2AJ6BBHTTS0100TACTOSY

Tactosy is a wearable sleeve that provides haptic feedback on your arm surface. Using a total of 20 discrete vibro-tactile motors, it creates a continuous form of tactile sensation. It aims to enhance users’ experience in an audio-visually immersive environment. UNBOXING PRECAUTIONS Before using the Tactosy, please read this manual carefully. Wearable haptic sleeve Model Size Weight Connection Battery Charging Tactosy ( BHTTS0100) 5.5 - 14 inch (arm circumference) 250g Bluetooth Low Energy technology 3.8V, 2900mAh, 11.02Wh 5V, 2A max * * The number of Bluetooth dongle and USB cables is subject to change once purchased. Safety and Warnings * Avoid contact with bare skin. * Keep this product out of reach of small children. * Do not fasten the body straps excessively. * Never disassemble or modify the product. * Do not apply excessive force to the button. * Do not expose the device to extreme weather conditions. * Put the device only on the arms and legs. Care and Handling * Do not throw, drop, or expose the device to physical impact. * Keep Tactosy away from liquids, it is not water-resistant. * Do not store Tactosy in extreme cold or hot areas. * Do not use chemicals or cleaning solvents on the device. * Do not leave the device on charge when not in use, as overcharging may shorten the battery life. Tactosy(Main Controller+Strap) x 1 USB C-type Cable x 1 Manual x 1 Bluetooth Dongle x 1 01 02 03 04 Downloading software Downloads for the bHaptics Player software are available on our website, Pairing With the device and PC bluetooth turned on, and with the BLE dongle plugged into the PC, if needed, find the Tactot icon on the Player interface. Hover over the icon and click on the ‘pair’ button to find and pair the device. *Unpairing If a device has been paired before, it will connect automatically when turned on. To unpair, hover over the paired device’s icon and find the ‘unpair’ button. Testing haptic feedback The draw function can be found in the settings tab. Enjoy and feel the next-generation haptic suit. CONNECTING THE DEVICE BHAPTICS PLAYER bHaptics Plugin l We support plugins for Unity3D and Unreal Engine, which can be found in the Asset Store and Marketplace. Please refer to the plugin manuals for how to use them. For any other SDKs, please contact us directly. bHaptics Player l Desktop software, used for the optimization and control of your experience with TactSuit. Acting as a link between the device, application, and the bHaptics Designer, it controls the bluetooth connections, device settings, and more. bHaptics Designer l Web-based haptic feedback editing tool. Utilizing this tool, you can easily create a haptic feedback pattern without using a single line of code. Just like adding a subtitle to a video, you can add a haptic pattern to a video, a game, etc. © 2018 bhaptics.Inc All rights reserved DESIGNER Path Mode Draw lines within the dotted section to create continuous haptic feedback. Dot Mode Select specific vibro-tactile motors to activate. Contact our email for customer support. [email protected] / www.bhaptics.com www.bhaptics.com. *Firmware update When an update is available, a notification will pop up on the settings button. The update can be found in the settings tab. Keep the firmware updated to its latest version. For more information visit our site. *To use the Designer, enter the URL(https://designer.bhaptics.com) on your PC and Log-In. (Sign-up is required) Unpair AllPing All Vibro-tactile Motors FACE Strap TACTOSY SLEEVE OUTER FACE CONNECT 2 STEP 1 STEP Strap Strap Connection Loop Main Controller Battery Connection port Main Controller Strap Holder On/Off Switch (LED Status Indicator) LED Color Indication “RED” On BLE status SleepO X O X O Advertising Advertising Connected Connected Charging “GREEN” blinking “RED/YELLOW” blinking “GREEN/BLUE/CYAN” On “YELLOW/MAGENTA/WHITE” On Connecting device Turning Tactosy on. Press the On/Off button on the device to turn it on. The device will blink to indicate it is ready for bluetooth connection. Putting on the Tactosy Put the Tactosy on your forearm and tighten the strap accordingly. For optimum experience, minimize the loose space between your arm and the strap. Hold the strap and pull tight. Attach the velcro to the inside of your forearm with the strap pulled tight. * Size Control To account for more variation of sizes, unfold or fold the end of the strap before securing the velcro. *Tips for use - Using the bHaptics Player, users may test various vibration levels of vibro-tactile motors to optimize the Tactosy experience. - Keep track of the remaining battery through the bHaptics Player to prevent sudden shutdown of the Tactosy. * If Tactosy band does not fit comfortably, adjust the top strap to fiind a better fit. 2 2 1 WARNING & PRECAUTION This user manual is the basic manual for installation and operation and made for correct application of BHTTS0100 wireless product with CDMA technology. All users who install and use this 2.4/5G Dual-band RF Transceiver Module products must read and understand the contents of this manual. In addition, user must observe all safety warnings and precautions in order to prevent from any problem or malfunction and to avoid from physical danger or damage to property of the customer. Be sure to keep it after installation. • This User manual describes only for our 2.4/5G Dual-band RF Transceiver Module products and can not be used without permission at any time. • Please note that manufacturer is not responsible for any loss or damage caused by using this product for any purpose other than its intended use. • Do not disassemble the equipment at any time to change the function or repair BHAPTICS INC. You must contact the place of purchase and seek professional help. • Note: All BHTTS0100 wireless products comply with the regulations for wireless digital devices in the KC, CE, and FCC regulations. • BHAPTICS INC wireless CDMA products may generate, use and radiate radio frequency energy…

Text truncated - open the document above for the full version.

bHaptics Inc. 70, Yuseong-daero 1689beon-gil, Yuseong-gu, Bldg 3-Unit 503,, Daejeon, Republic of Korea Date: August 20, 2020 Timco Engineering, Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 USA Letter of Authorization We, the undersigned, hereby authorize Nam Taehyeon of BWS TECH Inc. to act on our behalf in all manners relating to application for equipment authorization for FCC ID: 2AJ6BBHTTS0100 including signing of all documents relating to these matters. Any and all acts carried out by Nam Taehyeon of BWS TECH Inc. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from bHaptics Inc. “I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a).” Sincerely, Kiuk Gwak / General Manager

bHaptics Inc. 70, Yuseong-daero 1689beon-gil, Yuseong-gu, Bldg 3-Unit 503,, Daejeon, Republic of Korea Date: August 20, 2020 Timco Engineering, Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 USA RE: Request of Confidentiality for FCCID: 2AJ6BBHTTS0100 To Whom It may Concern: Pursuant to Sections 0.457 and 0.459 of the Commission`s Rules (CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, bHaptics Inc. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give bHaptics Inc. temporary confidentiality of commercially sensitive information prior to product release. The requested permanent and Short-Term Confidential exhibits are listed as follows: PERMANENT & SHORT-TERM CONFIDENTIAL LIST Exhibit Description PERMANENT 1 Block Diagram 2 Schematics 3 Operational Description 4 Part Lists SHORT-TERM 5 Internal Photos 7 User Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be public before the date of the Grant for this application. Sincerely, Kiuk Gwak / General Manager

bHaptics Inc. TACTOSY FCC ID : 2AJ6BBHTTS0100 BWS TECH Inc. External Photos of EUT Page Number : Page 1 to 1 External Photos of EUT Front Rear

TACTOSY Model : BHTTS0100 FCC ID : 2AJ6BBHTTS0100 Manufacturer : bHaptics Inc. POWER : DC 3.7 V Made in Korea This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. LabelInformation 1. LabelLocation 2. Label 25mm 25mm Label

bHaptics Inc. TACTOSY FCC ID : 2AJ6BBHTTS0100 BWS TECH Inc. Internal Photos of EUT Page Number : Page 1 Internal Photos of EUT Internal photo 1 Internal photo 2 bHaptics Inc. TACTOSY FCC ID : 2AJ6BBHTTS0100 BWS TECH Inc. Internal Photos of EUT Page Number : Page 2 Mainboard 1 Mainboard 2 bHaptics Inc. TACTOSY FCC ID : 2AJ6BBHTTS0100 BWS TECH Inc. Internal Photos of EUT Page Number : Page 3 Battery 1 Battery 2 bHaptics Inc. TACTOSY FCC ID : 2AJ6BBHTTS0100 BWS TECH Inc. Internal Photos of EUT Page Number : Page 4 Motor

bHaptics Inc. TACTOSY FCC ID : 2AJ6BBHTTS0100 / BHTTS0100 RF Exposure Report Issue Date : September 15, 2020 RF Exposure 1. Standard Requirement According to §15.247 (i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. 2. Limits : 3. EUT RF Exposure The max. power of channel, including tune-up tolerance is -6.40dBm in middle channel(2.440GHz); -6.40dBm logarithmic terms convert to numeric result is nearly 0.23mW. According to the formula. Calculate the EIRP test result: [(max.power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] * [√f(GHz)] General RF Exposure = (0.23mW / 5mm) x √2.440GHz = 0.07 ... ① SAR requirement: S=3.0 ... ②; ① < ②. So the SAR report is not required.

verify No.021717797638 bHaptics Inc. TACTOSY FCC ID : 2AJ6BBHTTS0100 Report No: BWS-20-RF-0005 FCC Test Report Page Number: Page 2 to 34 BWS TECH Inc. Data of Issue: September 15, 2020 F-LQP-15-43(2) Report Revision TEST REPORT NO. DATE DESCRIPTION BWS-20-RF-0005 September 15, 2020 - First Approval Report bHaptics Inc. TACTOSY FCC ID : 2AJ6BBHTTS0100 Report No: BWS-20-RF-0005 FCC Test Report Page Number: Page 3 to 34 BWS TECH Inc. Data of Issue: September 15, 2020 F-LQP-15-43(2) TABLE OF CONTENTS 1. General Information .................................................................. 4 1.1 Applicant ................................................................................. 4 1.2 Manufacturer .............................................................................. 4 1.3 EUT Description ......................................................................................... 4 1.4 Other Information ....................................................................................... 4 2. Description of Test Facility ......................................................... 5 3. Test Methodology ..................................................................... 6 3.1 EUT Configuration ....................................................................... 6 3.2 EUT Exercise ............................................................................. 6 3.3 FCC Part 15.205 Restricted Bands of Operations ............................................. 6 3.4 Description of Test Modes .......................................................................... 6 4. Summary of Test Result ........................................................................ 7 5. Test Equipment ................................................................................. 8 6. Test Data .......................................................................................... 9 6.1 AC Power Line Conducted Emission ...................................................... 9 6.2 Peak Output Power Measurement............................................................... 10 6.3 Power Spectral Density .................................................................... 13 6.4 6 dB Bandwidth ...................................................................................... 16 6.5 Conducted Spurious Emission................................................................... 19 6.6 Band Edges Measurement ....................................................................... 22 6.7 Radiated Spurious Emission...................................................................... 25 6.8 Antenna Application ........................................................................... 31 Annex A. Test setup photos.................................................................... 32 bHaptics Inc. TACTOSY FCC ID : 2AJ6BBHTTS0100 Report No: BWS-20-RF-0005 FCC Test Report Page Number: Page 4 to 34 BWS TECH Inc. Data of Issue: September 15, 2020 F-LQP-15-43(2) 1. General Information Scope – Measurement and determination of electromagnetic emission(EME) of radio frequency devices including intentional radiators and/or unintentional radiators for compliance with the technical rules and regulations of the U.S Federal Communications Commission(FCC) 1.1 Applicant  Company Name : bHaptics Inc.  Company Address : 70, Yuseong-daero 1689beon-gil, Yuseong-gu, Bldg 3-Unit 503,, Daejeon, Republic of Korea  Phone/Fax : Tel No. : +82-42-867-2468 Fax No. : +82-42-867-2467 1.2 Manufacturer  Company Name : bHaptics Inc.  Company Address : 70, Yuseong-daero 1689beon-gil, Yuseong-gu, Bldg 3-Unit 503,, Daejeon, Republic of Korea  Phone/Fax : Tel No. : +82-42-867-2468 Fax No. : +82-42-867-2467 1.3 EUT Description  Equipment : TACTOSY  Model(s) : BHTTS0100  Operation Frequency : LE: 2402MHz ~ 2480MHz  Number of Channels : LE: Channel: 40  Modulation Method : LE: 1Mbps GFSK  Power Tolerance : +/- 2dB  Input Voltage : DC 3.8 V  Antenna Peak Gain : 0.5 dBi 1.4 Other Information  FCC Rule Part(s) : Part 15 Subpart C §15.247  FCC ID : 2AJ6BBHTTS0100  Test Procedure : ANSI C63.10-2013 KDB 558074 D01 DTS Meas Guidance v05r02  Date of Test : July 24, 2020 to September 15, 2020  Place of Test : BWS TECH Inc. (FCC Registration Number : 287786) #23, Gokhyeon-ro 480 Beon-gil, Mohyeon-eup, Cheoin-gu, Yongin-si, Gyeonggi-do 17031, South Korea TEL: +82 31 333 5997 FAX: +82 31 333 0017 bHaptics Inc. TACTOSY FCC ID : 2AJ6BBHTTS0100 Report No: BWS-20-RF-0005 FCC Test Report Page Number: Page 5 to 34 BWS TECH Inc. Data of Issue: September 15, 2020 F-LQP-15-43(2) 2. Description of Test Facility Site Description Test Lab. : NRRA Designation Number is KR0017. The Certificate Designation Number is KR0017. The Certificate Accreditation Number is KT174. Name of Firm : BWS TECH Inc. Site Location : #23, Gokhyeon-ro 480 Beon-gil, Mohyeon-eup, Cheoin-gu, Yongin-si, Gyeonggi-do 17031, South Korea bHaptics Inc. TACTOSY FCC ID : 2AJ6BBHTTS0100 Report No: BWS-20-RF-0005 FCC Test Report Page Number: Page 6 to 34 BWS TECH Inc. Data of Issue: September 15, 2020 F-LQP-15-43(2) 3. Test Methodology The tests documented in this report were performed in accordance with ANSI C63.10: 2013 and the requirements of FCC Rules Part 15.207, 15.209 and 15.247. Radio testing was performed according to KDB 558074 D01 DTS Meas Guidance v05r02. 3.1 EUT Configuration The EUT configuration for testing is installed on RF field strength measurement to meet the Commissions requirement and is operated in a manner that intends to maximize its emission characteristics in a continuous normal application. 3.2 EUT Exercise The EUT was operated in the engineering mode to fix the TX frequency that was for the purpose of the measurements. According to its specifications, the EUT must comply with the requirements of the Section 15.207, 15.209 and 15.247 under the FCC Rules Part 15 Subpart C. 3.3 FCC Part 15.205 Restricted Bands of Operations (a) Except as shown in paragraph (d)…

Text truncated - open the document above for the full version.

bHaptics Inc. TACTOSY FCC ID : 2AJ6BBHTTS0100 BWS TECH Inc. Test setup Photos of EUT Page Number : 1 Test setup Photos of EUT Below 1GHz Above 1GHz bHaptics Inc. TACTOSY FCC ID : 2AJ6BBHTTS0100 BWS TECH Inc. Test setup Photos of EUT Page Number : 2 Above 18GHz bHaptics Inc. TACTOSY FCC ID : 2AJ6BBHTTS0100 BWS TECH Inc. Test setup Photos of EUT Page Number : 3 Conducted 1 Conducted 2