2AIT9-PG-W01Smart Gateway

Smart Gateway User Manual The smart gateway supports multi-protocol communication (WiFi + Bluetooth + Zigbee) and connects to cloud platforms and mobile devices via WiFi. Through its companion app, users can monitor and remotely control connected Zigbee/Bluetooth devices (Mesh & BLE), enabling device pairing/reset, third-party control integration, and sub-device group management. This smart gateway meets the application requirements of smart home automation and intelligent security systems. 1.Download the "Smart Life" APP Search for "Smart Life" in the app store or scan the QR code on the package to download and install the app. For first-time users, click "Register" to create an account.If you already have an account, click "Login". Read the user manual carefully before use Overview 1.Open the "Smart Life" APP. 2.Tap "+" → Select "Add Device" 3.Choose the discovered "Smart Gateway" 4.Enter your WiFi password → Tap "Next" 5.Tap Done. 6.After adding, you can start adding and managing your Zigbee devices. Add Device 1.Only support 2.4GHz,not 5GHz. 2.The distance between the device and the router should not be too far away, which will affect the WiFi signal. 3.Make sure the WiFi password is entered correctly. 4.lf the connection fails,try sharing the access point with another phone instead of the router's WiFi.This method can help us determine if the WiFi signal from the router is compatible with this product. 5.When the device is connected correctly, don't remove it; otherwise, it will be restored to factory settings and cannot be controlled directly. 6.lf you change the WiFi password, please reconnect. FAQ&Feedback Product Specifications Preparation Steps Status LED Network Pairing LED Reset Button Reset Button Power Socket 2025.12.6 英文说明书PG-W01网关 60*60mm 80g书写纸（正反印） 印刷尺寸：240*60mm，风琴折 Product nameSmart Gateway Adapter output5V 1A Worki ng temperature-10~55 Worki ng humidity10%~90% RH(no co ndensa tion) Wireless tech nology2.4G WiF i / ZigBee / B luetooth Dimensi ons62*62*13mm °C°C 2.Connect your phone to a 2.4GHz WiFi network. 3.Turn on the Bluetooth function on your phone. 4.Enable mobile data. Network Setup 1.Power on the gateway. 2.Press and hold the reset button for 5 seconds, then release it. 3.Ensure the blue LED is on and the red LED is flashing. § 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. *RF warning for Mobile device: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 加警告语

Rev1/26/2023 PGSTCO.,LTD FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:January7,2026 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing FCCID:2AIT9-PG-W01 [PGSTCO.,LTD]certifiesthattheequipmentforwhichauthorizationissoughtisnot“covered” equipmentprohibitedfromreceivinganequipmentauthorizationpursuanttosection2.903oftheFCC rules. [PGSTCO.,LTD]certifiesthattheequipmentforwhichauthorizationissoughtdoesnotinclude cybersecurityoranti-virussoftwareproducedorprovidedbyKasperskyLab,Inc.oranyofitssuccessors andassignees,includingequipmentwithintegratedKasperskyLab,Inc.(oranyofitssuccessorsand assignees)cybersecurityoranti-virussoftwarepursuanttoDA-24-886andKDB986446D01Covered EquipmentGuidancesectionB(2a). Deviceisinherentlycompliantbasedonhardwarelimitationsorsoftwarecontrols. or ASoftwareBillofMaterials(SBOM)isprovidedtotheTCBforreview,and Theend-userorthirdpartiescannotinstalladditionalsoftwareonthisdevice. Sincerely, ContactName:DuZhixian Rev1/26/2023 PGSTCO.,LTD FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:January7,2026 Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing FCCID:2AIT9-PG-W01 [PGSTCO.,LTD]certifiesthat,asofthedateofthefilingoftheapplication,theapplicantisnotidentified ontheCoveredList(asaspecificallynamedentityoranyofitssubsidiariesoraffiliates)asanentity producing“covered”equipment. Sincerely, ContactName:DuZhixian

PGSTCO.,LTD Address：1stFloor,9thBlock,HuafuIndustrialPark,LangkouCommunity,Dalang,Longhua District,ShenzhenCity FRN:0025677766 Date:2026-01-07 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Ref:AttestationStatementsPart2.911(d)(7)Filing SUBJECT:FCCApplicationforFCCID:2AIT9-PG-W01 (“PGSTCO.,LTD”)certifiesthat,asofthedateofthefilingoftheapplication,( PlethyInc )is ourdesignatedU.S.agentforserviceofprocessforthe abovereferencedFCCID.(“PGSTCO.,LTD”)acceptstomaintainanagentfornoless thanoneyearafterthegranteehasterminatedallmarketingandimportationorthe conclusionofanyCommission-relatedproceedinginvolvingtheequipment. (PlethyInc)accepts,asofthedateofthefilingoftheapplication,theobligationofthe designatedU.S.agentforserviceofprocessfortheabovereferencedFCCID. DesignatedU.S.AgentInformation: Name:PlethyInc FRN:0035219609 Address:2362QumeDr,Suite#DSanJose,CA95131UnitedStates ContactPerson:RajaSundaram/CEO Tel.:(408)607-7646 Email:[email protected] Sincerely, PGSTCo.,LTDPlethyInc Name:DuZhixianName:RajaSundaram Title:ManagerTitle:CEO Date:2026-01-07Date:2026-01-07

PGSTCO.,LTD OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:January7,2026 Subject;RequestforConfidentiality FCCID:2AIT9-PG-W01 ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthese documentsmightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantage inthemarket. SchematicDiagram BlockDiagram OperationalDescription Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:DuZhixian Title:Manager

EffectiveDate:April2,2020QSF7.6.4-8–AgentAuthorizationLetterTemplatePage1of1 RevisionDate:Revision:0 PGSTCo.,LTD Date:2026.01.05 ProductModelNumber:PG-W01 FCCID:2AIT9-PG-W01 Towhomitmayconcern, Re:ProductCertificationRepresentativeAuthorizationLetter WeauthorizeQAILaboratoriesLtd.3980NorthFraserWay,BurnabyB.C.CanadaV5J5K5to actonourbehalfonallmattersconcerningtheabovenamedequipment. Thisshallincludethefollowing: Testing Approvalapplicationsandprocedures WedeclarethatQAILaboratoriesLtd.isallowedtoforwardallinformationrelatedtothe approvalprojecttotheappliedcertificationbodyandtothenotificationentitiesandtodiscuss anyissuesconcerningtheapprovalapplication.AnyandallactscarriedoutbyQAILaboratories Ltd.onourbehalfshallhavethesameeffectasactsofourown. By: ContactListedonFCCWesbite Title:Manager Email:[email protected] Telephone:0775-33252178 Onbehalfof:PGSTCo.,LTD

AntennaSpecification Manufacture：TUYA Product Name：WBRG1Antenna Antenna Type：PCB Test Date：2019.05.20 Tested by：Long Wang Approved by：Licco Content 1.GeneralDescription.................................................................................1 2.TestConfigurations...................................................................................2 2.1TestEnvironment............................................................................2 2.2TestEquipment...............................................................................2 2.3TestPrinciple...................................................................................2 3.TestResults..............................................................................................3 3.1GainandEfficiency..........................................................................3 3.2RadiationPattern............................................................................4 4.AntennaDimensions................................................................................6 5.EUTPhoto................................................................................................6 6.TestSetupPhoto......................................................................................7 1 1.GeneralDescription ManufacturerHangzhouTuyaInformationTechnologyCo.,Ltd Address Room701,Building3,MoreCenter,No.87GuDunRoad, Hangzhou,Zhejiang,China TestLocation Room106,Building3,LetongSciencePark,No.500, QiuyiRoad,BinjiangDistrict,Hangzhou ProductNameWBRG1Antenna Productmodel WBRG1 AntennaType PCBAntenna TestItems Gain;Efficiency;RadiationPattern TestFrequency 2400-2500MHz TestStandard ANSI/IEEEStd149-1979 2 2.TestConfigurations 2.1TestEnvironment Temperature(°C)25 Humidity(%RH)60 AtmosphericPressure(kPa)100.5 2.2TestEquipment TestSystemTEM24Multi-probeMicrowaveChamber TestInstrumentAgilentE5071B 2.3TestPrinciple 3 3.TestResults 3.1GainandEfficiency Frequency(MHz)PeakGain(dBi)Efficiency(%) 2400 0.30 241 44.77 0 0.70 242 46.88 0 0.85 243 48.64 0 0.86 244 48.53 0 0.85 245 48.64 0 1.05 246 50.23 0 0.92 247 48.87 0 0.71 248 44.98 0 0.59 249 40.83 0 0.32 250 37.84 0 0.2537.33 4 3.2RadiationPattern Phi02D Phi902D 5 Theta902D 2480MHz3D 6 4.AntennaDimensions 5.EUT Photo 7 6.TestSetupPhoto

AntennaSpecification Manufacture：TUYA Product Name：ZS3L Antenna Antenna Type：PCB Test Date：2019.06.29 Tested by：Long Wang Approved by：Licco Content 1.GeneralDescription.................................................................................1 2.TestConfigurations...................................................................................2 2.1TestEnvironment............................................................................2 2.2TestEquipment...............................................................................2 2.3TestPrinciple...................................................................................2 3.TestResults..............................................................................................3 3.1GainandEfficiency..........................................................................3 3.2RadiationPattern............................................................................4 4.AntennaDimensions................................................................................6 5.EUTPhoto................................................................................................6 6.TestSetupPhoto......................................................................................7 1 1.GeneralDescription ManufacturerHangzhouTuyaInformationTechnologyCo.,Ltd Address Room701,Building3,MoreCenter,No.87GuDunRoad, Hangzhou,Zhejiang,China TestLocation Room106,Building3,LetongSciencePark,No.500, QiuyiRoad,BinjiangDistrict,Hangzhou ProductNameZS3L Antenna Productmodel ZS3L AntennaType PCBAntenna TestItems Gain;Efficiency;RadiationPattern TestFrequency 2400-2500MHz TestStandard ANSI/IEEEStd149-1979 2 2.TestConfigurations 2.1TestEnvironment Temperature(°C)24 Humidity(%RH)59 AtmosphericPressure(kPa)100.5 2.2TestEquipment TestSystemTEM24Multi-probeMicrowaveChamber TestInstrumentAgilentE5071B 2.3TestPrinciple 3 3.TestResults 3.1GainandEfficiency Frequency(MHz)PeakGain(dBi)Efficiency(%) 2400 0.8249.43 2410 0.7849.43 2420 0.7848.42 2430 0.6748.19 2440 0.9149.32 2450 1.1152.00 2460 0.9949.55 2470 0.66 248 45.19 0 0.20 249 41.11 0 0.20 250 38.99 0 0.4940.83 4 3.2RadiationPattern Phi02D Phi902D 5 Theta902D 2480MHz3D 6 4.AntennaDimensions 7 5.Test Setup Photo

ShenzhenQCTestingLaboratoryCo.,Ltd. Page 1 of 4 Address:Eastof1/F.,BuildingE,XinghongSciencePark,No.111,ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'anDistrict,Shenzhen,Guangdong,China Tel:0755-23008269Fax:0755-23726780http://www.qctest.com.cn ProductName: SmartGateway TestModelNo.: PG-W01 EUTConstructionalDetails ShenzhenQCTestingLaboratoryCo.,Ltd. Page 2 of 4 Address:Eastof1/F.,BuildingE,XinghongSciencePark,No.111,ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'anDistrict,Shenzhen,Guangdong,China Tel:0755-23008269Fax:0755-23726780http://www.qctest.com.cn ShenzhenQCTestingLaboratoryCo.,Ltd. Page 3 of 4 Address:Eastof1/F.,BuildingE,XinghongSciencePark,No.111,ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'anDistrict,Shenzhen,Guangdong,China Tel:0755-23008269Fax:0755-23726780http://www.qctest.com.cn ShenzhenQCTestingLaboratoryCo.,Ltd. Page 4 of 4 Address:Eastof1/F.,BuildingE,XinghongSciencePark,No.111,ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'anDistrict,Shenzhen,Guangdong,China Tel:0755-23008269Fax:0755-23726780http://www.qctest.com.cn ------End------

FCCID:2AIT9-PG-W01 Length:300mm Width:150mm

ShenzhenQCTestingLaboratoryCo.,Ltd. Page 1 of 4 Address:Eastof1/F.,BuildingE,XinghongSciencePark,No.111,ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'anDistrict,Shenzhen,Guangdong,China Tel:0755-23008269Fax:0755-23726780http://www.qctest.com.cn ProductName: SmartGateway TestModelNo.: PG-W01 EUTConstructionalDetails： ShenzhenQCTestingLaboratoryCo.,Ltd. Page 2 of 4 Address:Eastof1/F.,BuildingE,XinghongSciencePark,No.111,ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'anDistrict,Shenzhen,Guangdong,China Tel:0755-23008269Fax:0755-23726780http://www.qctest.com.cn ShenzhenQCTestingLaboratoryCo.,Ltd. Page 3 of 4 Address:Eastof1/F.,BuildingE,XinghongSciencePark,No.111,ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'anDistrict,Shenzhen,Guangdong,China Tel:0755-23008269Fax:0755-23726780http://www.qctest.com.cn WIFIAntenna ShenzhenQCTestingLaboratoryCo.,Ltd. Page 4 of 4 Address:Eastof1/F.,BuildingE,XinghongSciencePark,No.111,ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'anDistrict,Shenzhen,Guangdong,China Tel:0755-23008269Fax:0755-23726780http://www.qctest.com.cn ------End------ ZIGBEE Antenna

ShenzhenQCTestingLaboratoryCo.,Ltd. Page1of2 Address:Eastof1/F.,BuildingE,XinghongSciencePark,No.111,ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'anDistrict,Shenzhen,Guangdong,China Tel:0755-23008269Fax:0755-23726780http://www.qctest.com.cn FCCID:2AIT9-PG-W01 RFExposureEvaluation FCCKDBpublication447498D01GeneralRFExposureGuidancev06:MobileandPortableDevicesRF ExposureProceduresandEquipmentAuthorizationPolicies. Limits Thecriterialistedinthefollowingtableshallbeusedtoevaluatetheenvironmentimpactofhumanexposure toradiofrequency(RF)radiationasspecifiedin1.1307(b) LimitsforMaximumPermissibleExposure(MPE) Frequencyrange (MHz) Electricfield strength (V/m) Magneticfieldstrength (A/m) Powerdensity (mW/cm 2 ) Averagingtime (minutes) (A)LimitsforOccupational/ControlledExposures 0.3–3.06141.63*(100)6 3.0–301842/f4.89/f*(900/f 2 )6 30–30061.40.1631.06 300–1500f/3006 1500–100,00056 (B)LimitsforGeneralPopulation/UncontrolledExposure 0.3–1.346141.63*(100)30 1.34–30824/f2.19/f*(180/f 2 )30 30–30027.50.0730.230 300–1500f/150030 1500–100,0001.030 f=frequencyinMHz Friistransmissionformula:Pd=(Pout*G)/(4*pi*r 2 ) Where Pd=powerdensityinmW/cm 2 ,Pout=outputpowertoantennainmW; G=gainofantennainlinearscale,Pi=3.1416; R=distancebetweenobservationpointandcenteroftheradiatorincm PdidthelimitofMPE,1mW/cm 2 .Ifweknowthemaximumgainoftheantennaandthetotalpowerinputto theantenna,throughthecalculation,wewillknowthedistancerwheretheMPElimitisreached. TestProcedure SoftwareprovidedbyclientenabledtheEUTtotransmitandreceivedataatlowest,andhighestchannel individually. ShenzhenQCTestingLaboratoryCo.,Ltd. Page2of2 Address:Eastof1/F.,BuildingE,XinghongSciencePark,No.111,ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'anDistrict,Shenzhen,Guangdong,China Tel:0755-23008269Fax:0755-23726780http://www.qctest.com.cn TestResultofRFExposureEvaluation Forzigbee Antenna1Gain:1.11dBi Test Mode Minimum Separatio nDistance (cm) Output Power (dBm) Target power (dBm) Target power (mW) Antenna Gain (Numeric) Power Density Limit (mW/cm 2 ) Power Density At20cm (mW/cm 2 ) Test Results 240520.008.118±17.9431.2910.0020Pass 244020.008.038±17.9431.2910.0020Pass 247520.007.877±16.3101.2910.0016Pass For2.4GWIFI AntennaGain:1.05dBi Test Mode Minimum Separation Distance (cm) Output Power (dBm) Target power (dBm) Target power (mW) Antenna Gain (Numeric) Power Density Limit (mW/cm 2 ) Power Density At20cm (mW/cm 2 ) Test Results 802.11b20.008.708±17.9431.2710.0020Pass 802.11g 20.0013.97 14±1 31.6231.2710.0080 Pass 802.11 n(HT20) 20.0013.1713±125.1191.2710.0064Pass 802.11 n(HT40) 20.0012.9413±125.1191.2710.0064Pass Note:BLEand2.4GWIFIcannottransmitatthesametime Conclusion: ThemeasurementresultscomplywiththeFCCLimitper47CFR2.1091fortheuncontrolledRF Exposure.

Shenzhen QC Testing Laboratory Co., Ltd. Report No.: QCT25JR-0259E-01 Page 1 of 36 Address: East of 1/F., Building E, Xinghong Science Park, No.111, Shuiku Road, Fenghuanggang, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Tel: 0755-23008269 Fax: 0755-23726780 http://www.qctest.com.cn FCC PART 15.247 TEST REPORT On Behalf of PGST CO., LTD 1st Floor, 9th Block, Huafu Industrial Park, Langkou Community, Dalang,Longhua District, Shenzhen City FCC ID: 2AIT9-PG-W01 Model: PG-W01 Jan. 07, 2026 T hi s Repor t Concer ns: Or iginal Report Equi pm ent T ype: Sm ar t G at eway Test Engineer: Fan Yang/ Report Number: QCT25JR-0259E-01 Test Date: Oct. 27~Nov. 10, 2025 Reviewed By: Vincent Yang/ Approved By: Kendy Wang/ Prepared By: Shenzhen QC Testing Laboratory Co., Ltd. East of 1/F., Building E, Xinghong Science Park, No.111, Shuiku Road, Fenghuanggang, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Tel: 0755-23008269 Fax: 0755-23726780 Shenzhen QC Testing Laboratory Co., Ltd. Report No.: QCT25JR-0259E-01 Page 2 of 36 Address: East of 1/F., Building E, Xinghong Science Park, No.111, Shuiku Road, Fenghuanggang, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Tel: 0755-23008269 Fax: 0755-23726780 http://www.qctest.com.cn Table of Contents 1. GENERAL INFORMATION ................................................................................................. 5 1.1 Product Description for Equipment under Test (EUT) ............................................................. 5 1.2 System Test Configuration ...................................................................................................... 6 1.3 Test Facility.............................................................................................................................. 7 1.4 Measurement Uncertainty ........................................................................................................ 7 2. SUMMARY OF TEST RESULTS ........................................................................................ 8 3. LIST OF TEST AND MEASUREMENT INSTRUMENTS .................................................... 9 3.1 Conducted Emission Test ........................................................................................................ 9 3.2 Radiated Emission Test ........................................................................................................... 9 3.3 RF Conducted test ................................................................................................................. 10 4. ANTENNA REQUIREMENT .............................................................................................. 11 5. CONDUCTED EMISSIONS ............................................................................................... 12 5.1 Applicable Standard............................................................................................................... 12 5.2 Limit ....................................................................................................................................... 12 5.3 Test setup .............................................................................................................................. 12 5.4 EMI Test Receiver Setup ....................................................................................................... 12 5.5 Test procedure....................................................................................................................... 12 5.6 Test Data ............................................................................................................................... 12 6. CONDUCTED PEAK OUTPUT POWER ........................................................................... 15 6.1 Applicable Standard............................................................................................................... 15 6.2 Limit ....................................................................................................................................... 15 6.3 Test setup .............................................................................................................................. 15 6.4 Test Procedure ...................................................................................................................... 16 6.5 Test Data ............................................................................................................................... 16 7. CHANNEL BANDWIDTH & 99% OCCUPIED BANDWIDTH ........................................... 17 7.1 Applicable Standard............................................................................................................... 17 7.2 Limit ....................................................................................................................................... 17 7.3 Test setup .............................................................................................................................. 17 7.4 Test Procedure ...................................................................................................................... 17 7.5 Test Data ............................................................................................................................... 17 8. POWER SPECTRAL DENSITY ........................................................................................ 22 8.1 Applicable Standard............................................................................................................... 22 8.2 Limit ....................................................................................................................................... 22 8.3 Test setup .............................................................................................................................. 22 8.4 Test Procedure ...................................................................................................................... 22 8.5 …

Text truncated - open the document above for the full version.

ShenzhenQCTestingLaboratoryCo.,Ltd. ReportNo.:QCT25JR-0259E-02Page1of73 Address:Eastof1/F.,BuildingE,XinghongSciencePark,No.111,ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'anDistrict,Shenzhen,Guangdong,China Tel:0755-23008269Fax:0755-23726780http://www.qctest.com.cn FCCPART15.247 TESTREPORT OnBehalfof PGSTCO.,LTD 1stFloor,9thBlock,HuafuIndustrialPark,LangkouCommunity,Dalang,Longhua District,ShenzhenCity FCCID:2AIT9-PG-W01 Model:PG-W01 Jan.07,2026 ThisReportConcerns: OriginalReport EquipmentType: SmartGateway TestEngineer:FanYang ReportNumber:QCT25JR-0259E-02 TestDate:Oct.27~Nov.11,2025 ReviewedBy:VincentYang ApprovedBy:KendyWang PreparedBy: ShenzhenQCTestingLaboratoryCo.,Ltd. Eastof1/F.,BuildingE,XinghongSciencePark,No.111, ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'an District,Shenzhen,Guangdong,China Tel:0755-23008269 Fax:0755-23726780 ShenzhenQCTestingLaboratoryCo.,Ltd. ReportNo.:QCT25JR-0259E-02Page2of73 Address:Eastof1/F.,BuildingE,XinghongSciencePark,No.111,ShuikuRoad,Fenghuanggang,XixiangStreet,Bao'anDistrict,Shenzhen,Guangdong,China Tel:0755-23008269Fax:0755-23726780http://www.qctest.com.cn TableofContents 1.GENERALINFORMATION.............................................................................................5 1.1ProductDescriptionforEquipmentunderTest(EUT)..............................................................5 1.2SystemTestConfiguration........................................................................................................6 1.3TestFacility...............................................................................................................................7 1.4MeasurementUncertainty.........................................................................................................7 2.SUMMARYOFTESTRESULTS....................................................................................8 3.LISTOFTESTANDMEASUREMENTINSTRUMENTS................................................9 3.1ConductedEmissionTest.........................................................................................................9 3.2RadiatedEmissionTest............................................................................................................9 3.3RFConductedtest..................................................................................................................10 4.ANTENNAREQUIREMENT.........................................................................................11 5.CONDUCTEDEMISSIONS...........................................................................................12 5.1ApplicableStandard................................................................................................................12 5.2Limit.........................................................................................................................................12 5.3Testsetup................................................................................................................................12 5.4EMITestReceiverSetup........................................................................................................12 5.5Testprocedure........................................................................................................................12 5.6TestData.................................................................................................................................12 6.CONDUCTEDPEAKOUTPUTPOWER......................................................................15 6.1ApplicableStandard................................................................................................................15 6.2Limit.........................................................................................................................................15 6.3Testsetup................................................................................................................................15 6.4TestProcedure........................................................................................................................15 6.5TestData.................................................................................................................................16 7.CHANNELBANDWIDTH&99%OCCUPIEDBANDWIDTH.......................................17 7.1ApplicableStandard................................................................................................................17 7.2Limit.........................................................................................................................................17 7.3Testsetup................................................................................................................................17 7.4TestProcedure........................................................................................................................17 7.5TestData.................................................................................................................................17 8.POWERSPECTRALDENSITY....................................................................................31 8.1ApplicableStandard................................................................................................................31 8.2Limit.........................................................................................................................................31 8.3Testsetup............................................................................…

Text truncated - open the document above for the full version.