2AIT9-PG-S12Wireless Interlinked Smoke Alarm

(1) Self-check Test: Press the [TEST/ ] button on any alarm or the remote control. All interconnected alarms will trigger audible and visual alarms in sequence, indicating normal functionality. (2)Smoke Alarm Test: Bring test smoke close to any alarm. All interconnected devices will trigger audible and visual alarms in sequence, indicating normal functionality. (3)High-Temperature Test: Place any alarm in an environment exceeding 57°C. Once it triggers, all interconnected devices will activate audible and visual alerts sequentially, confirming normal operation. Tension de fonctionnement: DC 3V (Batterie lithium CR123A remplaçable) Courant en veille: < 35μA Courant d’alarme: < 100mA Alarme de température: >57°C Durée de vie de la batterie: 3 ans Niveau sonore d’alarme: >85dB Fréquence sans fil: 433,92 MHz Distance de transmission: ≥200 m (en zone ouverte) Nombre maximum de dispositifs interconnectés:200 unités Mode d’installation: Montage au plafond Température de fonctionnement: –10°C ~ 55°C Humidité de fonctionnement: ≤95%RH Normes européennes: EN 14604:2005 Normes américaines: UL 217 (Conformément aux spécifications, voir l'étiquette arrière.) Betriebsspannung: DC 3V (Austauschbare CR123A Lithiumbatterie) Standby-Strom: < 35μA Alarmstrom: < 100mA Temperaturalarm: >57°C Batterielebensdauer: 3 Jahre Alarmschallempfindlichkeit: >85dB Funkfrequenz: 433,92 MHz Übertragungsdistanz: ≥200 m (Freifeld) Max. Anzahl vernetzter Geräte: 200 Stück Installationsart: Deckenmontage Betriebstemperatur: –10°C ~ 55°C Betriebsfeuchtigkeit: ≤95%RH Europäische Normen: EN 14604:2005 US-Normen: UL 217 (Gemäß Versandangaben, siehe Rücketikett.) Deutsch Français Italiano Español Kurzanleitung für den drahtlosen vernetzten Rauchmelder 01 Außenansicht 05 Technische Spezifikationen Guide de démarrage rapide de l’alarme de fumée sans fil interconnectée 01 Schéma d'apparence 05 Spécifications techniques Guida rapida all’allarme antincendio wireless interconnesso 01 Schema dell’aspetto Guía de inicio rápido del detector de humo inalámbrico interconectado 01 Diagrama de apariencia Tensión de funcionamiento: DC 3V (Batería de litio CR123A reemplazable) Corriente en reposo: < 35μA Corriente en alarma: < 100mA Alarma de temperatura: >57°C Duración de la batería: 3 años Nivel de sonido de alarma: >85dB Frecuencia inalámbrica: 433,92 MHz Distancia de transmisión: ≥200 m (en zona abierta) Número máximo de dispositivos interconectados:200 unidades Método de instalación: Montaje en techo Temperatura de funcionamiento: –10°C ~ 55°C Humedad de funcionamiento: ≤95%RH Normas UE: EN 14604:2005 Normas EE. UU.: UL 217 (Según especificaciones de envío, ver etiqueta trasera.) 05 Especificaciones técnicas Wireless Interconnected Smoke Alarm Quick Start Manual 01 Appearance Diagram 02 Factory Configuration and Installation Notes The alarms are pre-configured for interconnection and successfully paired with the included remote control. Before installation, test all wireless alarms to confirm the interconnection is functioning properly before putting them into service.To add more alarms to the existing network, please refer to the detailed user manual. 03 Test Functions 04 Installation 02 Werkseinstellungen und Installationshinweise Die Alarme sind vorinstalliert für die Vernetzung und werden mit der beigefügten Fernbedienung erfolgreich gepaart. Bevor Sie sie installieren, testen Sie alle drahtlosen Alarme, um sicherzustellen, dass die Vernetzung korrekt funktioniert, bevor Sie sie in Betrieb nehmen. Um weitere Alarme zu einem bestehenden Netzwerk hinzuzufügen, lesen Sie bitte das detaillierte Benutzerhandbuch. 03 Testfunktionen 04 Installation (1) Auto-test: Appuyez sur le bouton [TEST/ ] de n'importe quelle alarme ou de la télécommande. Toutes les alarmes interconnectées déclenchent des alarmes sonores et visuelles successivement. (2) Test d'alarme de fumée: Approchez de la fumée de test de n'importe quelle alarme. Tous les appareils interconnectés déclenchent des alarmes sonores et visuelles successivement. (3) Test de température élevée: Placez une alarme dans un environnement supérieur à 57°C. Une fois déclenchée, tous les appareils interconnectés activent des alertes sonores et visuelles successivement. (1) Selbsttest: Drücken Sie die [TEST/ ]-Taste an jedem Alarm oder der Fernbedienung. Alle vernetzten Alarme lösen nacheinander akustische und visuelle Alarme aus. (2) Rauchalarm-Test: Bringen Sie Testrauch in die Nähe eines beliebigen Alarms. Alle vernetzten Geräte lösen nacheinander akustische und visuelle Alarme aus. (3) Hochtemperatur-Test: Platzieren Sie einen Alarm in einer Umgebung über 57°C. Sobald er ausgelöst wird, aktivieren alle vernetzten Geräte nacheinander akustische und visuelle Warnungen. 02 Configuration usine et notes d’installation Les alarmes sont préconfigurées pour la connexion et appairées avec succès avec le télécommande fournie. Avant l'installation, testez tous les alarmes sans fil pour confirmer que la connexion fonctionne correctement avant de les mettre en service. Pour ajouter plus d'alarmes au réseau existant, veuillez consulter le manuel d'utilisation détaillé. 03 Tests de fonctionnement Marquer et percer les trous à l'aide du support, puis faire tourner l'alarme dans le sens des aiguilles d'une montre, dans la direction "OPEN→CLOSE", pour la fixer. Enfin, appuyer sur le bouton«TEST/ »pour confirmer le bon fonctionnement. 04 Installation (1) Autotest: Premere il pulsante [TEST/ ] su qualsiasi allarme o sul telecomando. Tutti gli allarmi interconnessi attivano in sequenza allarmi acustici e visivi. (2) Test allarme fumo: Avvicinare il fumo di prova a qualsiasi allarme. Tutti i dispositivi interconnessi attivano in sequenza allarmi acustici e visivi. (3) Test alta temperatura: Posizionare un allarme in un ambiente superiore a 57°C. Una volta attivato, tutti i dispositivi interconnessi attivano in sequenza avvisi acustici e visivi. 02 Configurazione di fabbrica e note di installazione Gli allarmi sono pr…

Text truncated - open the document above for the full version.

PGSTCO.,LTD Address：1stFloor,9thBlock,HuafuIndustrialPark,LangkouCommunity,Dalang,Longhua District,ShenzhenCity FRN:0025677766 Date:2026-06-28 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Ref:AttestationStatementsPart2.911(d)(7)Filing SUBJECT:FCCApplicationforFCCID:2AIT9-PG-S12 (“PGSTCO.,LTD”)certifiesthat,asofthedateofthefilingoftheapplication,( PlethyInc )is ourdesignatedU.S.agentforserviceofprocessforthe abovereferencedFCCID.(“PGSTCO.,LTD”)acceptstomaintainanagentfornoless thanoneyearafterthegranteehasterminatedallmarketingandimportationorthe conclusionofanyCommission-relatedproceedinginvolvingtheequipment. ( PlethyInc )accepts,asofthedateofthefilingoftheapplication,theobligationofthe designatedU.S.agentforserviceofprocessfortheabovereferencedFCCID. DesignatedU.S.AgentInformation: Name:PlethyInc FRN:0035219609 Address:2362QumeDr,Suite#DSanJose,CA95131UnitedStates ContactPerson:RajaSundaram/CEO Tel.:(408)607-7646 Email:[email protected] Sincerely, PGSTCo.,LTDPlethyInc Name:DuZhixianName:RajaSundaram Title:ManagerTitle:CEO Date:2026-06-28 Date:2026-06-30

Rev1/26/2023 PGSTCO.,LTD FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:June30,2026 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing FCCID:2AIT9-PG-S12 [PGSTCO.,LTD]certifiesthattheequipmentforwhichauthorizationissoughtisnot“covered” equipmentprohibitedfromreceivinganequipmentauthorizationpursuanttosection2.903oftheFCC rules. [PGSTCO.,LTD]certifiesthattheequipmentforwhichauthorizationissoughtdoesnotinclude cybersecurityoranti-virussoftwareproducedorprovidedbyKasperskyLab,Inc.oranyofitssuccessors andassignees,includingequipmentwithintegratedKasperskyLab,Inc.(oranyofitssuccessorsand assignees)cybersecurityoranti-virussoftwarepursuanttoDA-24-886andKDB986446D01Covered EquipmentGuidancesectionB(2a). Deviceisinherentlycompliantbasedonhardwarelimitationsorsoftwarecontrols. or ASoftwareBillofMaterials(SBOM)isprovidedtotheTCBforreview,and Theend-userorthirdpartiescannotinstalladditionalsoftwareonthisdevice. Sincerely, ContactName:DuZhixian Rev1/26/2023 PGSTCO.,LTD FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:June30,2026 Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing FCCID:2AIT9-PG-S12 [PGSTCO.,LTD]certifiesthat,asofthedateofthefilingoftheapplication,theapplicantisnotidentified ontheCoveredList(asaspecificallynamedentityoranyofitssubsidiariesoraffiliates)asanentity producing“covered”equipment. Sincerely, ContactName:DuZhixian

EffectiveDate:April2,2020QSF7.6.4-8–AgentAuthorizationLetterTemplatePage1of1 RevisionDate:Revision:0 PGSTCo.,LTD Date:Date:June30,2026 ProductModelNumber:PG-S12 FCCID:2AIT9-PG-S12 Towhomitmayconcern, Re:ProductCertificationRepresentativeAuthorizationLetter WeauthorizeQAILaboratoriesLtd.3980NorthFraserWay,BurnabyB.C.CanadaV5J5K5to actonourbehalfonallmattersconcerningtheabovenamedequipment. Thisshallincludethefollowing: Testing Approvalapplicationsandprocedures WedeclarethatQAILaboratoriesLtd.isallowedtoforwardallinformationrelatedtothe approvalprojecttotheappliedcertificationbodyandtothenotificationentitiesandtodiscuss anyissuesconcerningtheapprovalapplication.AnyandallactscarriedoutbyQAILaboratories Ltd.onourbehalfshallhavethesameeffectasactsofourown. By: ContactListedonFCCWesbite Title:Manager Email:[email protected] Telephone:0775-33252178 Onbehalfof:PGSTCo.,LTD

PGSTCO.,LTD OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:June30,2026 Subject;RequestforConfidentiality FCCID:2AIT9-PG-S12 ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthese documentsmightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantage inthemarket. SchematicDiagram BlockDiagram OperationalDescription Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:DuZhixian Title:Manager

PGSTCO.,LTD To:QAILABORATORIESLTD. DECLARATIONOFIDENTITY Herebywe: PGSTCO.,LTD (NameofManufacturer) BasicModelNumber:PG-S12 BasicBrandName:/ BasicProductName:WirelessInterlinkedSmokeAlarm BasicTestReportApplication Number:QCT26ER-0091-01 DeclaretheCircuit,PCBLayout;ElectricalPartsandOutlookofthefollowing product(s)areidenticaltothebasicmodel: □  New/☑AdditionalModelNumber(s):PG-S13,PG-S14,PG-S15, PG-S16 □New/□AdditionalBrandName(s): □New/□AdditionalProductName(s): Exceptthefollowing(s):PCBboard,structureandinternalofthese model(s)arethesame,Justdifferenceistheshellandmodel. Remarks: SignaturewithCompanyChop: PrintedName:DuZhixian DATE:2026.07.04

ShenzhenQCTestingLaboratoryCo.,Ltd. Page 1 of 5 Address:Eastof1/F.,BuildingE,XinghongSciencePark,No.111,ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'anDistrict,Shenzhen,Guangdong,China Tel:0755-23008269Fax:0755-23726780http://www.qctest.com.cn ProductName: WirelessInterlinkedSmokeAlarm TestModelNo.: PG-S12 EUTConstructionalDetails ShenzhenQCTestingLaboratoryCo.,Ltd. Page 2 of 5 Address:Eastof1/F.,BuildingE,XinghongSciencePark,No.111,ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'anDistrict,Shenzhen,Guangdong,China Tel:0755-23008269Fax:0755-23726780http://www.qctest.com.cn ShenzhenQCTestingLaboratoryCo.,Ltd. Page 3 of 5 Address:Eastof1/F.,BuildingE,XinghongSciencePark,No.111,ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'anDistrict,Shenzhen,Guangdong,China Tel:0755-23008269Fax:0755-23726780http://www.qctest.com.cn ShenzhenQCTestingLaboratoryCo.,Ltd. Page 4 of 5 Address:Eastof1/F.,BuildingE,XinghongSciencePark,No.111,ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'anDistrict,Shenzhen,Guangdong,China Tel:0755-23008269Fax:0755-23726780http://www.qctest.com.cn ShenzhenQCTestingLaboratoryCo.,Ltd. Page 5 of 5 Address:Eastof1/F.,BuildingE,XinghongSciencePark,No.111,ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'anDistrict,Shenzhen,Guangdong,China Tel:0755-23008269Fax:0755-23726780http://www.qctest.com.cn ------End------

FCCID:2AIT9-PG-S12 Length:500mm Width:300mm

ShenzhenQCTestingLaboratoryCo.,Ltd. Page 1 of 4 Address:Eastof1/F.,BuildingE,XinghongSciencePark,No.111,ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'anDistrict,Shenzhen,Guangdong,China Tel:0755-23008269Fax:0755-23726780http://www.qctest.com.cn ProductName: WirelessInterlinkedSmokeAlarm TestModelNo.: PG-S12 EUTConstructionalDetails： ShenzhenQCTestingLaboratoryCo.,Ltd. Page 2 of 4 Address:Eastof1/F.,BuildingE,XinghongSciencePark,No.111,ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'anDistrict,Shenzhen,Guangdong,China Tel:0755-23008269Fax:0755-23726780http://www.qctest.com.cn ShenzhenQCTestingLaboratoryCo.,Ltd. Page 3 of 4 Address:Eastof1/F.,BuildingE,XinghongSciencePark,No.111,ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'anDistrict,Shenzhen,Guangdong,China Tel:0755-23008269Fax:0755-23726780http://www.qctest.com.cn 433MRXAntenna 433MTXAntenna ShenzhenQCTestingLaboratoryCo.,Ltd. Page 4 of 4 Address:Eastof1/F.,BuildingE,XinghongSciencePark,No.111,ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'anDistrict,Shenzhen,Guangdong,China Tel:0755-23008269Fax:0755-23726780http://www.qctest.com.cn ------End------

ShenzhenQCTestingLaboratoryCo.,Ltd. Page1of1 Address:Eastof1/F.,BuildingE,XinghongSciencePark,No.111,ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'anDistrict,Shenzhen,Guangdong,China Tel:0755-23008269Fax:0755-23726780http://www.qctest.com.cn FCCID:2AIT9-PG-S12 RFExposureEvaluation AccordingtoKDB447498D04RFExposureProceduresandEquipmentAuthorizationPoliciesforMobileand PortableDevicespart2.1.2,asingleRFsourceisexemptRFdevice(fromtherequirementtoshowdata demonstratingcompliancetoRFexposurelimits,aspreviouslymentioned)iftheavailablemaximum time-averagedpowerisnomorethan1mW,regardlessofseparationdistanceT'hisexemptionappliestoall operatingconligurationsandexposureconditions,forthefrequencyrange100kHzto100GHz,regardlessof fixed,mobile,orportabledeviceexposureconditions.Thisisastandaloneexemption,anditcannotbe appliedinconjunctionwithanyothertestexemption. Theresultisroundedtoonedecimalplaceforcomparison Here. ThedevicehasbeenevaluatedtomeetgeneralRFexposurerequirement.Thedevicecanbeused inportableexposureconditionwithoutrestriction. TestResultofRFExposureEvaluation For433.92M Frequency(MHz) Power (dBuV/m) Power (dBm) Power (mW) Limmit (mW) 433.92M90.67-4.530.35241 Notes:90.67dBuV/m-95.2=-4.53dBm Conclusion: 0.3524mW<1mW,soaSARtestisnotrequired.

Shenzhen QC Testing Laboratory Co., Ltd. Report No.: QCT26ER-0091 -01 Page 1 of 22 Address: East of 1/F., Building E, Xinghong Science Park, No.111, Shuiku Road, Fenghuanggang, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Tel: 0755-23008269 Fax: 0755-23726780 www.qctest.com.cn FCC PART 15.231 TEST REPORT On Behalf of PGST CO., LTD 1st Floor, 9th Block, Huafu Industrial Park, Langkou Community, Dalang,Longhua District, Shenzhen City FCC ID: 2AIT9-PG-S12 Model: PG-S12, PG-S13, PG-S14, PG-S15, PG-S16 July 06, 2026 T hi s Repor t Concer ns: Or iginal Report Equi pm ent T ype: W ir eles s I nt er link ed Sm ok e Alar m Test Engineer: Fan Yang Report Number: QCT26ER-0091 -01 Test Date: May 20 2026~June 03, 2026 Test Result: Pass Reviewed By: Vincent Yang Approved By: Kendy Wang Prepared By: Shenzhen QC Testing Laboratory Co., Ltd. East of 1/F., Building E, Xinghong Science Park, No.111, Shuiku Road, Fenghuanggang, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Tel: 0755-23008269 Fax: 0755-23726780 Shenzhen QC Testing Laboratory Co., Ltd. Report No.: QCT26ER-0091 -01 Page 2 of 22 Address: East of 1/F., Building E, Xinghong Science Park, No.111, Shuiku Road, Fenghuanggang, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Tel: 0755-23008269 Fax: 0755-23726780 www.qctest.com.cn Table of Contents 1. GENERAL INFORMATION ............................................................................................ 4 1.1 Product Description for Equipment under Test (EUT) ......................................................... 4 1.2 System Test Configuration .................................................................................................. 4 1.3 Test Facility.......................................................................................................................... 5 1.4 Measurement Uncertainty .................................................................................................... 5 2. SUMMARY OF TEST RESULTS ................................................................................... 6 3. LIST OF TEST AND MEASUREMENT INSTRUMENTS ............................................... 7 3.1 Radiated Emission Test ....................................................................................................... 7 3.2 RF Conducted test ............................................................................................................... 7 4. ANTENNA REQUIREMENT ........................................................................................... 8 5. RADIATED EMISSION METHOD .................................................................................. 9 5.1 Applicable Standard............................................................................................................. 9 5.2 Limit ..................................................................................................................................... 9 5.3 Receiver setup ................................................................................................................... 10 5.4 Test setup .......................................................................................................................... 10 5.5 Test Procedure .................................................................................................................. 11 5.6 Test Data ........................................................................................................................... 11 6. 20DB OCCUPY BANDWIDTH ..................................................................................... 12 6.1 Applicable Standard........................................................................................................... 16 6.2 Limit ................................................................................................................................... 16 6.3 Test setup .......................................................................................................................... 16 6.4 Test Data ........................................................................................................................... 16 7. RELEASE TIME MEASUREMENT .............................................................................. 17 7.1 Applicable Standard........................................................................................................... 18 7.2 Limit ................................................................................................................................... 18 7.3 Test Procedure .................................................................................................................. 18 7.4 Test setup .......................................................................................................................... 18 7.5 Test Data ........................................................................................................................... 18 8. DUTY CYCLE ............................................................................................................... 20 8.1 Applicable Standard........................................................................................................... 20 8.2 Limit ................................................................................................................................... 20 8.3 Test setup .......................................................................................................................... 20 8.4 Test Procedure .................................................................................................................. 20 8.5 Test Data ........................................................................................................................... 20 Shenzhen QC Testing Laboratory Co., Ltd. Report No.: QCT26ER-0091 -01 Page 3 of 22 Address: East of 1/F., Building E, Xinghong Science Park, No.111, Shuiku Road, F…

Text truncated - open the document above for the full version.

SHENZHENDASHANCOMMUNICATIONCO.,LTD SampleConfirmationLetter Applicant PGSTCo.,Ltd ProjectName PG-13 PartName 433MTransmission antennaspring frequencyrange 433±5MHz PartNumberDS-T433E15-07-Aedition R:A Sampletype IssueDate 2024.05.09 Preparedby Reviewedby Approve Customer Approval purchasedinlargequantitieswitnessing:______________ □Limitededitionrecognition，limit＿＿＿，reason：_______ Address 1stFloor,9thBlock,HuafuIndustrialPark,Langkou Community,Dalang,Longhua District,ShenzhenCity Manufacturer ShenzhenQiliSpringElectronicsCo.,Ltd. Address 304,Building46,ZoneB,YuanshanIndustrialPark,Shangcun Community,GongmingSub-district,GuangmingDistrict, ShenzhenCity,GuangdongProvince,China number： DS-QR-EN-001 version：A0Shelflife：2yearseffectivedate：2023.05.09 1 □Fullyrecognized,canbe 2 SHENZHENDASHANCOMMUNICATIONCO.,LTD Content 1、Cover)..................................................................................1 2、Content.................................................................................2 3、ProductPicture......................................................................3 4、Specification........................................................................4 5、Electricitytestreport..........................................................4-5 3 SHENZHENDASHANCOMMUNICATIONCO.,LTD 3、Productdimensiondiagram SHENZHENDASHANCOMMUNICATIONCO.,LTD 4 4.Specification FrequencyRange(MHz) 433±5 Antennagain(dBi) 0 Efficiency（%） 25 VSWR ≤3.0Forreferenceonly InputImpedance(Ω) 50 OperationTemperature -40°C~65°C StorageTemperature -40°C~65°C 5、RadiationReport 5.1standingwave 5.2Efficiencychart ANT frequencypointefficiency gain 42325%-1.9 42725%-1.3 43128%-1.5 43528%-1.2 43928%0 44328%-1.0 SHENZHENDASHANCOMMUNICATIONCO.,LTD 5.3Directionaldiagram 6.TestSetupPhoto 5

ShenzhenQCTestingLaboratoryCo.,Ltd. Page 1 of 1 Address:Eastof1/F.,BuildingE,XinghongSciencePark,No.111,ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'anDistrict,Shenzhen,Guangdong,China Tel:0755-23008269Fax:0755-23726780http://www.qctest.com.cn ProductName: WirelessInterlinkedSmokeAlarm TestModelNo.: PG-S12 PhotographofTestSetup RadiatedEmissions(30MHz-1GHz) RadiatedEmissions(Above1GHz)