Technical Specifications
| # | Rule Parts | Frequency Range | Power Output | Emission | Tolerance |
|---|
| 2 | 27 | 1.71 GHz - 1.78 GHz | 108.90 mW | 4M53W7D | 0.019
ppm |
Modular TypeSingle Modular ApprovalConfidentialityLong Term Grant NotesPower output listed is ERP for frequencies below 1GHz and EIRP for frequencies above 1GHz.
Single Modular Approval. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.
OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.
The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.
