2AIV6-S300Smart Phone

System Parameter Operaling system CPU Support Came戊 Size Weighl EU Network frequency us Screen Size Screen Resolution Transmit power Android MT6739V/WW ( MT6761V/WB Optional), 1 5GHz GPS /2G/3G/4G F ront Camera. 5MP, Back Camera 13 MP 155"74*15 8 mm -220g L TE-FDD B113/5/7/8/20 LTE-TDD B40 WCDMA B1/8 GSM 83/8 LTE-FDD B2/4/7/12/17/66 WCDMA B2/4/5 GSM. 82/5 5 i nch 480"960 pixel 2 3dBm-30dBm@-104dBm Sound output power 2W@10%d istortion Security information Before using the device operation, please read and observe the following precautions to ensure optimum device performance, and avoid dangerous or illegal situations • Electronic equipment The place of civllization provisions that has prohibited the use of wireless devices, don't use the device, otherwise it will lead to interference from other electronic devices or other hazards • Area with easy Ii『ingand explosion Refueling point (service station)or near inflammable and explosive materials, flammable and explosive chemical agents in any area, and don't use the device, the device may cause an explosion or fire • Operating environment Don't use the device in dusty, wet, dirty, or near magnetic fields, so as to avoid internal circuit equipment !allure Don't use this device in a thunde「storm,thunderstorms could result in equipment malfunction or shock hazard Don't place in direct sunlight for too long time Please avoid equipment and accessories to rain or moisture, otherwise it may be caused a fire or electric shock Don't place the device near a heat source or exposed flame sources, such as electric heaters, microwave, oven, water heater, fire, candles or other places may high temperatures • Accessories requirement Don't use unapproved or incompatible power supply, battery charger, otherwise, It may result In a fire, explosion or other hazard Only use manufacturer-approved equipment and equipment accessories for this model, if you use other types of accessories, it will be lead to accidental damage to the equipment, breach of warranty of the equipment • The charger security When fully charged or not charged, please disconnect the charger from the device and unplug the charger from the power outlet Don't drop or bump the charger, if the charger 1s damaged, don't continue to use, to avoid accidents Don't touch the device and charge「with wet hands to avoid short-circu巾ngdevice, malfunction or electric shock 匮 • Battery Safe Don't use lhe metal objects with two poles of the battery to docking, o『contactwith the endpoint of the battery, to avoid the battery short circuit, as well as damage caused by battery overheating, Don't expose the battery to high tempe『atureor fever around the device, and battery overheating may cause an explosion Don't disassemble or modify the battery, insert foreign objects or liquid intrusion, in order to avoid battery leakage, overheating, causing a fire or explosion If a battery leaks, don't contact with skin or eyes. If contact, immediately rinse with water and go to hospital for medical treatmenl If the ballery is in the process of using, charging or saving, which have discoloration, deformation, abnormal heating phenomenon, please stop using and replace with new ballery Don't throw batteries in a fire, otherwise it wlll cause fire and explosion Don't lel children touch the battery, to avoid accidents Don'I use a damaged battery When the standby time of the device is s1gnif1cantly shorter than normal, please replace the battery Dispose of batteries according to local regulations, not dispose as household waste Care and Cleaning • Do not lift up antenna or an external microphone di『ectly • Please use lint-free cloth to remove dust and stains from a radio to avoid poor contact • Please place the cover on headphone jacks when not in use • The keypad and sensors should be cleaned carefully with a lint­ free cloth moistened with clean water and a mild washing l1qu1d. Do not use strong corrosive solvents for cleaning warning Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined byby turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. SAR tests are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. Before a new model device is a available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC, Tests for each device are…

Text truncated - open the document above for the full version.

Fax: Tel: Add: E-mail: [email protected] Date: 2020/7/30 FEDERAL COMMUNICATIONS COMMISSION Authoriza tion and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern Dear Sir/Madam, We, Shenzhen Inrico Electronics Co.,Ltd , hereby authorize Bay Are a Compliance Laboratories Corp. to act as a laboratory for testing and test report generation for the following project(s): (Produc t name: Smart Phone, Model name: S300, FCC ID:2AIV6-S300) The chipset MT6739 supports LTE Band, But only Band 2/ 4/7/12/17/66 were active,The other were disable by software. Shenzhen Inrico Electronics Co.,Ltd 3/F, Building NO.118, High Tech Industrial Park, 72 Guowei Road, Luohu District, Shenzhen China 0755-83273589 0755-82689912 Sincerely Yours, Client’s signature Printed Name: Wenshun Zhang Title: Manager

QA-FR-170-B Shenzhen Inrico Electronics Co.,Ltd ADD: 3/F, Building No.118, High Tech Industrial Park, 72 Guowei Road, Luohu District, Shenzhen, China TEL: 0755-83273589 FAX: 0755-82689912 E-mail: [email protected] FCC Authorization Date: 2020/7/30 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We , Shenzhen Inrico Electronics Co.,Ltd, hereby authorizes Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Client’s signature Printed Name: Wenshun Zhang Title: Manager

QA-FR-171-A Shenzhen Inrico Electronics Co.,Ltd Add: 3/F, Building No.118, High Tech Industrial Park, 72 Guowei Road, Luohu District, Shenzhen, China Tel: 0755-83273589 Fax: 0755-82689912 Email: [email protected] FCC Confidential Authorization Date: 2020/7/30 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AIV6-S300 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Shenzhen Inrico Electronics Co.,Ltd hereby requests long-term confidential treatment of information accompanying this application as outlined below: •Block Diagram •Schematics •Operation Description •Parts List/Tune up procedure The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature: Printed Name: Wenshun Zhang Title: Manager

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS \ BASE \ \

M o d e l : S 3 0 0 N e t w o r k : LT E / W C D M A / G S M PoC Raido US S H E N Z H E N I N R I C O E L E C T R O N I C S C O. ,LT D I M E I x x x x x x x x x x S/N XSX300A0001 I M E I x x x x x x x x x x FCC ID: 2AIV6-S300

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS Antenna

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Dongguan). This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA* or any agency of the Federal Government. * This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “*”. SAR EVALUATION REPORT For Shenzhen Inrico Electronics Co.,Ltd 3/F, Building No.118, High Tech Industrial Park, 72 Guowei Road, Luohu District, Shenzhen FCC ID: 2AIV6-S300 Report Type: Original Report Product Type: Smart Phone Report Number: RDG200601011-20 Report Date: 2020-08-11 Reviewed By: Rocky Xiao RF Engineer Prepared By: Bay Area Compliance Laboratories Corp. (Dongguan) No.69 Pulongcun, Puxinhu Industry Area, Tangxia, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200601011-20 SAR Evaluation Report 2 of 70 Attestation of Test Results EUT Information EUT Description Smart Phone Tested Model S300 FCC ID 2AIV6-S300 Serial Number RDG200601011-SA-S1 Test Date 2020-07-03~ 2020-07-06 MODE Max. SAR Level(s) Reported(W/kg) Limit (W/kg) Head Mode GSM 850 1g Head SAR 0.08 1.6 PCS 1900 1g Head SAR 0.18 WCDMA Band 2 1g Head SAR 0.23 WCDMA Band 4 1g Head SAR 0.22 WCDMA Band 5 1g Head SAR 0.09 LTE Band 2 1g Head SAR 0.21 LTE Band 7 1g Head SAR 0.58 LTE Band 12&17 1g Head SAR 0.37 LTE Band 66&4 1g Head SAR 0.27 Face Up Mode GSM 850 1g Head SAR 0.51 PCS 1900 1g Head SAR 0.75 WCDMA Band 2 1g Head SAR 0.48 WCDMA Band 4 1g Head SAR 0.26 WCDMA Band 5 1g Head SAR 0.18 LTE Band 2 1g Head SAR 0.62 LTE Band 7 1g Head SAR 0.18 LTE Band 12&17 1g Head SAR 0.46 LTE Band 66&4 1g Head SAR 0.29 Body Worn Mode GSM 850 1g Body SAR 1.44 PCS 1900 1g Body SAR 1.30 WCDMA Band 2 1g Body SAR 0.79 WCDMA Band 4 1g Body SAR 0.36 WCDMA Band 5 1g Body SAR 0.44 LTE Band 2 1g Body SAR 1.32 LTE Band 7 1g Body SAR 1.38 LTE Band 12&17 1g Body SAR 0.71 LTE Band 66&4 1g Body SAR 0.49 Applicable Standards FCC 47 CFR part 2.1093 Radiofrequency radiation exposure evaluation: portable devices RF Exposure Procedures: TCB Workshop April 2019 IEEE1528:2013 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques IEC 62209-1:2016 Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices – Part 1: Devices used next to the ear (Frequency range of 300 MHz to 6 GHz) Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200601011-20 SAR Evaluation Report 3 of 70 Applicable Standards KDB procedures KDB 447498 D01 General RF Exposure Guidance v06 KDB 648474 D04 Handset SAR v01r03 KDB 865664 D01 SAR Measurement 100 MHz to 6 GHz v01r04 KDB 865664 D02 RF Exposure Reporting v01r02 KDB 941225 D01 3G SAR Procedures v03r01 KDB 941225 D05 SAR for LTE Devices v02r05 Note: This wireless device has been shown to be capable of compliance for localized specific absorption rate (SAR) for General Population/Uncontrolled Exposure limits specified in FCC 47 CFR part 2.1093 and has been tested in accordance with the measurement procedures specified in IEEE 1528-2013 and RF exposure KDB procedures. The results and statements contained in this report pertain only to the device(s) evaluated. Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200601011-20 SAR Evaluation Report 4 of 70 TABLE OF CONTENTS DOCUMENT REVISION HISTORY ......................................................................................................................... 5 EUT DESCRIPTION .................................................................................................................................................... 6 TECHNICAL SPECIFICATION ......................................................................................................................................... 6 REFERENCE, STANDARDS, AND GUIDELINES .................................................................................................. 7 SAR LIMITS ................................................................................................................................................................. 8 FACILITIES .................................................................................................................................................................. 9 DESCRIPTION OF TEST SYSTEM ........................................................................................................................ 10 EQUIPMENT LIST AND CALIBRATION ............................................................................................................. 16 EQUIPMENTS LIST & CALIBRATION INFORMATION .................................................................................................... 16 SAR MEASUREMENT SYSTEM VERIFICATION .............................................................................................. 17 LIQUID VERIFICATION ............................................................................................................................................... 17 SYSTEM ACCURACY VERIFICATION ........................................................................................................................... 19 SAR SYSTEM VALIDATION DATA ..................................................................................................................... 20 EUT TEST STRATEGY AND METHODOLOGY ................................................................................................. 25 TEST POSITIONS FOR DEVICE OPERATING NEXT TO A PERSON’S EAR..................................................…

Text truncated - open the document above for the full version.

PROBE CALIBRATION CERTIFICATES DIPOLE CALIBRATION CERTIFICATES

Report No.: RDG200601011-20 SAR Plots Plot 1# Plot 1#: GSM 850_ Head Left Cheek_Mid DUT: Smart Phone; Type: S300; Serial: RDG200601011-SA-S1 Communication System: Generic GSM; Frequency: 836.6 MHz;Duty Cycle: 1:8 Medium parameters used: f = 836.6 MHz; σ = 0.926 S/m; ε r = 40.817; ρ = 1000 kg/m 3 Phantom section: Left Section DASY5 Configuration:  Probe: EX3DV4 - SN7329; ConvF(9.97, 9.97, 9.97) @ 836.6 MHz; Calibrated: 2019/10/22  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn772; Calibrated: 2019/10/6  Phantom: SAM (30deg probe tilt) with CRP v5.0_20150321; Type: QD000P40CD; Serial: TP:1874  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (71x131x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.0888 W/kg Zoom Scan (5x6x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 4.476 V/m; Power Drift = -0.06 dB Peak SAR (extrapolated) = 0.0930 W/kg SAR(1 g) = 0.072 W/kg; SAR(10 g) = 0.056 W/kg Maximum value of SAR (measured) = 0.0858 W/kg 0 dB = 0.0858 W/kg = -10.67 dBW/kg Report No.: RDG200601011-20 SAR Plots Plot 2# Plot 2#: GSM 850_ Head Left Tilt _Mid DUT: Smart Phone; Type: S300; Serial: RDG200601011-SA-S1 Communication System: Generic GSM; Frequency: 836.6 MHz;Duty Cycle: 1:8 Medium parameters used: f = 836.6 MHz; σ = 0.926 S/m; ε r = 40.817; ρ = 1000 kg/m 3 Phantom section: Left Section DASY5 Configuration:  Probe: EX3DV4 - SN7329; ConvF(9.97, 9.97, 9.97) @ 836.6 MHz; Calibrated: 2019/10/22  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn772; Calibrated: 2019/10/6  Phantom: SAM (30deg probe tilt) with CRP v5.0_20150321; Type: QD000P40CD; Serial: TP:1874  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (71x131x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.0415 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 4.836 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 0.0440 W/kg SAR(1 g) = 0.036 W/kg; SAR(10 g) = 0.028 W/kg Maximum value of SAR (measured) = 0.0416 W/kg 0 dB = 0.0416 W/kg = -13.81 dBW/kg Report No.: RDG200601011-20 SAR Plots Plot 3# Plot 3#: GSM 850_ Head Right Cheek _Mid DUT: Smart Phone; Type: S300; Serial: RDG200601011-SA-S1 Communication System: Generic GSM; Frequency: 836.6 MHz;Duty Cycle: 1:8 Medium parameters used: f = 836.6 MHz; σ = 0.926 S/m; ε r = 40.817; ρ = 1000 kg/m 3 Phantom section: Right Section DASY5 Configuration:  Probe: EX3DV4 - SN7329; ConvF(9.97, 9.97, 9.97) @ 836.6 MHz; Calibrated: 2019/10/22  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn772; Calibrated: 2019/10/6  Phantom: SAM (30deg probe tilt) with CRP v5.0_20150321; Type: QD000P40CD; Serial: TP:1874  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (71x131x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.0632 W/kg Zoom Scan (6x8x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 3.512 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 0.0650 W/kg SAR(1 g) = 0.052 W/kg; SAR(10 g) = 0.043 W/kg Maximum value of SAR (measured) = 0.0592 W/kg 0 dB = 0.0592 W/kg = -12.28 dBW/kg Report No.: RDG200601011-20 SAR Plots Plot 4# Plot 4#: GSM 850_ Head Right Tilt _Mid DUT: Smart Phone; Type: S300; Serial: RDG200601011-SA-S1 Communication System: Generic GSM; Frequency: 836.6 MHz;Duty Cycle: 1:8 Medium parameters used: f = 836.6 MHz; σ = 0.926 S/m; ε r = 40.817; ρ = 1000 kg/m 3 Phantom section: Right Section DASY5 Configuration:  Probe: EX3DV4 - SN7329; ConvF(9.97, 9.97, 9.97) @ 836.6 MHz; Calibrated: 2019/10/22  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn772; Calibrated: 2019/10/6  Phantom: SAM (30deg probe tilt) with CRP v5.0_20150321; Type: QD000P40CD; Serial: TP:1874  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (71x131x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.0442 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 4.644 V/m; Power Drift = -0.08 dB Peak SAR (extrapolated) = 0.0460 W/kg SAR(1 g) = 0.037 W/kg; SAR(10 g) = 0.030 W/kg Maximum value of SAR (measured) = 0.0427 W/kg 0 dB = 0.0427 W/kg = -13.70 dBW/kg Report No.: RDG200601011-20 SAR Plots Plot 5# Plot 5#: GSM 850_ Face Up _Mid DUT: Smart Phone; Type: S300; Serial: RDG200601011-SA-S1 Communication System: Generic GSM; Frequency: 836.6 MHz;Duty Cycle: 1:8 Medium parameters used: f = 836.6 MHz; σ = 0.926 S/m; ε r = 40.817; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7329; ConvF(9.97, 9.97, 9.97) @ 836.6 MHz; Calibrated: 2019/10/22  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn772; Calibrated: 2019/10/6  Phantom: SAM (30deg probe tilt) with CRP v5.0_20150321; Type: QD000P40CD; Serial: TP:1874  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (71x131x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.624 W/kg Zoom Scan (5x6x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 17.13 V/m; Power Drift = -0.09 dB Peak SAR (extrapolated) = 0.700 W/kg SAR(1 g) = 0.476 W/kg; SAR(10 g) = 0.329 W/kg Maximum value of SAR (measured) = 0.615 W/kg 0 dB = 0.615 W/kg = -2.11 dBW/kg Report No.: RDG200601011-20 SAR Plots Plot 6# Plot 6#: GSM 850_ Body Worn Back _Mid DUT: Smart Phone; Type: S300; Serial: RDG200601011-SA-S1 Communication System: Generic GSM; Frequency: 836.6 MHz;Duty Cycle: 1:8 Medium parameters used: f = 836.6 MHz; σ = 0.926 S/m; ε r = 40.817; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7329; ConvF(9.97, 9.97, 9.97) @ 836.6 MHz; Calibrated: 2019/10/22  Sensor-Surface: 1.4mm (Mechanical Sur…

Text truncated - open the document above for the full version.

Report No.: RDG200601011-20 Page 1 of 5 APPENDIX B EUT TEST POSITION PHOTOS Liquid depth ≥ 15cm Phantom: SAM (30deg probe tilt) with CRP v5.0_20150321; Type: QD000P40CD; Serial: TP:1874 Report No.: RDG200601011-20 Page 2 of 5 Head Left Cheek Setup Photo Head Left Tilt Setup Photo Report No.: RDG200601011-20 Page 3 of 5 Head Right Cheek Setup Photo Head Right Tilt Setup Photo Report No.: RDG200601011-20 Page 4 of 5 Face Up Setup Photo (10mm) Body (Worn) Back Setup Photo (5mm) 10 mm 5 mm Report No.: RDG200601011-20 Page 5 of 5 Body Bottom Setup Photo (5mm) 5mm

FCC PART 22H, PART 24E,PART 27 MEASUREMENT AND TEST REPORT For Shenzhen Inrico Electronics Co.,Ltd 3/F, Building No.118, High Tech Industrial Park, 72 Guowei Road, Luohu District, Shenzhen Report Type: Original Report Product Type: Smart Phone Re port Number: RDG200601011-00B Re port Date: 2020-06-28 Reviewed B y: Ivan Cao Assistant Manager Test Laboratory: Bay Area Compliance Laboratories Corp. (Dongguan) No.69 Pulongcun, Puxinhu Industry Area, Tangxia, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn FCC ID:2AIV6-S300 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200601011-00B Page 2 of 195 TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 4 OBJECTIVE ................................................................................................................................................................... 4 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................................. 4 TEST METHODOLOGY .................................................................................................................................................. 4 MEASUREMENT UNCERTAINTY .................................................................................................................................... 5 TEST FACILITY ............................................................................................................................................................. 5 DECLARATIONS ............................................................................................................................................................ 5 SYSTEM TEST CONFIGURATION .......................................................................................................................... 6 JUSTIFICATION ............................................................................................................................................................. 6 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 6 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 7 CONFIGURATION OF TEST SETUP ................................................................................................................................. 7 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 7 SUMMARY OF TEST RESULTS ............................................................................................................................... 8 FCC §1.1310 & §2.1093- RF EXPOSURE .................................................................................................................... 9 APPLICABLE STANDARD .............................................................................................................................................. 9 TEST RESULT ............................................................................................................................................................... 9 FCC §2.1047 - MODULATION CHARACTERISTIC ............................................................................................ 10 FCC § 2.1046, § 22.913 (A) & § 24.232 (C) & § 27.50- RF OUTPUT POWER ...................................................... 11 APPLICABLE STANDARD ............................................................................................................................................ 11 TEST PROCEDURE ...................................................................................................................................................... 12 TEST EQUIPMENT LIST AND DETAILS ......................................................................................................................... 17 TEST DATA ................................................................................................................................................................ 17 FCC §2.1049, §22.917, §22.905 & §24.238 & §27.53- OCCUPIED BANDWIDTH ............................................... 37 APPLICABLE STANDARD ............................................................................................................................................ 37 TEST PROCEDURE ...................................................................................................................................................... 37 TEST EQUIPMENT LIST AND DETAILS ......................................................................................................................... 37 TEST DATA ................................................................................................................................................................ 37 FCC §2.1051, §22.917(A) & §24.238(A) & §27.53- SPURIOUS EMISSIONS AT ANTENNA TERMINALS ... 75 APPLICABLE STANDARD ............................................................................................................................................ 75 TEST PROCEDURE ...................................................................................................................................................... 75 TEST EQUIPMENT LIST AND DETAILS ......................................................................................................................... 75 TEST DATA ...........................................................................................................…

Text truncated - open the document above for the full version.

EXHIBIT D - TEST SETUP PHOTOGRAPHS Radiated Emission Below 1GHz View Radiated Emission Above 1GHz View