionB(2a). Deviceisinherentlycompliantbasedonhardwarelimitationsorsoftwarecontrols. or ASoftwareBillofMaterials(SBOM)isprovidedtotheTCBforreview,and Theend-userorthirdpartiescannotinstalladditionalsoftwareonthisdevice. Sincerely, ContactName:DuZhixian Rev1/26/2023 PGSTCO.,LTD FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:July1,2026 Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing FCCID:2AIT9-PG-M06 [PGSTCO.,LTD]certifiesthat,asofthedateofthefilingoftheapplication,theapplicantisnotidentified ontheCoveredList(asaspecificallynamedentityoranyofitssubsidiariesoraffiliates)asanentity producing“covered”equipment. Sincerely, ContactName:DuZhixian

PGSTCO.,LTD Address：1stFloor,9thBlock,HuafuIndustrialPark,LangkouCommunity,Dalang,Longhua District,ShenzhenCity FRN:0025677766 Date:2026-06-28 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Ref:AttestationStatementsPart2.911(d)(7)Filing SUBJECT:FCCApplicationforFCCID:2AIT9-PG-M06 (“PGSTCO.,LTD”)certifiesthat,asofthedateofthefilingoftheapplication,( PlethyInc )is ourdesignatedU.S.agentforserviceofprocessforthe abovereferencedFCCID.(“PGSTCO.,LTD”)acceptstomaintainanagentfornoless thanoneyearafterthegranteehasterminatedallmarketingandimportationorthe conclusionofanyCommission-relatedproceedinginvolvingtheequipment. ( PlethyInc )accepts,asofthedateofthefilingoftheapplication,theobligationofthe designatedU.S.agentforserviceofprocessfortheabovereferencedFCCID. DesignatedU.S.AgentInformation: Name:PlethyInc FRN:0035219609 Address:2362QumeDr,Suite#DSanJose,CA95131UnitedStates ContactPerson:RajaSundaram/CEO Tel.:(408)607-7646 Email:[email protected] Sincerely, PGSTCo.,LTDPlethyInc Name:DuZhixianName:RajaSundaram Title:ManagerTitle:CEO Date:2026-06-28 Date:2026-06-30

PGSTCO.,LTD OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:July1,2026 Subject;RequestforConfidentiality FCCID:2AIT9-PG-M06 ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthese documentsmightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantage inthemarket. SchematicDiagram BlockDiagram OperationalDescription Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:DuZhixian Title:Manager

EffectiveDate:April2,2020QSF7.6.4-8–AgentAuthorizationLetterTemplatePage1of1 RevisionDate:Revision:0 PGSTCo.,LTD Date:Date:July1,2026 ProductModelNumber:PG-M06 FCCID:2AIT9-PG-M06 Towhomitmayconcern, Re:ProductCertificationRepresentativeAuthorizationLetter WeauthorizeQAILaboratoriesLtd.3980NorthFraserWay,BurnabyB.C.CanadaV5J5K5to actonourbehalfonallmattersconcerningtheabovenamedequipment. Thisshallincludethefollowing: Testing Approvalapplicationsandprocedures WedeclarethatQAILaboratoriesLtd.isallowedtoforwardallinformationrelatedtothe approvalprojecttotheappliedcertificationbodyandtothenotificationentitiesandtodiscuss anyissuesconcerningtheapprovalapplication.AnyandallactscarriedoutbyQAILaboratories Ltd.onourbehalfshallhavethesameeffectasactsofourown. By: ContactListedonFCCWesbite Title:Manager Email:[email protected] Telephone:0775-33252178 Onbehalfof:PGSTCo.,LTD

ShenzhenQCTestingLaboratoryCo.,Ltd. Page 1 of 5 Address:Eastof1/F.,BuildingE,XinghongSciencePark,No.111,ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'anDistrict,Shenzhen,Guangdong,China Tel:0755-23008269Fax:0755-23726780http://www.qctest.com.cn ProductName: Wi-FiSmartCaller TestModelNo.: PG-M06 EUTConstructionalDetails ShenzhenQCTestingLaboratoryCo.,Ltd. Page 2 of 5 Address:Eastof1/F.,BuildingE,XinghongSciencePark,No.111,ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'anDistrict,Shenzhen,Guangdong,China Tel:0755-23008269Fax:0755-23726780http://www.qctest.com.cn ShenzhenQCTestingLaboratoryCo.,Ltd. Page 3 of 5 Address:Eastof1/F.,BuildingE,XinghongSciencePark,No.111,ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'anDistrict,Shenzhen,Guangdong,China Tel:0755-23008269Fax:0755-23726780http://www.qctest.com.cn ShenzhenQCTestingLaboratoryCo.,Ltd. Page 4 of 5 Address:Eastof1/F.,BuildingE,XinghongSciencePark,No.111,ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'anDistrict,Shenzhen,Guangdong,China Tel:0755-23008269Fax:0755-23726780http://www.qctest.com.cn ShenzhenQCTestingLaboratoryCo.,Ltd. Page 5 of 5 Address:Eastof1/F.,BuildingE,XinghongSciencePark,No.111,ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'anDistrict,Shenzhen,Guangdong,China Tel:0755-23008269Fax:0755-23726780http://www.qctest.com.cn ------End------

FCCID:2AIT9-PG-M06 Length:400mm Width:360mm

ShenzhenQCTestingLaboratoryCo.,Ltd. Page 1 of 5 Address:Eastof1/F.,BuildingE,XinghongSciencePark,No.111,ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'anDistrict,Shenzhen,Guangdong,China Tel:0755-23008269Fax:0755-23726780http://www.qctest.com.cn ProductName: Wi-FiSmartCaller TestModelNo.: PG-M06 EUTConstructionalDetails： ShenzhenQCTestingLaboratoryCo.,Ltd. Page 2 of 5 Address:Eastof1/F.,BuildingE,XinghongSciencePark,No.111,ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'anDistrict,Shenzhen,Guangdong,China Tel:0755-23008269Fax:0755-23726780http://www.qctest.com.cn ShenzhenQCTestingLaboratoryCo.,Ltd. Page 3 of 5 Address:Eastof1/F.,BuildingE,XinghongSciencePark,No.111,ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'anDistrict,Shenzhen,Guangdong,China Tel:0755-23008269Fax:0755-23726780http://www.qctest.com.cn 433RX Antenna ShenzhenQCTestingLaboratoryCo.,Ltd. Page 4 of 5 Address:Eastof1/F.,BuildingE,XinghongSciencePark,No.111,ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'anDistrict,Shenzhen,Guangdong,China Tel:0755-23008269Fax:0755-23726780http://www.qctest.com.cn 2.4GWIFI Antenna ShenzhenQCTestingLaboratoryCo.,Ltd. Page 5 of 5 Address:Eastof1/F.,BuildingE,XinghongSciencePark,No.111,ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'anDistrict,Shenzhen,Guangdong,China Tel:0755-23008269Fax:0755-23726780http://www.qctest.com.cn ------End------

ShenzhenQCTestingLaboratoryCo.,Ltd. Page1of2 Address:Eastof1/F.,BuildingE,XinghongSciencePark,No.111,ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'anDistrict,Shenzhen,Guangdong,China Tel:0755-23008269Fax:0755-23726780http://www.qctest.com.cn FCCID:2AIT9-PG-M06 RFExposureEvaluation FCCKDBpublication447498D01GeneralRFExposureGuidancev06:MobileandPortableDevicesRF ExposureProceduresandEquipmentAuthorizationPolicies. Limits Thecriterialistedinthefollowingtableshallbeusedtoevaluatetheenvironmentimpactofhumanexposure toradiofrequency(RF)radiationasspecifiedin1.1307(b) LimitsforMaximumPermissibleExposure(MPE) Frequencyrange (MHz) Electricfield strength (V/m) Magneticfieldstrength (A/m) Powerdensity (mW/cm 2 ) Averagingtime (minutes) (A)LimitsforOccupational/ControlledExposures 0.3–3.06141.63*(100)6 3.0–301842/f4.89/f*(900/f 2 )6 30–30061.40.1631.06 300–1500f/3006 1500–100,00056 (B)LimitsforGeneralPopulation/UncontrolledExposure 0.3–1.346141.63*(100)30 1.34–30824/f2.19/f*(180/f 2 )30 30–30027.50.0730.230 300–1500f/150030 1500–100,0001.030 f=frequencyinMHz Friistransmissionformula:Pd=(Pout*G)/(4*pi*r 2 ) Where Pd=powerdensityinmW/cm 2 ,Pout=outputpowertoantennainmW; G=gainofantennainlinearscale,Pi=3.1416; R=distancebetweenobservationpointandcenteroftheradiatorincm PdidthelimitofMPE,1mW/cm 2 .Ifweknowthemaximumgainoftheantennaandthetotalpowerinputto theantenna,throughthecalculation,wewillknowthedistancerwheretheMPElimitisreached. TestProcedure SoftwareprovidedbyclientenabledtheEUTtotransmitandreceivedataatlowest,andhighestchannel individually. ShenzhenQCTestingLaboratoryCo.,Ltd. Page2of2 Address:Eastof1/F.,BuildingE,XinghongSciencePark,No.111,ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'anDistrict,Shenzhen,Guangdong,China Tel:0755-23008269Fax:0755-23726780http://www.qctest.com.cn TestResultofRFExposureEvaluation For2.4GWIFI AntennaGain:.1.11dBi Test Mode Minimum Separation Distance (cm) Output Power (dBm) Target power (dBm) Target power (mW) Antenna Gain (Numeric) Power Density Limit (mW/cm 2 ) Power Density At20cm (mW/cm 2 ) Test Results 802.11b20.0014.0114±131.6231.2910.00812Pass 802.11g 20.0013.89 13±1 25.1191.2910.00645 Pass 802.11 n(HT20) 20.0013.7613±125.1191.2910.00645Pass 802.11 n(HT40) 20.0012.4312±119.9531.2910.00512Pass Conclusion: ThemeasurementresultscomplywiththeFCCLimitper47CFR2.1091fortheuncontrolledRF Exposure.

AntennaSpecification Manufacture：TUYA ProductName：T1-U-HLAntenna AntennaType：PCB TestDate：2019.06.29 Testedby：LongWang Approvedby：Licco Content 1.GeneralDescription .................................................................................... 1 2.TestConfigurations ...................................................................................... 2 2.1TestEnvironment ............................................................................... 2 2.2TestEquipment .................................................................................. 2 2.3TestPrinciple ...................................................................................... 2 3.TestResults ................................................................................................. 3 3.1GainandEfficiency ............................................................................ 3 3.2RadiationPattern ............................................................................... 4 4.AntennaDimensions ................................................................................... 6 5.EUTPhoto ................................................................................................... 6 6.TestSetupPhoto ......................................................................................... 7 1 1.GeneralDescription ManufacturerHangzhouTuyaInformationTechnologyCo.,Ltd Address Room701,Building3,MoreCenter,No.87GuDunRoad, Hangzhou,Zhejiang,China TestLocation Room106,Building3,LetongSciencePark,No.500, QiuyiRoad,BinjiangDistrict,Hangzhou ProductNameT1-U-HLAntenna Productmodel T1-U-HL AntennaType PCBAntenna TestItems Gain;Efficiency;RadiationPattern TestFrequency 2400-2500MHz TestStandard ANSI/IEEEStd149-1979 2 2.TestConfigurations 2.1TestEnvironment Temperature(°C) 24 Humidity(%RH) 59 AtmosphericPressure(kPa) 100.5 2.2TestEquipment TestSystemTEM24Multi-probeMicrowaveChamber TestInstrumentAgilentE5071B 2.3TestPrinciple 3 3.TestResults 3.1GainandEfficiency Frequency(MHz)PeakGain(dBi)Efficiency(%) 2400 0.8249.43 2410 0.7849.43 2420 0.7848.42 2430 0.6748.19 2440 0.9149.32 2450 1.1152.00 2460 0.9949.55 2470 0.6645.19 2480 0.2041.11 2490 0.2038.99 2500 0.4940.83 4 3.2RadiationPattern Phi02D Phi902D 5 Theta902D 2480MHz3D 6 4.AntennaDimensions 7 5.TestSetupPhoto

Shenzhen QC Testing Laboratory Co., Ltd. Report No.: QCT26FR-0108E-01 Page 1 of 73 Address: East of 1/F., Building E, Xinghong Science Park, No.111, Shuiku Road, Fenghuanggang, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Tel: 0755-23008269 Fax: 0755-23726780 http://www.qctest.com.cn FCC PART 15.247 TEST REPORT On Behalf of PGST CO., LTD 1st Floor, 9th Block, Huafu Industrial Park, Langkou Community, Dalang,Longhua District, Shenzhen City FCC ID: 2AIT9-PG-M06 Model: PG-M06 July 04, 2026 T hi s Repor t Concer ns: Or iginal Report Equi pm ent T ype: Wi-Fi Smart Caller Test Engineer: Fan Yang Report Number: QCT26FR-0108E-01 Test Date: May 25 2026~June 23, 2026 Test Result: Pass Reviewed By: Vincent Yang Approved By: Kendy Wang Prepared By: Shenzhen QC Testing Laboratory Co., Ltd. East of 1/F., Building E, Xinghong Science Park, No.111, Shuiku Road, Fenghuanggang, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Tel: 0755-23008269 Fax: 0755-23726780 Shenzhen QC Testing Laboratory Co., Ltd. Report No.: QCT26FR-0108E-01 Page 2 of 73 Address: East of 1/F., Building E, Xinghong Science Park, No.111, Shuiku Road, Fenghuanggang, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Tel: 0755-23008269 Fax: 0755-23726780 http://www.qctest.com.cn Table of Contents 1. GENERAL INFORMATION ............................................................................................ 5 1.1 Product Description for Equipment under Test (EUT) ............................................................. 5 1.2 System Test Configuration ...................................................................................................... 6 1.3 Test Facility ............................................................................................................................. 7 1.4 Measurement Uncertainty ....................................................................................................... 7 2. SUMMARY OF TEST RESULTS ................................................................................... 8 3. LIST OF TEST AND MEASUREMENT INSTRUMENTS ............................................... 9 3.1 Conducted Emission Test ....................................................................................................... 9 3.2 Radiated Emission Test .......................................................................................................... 9 3.3 RF Conducted test ................................................................................................................ 10 4. ANTENNA REQUIREMENT ......................................................................................... 11 5. CONDUCTED EMISSIONS .......................................................................................... 12 5.1 Applicable Standard .............................................................................................................. 12 5.2 Limit ....................................................................................................................................... 12 5.3 Test setup .............................................................................................................................. 12 5.4 EMI Test Receiver Setup....................................................................................................... 12 5.5 Test procedure ...................................................................................................................... 12 5.6 Test Data ............................................................................................................................... 12 6. CONDUCTED PEAK OUTPUT POWER ...................................................................... 15 6.1 Applicable Standard .............................................................................................................. 15 6.2 Limit ....................................................................................................................................... 15 6.3 Test setup .............................................................................................................................. 15 6.4 Test Procedure ...................................................................................................................... 15 6.5 Test Data ............................................................................................................................... 16 7. CHANNEL BANDWIDTH & 99% OCCUPIED BANDWIDTH ...................................... 18 7.1 Applicable Standard .............................................................................................................. 18 7.2 Limit ....................................................................................................................................... 18 7.3 Test setup .............................................................................................................................. 18 7.4 Test Procedure ...................................................................................................................... 18 7.5 Test Data ............................................................................................................................... 18 8. POWER SPECTRAL DENSITY ................................................................................... 32 8.1 Applicable Standard .............................................................................................................. 32 8.2 Limit ....................................................................................................................................... 32 8.3 Test setup .............................................................................................................................. 32 8.4 Test Procedure ...................................................................................................................... 32 8.5 Test Data ...............…

Text truncated - open the document above for the full version.

ShenzhenQCTestingLaboratoryCo.,Ltd. Page 1 of 2 Address:Eastof1/F.,BuildingE,XinghongSciencePark,No.111,ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'anDistrict,Shenzhen,Guangdong,China Tel:0755-23008269Fax:0755-23726780http://www.qctest.com.cn ProductName: Wi-FiSmartCaller TestModelNo.: PG-M06 PhotographofTestSetup ConductedEmissions RadiatedEmissions(30MHz-1GHz) ShenzhenQCTestingLaboratoryCo.,Ltd. Page 2 of 2 Address:Eastof1/F.,BuildingE,XinghongSciencePark,No.111,ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'anDistrict,Shenzhen,Guangdong,China Tel:0755-23008269Fax:0755-23726780http://www.qctest.com.cn RadiatedEmissions(Above1GHz)