2AJYU-8XN0003The SIM826A-M2 is the Multi-Band 5G NR/LTE-FDD/LTE- TDD/HSPA+ module which supports R16 5G NSA/SA.

SIM8262A-M2Series HardwareDesign 5GModule SIMComWirelessSolutionsLimited. SIMComHeadquartersBuilding,Building3,No.289Linhong ChangningDistrict,ShanghaiP.R.China Tel:86-21-31575100 [email protected] www.SIMcom.com SIM8262A-M2SeriesHardwareDesignV1.07 www.(U)SIMcom.com Documenttitle: SIM826XX_SIM8X80-M2SeriesHardwareDesign Version:V1.07 Date:2023-05-31 Status:Release GENERALNOTES SIMCOMOFFERSTHISINFORMATIONASASERVICETOITSCUSTOMERSTOSUPPORTTHEAPPLICATION ANDENGINEERINGEFFORTSTHATUSETHEPRODUCTSDESIGNEDBYSIMCOM.THEINFORMATION PROVIDEDISBASEDONTHEREQUIREMENTSSPECIFICALLYFROMTHECUSTOMERS.SIMCOMHASNOT UNDERTAKENANYINDEPENDENTSEARCHFORADDITIONALRELEVANTINFORMATION,INCLUDINGANY INFORMATIONTHATMAYBEINTHECUSTOMER’SPOSSESSION.FURTHERMORE,THESYSTEMVALIDATION OFTHEPRODUCTDESIGNEDBYSIMCOMWITHINALARGERELECTRONICSYSTEMREMAINSTHE RESPONSIBILITYOFTHECUSTOMERORTHECUSTOMER’SSYSTEMINTEGRATOR.ALLSPECIFICATIONS SUPPLIEDHEREINARESUBJECTTOCHANGEWITHOUTNOTICE. COPYRIGHT THISDOCUMENTCONTAINSTHEPROPRIETARYTECHNICALINFORMATIONWHICHISTHEPROPERTYOF SIMCOMLIMITED,COPYINGOFTHISDOCUMENT,GIVINGITTOOTHERS,THEUSINGORCOMMUNICATION OFTHECONTENTSTHEREOFAREFORBIDDENWITHOUTTHEOFFICIALAUTHORITYBYSIMCOM. OFFENDERSARELIABLETOTHEPAYMENTOFTHEDAMAGES.ALLRIGHTSARERESERVEDINTHEEVENT OFGRANTOFAPATENTORTHEREGISTRATIONOFAUTILITYMODELORDESIGN.ALLSPECIFICATIONS SUPPLIEDHEREINARESUBJECTTOCHANGEWITHOUTNOTICE. SIMComWirelessSolutionsLimited SIMComHeadquartersBuilding,Building3,No.289LinhongRoad,ChangningDistrict,ShanghaiP.R.China Tel:+862131575100 Email:[email protected] Formoreinformation,pleasevisit: https://www.SIMcom.com/download/list-863-en.html Fortechnicalsupport,ortoreportdocumentationerrors,pleasevisit: https://www.SIMcom.com/ask/oremailto:[email protected] Copyright©2022SIMComWirelessSolutionsLimitedAllRightsReserved. SIM8262A-M2SeriesHardwareDesignV1.07 www.(U)SIMcom.com VersionHistory DateVersio n DescriptionofchangeAuthor 2022-04- 15 1.00InitialReleaseshaoxuhou 2022-05- 30 1.01 3ChangeTable1andTable59,abouttheWCDMA andLTE-TDDfrequencybandsofSIM8262A-M2and currentconsumption 4ChangeTable46,Table47,aboutrecommended mmWmoduleconnectorandtheantennaport definitionsofmmW 5ChangeFigure31,abouttheconnectiondiagram ofmoduleandmmWmodule Yaling.wa ng Shaoxu hou 2022-06- 23 1.02 8changethefrequencyrangeoftable47, SIM8260C-M2\SIM8262A-M2andSIM8262E- M2 9changetable49,B30\B32\B46module operatingfrequency Xueting wang Wentao tanXin zhang 2022-08- 19 1.03 6ChangeFigure1,2,3andTable3,aboutHardware blockdiagram,M2interfacepinassignment,WLAN ZIFconnectorandPindifferences 7ChangeTable2,addinformationaboutCPU,RAM andROM 8ChangeTable7,aboutthedefinitionanddescription ofpin22,24,28,59,61,63and65 9ChangeTable9,aboutthedefinitionanddescription ofpin65 10ChangeTable42,aboutthedefinitionand descriptionofantennacontrolinterface 11ChangethenoteofTable44 12ChangeTable45,aboutthethe definitionofQTM_THERM_DET 13AddTable47,aboutthenoteofmmW 14ChangeTable36,aboutthedescriptionof LED1#pin10.ChangeTable1,2,3,7,47,48,59,61and Figure32,36,37addtheinformationofSIM8260G- M2 1.ChangeTable8,aboutthePeakcurrent. 2.ChangetheTable1,Table49,59,delete informationaboutB75/B76frequency,increase aboutn75/n76/n257/n258/n260/n261 spectruminformation13.Modifytheantenna definitionofSIM8380G-M2asshowninFigure1 1.ModifyTable2toincreasethedata transmissionthroughputAbout SIM8260C-M2/SIM8280G-M2/SIM8380G-M2data 2.ModifyTable2andaddtheULMIMO informationaboutSIM8280G-M2/SIM8380G-M2in MIMO 3.ModifyTable59andaddtheflow consumptioninformationofSIM8262E/A-M2 module 4.ModifyTable60,addfrequencybandinformation, andmarkPC2/PC3 5.ModifyTable61,abouttheConductedRF receivingsensitivity 6.AddPCIeinterfaceuseforW82,RTL8125B Yaling wang Shaoxu houXin zhang Yaochen SIM8262A-M2SeriesHardwareDesignV1.07 www.(U)SIMcom.com andIPQxxxxapplicationcontentchapter SIM8262A-M2SeriesHardwareDesignV1.07 www.(U)SIMcom.com 2022-09- 23 1.045ModifyTable62,SIM8260G/SIM8280G/SIM8380G- M2rfpowerconsumptiondataupdate 6ModifyTable64,SIM8260G/SIM8280G/SIM8380G- M2sensitivitydataupdate 7Addtable65 Yi zheng Hao ma Yao chen 2022-10- 20 1.051.Addtable2,table45 2.RFmodify 3.Modifypartoferrordescription 4.Addfigure1 5.Updatetable69,figure34 Yi zheng Yao chen 2022-11- 22 1.064NotethesignalofPIN65VIO_1V8addthe filtercapacitortotalcapacityvaluecan’tmore than1uF 5Inchapter5.8illustratethepostofscrewsand screwsusedtofixtheM2moduleshouldhavegood electricalconductivity 6UpdatePIN38nameinfigure27 7Modifylogiclowleveldescriptionintable42 8Deletethemoduleinternalpullupresisterinfigure34 9Inchapter5.7addthermaldissipationexpose copperareasizeofbottomofmodule 10Update5GULMIMOsupportband intable38.UpdateAntennaportdefinitions intable52 Yao chenYi zheng 2023-05- 31 1.071.UpdateIsleepdescriptionintable10. 2.Addtestpointofmodulechapter2.1.3. 3.AddRFcableoperationchapter4.2.3. 4.Updatetable65,modifydescriptionandtableformat. 5.DeleteallaboutSIM8280G-M2information. 6.UpdatePIN60descriptionintable4, updateW_DISABLE1#descriptionin table9. 7.Addtable6. 8.AddmmW547connectdiagraminfigure37. 9.UpdateMCPisJSFCCA5QHAFGA-405Aintable68. 10.Modify(U)SIMchaptercontent. 11.AddVDD_IOpoweronsequenceinfigure14. 12.UpdateTVDD_IOpoweronsequenceintable16. 13.Modifypartofdescriptionerrors. Yaochen SIM8262A-M2SeriesHardwareDesignV1.07 www.(U)SIMcom.com Contents Contents.....................................................................................................................................................................................5 TableIndex.................................................................................................................................................................................7 FigureIndex...............................................................................................................................................................................9 1.Introduction.............................................................................................................................................…

Text truncated - open the document above for the full version.

SIMCom Wireless Solutions Limited Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 02-13-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AJYU-8XN0003 (Module name : SIM8262A-M2) SIMCom Wireless Solutions Limited (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Yongsheng Li SIMCom Wireless Solutions Limited Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 02-13-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AJYU-8XN0003 (Module name : SIM8262A-M2) SIMCom Wireless Solutions Limited (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Yongsheng Li

Rev 1/26/2023 SIMCom Wireless Solutions Limited Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: June 2, 2023 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID or Grantee Code: 2AJYU-8XN0003 SIMCom Wireless Solutions Limited (“the applicant”) certifies that, as of the date of the filing of the application, FCC US Agent, LLC is our designated U.S. agent for service of process for the above referenced FCC ID. SIMCom Wireless Solutions Limited accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. FCC US Agent, LLC accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] Sincerely, SIMCom Wireless Solutions Limited FCC US Agent, LLC Yongsheng Li Tim Payne [signature]

Request for Confidentiality Date: 7/4/23 Subject: Confidentiality Request for: 2AJYU-8XN0003 Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent* 1 Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent BOM Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent* User’s Manual Short Term Permanent Tune up *Note: (Insert Explanation as Necessary) SIMCom Wireless Solutions Limited has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TIMCO in the event information regarding the product or the product is made available to the public. TIMCO will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By: (Signature/Title 2 ) (Print name) Yongsheng Li 1 - The asterisked items (*) require further justification before permanent confidentiality will be allowed. These also currently require review by the FCC under their Permit-But-Ask policy before the grant is issued and can delay completion of an application. Further justification should be added to the note above. One such example for a potted device would be: “The EUT is FULLY potted using a non-removable epoxy based material. Removal of potting material causes irreparable damage to internal circuitry. See photographs exhibits that outline the device before and after potting.” 2 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

C:\Users\jibin.zhang\Desktop\SIM8262A-M2 FCC 签字 \03 POA_Letter.docx SIMCom Wireless Solutions Limited Building 3, No.289 Linhong Road, ChangNing District, Shanghai, China Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 5/24/2023 SUBJECT: FCC Application for 2AJYU-8XN0003 To Whom It May Concern: We, the undersigned, hereby authorize _Heng Zhang at Industrial Internet Innovation Center (Shanghai) Co., Ltd.__ on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Heng Zhang at Industrial Internet Innovation Center (Shanghai) Co., Ltd. on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, (signature) Yongsheng Li (printed name)

C:\Users\jibin.zhang\Desktop\8262A-M2 3IN\Modular Approval Letter_SIM8262A_v2.docx Revision: 140225 Page 1 of 2 Approved By: G Greene MODULAR APPROVAL LETTER SIMCom Wireless Solutions Limited Building 3, No.289 Linhong Road, ChangNing District, Shanghai, China FCC ID: 2AJYU-8XN0003 Modular Approval Requirement Yes No (i) The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. Yes (ii) The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with part 15 requirements under conditions of excessive data rates or over-modulation. Yes (iii) The modular transmitter must have its own power supply regulation. Yes (iv) The modular transmitter must comply with the antenna and transmission system requirements of §§ 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a ‘‘unique’’ antenna coupler (at all connections between the module and the antenna, including the cable). The ‘‘professional installation’’ provision of § 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. Yes (v) The modular transmitter must be tested in a stand- alone configuration Yes (vi) The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. Yes (vii) The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. Yes (viii) The modular transmitter must comply with any Yes C:\Users\jibin.zhang\Desktop\8262A-M2 3IN\Modular Approval Letter_SIM8262A_v2.docx Revision: 140225 Page 2 of 2 Approved By: G Greene applicable RF exposure requirements in its final configuration. (iX) The modular must met the requirements in Section 15.212. KDB 996369 D01 and Part 15.212. Yes Sincerely, (signature) Yongsheng.Li

Module Test Auxiliary Board Antenna USB cable Charger

EUT Appearance Report No.: R2302A0176 TA Technology (Shanghai) Co., Ltd. TA-MB-01-032E Page 1 of 3 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. EUT Appearance a: EUT EUT Appearance Report No.: R2302A0176 TA Technology (Shanghai) Co., Ltd. TA-MB-01-032E Page 2 of 3 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. b: Adapter c: Auxiliary Board EUT Appearance Report No.: R2302A0176 TA Technology (Shanghai) Co., Ltd. TA-MB-01-032E Page 3 of 3 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. d: Antenna Picture 1: Constituents of EUT

Module Chipsets’ details Charger：

TEST REPORT REPORT NUMBER: I23W00013-EMC ON Type of Equipment: SIMCom Module Type of Designation: SIM8262A-M2 Brand Name： SIMCom Manufacturer: SIMCom Wireless Solutions Limited FCC ID: 2AJYU-8XN0003 ACCORDING TO Subpart B, PART 15, RADIO FREQUENCEY DEVICES, ANSI C63.4-2014 Chongqing Academy of Information and Communications Technology Month date, year June 15, 2023 Signature Director Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of Chongqing Academy of Information and Communications Technology. Report No.: I23W00013-EMC Chongqing Academy of Information and Communication Technology Address：No. 8,Yuma Road, Chayuan New City, Nan’an District, Chongqing, P. R. China,401336 Tel: 0086-23-88069965 FAX:0086-23-88608777 Page 2 of 18 Revision Version Report Number Revision Date Memo I23W00013-EMC 00 2023-4-13 Initial creation of test report I23W00013-EMC 01 2023-6-2 Update section 5&6.1 test report I23W00013-EMC 02 2023-6- 15 Update section 3.1&6.1&7.1 test report Report No.: I23W00013-EMC Chongqing Academy of Information and Communication Technology Address：No. 8,Yuma Road, Chayuan New City, Nan’an District, Chongqing, P. R. China,401336 Tel: 0086-23-88069965 FAX:0086-23-88608777 Page 3 of 18 CONTENTS 1. Test Laboratory ............................................................................................................... 4 1.1. Testing Location ............................................................................................................. 4 1.2. Testing Environment ....................................................................................................... 4 1.3. Project data ..................................................................................................................... 4 1.4. Signature ......................................................................................................................... 4 2. Client Information .......................................................................................................... 5 2.1. Applicant Information..................................................................................................... 5 2.2. Manufacturer Information .............................................................................................. 5 3. Equipment under Test (EUT) and Ancillary Equipment (AE) ........................................ 6 3.1. About EUT...................................................................................................................... 6 3.2. Internal Identification of EUT used during the test ........................................................ 6 3.3. Internal Identification of AE used during the test ........................................................... 6 4. Reference Documents ..................................................................................................... 7 4.1. Reference Documents for testing .................................................................................... 7 5. Test Equipments Utilized ................................................................................................ 8 6. Test Results ..................................................................................................................... 9 6.1. Summary of Test Results ................................................................................................ 9 7. Test Results ................................................................................................................... 10 7.1. Radiated Emission ........................................................................................................ 10 7.2. Conducted Emission ..................................................................................................... 15 Annex A EUT Photos ...................................................................................................................... 17 ANNEX B Deviations from Prescribed Test Methods .................................................................... 18 Report No.: I23W00013-EMC Chongqing Academy of Information and Communication Technology Address：No. 8,Yuma Road, Chayuan New City, Nan’an District, Chongqing, P. R. China,401336 Tel: 0086-23-88069965 FAX:0086-23-88608777 Page 4 of 18 1. Test Laboratory 1.1. Testing Location Name: Chongqing Academy of Information and Communications Technology FCC Registration Number: CN1239 Address: No.19 East Road, Xiantao Big-data Valley, Yubei District, Chongqing, People’s Republic of China Postal Code: 401336 Telephone: 0086-23-88069965 Fax: 0086-23-88608777 1.2. Testing Environment Normal Temperature: 21.8-22.5°C Relative Humidity: 43.7-44.3% 1.3. Project data Testing Start Date: 2023-04-07 Testing End Date: 2023-04-10 1.4. Signature Zhao Chao (Prepared this test report) Date Xiao Yu (Reviewed this test report) Date Xiang Luoyong Director of the laboratory (Approved this test report) Date 2023-04-13 2023-04-13 2023-04-13 Report No.: I23W00013-EMC Chongqing Academy of Information and Communication Technology Address：No. 8,Yuma Road, Chayuan New City, Nan’an District, Chongqing, P. R. China,401336 Tel: 0086-23-88069965 FAX:0086-23-88608777 Page 5 of 18 2. Client Information 2.1. Applicant Information Company Name: SIMCom Wireless Solutions Limited Address /Post: SIMCom Headquarters Building, Building 3, No.289 Linhong Road, Changning District, Shanghai, China City: Shanghai Country: China Telephone: 86 21 3157 5100 Fax: N/A Email: Yongsheng [email protected] Contact Person: Yongsheng Li 2.2. Manufacturer Information Company Name: SIMCom Wireless Solutions Limited Address /Post: SIMCom Headquarters Building, Building 3, No.289 Linhong Road, Changning District, Shanghai, China City: Shanghai Country: China Telephone: 86 21 3157 5100 Fax: N/A Email: Yongsheng [email protected] Contact Person: Yongsheng Li Report No.: I23…

Text truncated - open the document above for the full version.

Report No: I22I30073-EMC01-V01 Industrial Internet Innovation Center (Shanghai) Co.,Ltd. EMC TEST REPORT PRODUCT SIMCom Module BRAND SIMCom MODEL SIM8262A-M2 APPLICANT SIMCom Wireless Solutions Limited FCC ID 2AJYU-8XN0003 ISSUE DATE Feburary 2, 2023 STANDARD(S) FCC Part 15, Subpart B, ANSI C63.4-2014 Prepared by: Zhu Zhengshi Reviewed by: Qin Yabin Approved by: Zhang Min CAUTION: This report shall not be reproduced except in full without the written permission of the test laboratory and shall not be quoted out of context. Report No: I22I30073-EMC01-V01 Industrial Internet Innovation Center (Shanghai) Co.,Ltd. Page 2 of 20 CONTENTS 1 SUMMARY OF TEST REPORT ................................................................................................................................ 3 1.1 TEST STANDARD (S) ............................................................................................................................................................ 3 1.2 SUMMARY OF TEST RES U LTS ............................................................................................................................................... 3 2 GENERAL INFORMATION OF THE LABORATORY ................................................................................................ 4 2.1 TESTING LABORATORY ........................................................................................................................................................ 4 2.2 LABORATORY ENVIRONMENTAL REQUIREMENTS ................................................................................................................. 4 2.3 PROJECT INFORMATION ...................................................................................................................................................... 4 3 GENERAL INFORMATION OF THE CUSTOMER .................................................................................................... 5 3.1 APPLICANT ......................................................................................................................................................................... 5 3.2 MANUFACTURER ................................................................................................................................................................ 5 3.3 FACTORY............................................................................................................................................................................. 5 4 GENERAL INFORMATION OF THE PRODUCT....................................................................................................... 6 4.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ............................................................................................ 6 4.2 DESCRIPTION FOR AUXILIARY EQUIPMENT (AE) ................................................................................................................. 6 5 TEST CONFIGURATION INFORMATION ............................................................................................................... 7 5.1 LABORATORY ENVIRONMENTAL CONDITIONS ...................................................................................................................... 7 5.2 DECISION OF FINAL TEST MODE ........................................................................................................................................... 8 5.3 EUT SYSTEM OP E RATI ON ................................................................................................................................................... 9 5.4 EUT CONNECTION DIAGRAM OF TEST SYSTEM .................................................................................................................. 9 5.5 TEST EQUIPMENT UTILIZED ................................................................................................................................................ 9 5.6 MEASUREMENT UNCERTAINTY ......................................................................................................................................... 10 6 TEST RESULTS ......................................................................................................................................................... 11 6.1 RADIATED EMISSION ......................................................................................................................................................... 11 6.2 AC CONDUCTED EMISSION .............................................................................................................................................. 13 ANNEX A: MEASUREMENT DATA ................................................................................................................................ 15 ANNEX B: REVISED HISTORY ....................................................................................................................................... 19 ANNEX C: ACCREDITATION CERTIFICATE .................................................................................................................... 20 Report No: I22I30073-EMC01-V01 Industrial Internet Innovation Center (Shanghai) Co.,Ltd. Page 3 of 20 1 Summary of Test Report 1.1 Test Standard (s) No. Test Standard(s) Title Version 1 FCC Part 15, Subpart B Radio frequency devices 2021/10/1 2 ANSI C63.4 Method of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz 2014 NOTE: 1. According to customer requirements, test and report using the latest version of the standard. 1.2 Summary of Test Results No. Item(s) Standard(s) Verdicts for Single Item Detaied Results 1 Radiated Emission 15.109(a) Pass See section 6.1 2 AC Conducted Emission 15.107(a) Pass See section 6.2 NOTE: The SIM8262A-M2, manufactured by SIMCom Wireless Solutions Limited is a new product for testing. Industrial Internet Innovation Center (Shanghai) Co., Ltd. only performed test cases wh…

Text truncated - open the document above for the full version.

Test Photograph Description: Front view of Conducted Emission Test Setup Description: Side view of Conducted Emission Test Setup Description: Front view of Radiated Emission Test Setup (Below 1GHz) Description: Back view of Radiated Emission Test Setup (Below 1GHz) Description: Front view of Radiated Emission Test Setup (Above 1GHz) Description: Back view of Radiated Emission Test Setup (Above 1GHz)

EUTTest Setup Photos Pic1. Radiated emissions (30MHz-1GHz) Pic2.Radiated emissions (1GHz-18GHz) Pic3.Conducted emissions ***The End***