Technical Specifications
| # | Rule Parts | Frequency Range | Power Output | Emission | Tolerance |
|---|
| 18 | 27 | 665.5 MHz - 695.5 MHz | 108.00 mW | 19M2W7D | 0.048
ppm |
Modular TypeSingle Modular ApprovalConfidentialityLong Term Grant NotesSingle Modular Approval. Output power listed is ERP for frequencies below 1 GHz and EIRP for frequencies above 1 GHz. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for the operations described in this filing. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. For mobile and fixed operating configurations the antenna circuit matching , antenna gain, including cable loss, must not exceed 0.91 dBi at 850 MHz, 3.12 dBi at 1700 MHz and 1.87 dBi at 1900 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no condition may an antenna gain be used that would exceed the 7W erp Part 22, 1W eirp Part 27 and 2W eirp Part 24 power limits.
This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.
