2AIV6-S100Smart Phone

Notes before using: • Do not use the walkie talkie in an explosive environment (such as gas, dust, steam, etc.) or to charge the battery. • Please turn off the walkie-talkie while refueling or parking at the gas station. • Do not adapt or modify the machine whether there is any reason. • Do not let the walkie talkie by prolonged direct sunlight, do not place it near a heating appliance too • Do not put the walkie talkie at the extremely dusty, damp and splashing place and do not place it on an unstable surface. • The repair of the walkie talkie only can be carried out by professional technicians, do not disassemble by yourself. Note Please read above content carefully. It is very important for walkie talkie users to gain general knowledge and understandin of risk about the use of walkie talkie This guide is for reference only. Commitment does not constituted any form of ,and products to prevail in kind suo,pn 月 SUI 00只S 1111IHMAlI习＾习A1IIWl1 H:>no1 NI 0/0Vll tOO'l 3:JNIS ． lnr1co ® Accessory Installation e lnsertSIMcardandTFcard @o CITill f}To install the battery (a ) Insert the battery to connect with the metal at the bottom of the tank; (b ) Press down on the other end of the battery @ Close the battery cover (a) Push the battery cover until it clicks Into place, (b) Push the battery cover down; (c) Press battery latch. Open the battery cover: pull battery latch, and then open the battery cover. Latch 0 Install the beH clip (a) The belt clip should be aligned with the back screw hole (bl Install the belt clip by rotating sc r ew Un,n忒allthe belt凶p Uninstall the belt clip by rotating screw unt,I l oose Belt clip Functions Sheet 2 34 n 8 10 9 1 PT T 12 Navigation " L eft" 2 Customized Key 13 Navigation "Up" 3 Volume+ key 14 Navigation "Right" 4 Volume- key 15 Return button 5 Channel+ key 16 OK key 6 sos 17 Dial key 7 Channel - key 18 Navigation "Down" 8 M6 Port 19 Power on / of 9 Mute ke y 20 Speaker 10 USB Port 21 MIC 11 Menu Key NO. Name Function 1 PTT button PT T call 2 User-defined Short press L s c o r c e k e s n c a r ewe a n ke( scr ) e en asleep/ L ong press Broadcast the validity of PTT license 3 Volume+ button S Lo h n o g rt p p re re s s s s V v o o l l u u m m e e m up a xi mi z ation 4 Volume-button Short press volume down Long press Volume minimi z ation 5 Group switch button Short press Switch current channel Long p「essVoice playback 6 SO S emer gency p L o re n s g s p P re TT ss b : u L tt o o n n g to pr ca es ns c e 3s l t S h e O a S l a a rm larm , button 7 Group switch button Short press Switch group Long press Broadcast current battery 9 Mute button Short press Turn on mute mode , Press again restore 11 Confirm button/ Click to enter the function menu, select t h e function menu button menu by scrolling up/ down 12 Scroll left button Click to scroll left the menu 13 Sc『ollup button Click to scroll up the menu 14 Scroll right button Click to scroll right the menu 1 5 Return/Exit button Return to the previous function list Confirm button/ Short press Confirmation func加n 1 6 OK button Long press Press and hold for 3 seconds to turn on/ off the flashliaht 18 Scroll down button Click to scroll down the menu Short p v p e re r r e s s o s s n / · o : P ff Lo re c s k s s a c n re d e h n o ( l T d u f m o r o ff/ on scree n ) 19 Power button Long 3 seconds to power Basic function • Power on Press and hold the power button for 3 seconds to沁weron. • Power off Press and hold the power button for 3 seconds to power off If the device 1s ,n the charging state at this time, the device lights up 1n red a心displaysthe current battery level • User login Display the current user login information , after the user login successfull y , Calling used Press the PTT button to talk. After the app logs 1n normally, the breathing light starts to flash 1n green If the device is in call statue, the led light lights up red; If the device is in listening status, the led light is green, If the current speaking is occupied, means someone is talking, the PTT button is invalid The maximum call per person is limited to 60 seconds, if it exceeds 60 seconds, the speaking will be automa廿callyreleased (can be set to 1- 60s by APP) • Voice playback and battery broadcast Short press (5) button to switch group Long press (5) button, playback last ten voices; press the PTT button, automatically return to the last voice playback Short press (7) button to switch group Long press the (7) button, broadcast current battery • Flashlight Press and hold (16) button for 3 seconds (OK button) , turn on/off flashlight System Parameter Operating system Android Wo『kingtemperature -20't - .so'C Storage temperature -40'C一十85'C Voltage 3.BV Support 2G/3G/4G/GPS Size Weight EU Network support us 64 5叮292*26mm -220g F OO B1/3/7/8/20/28 TOD 838/40 WCDMA 81/8 GSM 83/8 FDD B2/4/5/7/12/17 TDD B38/40 W CDMA B2/4/5 GSM B2/5 Sound output power 2W@1 0%d istortion • Battery Safe Don't use the metal objects with two poles of the battery to docking, or contact with the endpoint of the battery , to avoid the battery short circuit, as well as damage caused by battery overheating, Don't expose the battery to high temperatu『eor fever around the device, and battery overheating may cause an explosion Don't disassemble or modify the battery, insert foreign obJects or liquid ont「us1on,1n order to avood battery leakage, overheating, causing a fire or explosion If a battery leaks, don't contact with skin or eyes. If contact, immediately rinse with water and go lo hospital for medical treatment If the battery 1s 1n the process of using, charging or saving, which have d1scolorat1on, deformation, abnormal heating phenomenon, please stop using and replace with new battery Don't throw batteries In a fire, otherwise It wlll cause fire and explosion Don't let children touch the battery, to avoid accidents Don't use a damaged battery. When the standby time of the device is s1gn1f1cantly shorter than normal, please replace the battery Dispose of batteri…

Text truncated - open the document above for the full version.

Fax: Tel: Add: E-mail: [email protected] Date: 2020/7/30 FEDERAL COMMUNICATIONS COMMISSION Authoriza tion and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern Dear Sir/Madam, We, Shenzhen Inrico Electronics Co.,Ltd , hereby authorize Bay Are a Compliance Laboratories Corp. to act as a laboratory for testing and test report generation for the following project(s): (Product name: Smart Phone, Model name: S100, PU1Z81WAA15A. FCC ID:2AIV6 -S100) The chipset MT6739 supports LTE Band, But only Band 2/4/5/7/12/17/38/40 were active,The other were disable by software. Shenzhen Inrico Electronics Co.,Ltd 3/F, Building NO.118, High Tech Industrial Park, 72 Guowei Road, Luohu District, Shenzhen China 0755-83273589 0 755-82689912 Sincerely Yours , Client’s signature Printed Name: Wenshun Zhang Title: Manager

Shenzhen Inrico Electronics Co.,Ltd Add: 3/F, Building No.1 18, High Tech Industrial Park, 72 Guowei Road, Luohu District, Shenzhen China TEL: 0755-83273589 FAX: 0755-82689912 Email: [email protected] DECLARATION OF SIMILARITY Date: 2020/6/2 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir or Madam: We, Shenzhen Inrico Electronics Co.,Ltd, hereby declare that the product: Smart Phone, FCC ID: 2AIV6‐S100 model: PU1Z81WAA15A is electrically identical with the model: S100 which was tested by BACL with the same electromagnetic emissions and electromagnetic compatibility characteristics. A description of the differences between those models and that are declared similar are as follows: They are the same product, and just the different model name, the rest are the same. Please contact me should there be need for any additional clarification or information. Best Regards, Signature: Printed Name: Zhang Wenshun Title: Manager

QA-FR-170-B Shenzhen Inrico Electronics Co.,Ltd ADD: 3/F, Building No.118, High Tech Industrial Park, 72 Guowei Road, Luohu District, Shenzhen, China TEL: 0755-83273589 FAX: 0755-82689912 E-mail: [email protected] FCC Authorization Date: 2020/7/30 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We , Shenzhen Inrico Electronics Co.,Ltd, hereby authorizes Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Client’s signature Printed Name: Wenshun Zhang Title: Manager

QA-FR-171-A Shenzhen Inrico Electronics Co.,Ltd Add: 3/F, Building No.118, High Tech Industrial Park, 72 Guowei Road, Luohu District, Shenzhen, China Tel: 0755-83273589 Fax: 0755-82689912 Email: [email protected] FCC Confidential Authorization Date: 2020/7/30 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AIV6‐S100 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Shenzhen Inrico Electronics Co.,Ltd hereby requests long-term confidential treatment of information accompanying this application as outlined below: •Block Diagram •Schematics •Operation Description •Parts List/Tune up procedure The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature: Printed Name: Wenshun Zhang Title: Manager

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS

FCC ID:2AIV6-S100 FCC ID:2AIV6-S100

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS Chip Chip Chip Aux Antenna Main Antenna GPS ANT

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Dongguan). This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA* or any agency of the Federal Government. * This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “*”. SAR EVALUATION REPORT For Shenzhen Inrico Electronics Co.,Ltd 3/F, Building No.118, High Tech Industrial Park, 72 Guowei Road, Luohu District, Shenzhen FCC ID: 2AIV6-S100 Report Type: Original Report Product Type: Smart Phone Report Number: RDG200601009-20 Report Date: 2020-08-12 Reviewed By: Rocky Xiao RF Engineer Prepared By: Bay Area Compliance Laboratories Corp. (Dongguan) No.69 Pulongcun, Puxinhu Industry Area, Tangxia, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200601009-20 SAR Evaluation Report 2 of 79 Attestation of Test Results EUT Information EUT Description Smart Phone Tested Model S100 Multiple Model PU1Z81WAA15A FCC ID 2AIV6-S100 Serial Number RDG200601009-SA-S1 Test Date 2020-07-07~ 2020-07-10 MODE Max. SAR Level(s) Reported(W/kg) Limit (W/kg) Head Mode GSM 850 1g Head SAR 0.23 1.6 PCS 1900 1g Head SAR 0.32 WCDMA Band 2 1g Head SAR 0.30 WCDMA Band 4 1g Head SAR 0.16 WCDMA Band 5 1g Head SAR 0.23 LTE Band 2 1g Head SAR 0.30 LTE Band 4 1g Head SAR 0.25 LTE Band 5 1g Head SAR 0.20 LTE Band 7 1g Head SAR 0.49 LTE Band 12&17 1g Head SAR 0.24 LTE Band 38 1g Head SAR 0.21 LTE Band 40 1g Head SAR 0.23 Face Up Mode GSM 850 1g Head SAR 0.25 PCS 1900 1g Head SAR 0.27 WCDMA Band 2 1g Head SAR 0.30 WCDMA Band 4 1g Head SAR 0.25 WCDMA Band 5 1g Head SAR 0.21 LTE Band 2 1g Head SAR 0.37 LTE Band 4 1g Head SAR 0.22 LTE Band 5 1g Head SAR 0.22 LTE Band 7 1g Head SAR 0.21 LTE Band 12&17 1g Head SAR 0.11 LTE Band 38 1g Head SAR 0.11 LTE Band 40 1g Body SAR 0.14 Body Worn Mode GSM 850 1g Body SAR 0.36 PCS 1900 1g Body SAR 0.36 WCDMA Band 2 1g Body SAR 0.31 WCDMA Band 4 1g Body SAR 0.26 WCDMA Band 5 1g Body SAR 0.29 LTE Band 2 1g Body SAR 0.22 LTE Band 4 1g Body SAR 0.25 LTE Band 5 1g Body SAR 0.26 LTE Band 7 1g Body SAR 0.39 LTE Band 12&17 1g Body SAR 0.26 LTE Band 38 1g Body SAR 0.78 LTE Band 40 1g Body SAR 0.57 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200601009-20 SAR Evaluation Report 3 of 79 Applicable Standards FCC 47 CFR part 2.1093 Radiofrequenc y radiation exposure evaluation: portable devices RF Exposure Procedures: TCB Workshop April 2019 IEEE1528:2013 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques IEC 62209-1:2016 Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices – Part 1: Devices used next to the ear (Frequency range of 300 MHz to 6 GHz) KDB procedures KDB 447498 D01 General RF Exposure Guidance v06 KDB 648474 D04 Handset SAR v01r03 KDB 865664 D01 SAR Measurement 100 MHz to 6 GHz v01r04 KDB 865664 D02 RF Exposure Reporting v01r02 KDB 941225 D01 3G SAR Procedures v03r01 KDB 941225 D05 SAR for LTE Devices v02r05 Note: This wireless device has been shown to be capable of compliance for localized specific absorption rate (SAR) for General Population/Uncontrolled Exposure limits specified in FCC 47 CFR part 2.1093 and has been tested in accordance with the measurement procedures specified in IEEE 1528-2013 and RF exposure KDB procedures. The results and statements contained in this report pertain only to the device(s) evaluated. Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200601009-20 SAR Evaluation Report 4 of 79 TABLE OF CONTENTS DOCUMENT REVISION HISTORY ......................................................................................................................... 5 EUT DESCRIPTION .................................................................................................................................................... 6 TECHNICAL SPECIFICATION ......................................................................................................................................... 6 REFERENCE, STANDARDS, AND GUIDELINES .................................................................................................. 7 SAR LIMITS ................................................................................................................................................................. 8 FACILITIES .................................................................................................................................................................. 9 DESCRIPTION OF TEST SYSTEM ........................................................................................................................ 10 EQUIPMENT LIST AND CALIBRATION ............................................................................................................. 16 EQUIPMENTS LIST & CALIBRATION INFORMATION .................................................................................................... 16 SAR MEASUREMENT SYSTEM VERIFICATION .............................................................................................. 17 LIQUID VERIFICATION ............................................................................................................................................... 17 SYSTEM ACCURACY VERIFICATION ........................................................................................................................... 20 SAR SYSTEM VALIDATION DATA ...........................................................................................................…

Text truncated - open the document above for the full version.

PROBE CALIBRATION CERTIFICATES DIPOLE CALIBRATION CERTIFICATES

Report No.: RDG200601009-20 SAR Plots Plot 1# Plot 1#: GSM 850_Head Left Cheek_Mid DUT: Smart Phone; Type: S100; Serial: RDG200601009-SA-S1 Communication System:Generic GSM; Frequency: 836.6 MHz;Duty Cycle: 1:8 Medium parameters used: f = 836.6 MHz; σ = 0.908 S/m; ε r = 40.826; ρ = 1000 kg/m 3 Phantom section: Left Section DASY5 Configuration:  Probe: EX3DV4 - SN7329; ConvF(9.97, 9.97, 9.97) @ 836.6 MHz; Calibrated: 2019/10/22  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn772; Calibrated: 2019/10/6  Phantom: SAM (30deg probe tilt) with CRP v5.0_20150321; Type: QD000P40CD; Serial: TP:1874  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (61x111x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.230 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 7.843 V/m; Power Drift = -0.19 dB Peak SAR (extrapolated) = 0.254 W/kg SAR(1 g) = 0.181 W/kg; SAR(10 g) = 0.131 W/kg Maximum value of SAR (measured) = 0.229 W/kg 0 dB = 0.229 W/kg = -6.40 dBW/kg Report No.: RDG200601009-20 SAR Plots Plot 2# Plot 2#: GSM 850_Head Left Tilt_Mid DUT: Smart Phone; Type: S100; Serial: RDG200601009-SA-S1 Communication System:Generic GSM; Frequency: 836.6 MHz;Duty Cycle: 1:8 Medium parameters used: f = 836.6 MHz; σ = 0.908 S/m; ε r = 40.826; ρ = 1000 kg/m 3 Phantom section: Left Section DASY5 Configuration:  Probe: EX3DV4 - SN7329; ConvF(9.97, 9.97, 9.97) @ 836.6 MHz; Calibrated: 2019/10/22  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn772; Calibrated: 2019/10/6  Phantom: SAM (30deg probe tilt) with CRP v5.0_20150321; Type: QD000P40CD; Serial: TP:1874  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (61x111x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.159 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 9.707 V/m; Power Drift = -0.15 dB Peak SAR (extrapolated) = 0.172 W/kg SAR(1 g) = 0.134 W/kg; SAR(10 g) = 0.104 W/kg Maximum value of SAR (measured) = 0.161 W/kg 0 dB = 0.161 W/kg = -7.93 dBW/kg Report No.: RDG200601009-20 SAR Plots Plot 3# Plot 3#: GSM 850_ Head Right Cheek_ Mid DUT: Smart Phone; Type: S100; Serial: RDG200601009-SA-S1 Communication System:Generic GSM; Frequency: 836.6 MHz;Duty Cycle: 1:8 Medium parameters used: f = 836.6 MHz; σ = 0.908 S/m; ε r = 40.826; ρ = 1000 kg/m 3 Phantom section: Right Section DASY5 Configuration:  Probe: EX3DV4 - SN7329; ConvF(9.97, 9.97, 9.97) @ 836.6 MHz; Calibrated: 2019/10/22  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn772; Calibrated: 2019/10/6  Phantom: SAM (30deg probe tilt) with CRP v5.0_20150321; Type: QD000P40CD; Serial: TP:1874  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (61x111x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.274 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 7.225 V/m; Power Drift = -0.10 dB Peak SAR (extrapolated) = 0.317 W/kg SAR(1 g) = 0.220 W/kg; SAR(10 g) = 0.157 W/kg Maximum value of SAR (measured) = 0.287 W/kg 0 dB = 0.287 W/kg = -5.42 dBW/kg Report No.: RDG200601009-20 SAR Plots Plot 4# Plot 4#: GSM 850_Head Right Tilt_Mid DUT: Smart Phone; Type: S100; Serial: RDG200601009-SA-S1 Communication System:Generic GSM; Frequency: 836.6 MHz;Duty Cycle: 1:8 Medium parameters used: f = 836.6 MHz; σ = 0.908 S/m; ε r = 40.826; ρ = 1000 kg/m 3 Phantom section: Right Section DASY5 Configuration:  Probe: EX3DV4 - SN7329; ConvF(9.97, 9.97, 9.97) @ 836.6 MHz; Calibrated: 2019/10/22  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn772; Calibrated: 2019/10/6  Phantom: SAM (30deg probe tilt) with CRP v5.0_20150321; Type: QD000P40CD; Serial: TP:1874  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (61x111x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.229 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 11.64 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 0.251 W/kg SAR(1 g) = 0.193 W/kg; SAR(10 g) = 0.146 W/kg Maximum value of SAR (measured) = 0.232 W/kg 0 dB = 0.232 W/kg = -6.35 dBW/kg Report No.: RDG200601009-20 SAR Plots Plot 5# Plot 5#: GSM 850_Face Up_Mid DUT: Smart Phone; Type: S100; Serial: RDG200601009-SA-S1 Communication System: Generic GSM; Frequency: 836.6 MHz;Duty Cycle: 1:8 Medium parameters used: f = 836.6 MHz; σ = 0.908 S/m; ε r = 40.826; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7329; ConvF(9.97, 9.97, 9.97) @ 836.6 MHz; Calibrated: 2019/10/22  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn772; Calibrated: 2019/10/6  Phantom: SAM (30deg probe tilt) with CRP v5.0_20150321; Type: QD000P40CD; Serial: TP:1874  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (61x101x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.302 W/kg Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 16.77 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 0.326 W/kg SAR(1 g) = 0.240 W/kg; SAR(10 g) = 0.177 W/kg Maximum value of SAR (measured) = 0.296 W/kg 0 dB = 0.296 W/kg = -5.29 dBW/kg Report No.: RDG200601009-20 SAR Plots Plot 6# Test Plot 6#: GSM 850 _Body Worn Back_Mid DUT: Smart Phone; Type: S100; Serial: RDG200601009-SA-S1 Communication System: Generic GSM; Frequency: 836.6 MHz;Duty Cycle: 1:8 Medium parameters used: f = 836.6 MHz; σ = 0.908 S/m; ε r = 40.826; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7329; ConvF(9.97, 9.97, 9.97) @ 836.6 MHz; Calibrated: 2019/10/22  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electroni…

Text truncated - open the document above for the full version.

Report No.: RDG200601009-20 Page 1 of 5 APPENDIX B EUT TEST POSITION PHOTOS Liquid depth ≥ 15cm Phantom: SAM (30deg probe tilt) with CRP v5.0_20150321; Type: QD000P40CD; Serial: TP:1874 Report No.: RDG200601009-20 Page 2 of 5 Head Face Up Setup Photo(10mm) Body (Worn) Back Setup Photo(0mm) 10mm Report No.: RDG200601009-20 Page 3 of 5 Body (Worn) Back with headset Setup Photo(0mm) Body (Worn) Back with MIC Setup Photo(0mm) Report No.: RDG200601009-20 Page 4 of 5 Head Left Cheek Setup Photo Head Left Tilt Setup Photo Report No.: RDG200601009-20 Page 5 of 5 Head Right Cheek Setup Photo Head Right Tilt Setup Photo

FCC PART 22H, PART 24E,PART 27 MEASUREMENT AND TEST REPORT For Shenzhen Inrico Electronics Co.,Ltd 3/F, Building No.118, High Tech Industrial Park, 72 Guowei Road, Luohu District, Shenzhen Report Type: Original Report Product Type: Smart Phone Re port Number: RDG200601009-00A Re port Date: 2020-07-23 Reviewed B y: Ivan Cao Assistant Manager Test Laboratory: Bay Area Compliance Laboratories Corp. (Dongguan) No.69 Pulongcun, Puxinhu Industry Area, Tangxia, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn FCC ID: 2AIV6-S100 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200601009-00A Page 2 of 229 TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 4 OBJECTIVE ................................................................................................................................................................... 4 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................................. 4 TEST METHODOLOGY .................................................................................................................................................. 4 MEASUREMENT UNCERTAINTY .................................................................................................................................... 5 TEST FACILITY ............................................................................................................................................................. 5 DECLARATIONS ............................................................................................................................................................ 5 SYSTEM TEST CONFIGURATION .......................................................................................................................... 6 JUSTIFICATION ............................................................................................................................................................. 6 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 7 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 7 CONFIGURATION OF TEST SETUP ................................................................................................................................. 7 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 7 SUMMARY OF TEST RESULTS ............................................................................................................................... 8 FCC §1.1310 & §2.1093- RF EXPOSURE .................................................................................................................... 9 APPLICABLE STANDARD .............................................................................................................................................. 9 TEST RESULT ............................................................................................................................................................... 9 FCC §2.1047 - MODULATION CHARACTERISTIC ............................................................................................ 10 FCC § 2.1046, § 22.913 (A) & § 24.232 (C) & § 27.50- RF OUTPUT POWER ...................................................... 11 APPLICABLE STANDARD ............................................................................................................................................ 11 TEST PROCEDURE ...................................................................................................................................................... 12 TEST EQUIPMENT LIST AND DETAILS ......................................................................................................................... 18 TEST DATA ................................................................................................................................................................ 18 FCC §2.1049, §22.917, §22.905 & §24.238 & §27.53- OCCUPIED BANDWIDTH ............................................... 45 APPLICABLE STANDARD ............................................................................................................................................ 45 TEST PROCEDURE ...................................................................................................................................................... 45 TEST EQUIPMENT LIST AND DETAILS ......................................................................................................................... 45 TEST DATA ................................................................................................................................................................ 45 FCC §2.1051, §22.917(A) & §24.238(A) & §27.53- SPURIOUS EMISSIONS AT ANTENNA TERMINALS ... 89 APPLICABLE STANDARD ............................................................................................................................................ 89 TEST PROCEDURE ...................................................................................................................................................... 89 TEST EQUIPMENT LIST AND DETAILS ......................................................................................................................... 89 TEST DATA ..........................................................................................................…

Text truncated - open the document above for the full version.

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200601009-00A Page 81 of 229 LTE Band 38: QPSK_5 MHz QPSK_10 MHz Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200601009-00A Page 82 of 229 QPSK_15 MHz QPSK_20 MHz Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200601009-00A Page 83 of 229 16QAM_5 MHz 16QAM_10 MHz Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200601009-00A Page 84 of 229 16QAM_15 MHz 16QAM_20 MHz Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200601009-00A Page 85 of 229 LTE Band 40 Lower: QPSK_5 MHz QPSK_10 MHz Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200601009-00A Page 86 of 229 16QAM_5 MHz 16QAM_10 MHz Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200601009-00A Page 87 of 229 Upper: QPSK_5 MHz QPSK_10 MHz Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200601009-00A Page 88 of 229 16QAM_5 MHz 16QAM_10 MHz Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200601009-00A Page 89 of 229 FCC §2.1051, §22.917(a) & §24.238(a…

Text truncated - open the document above for the full version.