2AJ2B-K8Self-Service Kiosk

Accessories Specification Hexa-Core 1.8GHz Android 9 or 11 Processor OS Memory 21.5-inch LCD Touch Screen, Resolution1080*1920 Display 4GB RAM, 16GB ROM User Guide Self-Service Kiosk Paper Width 80mm, Φ80mm, with auto cutter Printing Speed: 150mm/s Thermal Printer Main Device1 set K8 Single-lens Camera Dual-lens Camera 3D Depth Sensing Camera Camera(Optional) Support 1D/2D Barcode Scanner Wi-Fi/Bluetooth/NFC Communications Audio Digital Audio Speaker Power Supply 24V/5A Wall-Mounting Bracket Floor-Stand Check-Out Desk Others(Optional) Operating temperature: -5°C~ 45°C Storage temperature: -25°C~ 60°C Environmental MDM (Optional) Mobile Device Management AC Power Adapter1 Piece Printing Paper1 Roll Key2 Pieces User Guide1 Volume Before using the device, ensure that all the accessories above are included in the package. If you have any problems, please contact the services provider of the distributors. 1. Use the key to open the front cover of the printer. Printing Paper Replacement 2. Trigger to open the paper bin cover. 3. After loading the thermal paper, close the paper bin cover and printer front cover. Tip: When you turn on the device at the first time, if the printer detects there is no paper, it will continue to beep until loading the paper. 4. Notes on the placement of print paper. (1)Put a roller in the middle of the paper. (2)Paper comes out at the top. (3)When placing the printing paper, pull the paper out a short way from the outlet and close the paper bin cover. Paper roll with roller Wall Mount Bracket Installation 1. Drill holes on the wall or other surface according to the mounting plate. It supposes each hole should has a diameter of 12mm and a depth of 45mm. 2. Use four M8 self-tapping screws to secure the mounting plate on the wall. 3. Assemble the brackets on the holes on the back of the device and secure them with four M6 screws. Please note that the direction of how brackets put. 4. Route the cables and connect to the device. 5. Align the device with the mounting plate and brackets, then secure the device on the mounting plate with two M6 screws. ※ Wall Mount Bracket is optional. Accessories Bracket2 Sets Mounting Plate1 Set M6 Screw6 Pieces M8 Self-Tapping Screw4 Pieces Floor-Stand Installation 1. Assemble the floor-stand on the base and secure them from the bottom with four M6 hexagon screws. 2. Assemble two brackets on the holes on the back of the device and secure them with four M6 screws. 3. Route the cables and connect to the device. 4. Secure the device to the floor-stand with four M6 screws. ※ Floor-Stand is optional. Accessories Floor-Stand1 Set Bracket2 Sets Base1 Set M6 Hexagon Screws4 Pieces M6 Screw8 Pieces Check-Out Desk Installation 1. Base on floor-stand installation steps, secure check-out desk bracket to the floor-stand with four M6 screws. 2. Secure check-out desk bracket to the check-out desk with four M6 screws. 3. Assemble two baffles on the check-out desk with four M4 screws. ※ Check-Out Desk is optional. Accessories Floor-Stand and Base1 Set Check-Out Desk1 Set Check-Out Desk Bracket1 Set M6 Screw8 Pieces M4 Screw4 Pieces Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Telepow 5 Bld, Z Foshan Tel: 0 7 Fax: 07 Email: m Date: 20 FEDER Authori 7435 O Colum b Ref: A t FCC I D Telepo w sought i pursuan Sincer e Signat u Mike M Product wer Commu Zone A, Han China 757-863378 757-8633789 mike@telpo 024-03-14 RAL COMM ization and akland Mil l bia, MD 210 ttestation St D: 2AJ2B-K wer Commu is not “cove nt to section ely, ure Mai t Director unication C ntian Techn 98 98 o.com MUNICATI Evaluation ls Road 046 tatements C K8 unication C ered” equip n 2.903 of th o., Ltd. nology Tow Att IONS COM Division FR 47 §2.9 o., Ltd. cer t pment prohib he FCC rule wn No.17 Sh testation L MMISSIONS 11(d)(5)(i) tifies that th bited from r es. henHai RD, C Letter S Filing he equipmen receiving an Nanhai Dis CFR 47 §2.91 nt for which n equipmen strict 1(d)(5)(i) Atte h authorizat nt authorizat estation Letter ion is tion r

Telepow 5 Bld, Z Foshan Tel: 0 7 Fax: 07 Email: m Date: 20 FEDER Authori 7435 O Colum b Ref: A t FCC I D Telepo w the appl “covere Sincer e Signat u Mike M Product wer Commu Zone A, Han China 757-863378 757-8633789 mike@telpo 024-03-14 RAL COMM ization and akland Mil l bia, MD 210 ttestation St D: 2AJ2B-K wer Commu lication, the ed” equipme ely, ure Mai t Director unication C ntian Techn 98 98 o.com MUNICATI Evaluation ls Road 046 tatements C K8 unication C e applicant i ent. o., Ltd. nology Tow Att IONS COM Division FR 47 §2.9 o., Ltd. (“t h is not identi wn No.17 Sh testation L MMISSIONS 11(d)(5)(ii) he applicant ified on the henHai RD, CF Letter S ) Filing t”) certifies e Covered L Nanhai Dis FR 47 §2.911 that as of th List as an ent strict (d)(5)(ii) Atte he date of th tity produci estation Letter he filing of ing r

U.S. AGENT LETTER OF ATTESTATION Date: 2024-03-14 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(7) Filing FCC ID: 2AJ2B-K8 Telepower Communication Co., Ltd. certifies that, as of the date of the filing of the application, Iconsigh Inc. is our designated U.S. agent for service of process for the above referenced FCC ID. Telepower Communication Co., Ltd. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Iconsigh Inc. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Company Name: Iconsigh Inc. Address: 2310 Homestead Road, Suite C1, Los Altos, CA, 94024, USA FRN: 0033398652 Tel.: +1 (408) 320-9867 Email: [email protected] Signed by (printed name): Benjamin Kaur Signature: Applicant: Telepower Communication Co., Ltd. Address: 5 Bld, Zone A, Hantian Technology Town No.17 ShenHai RD, Nanhai District Foshan China FRN: 0025951815 Tel: 0757-86337898 Email: [email protected] Signed by (printed name): Mike Mai Signature:

Telepower Communication Co., Ltd. 5 Bld, Zone A, Hantian Technology Town No.17 ShenHai RD, Nanhai District Foshan China Tel: 0757-86337898 Fax: 0757-86337898 Email: [email protected] QA-FR-170-B 7/29/2014 FCC Authorization Date: 2024-03-14 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We Telepower Communication Co., Ltd., the undersigned, hereby authorizes China Certification ICT Co., Ltd (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co., Ltd (Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: Mike Mai Product Director

Telepower Communication Co., Ltd. 5 Bld, Zone A, Hantian Technology Town No.17 ShenHai RD, Nanhai District Foshan China Tel: 0757-86337898 Fax: 0757-86337898 Email: [email protected] FCC Confidential Authorization Date: 2024-03-14 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AJ2B-K8 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Telepower Communication Co., Ltd. hereby requests long-term confidential treatment of information accompanying this application as outlined below: • Block Diagram • Schematics • Operation Description • Part list • Software Security Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature Mike Mai Product Director

Telepower Communication Co., Ltd. 5 Bld, Zone A, Hantian Technology Town No.17 ShenHai RD, Nanhai District Foshan China Tel: 0757-86337898 Fax: 0757-86337898 Email: [email protected] Date: 2024-03-14 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attestation letter Dear Sir or Madam, Our product Self-Service Kiosk, model: K8, FCC ID: 2AJ2B-K8, for marketing purpose, this product only supports BT(GFSK, π/4-DQPSK, 8DPSK), BLE 1M, 2.4G Wi-Fi(2412-2462MHz, 802.11b/g/n20/n40 modes), NFC(13.56 MHz), 5G Wi-Fi(5725-5850 MHz, 802.11 a/ ac20/ac40/ac80 modes).The other functions, bands and modes was disabled to use by manufacturer in the software, the end user has no capability to activate it. Sincerely, Signature: Mike Mai Product Director

China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-EXP Page 1 of 6 EUT EXTERNAL PHOTOGRAPHS China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-EXP Page 2 of 6 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-EXP Page 3 of 6 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-EXP Page 4 of 6 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-EXP Page 5 of 6 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-EXP Page 6 of 6

FCC ID: 2AJ2B-K8

Label Label Location Information

China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-INP Page 1 of 31 EUT INTERNAL PHOTOGRAPHS China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-INP Page 2 of 31 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-INP Page 3 of 31 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-INP Page 4 of 31 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-INP Page 5 of 31 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-INP Page 6 of 31 WIFI/Bluetooth antenna China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-INP Page 7 of 31 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-INP Page 8 of 31 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-INP Page 9 of 31 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-INP Page 10 of 31 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-INP Page 11 of 31 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-INP Page 12 of 31 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-INP Page 13 of 31 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-INP Page 14 of 31 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-INP Page 15 of 31 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-INP Page 16 of 31

China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-INP Page 17 of 31 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-INP Page 18 of 31 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-INP Page 19 of 31 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-INP Page 20 of 31 NFC Antenna China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-INP Page 21 of 31 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-INP Page 22 of 31 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-INP Page 23 of 31 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-INP Page 24 of 31 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-INP Page 25 of 31 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-INP Page 26 of 31 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-INP Page 27 of 31 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-INP Page 28 of 31 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-INP Page 29 of 31 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-INP Page 30 of 31 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-INP Page 31 of 31

RF EXPOSURE EVALUATION Applicant: Telepower Communication Co., Ltd. Address: 5 Bld, Zone A, Hantian Technology Town No.17 ShenHai RD, Nanhai District Foshan China FCC ID: 2AJ2B-K8 Product Name: Self-Service Kiosk Standard(s): 47 CFR §1.1310, 47 CFR §2.1091 447498 D01 General RF Exposure Guidance v06 The above device has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR231062479-00F Date Of Issue: 2024/3/18 Reviewed By: Calvin Chen Title: RF Engineer Approved By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-00F Page 2 of 6 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-00F Page 3 of 6 CONTENTS DOCUMENT REVISION HISTORY .......................................................................................... 4 FCC§1.1310 & §2.1091- MAXIMUM PERMISSIBLE EXPOSURE (MPE) ............................... 5 1.1 APPLICABLE STANDARD ...................................................................................................................... 5 1.2 MEASUREMENT RESULT ..................................................................................................................... 6 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-00F Page 4 of 6 DOCUMENT REVISION HISTORY Revision Number Report Number Description of Revision Date of Revision 1.0 CR231062479-00F Original Report 2024/3/18 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-00F Page 5 of 6 FCC§1.1310 & §2.1091- MAXIMUM PERMISSIBLE EXPOSURE (MPE) 1.1 Applicable Standard According to subpart §1.1310, systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091) (B) Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minutes) 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f²) 30 30–300 27.5 0.073 0.2 30 300–1500 / / f/1500 30 1500–100,000 / / 1.0 30 f = frequency in MHz; * = Plane-wave equivalent power density; According to §1.1310 and §2.1091 RF exposure is calculated. Calculation formula: Prediction of power density at the distance of the applicable MPE limit S = PG/4πR² = power density (in appropriate units, e.g. mW/cm 2 ); P = power input to the antenna (in appropriate units, e.g., mW); G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is normally numeric gain; R = distance to the center of radiation of the antenna (appropriate units, e.g., cm); For simultaneously transmit system, the calculated power density should comply with: China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-00F Page 6 of 6 1.2 Measurement Result Operation Modes Frequency (MHz) Antenna Gain Conducted output power including Tune-up Tolerance Evaluation Distance Power Density MPE Limit (dBi) (numeric)(dBm) (mW) (cm) (mW/cm 2 ) (mW/cm 2 ) BLE 2402-2480 3.95 2.48 14 25.12 20.00 0.0124 1 BT 2402-2480 3.95 2.48 8 6.31 20.00 0.0031 1 2.4G WLAN 2412-2462 3.95 2.48 23 199.53 20.00 0.0986 1 5G WLAN 5725-5850 3.95 2.48 14 25.12 20.00 0.0124 1 NFC 13.56 0 1.00 -21.19 0.01 20.00 <<0.0001 0.98 Note: For NFC, the power of EUT: E Field@3m is 74.01dBuV/m =-21.19dBm (0.0076mW) Note: E[dBμV/m] = EIRP[dBm] + 95.2 for d = 3 m. The BT/BLE/2.4G WLAN/5G WLAN can’t transmit simultaneously,but NFC can transmit simultaneously with BT/BLE/2.4G WLAN/5G WLAN. = S 2.4G Wifi /S limit- 2.4G Wifi +S NFC /S limit- NFC =0.0986/1+0.0001/0.98 =0.099 < 1.0 Result: The device compliant the Exemption at 20cm distances. ===== END OF REPORT =====

TEST REPORT Applicant: Telepower Communication Co., Ltd. Address: 5 Bld, Zone A, Hantian Technology Town No.17 ShenHai RD, Nanhai District Foshan China FCC ID: 2AJ2B-K8 Product Name: Self-Service Kiosk Standard(s): 47 CFR Part 15, Subpart C(15.225) ANSI C63.10-2013 The above device has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR231062479-00E Date Of Issue: 2024/03/14 Reviewed By: Calvin Chen Title:RF Engineer A pproved By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-00E Page 2 of 40 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-00E Page 3 of 40 CONTENTS DOCUMENT REVISION HISTORY .......................................................................................... 5 1. GENERAL INFORMATION .................................................................................................... 6 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 6 1.2 DESCRIPTION OF TEST CONFIGURATION ........................................................................................... 7 1.2.1 EUT Operation Condition: ............................................................................................................................. 7 1.2.2 Support Equipment List and Details .............................................................................................................. 7 1.2.3 Support Cable List and Details ...................................................................................................................... 7 1.2.4 Block Diagram of Test Setup ......................................................................................................................... 7 1.3 MEASUREMENT UNCERTAINTY .......................................................................................................... 9 2. SUMMARY OF TEST RESULTS .......................................................................................... 10 3. REQUIREMENTS AND TEST PROCEDURES .................................................................. 11 3.1 AC LINE CONDUCTED EMISSIONS .................................................................................................... 11 3.1.1 Applicable Standard ..................................................................................................................................... 11 3.1.2 EUT Setup.................................................................................................................................................... 12 3.1.3 EMI Test Receiver Setup ............................................................................................................................. 12 3.1.4 Test Procedure ............................................................................................................................................. 13 3.1.5 Corrected Amplitude & Margin Calculation ................................................................................................ 13 3.2 RADIATED EMISSIONS ....................................................................................................................... 14 3.2.1 Applicable Standard ..................................................................................................................................... 14 3.2.2 EUT Setup.................................................................................................................................................... 14 3.2.3 EMI Test Receiver & Spectrum Analyzer Setup ......................................................................................... 15 3.2.4 Corrected Amplitude & Margin Calculation ................................................................................................ 15 3.3 20 DB EMISSION BANDWIDTH ........................................................................................................... 16 3.3.1 Applicable Standard ..................................................................................................................................... 16 3.3.2 EUT Setup.................................................................................................................................................... 16 3.3.3 Test Procedure ............................................................................................................................................. 16 3.4 FREQUENCY STABILITY ..........................................................................................................…

Text truncated - open the document above for the full version.

China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-00E-TSP Page 1 of 3 TEST SETUP PHOTOGRAPHS Conducted Emissions Front View Conducted Emissions Side View China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-00E-TSP Page 2 of 3 Radiated Emission Below 30MHz View Parallel Radiated Emission Below 30MHz View Perpendicular China Certification ICT Co., Ltd (Dongguan) Report No.: CR231062479-00E-TSP Page 3 of 3 Radiated Emission Below 30MHz View Ground-parallel Radiated Emission 30MHz-1GHz View